Digital Commons Network^™

A Study Of A Method For Determining Properties Of Metals At High Strain Rates., Warren Heidbreder

Masters Theses

"An experimental method has been developed for determining the tensile and other physical properties of metals under high loading rates. Experimental equipment was designed, fabricated and tested. It was desirable to keep the equipment simple and inexpensive so that it could be used by operators Lacking experience in electronics and high-speed photography which are required for some of the more sophisticated methods now in use. The energy for pulling the specimens is supplied by smokeless gun powder. The firing of a cartridge into a closed cylinder with movable piston accomplishes the breaking of the specimen. A record of the time, …

Hydraulic Transportation Of Coal In Open Flumes., Nallapu Narayan Reddy

Masters Theses

"The objective of this study is to design a simplified form of hydraulic transportation system using open-flumes and operated by gravity in pitching coal seams. This type of system is to be used in conjunction with mining by hydraulic methods where the water used for the extraction of coal can also be used for the loading and transport functions"--Introduction p. 1

Determining Stability Of Nonlinear Control Systems Via Lyapunov's Method., John Joseph Komo

Masters Theses

"The problem undertaken in this thesis is to present Lyapunov's method of stability as i t applies to control systems and to use it in the stability analysis of nonlinear control systems. The variable gradient method of generating Lyapunov functions is presented since this seems the best general procedure for obtaining Lyapunov functions. Also, the integration of matrices method is presented as a comparison. ii

Procedures for the use of the variable gradient method and the integration of matrices method are written and several examples are used to illustrate these procedures.

It is concluded that Lyapunov's method is very definitely …

Analysis Of A Char-Forming Ablator, William J. Reilly

Masters Theses

"The purpose of this thesis is to conduct an analytical analysis of a char-forming ablation material. This is one phase of ablation heat transfer.

Fourier's general equation for one dimensional heat conduction is transformed to moving coordinates and is then solved using the applicable boundary conditions. Solutions of this equation are valid for initial studies in ablation heat transfer"--Abstract, page ii.

Determination Of The Standard Free Energy Of Formation Of Zr₃S₂, Peter E. Otten

Masters Theses

"The Knudsen effusion method was used to find the equilibrium magnesium pressure for the reaction

3 Zr (s) + 2 MgS (s) = 'Zr₃S₂' (s) + 2 Mg (v)

By using known standard free energy data for the formation of magnesium sulfide and by using the equilibrium magnesium pressure, the standard free energy of formation of Zr₃S₂ was calculated and could be expressed by the equation

Δ F° = -139,800 + 49.13 T cal/mole

in the temperature range 900 to 1100°C.

It was also found that Zr₃S₂ was the zirconium …

Swelling Properties Of Putnam Soil, Oscar M. Palma

Masters Theses

"Volume change of Putnam soil under different moisture contents and the swelling pressure developed by the soil at the same moisture contents were investigated using standard test procedures.

The theory of one dimensional consolidation of Terzaghi was reviewed as well as the literature on swelling and swell pressure.

It was found that swell depends mainly on the initial water content, while swelling pressure depends mainly on the dry density of the soil"--Abstract, page ii.

The Design, Construction, And Calibration Of A Hydrodynamic Journal Bearing Testing Machine., John H. Roberts

Masters Theses

"The purpose of this investigation was to design, construct, and calibrate a journal bearing testing apparatus. The design, construction, and operation of the apparatus are described.

Two bronze bearings with length to diameter ratios of 1.0 and 0.5 were tested using a gravity oil reed system. The speed and the location of inlet oil supply were varied, and the resulting coefficients or friction, oil flow rates, outlet oil temperatures, bearing shell temperatures, and eccentricities of the bearings were determined. These results were evaluated and compared with theoretical solutions.

The results compared favorably with the theoretical solutions and substantiated the use …

A Thermodynamic Study Of The Molybdenum-Sulfur System At 1100⁰C, Seth C. Schaefer

Masters Theses

"A static method was used to determine equilibrium sulfur pressure for molybdenum-sulfur mixtures at 1100°C.

The results obtained were:
(1) The molybdenum disulfide phase was stable in a sulfur pressure range of 1.023 x 10^-5 to 6.026 x 10^-1 atmospheres. A range of non-stoichiometry from MoS_2.00 to MoS_2.22 was determined under these conditions.
(2) The upper limit of sulfur content of molybdenum sesquisulfide (Mo₂S₃) is nearly stoichiometric.
(3) The extent of solid solution of sulfur in molybdenum is approximately 1.5 atomic % (0.5 wt %).
(4) Molybdenum sesqu-isulfide (Mo₂S_{3 …}

Small Signal Gain Analysis For A Seven Cavity Klystron Amplifier., William E. Hord

Masters Theses

"The problem was to find a suitable method of using the digital computer to calculate the small signal gain characteristics of a seven cavity klystron amplifier. Background material relevant to the problem was reviewed. The differential equations for small signal conditions in a gridless gap klystron were developed. These equations were then solved and put in a matrix form suitable for digital computer analysis. Suggestions for additional development were proposed"--Abstract p. ii

Convective Heat Transfer In Small Enclosed Air Spaces., Joseph Charles Kroutil

Masters Theses

No abstract provided.

Infrared Modulation Using The Field-Effect Properties Of Germanium., Lloyd E. Brunkhorst

Masters Theses

"The absorption of infrared radiation, by free carriers in germanium, has been used to amplitude modulate infrared radiation. In the experiment, a space charge layer consisting of free carriers is established at the inner surface of a germanium sample by using the field-effect technique. Infrared radiation of a wavelength to which the germanium is transparent is then Internally reflected from this surface. The infrared radiation passes twice through the space charge layer for each internal reflection. With each pass through the space charge layer, the amplitude of the transmitted infrared is decreased. Amplitude modulation of the transmitted infrared is accomplished …

Thermocouple Shape Influence On Response In A Dynamic Compressible Fluid Atmosphere, Philip J. Steger

Masters Theses

"This investigation was performed to determine whether the geometrical shape of a thermocouple used to measure the temperature of a dynamic fluid atmosphere had any affect on its recovery factor and time response.

A converging nozzle was used to establish a dynamic fluid stream in which shaped silver solder junctions of copper-constantan thermocouples were tested. The velocity of the working fluid, air, was about 1000 ft/sec at the test point.

The investigation was successful, within experimental limits, in determining that the recovery factor of a bare thermocouple junction is not influenced by geometrical shape The results agreed substantially with available …

A Graphical Solution Method For The Tchebychev Elliptic Function Filter, Gene S. Luckfield

Masters Theses

"This thesis is concerned with the design of the Tchebychev elliptic function filter. The Darlington synthesis procedure is discussed and salient points from Darlington's paper needed for the design of this filter are presented.

It is shown that the design of the Tchebychev elliptic function filter requires a knowledge of the elliptic functions, particularly the elliptic sine. Since the use of these functions is not common, a brief review of their properties is presented.

Using the elliptic functions, a development of the equations describing the behavior of the Tchebychev elliptic function filter is given for the case of a normalized …

A New Method Of Making Stainless Steel Powder By Electrochemical Disintegration, Mohammed Maher Saad

Masters Theses

"This paper describes a new method of making austenitic stainless steel (18/8) powder by electrochemical disintegration. The method used an external direct current applied to a heat-treated stainless steel anode, and a platinum cathode in an electrolyte of an aqueous solution of 20% HNO₃ and 1% H₂SO₄ by weight respectively.

Special attention has been paid to the size distribution of sieve and sub-sieve sizes, and the following ranges were found: approximately one-half lies between the limits of 200 and 325 mesh, and one third is finer than 325 mesh, with the remainder about +200 mesh, average …

A Rc Active Delay Time Network., Robert Sun-Wu Han

Masters Theses

"This thesis presents a method for performing an approximate synthesis of a variable delay time network by using RC elements and active analog computer circuits. The delay networks discussed here can provide delay times which range from zero to 96 milliseconds for inputs with frequencies which range between zero 2nd 5 cycles per second.

Basically, the procedure involves approximating the delay time transfer function, e^-jwTd , by the ratio of two polynomials each of which is represented by a finite series of terms. The ratio is then shown to be easily synthesized by RC elements and analog computer circuits. …

Liquid Mercury Embrittlement Of Thin-Walled 2024 Aluminum Tubes, Edward J. Beckemeyer

Masters Theses

"The dislocation theory, Zener-Stroh crack model, and the Petch relationship, which correlates fracture stress and grain size, were used to analyze the embrittlement of 2024 aluminum alloy tubes by liquid mercury.

Surface energy ratios, [formula], were determined for biaxial stress ratios of 1/2, 1, ∞. The values of the surface energy ratios considered were 4.24, 1.79, 1.46, respectively. As part of this study, an approximate Nabarro-Peierls frictional stress was calculated for each stress ratio"--Abstract, page 2.

Interaction Curve For A Beam Column., Mahendra Khushalchand Sanghavi

Masters Theses

"The theoretical interaction curve for a circular section is established. Experimentally the interaction curve f or a beam-column with a varying circular cross section, is established. The effect of stress history is discussed, and the comparisons of different interaction curves are made"--Abstract p.i

An Approach To Correlate Pulsed Radar And Photographic Data, Nasir Ahmed

Electrical and Computer Engineering ETDs

The Jet Propulsion Laboratory Lunar Program, which is supported by the National Aeronautics and Space Administration has two major projects underway. These are Ranger and Surveyor. The Ranger Project is in the flight stage whereas Surveyor is still in hardware development. The equipment of Ranger 3, 4, and 5 spacecrafts includes a radar altimeter to obtain radar reflection data, and a vidicon camera to obtain close-up pictures of the moon's surface. The data obtained in these flights will thus be available for analysis and comparison using the techniques outlined in this thesis.

Derivation Of A Method To Determine Reactions And Deflection Of A Continous Beam On An Elastic Foundation, Louis Richard Fuka

Masters Theses

“The purpose of this thesis is to develop a method for determining the reactions and deflection curve of continuous beams partially supported by an elastic foundation. The method involves representation of an arbitrary loading and the intermediate redundant reactions as Fourier Series. Redundant intermediate reactions are determined by the solution of an equal number of linear equations. The remaining reactions are determined by the application of statics.

This same method can be used for simply supported beams on an elastic foundation and for continuous beams without an elastic foundation”--Abstract, page ii.

A Study Of The Angular Velocity In A Liquid Induced By A Vortex In An Emptying Container, James Paul Hartman

Masters Theses

"Previously a limited amount of investigation has been done to describe the rotational motion of fluid in a draining tank. To date tank design has been based on trial and error, since the physical mechanisms of actual draining have not been recognized. This investigation has been made to develop a technique for the measurement of the motion of the fluid during the draining process and to present the results of the observed surface velocity of the liquid as a function of depth of fluid and its distance from the center of the vortex core. Many previous investigators of vortex behavior …

Non-Ferrous Metal Mining And Smelting In Australia, H. R. Hanley

Missouri School of Mines and Metallurgy Bulletins

No abstract provided.

Stress And Deflection In An Elastic Mass Under Semiellipsoidal Loads : Informational Report, John Leonard Sanborn

JTRP Technical Reports

No abstract provided.

An Investigation Of Optimum Journal Bearings., Kulin Purshotam Maskai

Masters Theses

"Not much has been done towards calculating the "Optimum Bearing" from the point of view of maximum load capacity or minimum friction. It has been found that there 1 is not much difference in the "Optimum Bearing" proportions, as calculated, considering either minimum friction or maximum load capacity

Journal bearings are commonly used and they play a very important role in reducing friction and wear. Engineers use past experience in choosing a bearing for the given conditions. A bearing design can be obtained if 'Optium Bearing' proportions are calculated as suggested by Kingsbury (1) in his article on 'Optium Conditions …

Zinc Sulfide-Sulfate Reaction Pressures, William L. Hallerberg

Masters Theses

"A static manometric method was used to find the equilibrium reaction pressure as a function of temperature for the reaction:

11 ZnSO₄ + ZnS → 4 (ZnO·2ZnSO₄) + 4 SO₂

From the reaction pressures, the standard free energy of the reaction was found to be:

ΔF⁰ = + 51,320 - 36.68 T

Using thermodynamic data for ZnSO₄, ZnS and SO₂ the standard free energy of formation of the basic salt ZnO·2ZnSO₄ was found to be:

ΔF⁰ = - 377,000 - 65.9 T cal/mole

in the temperature range 350 to 420⁰ C.

Above …

A Study Of Rotational Critical Speeds For A Multi-Mass, Multi-Span System, Pravinchandra M. Upadhyay

Masters Theses

"It is well known that the unbalanced inertia forces present in rotating shafts set up violent vibrations in a transverse direction at certain speeds known as critical speeds, whirling speeds or whipping speeds. Therefore one who deals with the design of rotating machine parts, such as turbine rotors, multi-cylinder engine crankshafts etc., must consider transverse vibrations of rotating parts.

Practical solutions for finding the critical speeds of simple rotating systems, such as a single disk on a shaft with a single span, were derived by many authors. But as the number of loads and spans increases the problem becomes complex …

Composite Beams In Building Constructions., Mahendrasinhji M. Jhala

Masters Theses

"The use of composite beams is very common in bridge and. in building construction due to the fact that a savings in material is effected.

The study herein shows a simplified procedure for design of composite beams. A number of design charts for rapid selection of a wide-flange section and the necessary cover plates are presented herein. These charts are based on economic sections of steel beams when used in a simple span, if one knows the approximate depth of the beam, slab thickness, allowable stresses in the steel and concrete and live load moment, it is very easy to …

A Study Of The Relative Electric Resistance Of Commercial Steels And Pure Iron, William Eugene Wistehuff

Masters Theses

"The change in relative electric resistance of five commercial steels, Armco Ingot Iron and Pure Iron were studied over the temperature range of 800°C to 1100°C in an attempt to correlate the phenomena of hot or red shortness with a change in the Electric resistance .

The results from the above resistance measurements were compared with mechanical tests of the same steels to show that at the point at which the iron sulfide liquid forms there is a definite change in the slope of the electric resistance vs temperature curve.

Also studied was a discontinuity in the electric resistance vs …

The Irish Plumber And Heating Contractor, October 1962 (Complete Issue)

Building Services Engineering

No abstract provided.

A Parametric Study Of The Heat Transfer Characteristics Of A Moving Band Heat Exchanger, Larry Hyde Brim

Theses and Dissertations

In recent years much attention has been devoted to the development of efficient heat exchangers. The regenerative or moving matrix heat exchanger is one type which has been considered. Most regenerative heat exchangers use one of the conventional types of high area matrices mounted in a drum or disk in such a manner that it can be moved in a continuous cycle from a cold fluid stream to a hot fluid stream and back again. A rather different approach to the design of a regenerative heat exchanger which has been patented in this country is a set of flexible moving …

Stress Analysis Of An Infinite Cylinder With An Irregular Shaped Cavity Using Complex Variable Techniques, Gerald H. Lindsey

Theses and Dissertations

The advancement of modern technology has brought with It a demand upon the engineer for more thorough analysis techniques. This has been precipitated by the advent of missiles and space-craft that do not permit regular inspections to determine causes of failure, crack propagation, design weaknesses, etc. Thus, a more complete analytical work must be performed to facilitate a foreknowledge of reaction and performance of a particular design to its environment.