Digital Commons Network^™

Cutting School Building Costs Through Educational And Architectural Planning, Construction Details, And Contracting, Alan Dale White

Graduate Student Research Papers

It was the purpose of this paper to point out the factors pertaining to educational and architectural planning, construction details, and contracting which collectively tend to lower the building expenditures. Specific architectural details such as wall cost comparisons, structural framing, and material recommendations have been purposely deleted. The suggestions presented herein, general in nature, do not seriously restrict architectural imagination, ingenuity, or creativity.

The Irish Plumber And Heating Contractor, August 1962 (Complete Issue)

Building Services Engineering

No abstract provided.

A Study Of A Continuous Photochemical Reactor, John Calvin Roe

Theses

The purpose of the investigation was to construct a continuous photochemical reactor, to reinvestigate certain portions of the work of Gaertner and Kent (7) and to extend the work to include some of the more common photochemical reactions.

A reactor of annular design with an elliptical light reflector, similar to that of Gaertner and Kent, was designed and constructed. The sources of radient energy were a cold General Electric T-6 Germicidal Lamp and a hot General Electric UA-9 Lamp.

The photochemical decomposition of oxalic acid sensitized by the uranyl ion was utilized as an actinometer. Fifty continuous runs were accomplished …

Program Evaluation And Review Technique, Anthony Immaculate Agresta

Theses

The problem of planning, controling and evaluating complex projects both engineering and non-engineering has existed as long as the projects themselves. In the past the approach of management to this problem has been one which was based heavily on the use of historical information. There have been very few attempts to predict and control the occurrence of the objective event of these projects.

This thesis deals with a review of this problem and a new approach to the planning, control, and evaluation of these complex projects. This new approach is the Program Evaluation and Review Technique (PERT) which was developed …

Urea Adduction Of Oleic Acid, Leroy A. Dahm

Theses

The purpose of this project was to study the separation of the fatty acids and waxes found in cranberry skins by means of the formation of urea adducts. Current literature does not indicate equilibrium and rate data as controlled by mixing energy for the separation. Therefore this rate data was determined for the adduct formation of oleic acid, one of the constituents of cranberry skins.

A saturated aqueous solution of urea was used in the preparation of the urea adduct of oleic acid. Methyl isobutyl ketone and methanol were investigated as solvents for the fatty acids. Methyl isobutyl ketone was …

Zirconium-Hafnium Equilibria, Edwin Otto Eisen

Theses

Equilibria in the thiocyanate-methyl isobutyl ketone process for the separation of zirconium and hafnium were studied. The effects of average thiocyanate concentration, feed acidity, and feed zirconium concentration on the separation factor of hafnium and the distribution coefficients of zirconium and hafnium were investigated. The hafnium separation factor was significantly dependent on the feed acidity but only slightly affected by the average thiocyanate concentration. No conclusion was reached about the effect of the feed zirconium conoentration on the hafnium separation factor. The polymerization of thiocyanic acid was found to be strongly dependent on the average thiocyanate concentration.

Vapor-Liquid Equilibria System : Carbon Tetra-Chloride, Toluene, N-Heptane, Joel Philip Pearlstein

Theses

A study was made of the vapor-liquid equilibria of the ternary system: carbon tetrachloride (CCl₄), n-Heptane (C₇H₁₆) and Toluene (C₇H₈). An Othmer still was used for the determination of the equilibria and the liquid and vapor compositions were ascertained by refractive index and density measurements. A comparison between experimental values and theoretical values was made using the Margules 3-suffix ternary equations for the correlation. Although the Margules equations did not correlate the experimental data very well, this is most likely due to the fact that the ternary solution was close …

Extraction Of Technical Grade Lactic Acid With N-Butyl Alcohol, Joel Howard Kaplan

Theses

A possible step in a proposed industrial method for purifying and concentrating technical grade (44 per cent) lactic acid was investigated. The proposed method is the extraction of lactic acid from the crude grade by n-butyl alcohol, esterification of the extract by n-butyl alcohol and hydrolysis of the resultant purified ester to pure lactic acid. The extraction of lactic acid by n-butyl alcohol from the crude grade was the topic considered in this paper.

The extraction process was carried out at temperatures of 10.2°C, 25.0°C, 40.0°C and 60.00C using both U. S. P. lactic acid (85 per cent) and technical …

Preparation Of Aryl Sulfones By Sulfonation In The Presence Of Phosphrous Oxychloride, Donald Frederick Kruse

Theses

The use of phosphorus oxychloride as a dehydrating agent in the sulfonation of aromatic compounds has been investigated, particularly with respect to the formation of aryl sulfones. The sulfonation of several aromatic compounds using reagent grade sulfuric acid and phosphorus oxychloride has produced sulfone yields which exceed yields reported in the literature and obtained by more tedious methods. The presence of alkyl side groups on the benzene ring generally favors high yields of sulfone; whereas the presence of halogens generally reduces the yield. Sulfone formation is shown to be dependent upon the reactant ratios and upon the reaction time and …

Jurisdictional Disputes Within The Construction Industry, Dominick Joseph Magarelli

Theses

Work assignment disputes, known as jurisdictional disputes are common in the construction industry. They are not only costly but annoying as well, The construction industry has always been plagued with this type of dispute because each of its many craft unions regards certain types of work as a proprietary right. They jealously guard against any encroachment of their area of activity by other unions. Sometimes lines of demarcation between the various jurisdictions are not clear. Also, the development of new products and methods often brings with it clashes between unions each of whom claim exclusive right to the work assignment. …

The Corrosion Of Zinc-Stainless Steel Couples In Flowing Sea Water, Henry Shaw

Theses

The effect of sea water flow on passivated stainless steel 304 coupled to high purity zinc was studied for more than 1000 hours at 23°C. The corrosion of both members of the couple increased over that of the metals alone. Zinc suffered severe pitting while the Stainless Steel was not visibly corroded, When the metals were exposed alone, zinc corroded uniformly while the stainless steel was not affected at all. The use of zinc coupled to Stainless Steel is not recommended in systems exposed to sea water.

Stress-Corrosion Cracking Of Brass, Paul A. Fossey

Bachelors Theses and Reports, 1928 - 1970

the mechanism of stress-corrosion cracking of brass has been sought for many years. Investigators have proposed many mechanisms, but each of these mechanisms has always had several drawbacks. This paper presents an account of experimental work done in the laboratory on this subject and compares it to the work of previous investigations. It evaluates the mechanisms presented by investigators and shows the failures of these mechanisms. A theory of Nitrogen Embrittlement is presented and an evaluation of this theory with experimental work follows.

The Irish Plumber And Heating Contractor, March 1962 (Complete Issue)

Building Services Engineering

No abstract provided.

Farm Water Storage : Circular Brick Reservoirs, R P. Harington

Journal of the Department of Agriculture, Western Australia, Series 4

A circular brick tank is a cheap and efficient water storage which can be easily built on any farm. The method described below by Kimberley Research Station manager R. P. Harington was used to build a swimming pool—storage on the station.

Flooding And Salt Problems In The Wheatbelt, Department Of Agriculture, Western Australia

Journal of the Department of Agriculture, Western Australia, Series 4

VALUABLE land has become salty in parts of the West Australian agricultural areas because most of the surrounding land has been cleared and developed for agriculture.

This salting of a small proportion of the land is part of the price paid for the development of agriculture in this State.

Drainage is not the answer to the wheatbelt flooding and salt land problems.

A more practical approach is to limit runoff from sloping land, and to make good use of salt-affected land by growing salt tolerant perennial pastures on it, says the Soils Division of the Department of Agriculture.

Irrigating Dry Season Crops In The Ord Valley : How To Prepare Land For Sowing, D F. Beech

Journal of the Department of Agriculture, Western Australia, Series 4

THE best way to grow dry season crops of safflower, linseed and rapeseed under irrigation in the Ord Valley is by sowing on to broad flat ridges, separated by small furrows 3 ft. 6 in. apart.

This system of sowing is called the "corrugation" method.

Orchard Planting Systems, K T. Whitely

Journal of the Department of Agriculture, Western Australia, Series 4

HAVING decided on the location of the orchard and the types of fruit trees to be planted, the grower is still faced with the problem of layout of the trees in the new orchard.

The Effects Of Tillage Implements On Cereal Yields, H M. Fisher

Journal of the Department of Agriculture, Western Australia, Series 4

Careful soil preparation is essential for cereal crops grown without fallow on clover ley land.

Crops give better yields where the land is broken up with a mouldboard or disc plough rather than a scarifier or similar machine.

The implements differ appreciably in their capacity to control weed growth and this is largely responsible for variations in cereal yields. "Takeall" disease is reduced by efficient weed control.

A Modified Copper Hot Water System, F J. Fielder

Journal of the Department of Agriculture, Western Australia, Series 4

A good supply of hot and boiling water for cleansing and sterilising utensils is essential for hygienic milk production.

Dairy Instructor F. Fielder, M.D.D., describes an efficient and economical modification of a copper hot water system for this purpose.

SINGLE copper units of 14 or 16 gallon capacity to supply hot and boiling water for the dairy are no longer good enough for most dairy farms.

Australian Tractor Tests : International A554d : Report On Test No. 36 (Farmers' Edition), G H. Vasey, W. F. Baillie

Journal of the Department of Agriculture, Western Australia, Series 4

THIS Report is taken from the full Technical Report No. 36; results are shown here in briefer form: fuller explanations are added.

Values quoted may be rounded out to two instead of three significant figures; to this extent the values may differ slightly but not significantly from those shown in the Technical Report.

Check Your Milking Machine, T Pavy

Journal of the Department of Agriculture, Western Australia, Series 4

MILKING machine efficiency testing carried out by officers of the Department of Agriculture's Dairying Division have shown that many machines are not up to standard.

One reason for this is that farmers do not check their machines regularly.

Water Cooling Towers : For Cooling Milk On The Dairy Farm, K Needham

Journal of the Department of Agriculture, Western Australia, Series 4

Experience on dairy farms where water cooling towers have been installed has shown that the quality and grading of milk and cream has been improved and maintained, particularly during the summer.

MOST defects in the quality of dairy produce can be attributed to the activity of micro-organisms which cause spoilage.

The Importance Of Rapid And Complete Milking, K Needham, W. G. Robinson

Journal of the Department of Agriculture, Western Australia, Series 4

COMPLETE withdrawal of milk from the udder as quickly as possible after the process of "let-down" has started, is an essential in good milking; management.

Development Of A Simple Bar Method Thermal Conductivity Test, V. J. Flanigan

Masters Theses

"A linear flow bar method type apparatus was set up for finding thermal conductivities by comparison techniques. Comparison technique consist of using a standard specimen where the thermal conductivity is known and comparing it to the unknown specimens to find their conductivity. Apparatus of this type usually uses thermocouples for the required temperature measurements, but thermistors were used in this experiment. The thermistors used required calibration to measure accurate temperatures and this was accomplished by using the known temperatures of the changes of state of some common materials. Five alloys were used to evaluate the method: SAE 1020 steel, gray …

A Study Of The Stress Distribution Around Circular Openings Using Multilayered Photoelastic Material, Donald Frank Haber

Masters Theses

"Stress analysis as applied to mine openings ranges from the completely empirical to the completely theoretical. However, it is only through the ultimate utilization of the two methods that a guide to the Interpretation of mine stress phenomenon may be obtained. The bridge between the two approaches lies in the field of model study. Specifically, this is an Investigation into determining the feasibility of using multilayered photoelastic materials in models such that a more exact approximation of the underground stress distribution around mine openings can be made.

The two major objectives in this study for determining the feasibility of using …

Porous Cooling Of A Pile, Tarsem Singh Purewal

Masters Theses

"In this investigation the problem of a limiting case of steady state one dimensional solid-fluid Newtonian heat transfer is examined in which an incompressible non-heat generating coolant fluid is flowing through a heat generating porous plate.

The effect of grain size on the Newtonian heat transfer in the porous plate with various kinds of internal heat generations is determined analytically. The temperature difference between the solid and the coolant fluid through the porous plate is determined. All the previous studies assume that in the porous plate, coolant fluid temperature and solid temperatures are approximately equal. This analysis eliminates this simplifying …

Permeability Of Poly (Ethylene Terephthalate), James G. Harvey

Masters Theses

"Corrosion is a phenomenon which has been the subject of extensive research, in order to find a way to control or completely stop it. Two general methods, either placing the material which corrodes in an anti-corrosive atmosphere or protecting the material which corrodes from the corrosive atmosphere, are the chief means of preventing corrosion today.

The second method is probably most widely used presently. One of the most important methods of protection is by means of organic protective coatings, or paints, but at best these only retard corrosion, due to the fact that corrosive media e.g. water vapor, ions etc. …

Transpiration Cooling Of A Heat Generating Porous Plate, M. K. A. Hameed

Masters Theses

"This investigation is a continuation of a thesis by T. S. Purewal. Several of the simplifying assumptions made by the above author are either ignored or the justifiability of such assumptions is probed into in order to obtain a more rigorous solution. Effects of the assorted grain size, non-Newtonian cooling, direction of coolant flow, thickness of the porous heat generating plate, specific heat of the coolant, and compressibility of the coolant are investigated in this thesis. Variation of maximum temperature of both coolant and the solid material for different types of heat source distribution are also studied.

As the grain …

Thermal Conductometer For Liquids, Yuan-Kai Chang

Masters Theses

"The published data pertaining to the thermal conductivity of liquids are of such a character that it is very difficult to determine from them the correct value, or the temperature coefficient for any liquid.

Most of the published values of thermal conductivity for liquids are evaluated at one particular temperature. It is the purpose of this investigation to design, construct and calibrate a thermal conductometer for liquids over a temperature range of 30°F to 200°F.

Since water and glycerol were the only liquids found by this investigator with published data on their conductivities as a function of temperature, they were …

A Study Of The Electro-Chemical Injection Of Ca(Oh)₂ Into Pure Kaolin Clay, Sam Michael Savas Jr.

Masters Theses

"The work presented in this thesis is the investigation and study of a possible and successful means of injecting an electrolyte solution into a fine grain soil mass with the use of electric current and to measure some of the changes of its physical properties. A NoKarb Georgia Kaolin Clay was treated by passing a preferential electrolyte solution of Ca(OH)₂ using direct current for a period of one and six days. The tests performed during this investigation included the following: (a) tri-axial tests, (b) atterberg limits, (c) pH determination, (d) moisture content change (from treatment), (e) visual settling of treated …