Digital Commons Network^™

The Transient Dynamics Of Plane Mechanisms, Navnit Chhaganlal Mehta

Doctoral Dissertations

"Accurate determination of dynamic characteristics of mechanisms has become more important with increased requirements on speed, efficiency and precision. Many devices, such as circuit breakers and computing mechanisms, operate under purely transient conditions and actuation time places a serious limitation on the response of the system of which these devices are a part.

In the classical analysis, whether it be graphical or analytical, the mechanism is assigned a specified position and state of motion from which the forces required to produce the motion can be determined. The inverse problem of specifying the driving force and determining the resulting motion, which …

Numerical Approximation To Performance Predictions Of Gas-Drive Reservoir With Or Without Gas-Cap And Gas Injection, Jagannath Rao Ghole

Doctoral Dissertations

"The pressure-saturation transient history for a hydrocarbon reservoir is solved for solution-gas, gas-cap and injected-gas drives assuming the saturation-pressure variations depicted by Muskat, under specific restrictive assumptions. A prototype reservoir system and its transient pressure saturation distribution under production is systemized on an IBM 360-Model 40 Computer which allows the definition of the transient behavior of saturation with pressure declination and fluid withdrawal for preassigned initial saturations of the oil, water and gas phases. This analysis is then modified for the existence of a gas-cap and for the re-injection of produced gas volumes for pressure maintenance considerations and the ensuing …

Matrix Computer Analysis Of Curvilinear Grid Systems, David Leon Fenton

Doctoral Dissertations

"A general equilibrium-stiffness method of matrix structural analysis was adapted and applied to the solution of the member end forces and moments of each of the members in a curvilinear structural grid system. A structural system of this nature is commonly used as the supporting framework for a "steel-framed dome", in addition to being a basic structural component in many aerospace applications. An integral part of the development of the analysis was the development of a computer program to perform the many complex operations required to obtain the solution. The engineer, by supplying the appropriate structural data and load data …

Stress Analysis Of A Wall Footing Subjected To External Vertical Loads And Overturning Moments By The Finite Element Method, Adil Godiwalla

Masters Theses

"This investigation pertains to the stress analysis by the finite element method of a wall footing subjected to external vertical loads and external overturning moments. This problem has been reduced to a two-dimensional stress analysis problem by taking a unit length of the wall. A rectangular plate - element is used throughout this investigation. The development of the matrix equations is shown and the solution is performed by digital computer. Stresses in the horizontal direction show essentially linear variation which is in agreement with simple structural theory, while stresses in the vertical direction show severe perturbation near the column load. …

Mode Analysis Of The Unsymmetrically Fed Ground-Plane Aperture, John G. Hemmann

Masters Theses

"The problem of radiation from a waveguide-fed ground-plane aperture perturbed with a wedge-shaped dielectric insert was examined more carefully. The work initiated by Blumberg was continued, using a greater range of dielectric constants and smaller increments of angle.

Aperture field measurements were made over a range of dielectric constants for each wedge angle, in order to determine the change in amplitude distribution as a function of permittivity. Aperture phase measurements were also taken for selected angles. These were used with the amplitude data to predict, using numerical integration, the far-field radiation patterns of the perturbed aperture. Far-field patterns were then …

Study Of Mass Transfer Through Porous Water-Repellent Membrane As A Function Of Membrane Thickness And Rates Of Heating, Yalamanchili Babu Rao

Masters Theses

"The object of this investigation was to study the mass transfer coefficients through porous water-repellent membranes, and their dependence on membrane thickness and rates of heating, and to compare experimental correlations with theoretically based equations. The membranes used during the experimental work were made of glass fiber treated with Teflon suspension and aluminum sulfate. The mechanism involves evaporation and condensation on opposite sides of a vapor-filled porous membrane. Salt water evaporates from one interface of a non-wettable, porous membrane, diffuses through the vapor filled pores, and condenses to fresh water at the other interface of the membrane. This transfer may …

Molecular Diffusion In Polymer Solutions By A Microinterferometric Method, Surendra V. Desai

Masters Theses

"The object of this investigation of molecular diffusion in aqueous polymer solutions was to study the effect of solute concentration on the differential diffusion coefficient and also to study the effect of polymer concentration on the mean integral diffusion coefficient. For this purpose a microinterferometric method was used. Two non-ionic, water soluble polymers, Carboxymethylcellulose (CMC) and Carboxypolymethylene (Carbopol), were used in the study with D-Glucose as a solute.

The differential diffusion coefficient was found to increase with increases in solute concentration in all cases. For CMC, the integral diffusion coefficient at first decreased with increasing polymer concentration but became constant …

Computer Solutions To Depletion Drive Hydrocarbon Systems, Tu Kao Chen

Masters Theses

"Three computer analyses of oil production by depletion drive have been developed. These analyses, Tarner's method of depletion drive oil production prediction, depletion drive performance productions of Schilthuis, and depletion drive calculations by a finite difference material balance, have been programmed for computers having Fortran IV compilers and a minimum of 40 K bytes of core storage capacity. Modifications have been incorporated in the last two techniques for (a) constant volume injection of produced gas, (b) the presence of a gas cap, (c) gas-cap injection of produced gas volumes, (d) varying water encroachment and production, and/or, (e) varying sweep efficiencies …

Small-Signal Impedance Of A Junction Diode At High Injection Levels, John E. Lundy

Masters Theses

"A mathematical expression for the driving point impedance of a junction diode at high injection levels is developed. To evaluate the impedance versus frequency characteristic of a diode, it is necessary to know the minority carrier lifetime as a function of injection level and doping density in the base (lightly doped) region, the junction area, and the base width. The interesting characteristic of the diode impedance at high injection levels is the inductive reactance displayed by the diode.

The expression is developed by solving the differential equation for charge flow in the base region of a diode assuming space-charge neutrality …

Dynamic Response Of A Simply Supported Beam To An Accelerating Point Load, Joseph Victor Cusumano

Masters Theses

"An analysis based on linear theory is presented for determining the dynamic response of a simply supported beam on an elastic foundation acted upon by a moving time dependent point force with axial forces included. This thesis extends the present theory to include an analysis of a point force accelerating uniformly across the beam. In particular, it is shown that the customary resonance conditions which are prevalent for a point force moving with uniform velocity no longer exist for the case of a point force accelerating uniformly across the beam.

The basic problem and its solution are presented for a …

Film Boiling From Horizontal Plates With Low Thermal Capacity, K. M. Ragsdell

Masters Theses

"The object of this investigation was to obtain data for saturated film pool boiling from a low thermal capacity flat plate at atmospheric pressure. A test plate, constructed from resistance strip, was placed horizontally in a pool of liquid, and was heated electrically. Refrigerant-11 and nitrogen were used as the boiling liquids. Heat transfer results were obtained in both fluids over a temperature range of approximately 1200F⁰ (400-1600⁰F). Surface size, roughness and orientation effects were observed for flat horizontal heated surfaces with one dimension near the most dangerous wavelength. No surface material effect was observed. Excellent correlation of the data …

Shutdown Reactivity Worth Of Reactor Control Rods By A Subcritical Multiplication Method, Leslie Roger Conner

Masters Theses

"Two modified subcritical multiplication methods for measuring the reactivity worth of control elements were developed and investigated. The first involved the calibration of a subcritical count interval by the asymptotic period method. The second involved the calibration of a subcritical count interval by a rod interchange with the reactor regulating rod which had previously been calibrated by the asymptotic period method. The accuracy of these methods is relatively poor. this inaccuracy is due to shadowing effects and to the spatial harmonics which exist in the core. An investigation of the spatial harmonics to determine the best location for the neutron …

Mass Transfer From A Torus Shaped Body, Kamalesh Suryakant Desai

Masters Theses

"A mathematical model for molecular diffusion in a torus was derived. Handlos and Baron have assumed a system of tori in their eddy diffusion model for liquid-liquid extraction from droplets. However, the effect of torus curvature was neglected in their studies. Since they assumed the torus could be represented by an infinite cylinder. In this study, the effect of torus curvature was considered on the concentration profile and the fraction of the solute extracted. The partial differential equation describing the model consists of three independent variables, and a finite difference technique was employed for the solution of the mathematical model. …

Plastic Deformation Of Thin Plates With A Spherical Indenter, Benjamin Jen-An Chang

Masters Theses

"A method of determining the stress distribution in a thin plate deformed with a spherical indenter is presented in this report. The analysis is formulated in cylindrical coordinates and utilizes the basic principles of plasticity (von Mises yield criteria, Luwig stress-strain equation, Hencky Deformation theory, etc.). The problem is solved through the utility of a displacement function that, by virtue of its definition, automatically assures that the condition of volume constancy is satisfied. The boundary conditions are selected on the basis of having average, or integrated, effects corresponding to the physical constraints of the problem. Numerical integration is introduced to …

A Class Of Pattern Recognition Machines, Shaw Yih Chung

Masters Theses

"The classification of signals through the use of pattern recognition techniques may be viewed as a statistical classification problem since at least some pattern classes are analog signals which have been contaminated by additive noise. In order to represent these signals at the input of a pattern classifier they are sampled and a vector and an m-dimensional vector space used to describe the pattern. Consequently, these pattern samples are processed to determine the parameters of the statistics. In this study the additive noise was assumed to be Gaussian in nature. This study was based on a priori knowledge of the …

Synthesis Of Filters Using Distributed Rc Networks, Mario Nader Nader

Masters Theses

"This paper deals with the problem of realizing filter and delay functions by means of distributed RC devices. The method is made possible through the use of a distributed RC network which possesses rational admittance parameters. The technique of approximating transfer functions using polynomial factors that are ration in e[superscript (a square root of s] is explained. These factors are used to approximate the magnitude and phase characteristics for a low-pass filter. This filter is then realized using the admittance functions studied by Wyndrum, the "s->W" transformation, and Richard's theorem. Those factors are then used to approximate high-pass and …

A Shunt-Feed Antenna System On A Small Supersonic Aircraft, Larry Joseph Nanney

Masters Theses

"A technique was developed which successfully predicted the reactance of a shunt cavity exciting the air frame of a small supersonic aircraft as an antenna. This was possible by the use of the wire above a ground place approximation which closely defined the characteristic impedance of the shunt fed cavity. A correlation was made between the maximum values of parallel resistance of the shunt fed cavity and the length of the air frame or portions of the air frame, which at this point were found to be a quarter wavelength in length. Measurements of the impedance of the shunt-feed system …

Optimum Fin Spacing For Heat Transfer Per Unit Length Of Heat Exchange Section, Glenn Ellis Miller

Masters Theses

"This thesis presents the results of an experimental study of the heat-transfer ability of a finned surface as a function of the spacing between fins. The results are expressed as heat transfer per unit length of finned section rather than the heat transfer per fin. Circumferential steel fins, seven and three-quarter inches in diameter, were used for the investigation. Data was taken for fin spacings ranging from zero to one and one-half inches. The experimental heat-transfer rate to atmospheric air was determined by measuring the volume of saturated steam which condensed in the test section over a measured time interval. …

Estimation Of Regional Trends In Gravity Using Gram Orthogonal Polynomials, Stanley Dean Thompson

Masters Theses

"A computer program is presented which estimates the trend in a rectangular array of gravity measurements. It is assumed that the regional trend of gravity may be estimated by a low-order polynomial. The method of least-squares is applied to solve for the low-order polynomial which best approximates this trend. Gram orthogonal polynomials are used in the solution of this least-squares surface fit. The program is tested on a known polynomial and on some hypothetical Bouguer gravity data and found to approximate the ʺregional trend of gravity in these cases. The importance of eliminating any significant noise in the observations before …

The Economics And Design Of Desalination By Evaporation Through Porous, Water-Repellent Membranes, Kuei-Hsiung Yang

Masters Theses

"The economics of desalination by evaporation through porous, water-repellent membranes has been studied in this investigation. Using reasonable assumptions this desalination process was found to be economical with the principal advantage being the simplification of multi-stage flash-type evaporation. Based on this process, two different methods were designed and studied by means of computer calculations for a 10 million gallons product water per stream day desalting plant. One method was based on a membrane evaporator and a heat exchanger and was designated Method I; and a combined evaporation-heat exchanger system was designated at Method II. The major factors affecting the economics …

Fault Detection In Combinational Networks, Alexander Rahm

Masters Theses

"This paper presents an algorithm for locating a failure in combinational logic networks, which is a problem of importance in the maintenance of computer systems. The procedure is based on the "path sensitizing" idea for fault detection. The networks considered are non-redundant, consisting of AND, OR, and NOT elements. The class of faults investigated is that which causes a connection to appear to be logically suck-at-one or stuck-at-zero, and only single failures are treated. It is shown that the failure is generally located to a specific "fault group"--Abstract, page 2.

Reviews Of Books And Papers In The Computer Field, James H. Tracey

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

Analysis Of The N-Wire Exponential Line, Edward C. Bertnolli

Electrical and Computer Engineering Faculty Research & Creative Works

A new approach to distributed network analysis is presented with the analysis of the n-wire exponential line as example. This approach provides the distributed network's transfer matrix in a form useful for both transient and steady-state network calculations. © 1967, IEEE. All rights reserved.

A Plastic Stress Analysis Of Cylindrical Wafers Under Elastically Deformable Compression Plates, Robert L. Davis, J. W. Jackson

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper represents an analysis of the pressure distribution occurring in axially loaded cylindrical wafers with, and without, elastic radial constraints. The purpose of this report is to demonstrate the resulting stress patterns that occur in short compression specimens frequently used in determining material properties, and in the opposed-anvil, or Bridgman-type, high-pressure cells. The influence of radial constraints, material strain hardening, wafer diameter-to-height ratio, anvil or plate deflection, and the wafer-anvil interface friction on the resulting stress distributions have been examined. The integrated normal stress distribution across the specimen surface has been verified experimentally via numerous tests in which each …

Skid Testing With An Automobile, Rolands L. Rizenbergs, Hugh A. Ward

Kentucky Transportation Center Research Report

A study was conducted to evaluate the theoretical and practical aspects of using an automobile as a testing device for measurement of pavement slipperiness. Every parameter and significant event in the excursion history of a skidding automobile was measured and recorded. The resultant skid-resistance values, twenty-five in all, were compared and correlated. As a result of the study, the measurement of time in the velocity increment between 30 mph to 20 mph was selected as an interim standard test. A number of experiments were also conducted to aid in the interpretation of test results and to establish control tolerances for …

Dynamic Response Of Plates Due To Moving Loads, Theodore F. Raske, Alois L. Schlack

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An analysis based on linear theory is presented for determining the dynamic response and the conditions of resonance for a simply supported rectangular plate acted upon by two types of moving loads corresponding to: (1) a point force of variable magnitude oscillating about a fixed position on the plate, and (2) a point force of constant magnitude traveling in a circular orbit about a fixed position on the plate. In addition to the ordinary resonance as produced by a variable magnitude load concentrated at a fixed position on the plate, resonance of the plate may occur due to the changing …

Test 957: Farmall 706 (Gasoline), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 956: Farmall 706 (Lpg), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 955: Farmall 706 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 953: Minneapolis-Moline G1000 Diesel (Also G1050 Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …