Digital Commons Network^™

A Study Of Molecular Diffusion In Polymer Solutions By A Microinterferometric Method, Girish T. Dalal

Masters Theses

"A microinterferometric method was used to study the effect of solute concentration on the diffusion coefficient in polymer solutions and also to determine the effect of polymer concentration on the diffusion coefficient. The polyacrylonitrile-dimethylformamide system was used as a means of determining the accuracy of the experimental apparatus and procedure. The non-ionic, water soluble polymer, hydroxyethyl cellulose (commercially known as Natrosol), was used to study this effect with urea and D-glucose as the solutes.

The results obtained for the polyacrylonitrile-dimethylformamide system were in close agreement with the results obtained by Secor, which meant that the experimental technique is accurate enough …

Analog Simulation Of The Voigt Solid, Richard F. Pohl

Masters Theses

"A method of reducing a mixed partial differential equation with boundary conditions to a form suitable for programming on the analog computer is developed. Presented along with the computer program set up to be used on the EAI TR-48 analog computer is a systematic check procedure to indicate possible computer malfunctions and programming errors. The results of the computer simulation are presented and supported with observed data"--Abstract, page ii.

An Algorithm For The Synthesis Of Nand Logic Networks Using A Diagrammatic Approach, Donald Robert Nelson

Masters Theses

"A diagrammatic approach is presented for the synthesis of multilevel NAND networks realizing combinational logic expressions. The network synthesized is restricted to only uncomplemented inputs. The synthesis algorithm involves the determination of minimum sum of products and product of sums expressions for a Boolean function, construction of an α-ß diagram from these expressions followed by implementation with NAND gates directly from the diagram. The resulting network is a minimal or near minimal NAND gate realization of the given function. The algorithm is applicable to completely or incompletely specified Boolean functions and is extended to include NOR synthesis"--Abstract, page 2.

A Study Of The Effect Of A Square Cutout On The Moment Distribution In A Simply Supported Rectangular Plate Under Normal Concentrated Load By The Moiré Fringe Method, Taher F. Raja

Masters Theses

"Plexiglass models were used to produce Moiré fringes for two different geometrical shapes. The moments in the case of a simply supported rectangular plate with a normal concentrated load were found using the Moiré fringes which directly give the gradients at all points of the surface of the model. The variation of the moments due to a square cutout was also studied by this method. As a check for the experimental method, the analytical solution was presented for the plate without a cut-out. The Moiré method yields moments to an accuracy of 3 to 15 percent, however, care must be …

A Nonlinear Sampled Data Feedback Control System Employing Pulsed Thrust Position Control, John D. Corrigan

Masters Theses

"This thesis shows that reaction jet thrust pulses, each of constant amplitude and time duration, in conjunction with sampled data error information can provide satisfactory position and/or attitude control for space vehicles.

Incremental phase-plane analysis of the system yields a technique for determining system response and suggests a means of compensation. Control system response for the vehicle under the influence of external forces is shown to be satisfactory by digital computer simulation"--Abstract, page ii.

Phase And Amplitude Distributions Of An Unsymmetrically Fed Ground Plane Aperture, Leslie Blumberg

Masters Theses

"An anechoic chamber for use in the B-12 KHz range was designed and built for the purpose of obtaining the far field patterns of antennas and radiation systems. This chamber was evaluated and compared with various types of anechoic chambers from the standpoint of their "room performance."

The anechoic chamber is essentially a room lined with absorbing material, effective at microwave frequencies. The purpose of the absorbing material within the room is to present the reflection of the energy incident upon the walls of the room.

Measurements of the far field radiation pattern of an aperture in a ground plane, …

Minimum Cost Data Collection Techniques For Circulation Control At The University Of Missouri At Rolla Library, John Peter Shewchuk Sr.

Masters Theses

"Data collection is beginning to assume increased importance in the field of data processing. This thesis investigates a method for quantitatively selecting a portion of the library to place on an automated circulation control system that uses data collection as an entry into a data processing system.

The circulation function of the library was considered to be an inventory problem. Titles were considered as items of inventory and circulation of that title was considered to be a "sale" of that item. The IMPACT method was used to distribute items (titles) in a sample by age. Various ages were found to …

The Effect Of Combined Torsional And Bending Loads On A Channel Beam With One End Restrained From Warping, David M. Schaeffer

Masters Theses

"Channel beams have been designed with the main purpose of giving large resistance to bending while the torsional strengths are known to be relatively small. In this experiment, a cantilevered channel beam was loaded with a concentrated load at the free end, first through the experimentally determined shear center and then through the centroid of the cross section. For each loading condition, the strains were measured with the aid of SR-4 strain gages placed at intervals along the length of the beam. With the aid of a computer, the strains were converted into longitudinal stresses and these stresses were compared …

Modification Of The Hydraulic Jump By Submerged Jets, Edward Leon Tharp

Masters Theses

"Tests were performed in order to determine the effect of submerged jets injecting water into the base of the hydraulic jump. The jump was studied in terms of the following properties: specific energy of the flow leaving the hydraulic jump, length of the hydraulic jump, tailwater depth, and wave formation properties. These properties for the hydraulic jump with submerged jets were compared to the natural hydraulic jump.

Results of the tests indicate that: submerged jets at any angle tested tend to decrease the specific energy of the water leaving the jump and are more effective than the impulse-momentum principle indicates, …

Analysis Charts For Single And Multi-Span Gabled Frames, John (Chung-Su) Ma

Masters Theses

"A method for analyzing single and multi-span gabled frames using analysis charts is presented. This method requires considerably fewer computations than methods previously used (such as the moment distribution and slope-deflection methods). Analysis charts are presented for single gabled frames having fixed or pinned ends at ground level, and charts are also presented which can be used to efficiently analyze multi-gabled frames.

The data for the analysis charts were obtained using matrix techniques in conjunction with the digital computer. These techniques are described"--Abstract, page ii.

The Anodic Dissolution Of Magnesium In Aqueous Solutions, Chen-I Lu

Masters Theses

"The anodic dissolution of magnesium was studied in MgCl₂-KC1 and MgBr₂-KBr mixtures at 25, 40, and 55 °C. The parameters of the study were current density, concentration of magnesium ion, and temperature. The concentration of magnesium ions was varied from 0.001 to 1 N holding the ionic strength constant at 1.5. The weight loss of magnesium from the electrode during electrolysis was determined by weighing the electrode both before and after electrolysis. The current was measured with a sensitive milliammeter. The range of the current densities was varied from 0.001 to 0.1 amps·cm^-2. The …

Test 934: John Deere 4020 Syncro-Range Lpg, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 937: John Deere 1020 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 940: John Deere 3020 Syncro-Range Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 932: Ford 5000 8-Speed (Gasoline), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 945: David Brown 770 Selectamatic (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 943: Oliver 1550 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Space-Charge Effects As Determined By Initial-Field Conditions, Tsing-Yih Wang

Masters Theses

"A method for calculating the current density passing between two parallel plane electrodes for different values of positive charges as a function of " field at the emitter to field for no charge ratio " is presented.
The problem of the potential distribution between the electrodes has been solved for one particular case in which the positive charges are assumed to be proportional to the field at the emitter. The expressions for the electric field, the velocity of charges, and the charge density as a function of the potential are also presented and plotted as a function of the distance. …

Fast Flux Measurement By A Single Multi-Threshold Foil, Kenneth Lawrence Cage

Masters Theses

"The purpose of this investigation is to determine the fast neutron spectrum by use of a single multi-threshold foil. The foils and the elements which constituted the foils were selected by the following criteria: availability of adequate cross-section data, energy dependence of the given reaction, gamma radiation emitted during decay and the half-life of the daughter. The two foils selected were an In-Fe- P pellet, and ALCOA 2509 (Al-Ni). The gamma spectrum of each constitute was stripped from the composite spectra using a least-squares fit. The activation results were utilized to calculate the fast flux using the weighted orthonormal method. …

Plastic Design Of Steel Frames For Minimum Weight, I-Chen Hung

Masters Theses

"The purpose of this study was to develop a method for weight minimization of the plastically designed frame, braced normal to its plane of action, and composed of prismatic steel members. The method accounts for the non-linear relationship between weight and moment capacity for both beams and columns. Reduction in the pure-bending fully-plastic moment in the presence of axial loading and both beam-column instability and overall frame instability due to sidesway are taken into account. Provision is made for minimization of frames employing standard sections as well as for frames whose built-up members may be chosen from a continuous spectrum. …

A Study Of Modified Plug Designs For A Globe Valve, Robert W. Wagner

Masters Theses

"This thesis presents an empirical study of the characteristics of a cylindrical skirted disk valve used as a flow regulating device. Holes were drilled in two separate removable cylinders, which, when respectively attached to the valve plug adapter, provided control of the flow rate. These cylinders could be moved to permit exposure of more or less flow area by means of the valve stem and crank mechanism. At the closed position of the valve no holes were available for flow within the differential pressure zone of the valve, while at the full-open position all the drilled holes were within the …

Approximate Solution Of The Momentum And Energy Equations For Partially Ionized Argon, Sir-Hoi Chen

Masters Theses

"Based on available experimental data, the transport properties of partially ionized argon gas have been determined by solving the integral equations of momentum and energy conservation by an approximate method. The momentum and the energy conservation integral equations are solved simultaneously by an iteration method by assuming both parabolic and cubic velocity and temperature profiles separately. The results are compared with the case of linear velocity and temperature profiles"--Abstract, page iii.

Permeability And Additive Sorption And Extraction In Lubricating Greases, Hsiu-Hsiung Lin

Masters Theses

"An important goal in the study of lubricating greases is the determination of the mechanism of additive action in lubricating greases and the effect of additive concentration on the improvement of particular properties. As a step in this direction, one aim of this investigation was an attempt to determine whether grease additives are sorbed on the thickener surface, or are dissolved in the oil phase, or if a combination of these effects prevails. Exploratory sorption and extraction experiments were run by Tu using greases thickened with lithium hydroxystearate and Baragel and using only one concentration of additive. More detailed studies …

The Shrinkage Characteristics Of Plastic Clay, Edward De Santis

Masters Theses

"This investigation was conducted to determine the shrinkage properties of a clay soil whose structure had been artificially altered in the laboratory. Various percentages of dispersing and flocculating agent were added to the soil and the shrinkage curves plotted.

The shrinkage curves of the chemically treated soil were compared with those of the untreated soil. The values of the theoretical and observed shrinkage limits were also compared to determine the validity of the standard shrinkage limit test which, at present, does not take into consideration the structure of the soil.

An explanation of the differences in the shrinkage characteristics of …

The Development Of A Modified Soil Shear Vane, Vernelle Truman Smith

Masters Theses

"The purpose of this investigation was to determine how the soil shear graph could be modified to measure more accurately values of shear strength of fine-grained, cohesive soils. Several modifications were tried, however, the one that gave the most satisfactory results consisted of a vane and base plate mechanism.

A red clay of high plasticity obtained from a local cave was tested in both the natural or undisturbed state and in the remolded state. The only variable was the moisture content. Compaction effort was the same for all remolded specimens. Tests were conducted on undisturbed samples taken with thin walled …

Bending Of Isosceles Right Triangular Plates, Ping-Tung Huang

Masters Theses

"In this thesis the series expansion method is used to obtain the moments and deflections of an isosceles right triangular plate bent by arbitrary transverse loads. The method is based on using an antisymmetric load on a square plate. Two boundary conditions are solved and the numerical results obtained for these cases are tabulated"--Abstract, page ii.

Kinetics And Mechanisms Of Base-Catalysed Reactions, Rohit Panalal Sheth

Masters Theses

"Base-catalysed reactions normally involve complex series of transformations. their kinetics is usually governed by a variety of equilibria, participating in the overall and concurrent processes as well as by competitive side-reactions that interfere with the normal course of such reactions. Mechanisms which have been proposed, by and large, are primarily based on product, by-product and intermediate analyses together with some scattered kinetic and isotopic evidence. In the cases where kinetic studies have been attempted, highly complex mechanisms have usually been proposed due to the frequent necessity of using heterogeneous media or employing involved mathematical treatments to describe the kinetics of …

The Development Of The Sonic Pulse Technique And Its Comparison With The Conventional Static Method For Determining The Elastic Moduli Of Rock, James Harold Deatherage

Masters Theses

"The determination of the elastic moduli of rock has long been a problem to the geophysicist, mining engineer and the civil engineer. There is a considerable amount of literature on determining Young's modulus by the sonic pulse technique. However, the use of this technique to determine the three elastic constants, Young's modulus, shear modulus, and Poisson's ratio from measurements of both the longitudinal and shear wave velocities presents some difficulties, especially in the method of accurately determining the shear wave velocities.

In this thesis, what is believed to be a new method of measuring shear wave velocities in the laboratory …

Decarboxylation Of Malonic Acid In Aqueous Solutions, Ramesh Natwarlal Gujarathi

Masters Theses

"The rate of decarboxylation of malonic acid in aqueous solutions was studied over a range of concentrations, pH's, and temperatures. The catalytic effect of various divalent metallic ions was also studied at a pH of 0.3. these studies did not support a truly unimolecular decomposition as the experimental order was found to be slightly greater than one. An empirical relation for the rate of decarboxylation was formulated in which the undissociated malonic acid and the monovalent malonate ion were the reactive species.

A possible mechanism of decarboxylation due to solvent activation was postulated. No pronounced catalytic effect due to the …

A Numerical Solution For Beam-Columns On Non-Linear Foundations, Wendelin H. Mueller Iii

Masters Theses

"A program for Matlock's recursive method, a numerical method which will analyze beams and columns with linearly varying spring supports, was modified to enable the solution of such members supported by non-linear springs. This modification was accomplished by an iterative technique. The final result of this paper is a computer program which can be used to solve beams or columns with non-linear spring supports, giving as output the deflection, slope, moment, shear, net load and curvature of the structure at uniformly spaced locations"--Abstract, page ii.