Digital Commons Network^™

Squidsat: A Modular, Open-Source 3u Cubesat Bus For Low-Cost Cubesat Missions, Aaron Bournias, Joseph Dukowitz, Mark Jaber, Tyler Field, Micah Nguyen, Koowum Joshi, Noah Campos, Daphne Riordan, Ryan La Ra, Jonathan Luse, Joshua Sink, Tyler Nielsen, Ricardo Ontivaros, Michael Goryll, Joe Dubois

Small Satellite Conference

CubeSat launches continue to increase yearly, yet over 51% of missions from 2002–2016 failed. Primary faults were often due to power, mechanical, or design issues. Costs still remain high in a market driven by expensive flight-heritage hardware with proprietary designs. In order to counteract such costly practice, Sun Devil Satellite Lab (SDSL) at ASU has developed an open-source, modular 3U CubeSat bus built for low cost reliability. Unlike other bus architectures, SquidSat distributes control across independent microcontrollers linked via a CAN bus. CAN is commanded by the OBC but is capable of independent operation for fault isolation and easier testing. …

Onboard Ai At The Orbital Edge: A Mission Debrief From Stp-H7-Caspr, Evan W. Gretok, Linus Silbernagel, Diego Wildenstein, Michael J. Cannizzaro, Seth Roffe, Alan D. George

Small Satellite Conference

Goals: Enable autonomous Earth observation and onboard sensor data processing with novel compute

Motivations: Growing numbers of spacecraft demand autonomy in operation and data collection

Challenges: Harsh radiation and thermal environment of space over four-year mission lifetime

Experimental Investigation On Nanocellulose And Aluminium-Oxide Hybrid Nanofluid As A New Coolant For Radiator, D. Ramasamy, Sivaraos Sivaraos, K. Kadirgama

The Nexus of Sustainability and Energy Technology Journal

Improved efficiency leads to more compact design of the radiator. The research is conducted to prove that addition of Aluminium Oxide and nanocellulose originating from plant base with varying concentration provides a better thermal efficiency compared to usage of distilled water as radiator coolant. The objective of the research is to improve a new radiator coolant based on combination of aluminium oxide and nanocellulose with readily available coolants which is Ethylene Glycol and to investigate the erosion of nanocellulose coolant on automotive radiator. The scope of the research are the nanocellulose dispersed in base fluid which is from 60:40, (EG:W). …

Effects Of Air Injection Styles And Burner Geometry On Blowoff In Premixed Swirl Flame, Haidar Ali Janna, Zaid Aldulaimi, Mohammed Alfahham

The Nexus of Sustainability and Energy Technology Journal

Understanding the effect of air injection strategies and burner configuration on flame stability is essential for preventing blowoff in premixed swirl combustion systems. This experimental study investigates the blowoff limits of liquefied petroleum gas (LPG) flames in tangential swirl burners with two different geometries,namely two-inlet and three-inlet designs, while maintaining the same geometric swirl number and swirl strength. Two air injection strategies were examined:axial air injection which introduced through the burner base plate,and an air curtain system supplied through the inner circumference of the burners nozzle. Blowoff limits were recorded over a wide range of operating conditions to quantify the …

Implementation Of 4-Ir In Scm Of Woven Apparel Industry – A Case Study In Bangladesh For Prosperity And Sustainability, Kaniz Farhana, Nazibah Nowreen Onadee, Farhana Mabia Mim, Fuzail Ahmed Khan Rajit, Md. Fahad Faruk Pavel, S.M. Farhana Iqbal, Abu Shadate Faisal Mahamude

The Nexus of Sustainability and Energy Technology Journal

The significance of the Fourth Industrial Revolution (4-IR) for supply chain management (SCM) in the woven clothing industry is emphasized by this survey study. The implementation of cutting-edge technologies that can improve these aspects, like IoT, RFID, blockchain, big data analysis, cybersecurity, and automation, is examined from the viewpoints of woven clothing manufacturers. This investigation seeks to determine Bangladesh's key technological barriers as well as the primary motivator for the weaving RMG's adoption of cutting-edge technologies. Here, a combination of methods, including fieldwork and data collection, has been performed for thorough analysis. The research outlines the current state of affairs …

Evaluation Of Graphene Cathode And Aluminum Ion Ev Battery Performance: A State-Of-The-Art Analysis For Future, Abu Shadate Faisal Mahamude, Kaniz Farhana

The Nexus of Sustainability and Energy Technology Journal

Lithium-ion batteries may eventually be replaced with rechargeable aluminum-ion batteries (AIBs) due to their high energy density, increased safety, and plentiful supply of raw materials. The development of appropriate cathode materials for AIBs is a major priority these days. As a result of their better quality, graphene-based cathodes have a great chance of success. Graphene is a relatively new and promising material with a unique set of chemical and physical characteristics. Graphene's high electron conductivity and large specific surface area make it seem like one of the best electron-conducting additions, but there are several other ways to increase the cathode …

Atomistic Insights Into The Interfacial Properties And Thermal Transport Of Mxene–Copper Nanocomposites: A Molecular Dynamics Study, Navid Aslfattahi, Maryam Sadat Kiai, K. Kadirgama, L. Samylingam, Chee Kuang Kok, Mohd A.F. Rosli, Thong Leng Lim

The Nexus of Sustainability and Energy Technology Journal

Understanding the interfacial heat transport mechanisms in Ti₃C₂T_x–copper nanocomposites is essential for developing advanced Thermal Interface Materials (TIM) for electronic and energy systems. This study provides atomistic insights into how MXene surface terminations (–O, –OH, –F), copper crystallographic orientations ((111), (100), (110)), and MXene layer thickness influence thermal conductivity and interfacial thermal resistance. O-terminated MXene exhibited the strongest interfacial adhesion (∼0.45 J/m²) and the highest thermal conductivity (∼68 W/m· K), while F-terminated MXene showed the weakest interfacial bonding and poorest heat transfer (∼45 W/m· K). Increasing the MXene thickness introduced additional phonon …

Ensuring Safety In Battery Management Systems: A Control Barrier Function Approach, Magdalena Kossek

Electronic Theses and Dissertations

Safe and efficient operation of batteries is paramount to extending their lifespan and ensuring reliability in battery management systems. This work presents a new approach for maximizing safety and performance of lithium-ion batteries in a variety of applications with a view towards efficiency in computation. The aim is to maximize a battery’s output (its power, speed of charging, and overall efficiency) while preserving its longevity and ensuring operational safety. This challenge is tackled by developing a novel control algorithm for advanced lithium-ion battery management leveraging control barrier functions (CBFs) to ensure safe and efficient operation during fast charging and discharging. …

Field-Like- And Self-Spin-Orbit Torques In Magnetic Multilayer Films, Kyle Jeffrey Peterson

Electronic Theses and Dissertations

Spin-orbit torques (SOTs) have been realized as an energy efficient mechanism to manipulate and drive magnetization dynamics in magnetic multilayer films. Their damping-like and field-like components provide distinct pathways for controlling the magnetization, enabling switching, sustaining magneto-oscillations, and driving domain-wall motion with potential applications in nonvolatile memory, spin-based logic, and microwave signal generation. However, the accurate quantification and interpretation of these torques remains complicated by experimental sensitivity, the co-symmetry of the Oersted field and the effective field due to the field-like torque, and assumptions regarding the material layers from which the torques originate. The body of work set forth in …

An Investigation Of Pelvic Kinematics And Implications For Total Hip Arthroplasty, Kathryn Holland Colone

Electronic Theses and Dissertations

Total hip arthroplasty (THA) is one of the most commonly performed orthopaedic procedures, with approximately 500,000 surgeries performed annually in the United States alone. Although THA is widely regarded as highly successful, postoperative complications persist, highlighting the multifactorial nature of THA outcomes. Previous studies have demonstrated the importance of implant positioning and soft tissue mechanics, yet challenges remain in optimizing surgical decisions on a patient-specific basis. Recent advances in surgical planning tools have shifted the focus of preoperative planning toward optimizing patient-specific outcomes, highlighting the need to better understand how patient anatomy, surgical technique, and joint mechanics interact to influence …

Synergistic Reinforcement Of Lignin–Chitosan Hydrogels Using Vanillin As A Sustainable Green Crosslinker, Moses Ayitey-Adjin Jr., Mohammad Jahid Hasan, Jeremy Erb, Kishore Chand, Garry S. Crosson, Kenya Crosson, Esteban Ureña-Benavides, Erick Salvador Vasquez-Guardado

Chemical and Materials Engineering Faculty Publications

While bio-based hydrogels derived from lignin and chitosan are promising sustainable adsorbents, their practical application is hindered by poor mechanical stability. This study addresses this limitation by synthesizing lignin-chitosan hydrogels using vanillin as a green, bio-derived crosslinker via a facile solution-casting method. The formation of imine (Schiff base) linkages between the aldehyde groups of vanillin and the primary amines of chitosan was confirmed by FTIR spectroscopy (C = N stretching at ~ 1602 cm^− 1). SEM and TGA results demonstrated a reduction in the pore size of the crosslinked hydrogel and an enhanced residual thermal mass. Rheological and …

Techno-Economic Analysis Of Implementing Carbon Capture And Storage (Ccs) At The Punagaya 2×100 Mw Coal Power Plant, Ricky Andreas Kristianto Siringoringo, Rahma Muthia, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The increase in greenhouse gases due to the combustion of fossil fuels is one of the major drivers of global warming and consequently drives the development of low-carbon technologies such as Carbon Capture and Storage (CCS). The aim of this study is to evaluate the technical and economical feasibility of the implementation of CCS technology in the Punagaya Subcritical Coal-Fired Power Plant (CFPP) 2×100 MW as a part of the energy transition strategy towards Net Zero Emissions (NZE) 2060. The simulation was carried out using Aspen HYSYS software, including coal combustion, CO₂ capture through MDEA-PZ solvent, dehydration, transportation, and storage …

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Techno-Economic Analysis Of The Utilization Of Waste-To-Energy In Jakarta Industrial Estate Pulogadung, Wahyu Punjung Pesonagrata, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

Indonesia has a serious waste problem, which ranking second in marine pollution. Due to significant environmental impacts, a solution to overcome the complexity of waste problems is needed. This study took sample on waste management in Jakarta Industrial Estate Pulogadung (JIEP). JIEP is an Industrial area which covers 443 hectares of land in East Jakarta. This study aims to address Indonesia's serious waste problem by exploring the potential utilization of waste in the Jakarta Industrial Estate Pulogadung (JIEP) as Refuse-Derived Fuel (RDF) for a waste-to-energy (WtE) power plant. The proposed method used a steam power plant with RDF as fuel …

Analysis Of Tower Stringset Replacement From 33 Kv To 66 Kv Considering Sagging Clearance, Muhammad Lazuardi Azzura, Anne Zulfia Syahrial, Julius Purnama Eka Kartika

Journal of Materials Exploration and Findings

Efforts to increase the capacity of transmission networks are often undertaken by uprating the operating voltage of existing lines rather than building entirely new infrastructure. Such uprating typically involves the replacement of tower insulator stringsets to withstand higher voltages, while also ensuring that mechanical performance remains adequate. This paper presents an analysis of uprating the Parakan–Sunyaragi transmission line from 33 kV to 66 kV, with particular emphasis on conductor sagging and the resulting clearance from the ground. The methodology employed includes calculations based on catenary equations, analysis of conductor tensile forces, and a comparative evaluation of two widely used insulator …

A Basic Review Of Design And Material Selection For Shovel’S Body, Anggi Buana, Winarto Winarto

Journal of Materials Exploration and Findings

Manual shovels still play an important role in construction and agricultural work, selecting the right material is crucial to obtain a shovel body that has structural reliability, ergonomic efficiency, and sustainability. In this study, a method for selecting the most suitable material will be discussed by combining functional analysis (Ashby's material performance index, and the Multi-Criteria Decision Making approach). From the figure of load, material index is formulated as a reference for performance property requirements. Using data from analysis software and qualitative data, eight performance criteria such as durability, corrosion resistance, cost, and environmental impact are then weighted using the …

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

Theoretical Analysis And Promotion Path Of Coordinated Digital-Intelligent And Green Transformation In Manufacturing Industry, Chaokai Xue, Xiaohui Qu, Laijun Wang, Yifan Yang

Bulletin of Chinese Academy of Sciences (Chinese Version)

The coordinated digital-intelligent and green transformation in the manufacturing industry serves as a key lever for accelerating the sector’s progress towards intelligence, greenization, and integration. This study defines the connotation and key characteristics of the coordinated digital-intelligent and green transformation, constructs a theoretical analysis framework, identifies its current status and challenges, and proposes a promotion pathway based on above work. Drawing upon theories from digital economics, environmental economics, and industrial economics, this study develops an analytical framework characterized by scenario-driven dynamics, technology-enabled transformation, organizational collaboration, and environmental support. It further proposes actionable pathways, including enhancing scenario supply capacity, accelerating the …

Field Research And Policy Recommendations On Coordinated Digital-Intelligent And Green Transformation Of China’S Traditional Manufacturing Industry—Evidence From Key Traditional Manufacturing Industries In Shandong Province, Dingding Xiao, Peng Hui, Shaoni Liu, Xinxin Du, Laijun Wang, Guilong Zhu, Wenbo Guo

Bulletin of Chinese Academy of Sciences (Chinese Version)

The coordinated digital-intelligent and green transformation of traditional manufacturing is an important pathway for upgrading traditional industries and accelerating the development of a modern industrial system. Based on field research involving more than 20 representative enterprises in Shandong Province across automobile manufacturing, coal processing, textiles, and petrochemicals, this study systematically examines the practical progress, typical models, major constraints, and policy needs associated with this transformation. The findings show that China’s traditional manufacturing sector is shifting from isolated upgrading to system integration, from production-focused transformation to full life-cycle coordination, and from individual-enterprise initiatives to industrial-chain collaboration. Nevertheless, it still faces insufficient …

Percolation-Induced Thermo-Rheological Transitions In Biobased Graphene Nanoplatelet Nanofluids, Abiodun A. Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Biobased lubricants with thermally responsive rheology are increasingly needed for high-efficiency mechanical systems. Graphene nanoplatelet (GnP) nanofluids in vegetable oils are promising candidates, yet their percolation-driven thermo-rheological transitions remain insufficiently understood. In particular, the coupled concentration–temperature landscape controlling network-mediated flow transitions has not previously been established. Here, surfactant-free GnP nanofluids were prepared in high-oleic soybean oil (HOSO) at concentrations of 0.025–2.15% v/v (ϕ), and their rheological response was mapped between 25°C and 80 °C under steady-shear and oscillatory conditions. Below the percolation threshold (ɸ ≤ 0.1% v/v), the nanofluids exhibit near-Newtonian behavior, moderate reversible viscosity enhancement, and classical Arrhenius-type temperature …

Flexible Power Point Tracking For Active Frequency Regulation In Grid-Connected Photovoltaic Power Plants, Castor K. Haule, Sophia D. Kigodi, Emmanuel S. Matee, Francis Mwasilu

Tanzania Journal of Science

The increasing penetration of photovoltaic (PV) systems into modern power grids necessitates advanced control strategies capable of supporting grid stability. Traditional PV systems rely on Maximum Power Point Tracking (MPPT) to maximize energy extraction, limiting their ability to participate in grid-support functions such as frequency regulation or power curtailment. This paper presents a flexible power point tracking (FPPT) control strategy that enables PV systems to operate at arbitrary points along the power–voltage (P–V) curve. A multi-mode power management scheme is proposed, integrating conventional Perturb and Observe (P&O) MPPT with FPPT, allowing the system to switch dynamically between energy maximization and …

Optimization Of Gas Consumption, Cost And Production Rate For Computerized Numerical Control Oxy-Acetylene Flame Cutters, Eustace K. William, Simon I. Marandu, Enock W. Nshama

Tanzania Journal of Science

This study examined the impact of flame cutting parameters (i.e., cutting speed, plate thickness and nozzle diameter) on oxy-acetylene gas consumption, cost and production rate. A full factorial design of experiments was used to generate 27 experiments, which were conducted using a CNC flame cutter. The analysis of variance (ANOVA) method was used to determine significant process parameters, followed by regression analysis using the MINITAB ® software. The technique for order preference by similarity to ideal solutions (TOPSIS) was used to determine the optimal cutting parameters for minimizing the consumption and cost estimation of oxy- acetylene gas and maximizing the …

Mitigation Of Power Quality Problems In Songwe Power Distribution Line Using A Static Distribution Compensator, James Mhame, Emmanuel Matee, Francis Mwasilu, Sophia D. Kigodi

Tanzania Journal of Science

The Songwe electrical distribution system is prone to severe voltage drops that lead to frequent power outages in long feeders, light flickering, and the multi-operation of equipment and other appliances. The voltage at the switching station averaged 27.6 kV, 28.21 kV, and 25.79 kV in the years 2023, 2022, and 2021, respectively. Additionally, the maximum was 32.2 kV, below the nominal voltage, and the feeder has a very low power factor, which drops to 0.6 during peak hours. Currently, TANESCO uses automatic voltage regulators connected to a distant location from the switching station to two feeders with critical voltage drop …

Navigating The Challenges: Preflight Planning With Notam In Australia’S General Aviation Sector, Joshua Chiang, Guido Carim Junior

Journal of Aviation/Aerospace Education & Research

Notices to Airmen (NOTAMs) are an integral part of a pilot’s preflight navigational briefing, providing pertinent information in textual format. However, significant shortcomings have been found in the NOTAM system and in its use, with many of the shortcomings revolving around the interface. This study aimed to identify and evaluate the challenges general aviation pilots face when interacting with NOTAMs during preflight navigational planning. A thematic analysis study was conducted and included episodic semi-structured interviews with 15 pilots and document analysis. The interview transcription and excerpts of NOTAMs were analyzed following a thematic analysis technique. The findings of this preliminary …

Impact Of In-Cabin Human Machine Interface Designs On Passenger Trust In Urban Air Mobility, Ricole A. Johnson, Erika E. Gallegos

Journal of Aviation/Aerospace Education & Research

Urban Air Mobility (UAM) presents a promising solution for alleviating urban traffic congestion and enhancing transportation efficiency. However, the widespread acceptance of UAM, particularly sustained ridership of autonomous passenger air vehicles (PAVs), is contingent upon addressing critical human factors for building passenger trust, especially in the absence of a human pilot. This paper evaluates how different in-cabin human-machine interface (HMI) designs affect passenger trust in the aircraft and in-cabin display, situation awareness, and pilot preferences. Forty participants, equally split between early and late technology adopters, completed two simulated flights: a baseline flight with no HMI and a second flight featuring …

Instructional Fidelity In Virtual Flight: Applying A Structured Learning Model For Vr-Based Pilot Training, Lindsay Gouedy, Bryce Jarrell, Mary Fendley, Brandon Wolf

Journal of Aviation/Aerospace Education & Research

As immersive training technologies reshape the future of aviation education, this study explores the impact of integrating Virtual Reality (VR) into a structured instructional model for B-52 pilot training. With the development and implementation of the I-BUFF (Integrated B-52 Unit Flight Familiarization) model, an innovative framework built upon the 4C/ID (Four Component Instructional Design) and SEEV (Salience, Effort, Expectancy, Value) models, this research evaluates whether structured VR environments improve training transfer and accelerate task proficiency for in-air refueling tasks. A sample of 233 pilot trainees was assessed across three groups: traditional training (non-VR unstructured), VR semi-structured, and VR fully structured …

The Role Of User Experience In Virtual Reality Flight Training: A Comparison With Pc-Based Simulation, Tianxin Zhang, Christina M. Frederick, Barbara Chaparro

Journal of Aviation/Aerospace Education & Research

The current project explores how user experience (UX) in virtual reality (VR) flight simulation influences both cognitive learning outcomes and procedural skill acquisition when compared to traditional desktop-based simulation.. Using a quasi-transfer of training design, 48 student pilots were randomly assigned to VR, Desktop, or Control groups and trained on the Chandelle maneuver. UX was measured with the User Experience Questionnaire (UEQ), while training effectiveness was evaluated through a post-training knowledge test and recorded maneuver performance on a high-fidelity flight training device. Results indicated that the VR group reported significantly higher UX scores in Attractiveness, Stimulation, and Novelty, and showed …

Utilising Video Recordings To Assess Student Pilot Performance: An Exploratory Study During A Simulated Training Flight, Bradley Moncion, Shi Cao, Allison Lynch, Suzanne K. Kearns, Elizabeth Irving, Ewa Niechwiej-Szwedo

Journal of Aviation/Aerospace Education & Research

In ab initio flight training, the quality of the feedback a flight instructor provides their student is essential to their success. While other high-performance and safety-critical industries have incorporated the use of video recordings into training and assessments, the aviation industry generally has not. There are some studies addressing the potential benefits of video recordings in training professional pilots, but there is a lack of research at the ab initio level. In this study, five flight instructors assessed the performance of student pilots conducting a simulated training flight using a 4-point marking scale. The flights instructors were then tasked with …

Evaluation Of Tactile Cueing Embedded In An Aviation Headset On Pilot Altitude Control, Nicholas D. Wilson, Jessica Van Bree, Matthew Cleveland, Sunny Charakuru, Thomas Petros, Richard Ferraro, Kouhyar Tavakolian

Journal of Aviation/Aerospace Education & Research

This study evaluated the effectiveness of tactile cueing integrated into a pilot’s headset on pilot altitude control during simulated instrument conditions. Pilots typically rely on visual and auditory inputs to maintain situational awareness, but in high-workload or instrument meteorological conditions (IMC), these channels can become overloaded. One underutilized alternative for alerting is a tactile cueing apparatus. Using an X-Plane simulation of a Piper Archer equipped with a G-1000 avionics suite, 39 FAA-certified pilots flew two precision approaches. The experimental group (n = 20) received haptic cues via ear seal-embedded tactors when deviating from assigned altitude or glideslope. The control group …