Digital Commons Network^™

Investigation To Improve Recovery Of Copper And Gold From A Refractory Ore, Raymond Franklin Cathcart

Masters Theses

"Results of tests presented in this paper indicate that the Santa Maria del Oro ores might be processed by a method which should yield a gold recovery of 96 to 98 percent and a copper recovery of about 78 percent, both figures subject to an increase with further work and study of the problem.

In the method of processing outlined in Figure IX, the ores, mixed as under present operating procedure, would be crushed to minus 20-mesh and roasted with ten pounds of sodium chloride per ton of feed in a multiple-hearth, down-draft roaster at temperatures varying to a maximum …

Oil Field Corrosion, Edwin Harry Barsachs

Masters Theses

"The corrosion of metals in the petroleum industry has become an important engineering problem. The rapid increase during recent years in costs of steel has caused the industry to intensify its efforts to minimize corrosion losses in pipe lines and well casings. An industry-wide research program has resulted in the development of improved methods of controlling corrosion of such equipment.

The purpose of this paper is to assemble and correlate the information concerning the different causes, the detection, and the mitigation of corrosion of metals used in the oil fields of the world. The causes that are presented in this …

A Study Of Radio Frequency Converters And Mixers, James J. Skiles

Masters Theses

"This thesis will present a detailed discussion of the principles of frequency conversion and the problems attendant to the design of converter stages. The topic of harmonic conversion has been singled out for a more extended treatment than is now available in the literature. This topic is the subject of the experimental investigation portion of this thesis. Harmonic conversion has applications in U-H-F receivers as well as in "Double Superheterodyne Receivers".

The discussion given to the frequency converter in the first section of this thesis will be without regard to any applications. General theory will be stressed, and most of …

An Experimental Evaluation Of Explosives In Blasting Limestone And Granite, Harve Preston Nelson

Doctoral Dissertations

"The purpose of this study was the evaluation of military and commercial explosives. A standardized index of effectiveness was used as the basis of comparison.

Testing was conducted at the Experimental Mine of Missouri School of Mines and Metallurgy at Rolla, Missouri, and at Graniteville, Missouri. At the school mine, 16 drift rounds, 8 slab rounds and 70 quarry tests were made in the dolomitic limestone. This rock, known locally as the Quarry Ledge of the Jefferson City formation, is of Ordovician Age"--Abstract, page ii.

Uses And Advantages Of Short Period Delay Blasting Systems In Mining And Quarrying, Irving C. Falk

Masters Theses

"One of the most recent developments in blasting practice is that of applying the principle of short period delay electric blasting. In this type of electric blasting, instead or having all holes fire at one time, each hole or group of holes is a shot in itself. To provide a short period delay, of a few thousandths of a second, between each hole or group of holes, either millisecond (split-second) delay electric blasting caps or a suitable delayed action blasting switch may be used.

Short period delay electric blasting systems were originally developed for use by quarries in or near …

Special Text, St 55-30-1, Transportation Intelligence, November 1950, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

This is a textbook used at the Army Transportation School run by the Transportation Corps. In the 1950s, military schools related to one of the Army Technical Services were run by that service.

The modern US Army vision of the technical intelligence developed during World War II. Shortly before World War II, Army Technical Services had been instructed to set up intelligence sections in the offices of their chiefs. The technical services were bureaus which supplied weapons, equipment, and services to the Army, managed the careers of officers in a particular branch, trained specialists, and organized and trained special purpose …

News Bulletin - October-November, 1950, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A three page newsletter of the Airline Medical Examiners Association which was published on an irregular basis from 1950-1957. The newsletter provided news about civil aviation medicine and information related to the organization.

Importance Of Unconformities To Oil Occurrence In Montana, Robert E. Evenson

Bachelors Theses and Reports, 1928 - 1970

Although the majority of geologic structures in Montana have been tested in the search for petroleum, only a few have been found to contain commercial quantities of either oil or gas, and with each successive dry hole, producers are becoming more and more wary of investing capital in new wells located on structural features alone. It is apparent that if new oil and gas fields are to be found in Montana, exploration must be done on the basis of some­thing other than structure, or combined with structure.

The Renova "Syenite" Porphyry Madison County, Montana, James H. Clement

Bachelors Theses and Reports, 1928 - 1970

Unique feldspar porphyries, syenitic in appearance, and granitic in composition, form an unusually thick sill intrud­ing pre-Cambrian Belt graywacke about eight miles south of Whitehall in southwestern Montana. Commercial deposits of gold and silver ores occur nearby, and may possibly be genet­ically related to the porphyry, although direct association is not evident. The geologic age is believed to be late Cretaceous or early Tertiary, and the sill may be related to the Tobacco Root batholith.

Structure Of Southwestern Montana, Donald W. Levandowski

Bachelors Theses and Reports, 1928 - 1970

Intrusions of granitic rocks on a large scale are commonly found in the central part of folded mountain systems. Igneous rocks, intrusive and extrusive, are widespread in the mountains of southwestern Montana. An examination of the structural pattern of this area indicates that the fold trends form a radial pattern. How and why this pattern formed and its relation to the igneous activity in the area have not yet been discussed in the literature.

Was Assimilation Important In The Formation Of The Boulder Batholith?, Richard Marvin

Bachelors Theses and Reports, 1928 - 1970

Examination of a rock suite from the northern end of the Boulder batholith reveals that four of the eight criteria for assimilation as given by Grout are present. Thus, in the opinion of the writer, there is evidence and trends to signify assimilation, but no indication of the importance that it played in the formation of the Boulder batholith.

The Bighorn Mountains, The Little Rocky Mountains And The Bowdoin Dome Uplifts, E. J. O'Connell

Bachelors Theses and Reports, 1928 - 1970

The purpose of this paper is to secure an actual figure describing the amount of uplift in the Bighorn Mountains, the Little Rocky Mountains and the Bowdoin Dome. To the writer’s knowledge, the amount of uplift in the areas mentioned has not been determined before. Such a figure could be useful in structural studies of Montana and Wyoming, because the amount of uplift is a fair measure of the intensity of orogenic forces; also, the amount of uplift is a prerequisite to the determination of the amount of erosion.

An Investigation Into The Precipitation Of Copper From Mine Water By Cupric Copper Reduction, And The Subsequent Precipitation Of Copper As Cuprous Chloride, Jack T. Gentry

Bachelors Theses and Reports, 1928 - 1970

The objective of this thesis is to determine the possibility of applying a different method to the re­covery of the copper dissolved in the Butte mine waters, and thereby precipitate a purer cement copper with greater efficiency and less iron consumption.

Safety And Health In Mining, John Philip Lacke

Masters Theses

"The mining industry has long been criticised severely because of its high rate of accident occurrence. Statistics, which, however, are not strictly comparable show that the accident-frequency rate in all mining is currently about three times and the accident severity rate is about seven times as great as the average for general industrial work in the United States. Figures such as these are by no means comforting to mining men. They constitute a challenge to the industry that cannot be ignored.

It must be remembered that any type of mining is more hazardous than most or the other major occupations. …

Efficiency Studies Of The Effect Of Moisture On The Power Consumption Of Mine Scrapers, Georges J. Vigier

Masters Theses

"Many years of practice have resulted in the standardization of several types of scrapers which are now commonly manufactured for use in mining. Although experience has brought out much information on scraping operations, no systematic studies of the efficiency of mine scrapers have been carried out before the experimental works done in the last few years at Missouri School of Mines and Metallurgy. "Purpose of Problem": The purpose of this present study is to consider the effect which moisture in the muck has on the efficiency as regards power consumption and amount of material scraped, of different types of mine …

Effect Of Removed Web-Section On Critical Load For I-Beam Columns, Henri Simon Rigo

Masters Theses

"This investigation deals with a series of column tests of aluminum I-sections which have a perforated web. Specifically, the tests show that the weight is decreased without decrease in strength. Several basic assumptions are made in the design of a column. The physical action of a column is idealized in the derivation of formulae which will predict within reasonable limits the load which the member will sustain. In a given installation of non-homogeneity of material, kinks, uneven bearing, lack of symmetry due to riveting or welding, stress concentration and many other disturbing factors not in agreement with these assumptions may …

A Comprehensive Traffic Survey Of Phelps County, Missouri, Clifford D. Muir

Masters Theses

"The purpose of this study is two fold. The first of these purposes is to serve as a pattern or guide for any county or township wishing to conduct a comprehensive traffic survey. The second purpose of this study is to provide traffic classification and other data on a typical county system of rural roads. Today, many counties in the United States are faced with the problem of inadequate roads, due to the modernization of the American farm. While they realize this problem exists, may county governments have developed no organized method of studying and determining their needs...When the author …

Rockbursts, Christian Maurice Colson

Masters Theses

"This paper does not pretend to originality; it is an attempt to bring to light the causes and the mechanism of rockbursts, as exposed in the literature. Furthermore, an endeavor has been made to give a comprehensive picture of the prediction, prevention, and control methods of rockbursts. Briefly, what has been done in the field of rockbursts, and what remains open to investigation is submitted to the reader. The choice of rockbursts as a thesis subject appears to be justified by the geologic interest of the question. Detailed geologic observations, and particularly the recording of all the structural features which …

Solid Solution In The Series Sodium Tungsten Bronze, Lithium Tungsten Bronze And Tungstic Oxide, Godrej F. Doctor

Masters Theses

"The tungsten bronzes are a series of anionic substitutional solid solutions of alkali metal metatungstates and tungstic oxide. They are neither alloys nor intermetallic compounds, the term tungsten bronzes was adopted because of their remarkable metallic properties, e.g. luster, specific gravity and especially high electrical conductivity, which resembles to that of graphite. Due to its chemical inactivity and beautiful shades of color, it is used as a coating, especially in the plastic industry and for other ornamental products. The properties and the structure of these bronzes have not been investigated entirely satisfactory; within the last twenty years, only a few …

A Study Of The Efficiency Of Split-Second Delay Electric Blasting Caps In Underground Limestone Mining, John B. H. Fitzwilliam

Masters Theses

"The introduction of electric blasting caps have delay intervals of the order of one-half to one second proved of advantage in many aspects of underground mining, particularly development work. Their use spread, until they now supersede fuse-and-cap firing wherever possible. Split-second delay electric blasting caps are a comparatively recent development from conventional delay caps. They have been found of practicable use in quarrying operations, and have been applied in many phases of underground mining. While evidence, to show that short-delay firing in quarrying is more efficient than instantaneous firing, is becoming increasingly conclusive, it remains to be proved that split-second …

Effects Of A Reverse Order Of Firing Using Millisecond Delay Electric Blasting Caps In A Quarry Operation, Reginald John Jones

Masters Theses

"Evidence of the steady increase in the production of quarries is a reflection of the improved blasting practices that are being used. New explosives, the new millisecond electrical blasting caps and the endless experimentation carried on by both manufacturer and operator continue to aid or better the old methods of quarry blasting. In many instances the better results were obtained from practices hitherto unknown or at least unused. This report describes the results obtained from comparing quarry rounds shot in the accepted firing order and those shot in the reverse order of firing. The purpose of the report is to …

Construction And Operation Of A Vacuum Retort Pilot-Plant For Distillation Of Alloys, Robert Frederick Doelling

Masters Theses

"The widespread appearance of large scale vacuum systems operating commercially in the micron range of pressures has initiated a new field of industrial endeavor, vacuum engineering. The ever increasing number of applications of vacuo in commercial processes and laboratory research has stimulated the design and improvement of vacuum equipment, and at the present time equipment may be obtained to meet practically any need. In turn, the variety of available tools has directed the engineers attention to improving old processes and developing new ones through the utilization of vacuum techniques ... The possibility of producing a relatively high purity silver in …

Grouting And Freezing Unconsolidated And Water-Bearing Strata, Robert Walter Heins

Masters Theses

"The process of grouting has undergone many changes in recent years. A definition must, therefore, be inclusive. "Grouting" is the process of injecting, under pressure, into soil and rock through boreholes or other openings, any solution or suspension containing materials that harden, stiffen, or swell in void spaces to produce a solid or semi-solid impermeable mass. Various cements, chemicals, asphalts and clays are the materials used in the grouting process. The use of tailings is also considered a type of grouting, since some hardening or stiffening takes place. Cement grout relies on chemical reaction to bring about setting or hardening …

An Experimental Study Of Crystallization In Opal Glass, William C. Rous

Masters Theses

"Opal glasses are well known from use in such forms as ointment jars, lighting globes, wall panelling [sic], and decorative effects in glass vases. Cryolite, fluorspar, and sodium fluosilicate are used in varying proportions in most glasses of this type. Since little is known of the mechanism of crystallization in opal glass, there is a definite need of gathering further information on this subject. This information is of particular interest to the manufacturers whose products consist of this type of glass. Further information would aid in control of the characteristics desired and perhaps would allow a more economical control"--Introduction, page …

Velocity Studies In A Vertical Pipe Flowing Full, Robert Franklin Tindall

Masters Theses

"The purpose of this investigation is to install a hard drawn copper pipe approximately 1/2 inch in diameter, and approximately 35 feet long in a vertical position. The copper pipe is to have pressure takeoff points at various distances along the length of the pipe. The purpose of these takeoffs is to measure the pressure of the water at the point of takeoff in the pipe. The water is to be forced into the pipe, assisted by gravity, thereby causing a pressure of some measurable quanity [sic] greater than absolute zero pressure. The discharge was to be by volumetric measurement, …

Effects Of Sand Admixtures On The Physical Properties Of Soils, Necati Kanatsiz

Masters Theses

"The purpose of this study is to determine the effects of sand admixtures on the physical properties of soils. Soil may be defined as a heterogenous [sic] collection of rock and mineral fragments whose decomposition and disintegration have been brought about by the action of physical, chemical, and biological forces, working singly or in combination...In the conviction that the study of soils, with respect to highway engineering, is becoming more and more important this study was undertaken in order to learn whether the addition of sand would lead to desirable results, and if not, at least secure some further addition …

Leaflet No 1000 - Rate Of Milking With Machines - Further Results From Western Australian Herds, R. A. Bettenay

Bulletins 1 - 2999

IN an earlier article by this Department (Vol. XXVI No. 2 PP. 99-104) some introductory remarks were made on a study being conducted on the rate of milking by machine, and preliminary findings were recorded. The conclusion was reached that the rate of milking on most farms was too slow, it being considered that in the vicinity of five minutes per cow should be sufficient under machine milking and that, if the teat cups were left on for a longer period than this, damage to the udder was likely to follow.

Effects Of Higher Speed Explosives In Drift Rounds, Harve Preston Nelson

Masters Theses

"There is much still to be learned of what takes place in the actual explosive zone of a rock blast. Many factors, both known and unknown, have individual and collective effects. A program is now in progress by the Mining Department of Missouri School of Mines and Metallurgy for developing and preserving information about some of the factors affecting the use of explosives. Some work has been done. More is now being completed by Messrs. R. J. Jones and J. B. H. Fitz-William. Present plans call for continuing the research and gathering data on this subject which is so important …

A Comparative Study Of Some Rock Drill Bits, Charles Roger Knopp

Masters Theses

"The detachable single-use rick-drill bit has attracted considerable attention in the mining industry of the United States during the past few years. While this type of bit has been used for some time in other countries, it has been only recently that these bits have been manufactured in the United States. It was decided to test this type of bit and make a comparative study of a single-use bit and a widely used detachable rock-drill bit"--Introduction, page 1.

Calibration Of Weirs By Means Of Critical Flow And Specific Energy, Robert A. Rapp

Masters Theses

"For many years man has been relying more each day upon metering devices to measure the flow of fluids in industry. The orifice, orifice meter, venturi meter, pitot tube, nozzle, flume and the weir have been employed, each having its own particular advantage.

In this parade of metering progress, the contracted weir has long been the forgotten brother of the suppressed weir. In almost every textbook on hydraulics or fluid mechanics, the following words appear, "end contractions are to be avoided where the weir cannot be calibrated". This skepticism and the length or absurdity of some contracted weir formulas led …