Digital Commons Network^™

Keratin-Based Film: Waste To Bioplastic, Emma Bond

University Honors College

The solution to plastic lies in alternative materials, like bioplastics. One such possibility is keratin-based films. They are made from sources that are already deemed to be waste and that all regions of the world are abundant in. Manufacturing values a one-size-fits-all solution and keratin being plentiful worldwide fulfills that set standard. The films’ properties, which are important to the basic needs of a package, vary with different additives and the type of keratin used. α-keratin and β-keratin have different strengths and are found in nature in different sources. The resource focused on was chicken feathers, which produce more β-keratin …

Building Services Engineering May/June 2024

Building Services Engineering

No abstract provided.

Investigating Autonomous Ground Vehicles For Weed Elimination, Abraham Mitchell

Computer Science and Computer Engineering Undergraduate Honors Theses

The management of weeds in crop fields is a continuous agricultural problem. The use of herbicides is the most common solution, but herbicidal resistance decreases effectiveness, and the use of herbicides has been found to have severe adverse effects on human health and the environment. The use of autonomous drone systems for weed elimination is an emerging solution, but challenges in GPS-based localization and navigation can impact the effectiveness of these systems. The goal of this thesis is to evaluate techniques for minimizing localization errors of drones as they attempt to eliminate weeds. A simulation environment was created to model …

Mems Optical Cavities For Low Power Communication., Jacob Schopp

Electronic Theses and Dissertations

This thesis discusses the use of MEMS (microelectromechanical systems) optical cavities for use in low power communication. MEMS optical cavities are thin air gaps between an actuated MEMS mirror and a fixed glass encapsulation. By moving the MEMS mirror the reflectivity of the MEMS optical cavity can be changed. This change in reflectivity can be used to transmit information passively by modulating reflected light intensity instead of generating new light using a light source. These MEMS optical cavities are demonstrated using optical fibers for illumination delivery and reflected light collection. In addition to being reflected for communication, the illuminating light …

Environment And Response Of 3d-Encapsulated Mesenchymal Stem Cells To Mechanical Loading, Augustus Greenwood

McKelvey School of Engineering Graduate Student Theses & Dissertations

This thesis explores the micromechanical environment induced when cyclically compressing hydrogels via finite element modeling and experimentally on the impact of loading on mesenchymal stem cells (MSCs) when encapsulated withing 3D hydrogel matrices. Degenerative joint diseases, characterized by cartilage degradation, present significant challenges due to cartilage's limited self-repair capacity. Innovative approaches, including stem cell-based therapies and engineered biomaterials, have emerged as promising strategies for cartilage repair and regeneration. This work specifically investigates the calibration of a bioreactor, the uniformity of load response across the hydrogel constructs via finite element modeling (FEM), and the stress response of MSCs subjected to various …

Remote Detection Of Leaks In High Level Waste Storage Tanks, Hunter Frey

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this research was to characterize three devices potentially capable of remotely detecting signatures of a leak from high-level waste (HLW) storage tanks, specifically ones found at the Savannah River Site and the Hanford Site. The hazard HLW found within these tanks include ¹³⁷Cs, a gamma-ray emitter, and ⁹⁰Sr, an electron emitter leading to heat generation. These pose health risks to the personnel and maintenance problems and environmental safety issues if released to the environment. Additionally, pinpointing the location of a leak is a task that could lead to the mitigation of excess waste leaking from …

A Computational Framework For Predicting Cell-Specific Nucleo-Cytoskeletal Forces, Madison Leigh Goldfeldt

Boise State University Theses and Dissertations

Understanding the influence of mechanical forces on cell function and fate is crucial in unraveling the intricate mechanisms that govern cellular behavior. The cytoskeleton, a dynamic network of protein filaments, plays a pivotal role in sensing and transmitting mechanical cues within cells. The nucleus relies on cytoskeletal mechanical input through nuclear envelope adaptor proteins to sense external stimuli and respond by regulating intra-nuclear chromatin organization. This research provides a means for examining the interplay between mechanical forces and the cytoskeleton in regulating various cellular processes, including cell adhesion, migration, division, and differentiation. Through studying and simulating the cellular response to …

Development And Characterization Of A Low Intensity Vibrational System For Microgravity Studies, Omor Khan

Boise State University Theses and Dissertations

The advent of extended-duration human spaceflight demands a better comprehension of the physiological impacts of microgravity. One primary concern is the adverse impact on the musculoskeletal system, including muscle atrophy and bone density reduction. Ground-based microgravity simulations have provided insights, with vibrational bioreactors emerging as potential mitigators of these negative effects. Despite the potential they have, the adaptation of vibrational bioreactors for space remains unfulfilled, resulting in a significant gap in microgravity research. This paper introduces the first automated low-intensity vibrational (LIV) bioreactor designed specifically for the International Space Station (ISS) environment. Our research covers the bioreactor's design and characterization, …

Comparison Of Properties And Fracture Patterns In Aged And Fresh Cortical Bone, Mckenna Roan

Boise State University Theses and Dissertations

Bone is a complex natural material that presents many challenges to researchers interested in characterizing its mechanical properties. There are different techniques, such as drying, embalming, and freezing, to preserve bones for engineering and scientific study. There are advantages and disadvantages to these techniques, and there have been limited studies comparing the effect of preservation techniques on the mechanical and fracture properties. In this research, aged and fresh bovine bone specimens are tested in compression while monitoring acoustic emissions (AE). Three main aspects of testing are investigated: the force-displacement curves, acoustic emission activity, and fracture patterns observed in X-ray computed …

Thermal-Fluid And Optical Considerations In The Design Of Porous Cavity Receivers, Koda D. Boldt

Boise State University Theses and Dissertations

Concentrated solar power (CSP) is a versatile renewable energy source that cleanly provides thermal energy by means of concentrating solar irradiance. One form of CSP, central receiver systems (CRS), utilizes receivers that allow for a solid medium to act as a heat exchanger between the solar irradiance and an optically clear working fluid. This solid medium can take many forms. One such form that shows great potential in high temperature applications is a porous receiver made of a ceramic material. The porous media is subject to solar irradiance to heat its surface. Air is then pulled across the porous media …

On-Chip Active Pulse-Clamp Stimulation (Apcs) For Rapid Recovery, Charge-Balanced Neural Stimulation, F. N. U. Tala

Boise State University Theses and Dissertations

Neurostimulations are widely utilized to modulate brains and nervous systems functions for therapeutic purposes. Traditional neurostimulation involves applying a direct current delivered to the excitable tissues to elicit neural response. There is a growing demand for a robust, rapid stimulation system that ensures chronic safety through charge balancing in vivo. This dissertation is a compilation of previously published works, detailing various board-level stimulators, an innovative on-chip stimulation technique, and a distributed modelling method.

Chapter one introduces MEDUSA, a cost-effective, multi-functional neurostimulation system capable of achieving multi-channel, arbitrary stimulation for neuroscience research.

Chapter two delves into a scripted distributed model framework …

Evaluating The Synergy Of Geocell And Microbial-Induced Calcite Precipitation (Micp) In Enhancing Pavement Base Stability: A Field Study On Us 95, Mabin Dahal

Boise State University Theses and Dissertations

The imperative to develop resilient and sustainable infrastructure is escalating, particularly as urban road networks are subjected to unprecedented stresses. Conventional pavement bases often entail the extensive utilization of quarry materials, which significantly exacerbates environmental degradation and amplifies the energy footprint of construction endeavors. The extraction, transportation, and processing of these quarry materials contribute to deforestation, habitat eradication, and greenhouse gas emissions. Given these environmental and operational hurdles, the quest for innovative, sustainable alternatives in pavement engineering is pressing. One solution is to use the native materials treated with microbial-induced calcite precipitation (MICP) alongside geocell technology back in pavement construction …

Manufacturing, Characterization, And Macromechanical Modeling Of Short Flax/Hemp Fiber-Hybrid Reinforced Polypropylene, Bilel Miled, Slim Kammoun, Imane Belyamani, Laurent Cauret

All Works

The present work focuses on the manufacturing, mechanical characterization, and modeling of hybrid Flax/Hemp/Polypropylene (PP) composites under dry conditions. Geometric parameters of the fibers were measured both before and after the melt processing. The results indicated that the processed fibers, especially the hybrid ones, had a narrowed length distribution with an average fiber length of 0.48 mm for hybrids compared to 0.62 mm for non-hybrids. The hybrid composites were mechanically characterized using basic and loading-unloading tensile tests with various fiber combinations and weight percentages. The study also examined the effect of strain rate and cutting angle on the behaviors of …

Utilizing Spatial Transcriptomics To Compare Gene Expression In Volumetric Muscle Loss Injury Recovery, Colton Gattis

Biomedical Engineering Undergraduate Honors Theses

Volumetric Muscle Loss (VML) injuries are known to disrupt the normal regenerative process via fibrosis leading to an extensive permanent loss of muscle function. The specific causation of this disruption remains to be defined; however, with new developments in transcriptomics, genetic trends can be identified across regions of tissue over time. This study follows VML injuries within the tibialis anterior of a mouse model for fifteen days after initial injury to attempt to identify expected transitions in healing. Genetic presence began to become more diversified as recovery progressed from four to fifteen days post injury with spatial clusters becoming globalized …

4-Channel Spatially Multiplexed Communication System In Single-Core Optical Fibers, Ce Su

Theses and Dissertations

This dissertation delves into exploring and advancing spatial domain / space division multiplexing (SDM) technologies within single-core optical fibers, a frontier in optical fiber communications poised to meet the burgeoning global demand for data transmission. At the heart of this research is the pursuit to significantly enhance the capacity and efficiency of optical fiber communication systems without necessitating additional fiber infrastructure. This work unveils a new paradigm in optical fiber communications characterized by a pioneering 4-channel SDM system through a meticulous process encompassing theoretical modeling, computational simulations, design innovations, and rigorous experimental validations. Theoretical contributions include the development of refined …

Development Of A More Sustainable High And Ultra-High-Performance Concrete, Enrique Chirino Andalco

Theses and Dissertations

The urgent need to address climate change and environmental damage presents humanity with significant challenges that must be tackled quickly, not acting promptly will result in irreversible consequences, such as extreme weather events, public health risks, and water shortages, among other impacts.

Due to its enormous size and variety of uses, the construction industry is a key factor in addressing the climate challenge. Specifically, concrete as the most used construction material in the world is a good target for developing innovative and Sustainable improvements to reduce environmental impacts.

Using by-products from other industries in concrete manufacturing is a common and …

Machine Learning Predictive Models For Load Identification Of Railroad Bridges Subjected To Train-Induced Vibration, Md Masnun Rahman

Theses and Dissertations

The U.S. rail network is among the world's largest, safest, and most efficient. However, many its railway bridges, which play an essential role in its connectivity, are over 100 years old, showing signs of structural deterioration exceeding their practical service life. The increased weight and speed of modern trains also pose a risk to these bridges. Traditional load identification and monitoring technologies like Weigh-in-Motion (WIM) systems are rarely used on railway bridges due to their cost and practical limits. This thesis explores a cost-effective approach to utilize vibration sensors on railway bridges to identify and predict train load features (speed …

Broadening The Application Range Of Cell-Free Protein Expression Systems, Matthew Becker

All Theses

Centralized protein manufacturing platforms make the delivery of needed therapies to places with limited infrastructure almost impossible. Cell-free protein expression systems, systems that utilize protein production machinery extracted from cells, offer these communities a viable protein expression platform that is robust and easily deliverable to the place of need. Much work in cell-free system engineering looks to increase the hardiness of cell-free system (CFS) components, like the extract and reaction buffer, needed to carry transcription and translation of gene therapeutic targets forward. Freeze- and air-drying of extract, reaction buffer, or both with certain additives, like sugar molecules, has been proposed …

Hand Movement Analysis For Surgical Suturing Skill Assessment, Amir Mehdi Shayan

All Theses

To enhance patient safety, surgical education is increasingly incorporating simulation for formative skills assessment and training. However, many standardized assessment tools rely on human raters for performance assessment, which is resource-intensive and subjective. Simulators that provide automated and objective metrics from sensor data can address this limitation. This thesis presents an instrumented bench suturing simulator, patterned after the Clock Face (CF) radial suturing model from the Fundamentals of Vascular Surgery (FVS), for automated and objective assessment of open suturing skills by particularly focusing on biomechanical analysis of hand movements. For this research, 97 participants (35 attending surgeons and fellows, 32 …

Evaluating Company Culture Of Roofing Contracting Companies To Attract And Retain Women In The Industry, Gopika Viswanathan

All Theses

The US construction industry, similar to many other industries, has a low representation of women. This difference is even more pronounced in construction trades, such as the roofing industry. The admission of more women into the industry is important to address workforce shortage issues that the industry is facing. Company culture has been cited as one of the primary reasons why women choose not to enter the industry or face barriers during their careers. The main objective of this study was to evaluate the company culture of roofing companies through factors identified by literature and by women and companies in …

Cost-Risk Analysis Of The Ercot Region Using Modern Portfolio Theory, Megan Sickinger

Master's Theses

In this work, we study the use of modern portfolio theory in a cost-risk analysis of the Electric Reliability Council of Texas (ERCOT). Based upon the risk-return concepts of modern portfolio theory, we develop an n-asset minimization problem to create a risk-cost frontier of portfolios of technologies within the ERCOT electricity region. The levelized cost of electricity for each technology in the region is a step in evaluating the expected cost of the portfolio, and the historical data of cost factors estimate the variance of cost for each technology. In addition, there are several constraints in our minimization problem to …

Titanium Dioxide Nanomaterial Ink Production Through Laser Ablation Synthesis In Solution For Printed Electronics Applications, Devyn Duryea, Nicholas Mckibben, Jacob Manzi, Taylor Brennan, Harish Subbaraman, David Estrada, Nirmala Kandadai

Electrical and Computer Engineering Faculty Publications and Presentations

Flexible and printed electronics have become increasingly popular as they make possible the production of flexible, low-cost, multifunction devices that are unachievable through traditional manufacturing methods. The printed films are significantly impacted and thus limited by the existing ink production process. Herein, an alternate technique of generating high-quality titanium dioxide (TiO₂) nanoparticle ink compatible with aerosol jet printing using laser ablation synthesis in solution (LASiS) is showcased. Dynamic light scattering data and transmission electron microscopy confirm the particle size distribution. UV–vis measurements are performed, and the Beer–Lambert relationship is used to determine the concentration of the generated ink. …

On-Demand Fabrication Of Piezoelectric Sensors For In-Space Structural Health Monitoring, Amanda White, Isaac Little, Anastasiya Artyuk, Nicholas Mckibben, Fereshteh Rajabi Kouchi, Claire Chen, David Estrada, Zhangxian Deng

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Inflatable structures, promising for future deep space exploration missions, are vulnerable to damage from micrometeoroid and orbital debris impacts. Polyvinylidene fluoride-trifluoroethylene (PVDF-trFE) is a flexible, biocompatible, and chemical-resistant material capable of detecting impact forces due to its piezoelectric properties. This study used a state-of-the-art material extrusion system that has been validated for in-space manufacturing, to facilitate fast-prototyping of consistent and uniform PVDF-trFE films. By systematically investigating ink synthesis, printer settings, and post-processing conditions, this research established a comprehensive understanding of the process-structure-property relationship of printed PVDF-trFE. Consequently, this study consistently achieved the printing of PVDF-trFE films with a thickness of …

Principles And Practices For Creating Inherently Resilient Smallsats Despite Constrained Resources, Lee Jasper, Tyler De Caussin

Space Dynamics Laboratory Publications

Over the past few years, small satellites have become heavily utilized for both constellations and single vehicle missions. Many organizations have learned how to be successful with these platforms however, while small, they are not simple systems and first-time creators of these systems still suffer high rates of failure. AFRL's Small Satellite Portfolio has established guiding practices/principles for satellite design that help reduce overall mission risk based upon both community and internal lessons learned. These principles help make the design technically resilient and can also help with programmatic execution. This paper will discuss the principles with some detail (such as …

Amazon Fba Vs Fbm; A Strategic Approach To Determine Which Method Can Effectively Utilize Project Management Principles To Enhance Your Success As A New Amazon Seller., Tiffany Renee White

Theses and Dissertations

Navigating the complexities of a platform such as Amazon demands a strategic approach guided by project management principles. A comparative analysis of Fulfillment by Amazon (FBA) and Fulfillment by Merchant (FBM) methods were completed by focusing on how project management principles optimize product acquisition, supply chain management, and shipping methods for Amazon sellers. The objectives of this study included the identification of top product acquisition tools, the evaluation of inventory management software, assessing shipping methods, and determining the most effective fulfillment process for Amazon seller success. A mixed-methods approach was applied, involving an Amazon seller survey, literature review, data analysis, …

Denoising Diffusion Probabilistic Models Based Accelerated Mri, Alexander Francis Bugielski

Theses and Dissertations

Magnetic Resonance Imaging (MRI) is a cornerstone in obtaining intricate visualizations of anatomy and physiological processes within the human body. However, its extensive scan duration not only causes patient discomfort but also increases the likelihood of motion-induced artifacts in the images. To address such a challenge, this study investigates deep neural network models for reconstructing high-resolution MRI images from noisy and significantly undersampled data in a supervised learning manner. Specifically, it compares three models: a conventional U-Net, a self-attentive U-Net, and an innovative probabilistic diffusion model that builds upon the self-attentive U-Net architecture. These models are evaluated on their ability …

Biophysical Model Of Retraction Motor Neurons And Their Modification By Operant Conditioning, Maria Rasheed

Dissertations and Theses (Open Access)

Operant conditioning (OC) is a form of associative learning in which an animal modifies its behavior based on the consequences that follow that behavior. Despite its ubiquity, the underlying mechanisms of OC are poorly understood. Insights into the mechanisms of OC can be obtained by studying Aplysia feeding behavior as it can be modified by OC. This behavior is mediated by a central pattern generator (CPG) network in the buccal ganglia that contains a relatively small number of neurons. This CPG generates rhythmic motor patterns (BMPs) that move food into the gut by closing a tongue-like structure (i.e., radula) during …

Locally Injectable Peptide Hydrogel For Conversion Of Temozolomide And Codelivery Of Sirna In Glioblastoma Multiforme Treatment, Megan Pitz

All Dissertations

Traditional treatment methods for glioblastoma multiforme (GBM) are largely unsuccessful, with a 5-year survival rate of 5.6%. Temozolomide (TMZ), the only chemotherapy FDA-approved for GBM treatment, is a hydrophobic prodrug that is stable in an acidic pH and begins converting to its active form at a physiological pH of 7.4. However, complete conversion of TMZ is observed only at a higher pH, and only about 30% of administered TMZ reaches the central nervous system. Therefore, there is a need for new treatment methods that maximize TMZ delivery to and efficacy at the tumor site. Self-assembling peptides are a unique class …

Toxicokinetics And Toxicodynamics Of Radium-226 In An Estuarine Sentinel Species Geukensia Demissa, Sarah Donaher

All Dissertations

The historical use of radioluminescent objects, most notably those containing radium-226 (²²⁶Ra)-based paint, has contributed to contemporary environmental contamination of radioactive material, often near naval installations or other military-associated coastal sites. The risk to both human and environmental health from this small-scale, discrete radioactive material is challenging to predict due to large uncertainties in the source terms, bioavailability, and toxicity of these objects. The objective of this study was to provide information on the accumulation and toxicity of acute ²²⁶Ra exposure in a sentinel species to improve risk assessments for small-scale, coastal radiological contamination. The sentinel species …

Multi-Scale Modeling Of Selective Laser Sintering: From Manufacturing Process And Microstructure To Mechanical Performance In Semi-Crystalline Thermoplastics, Cameron Zadeh

All Dissertations

Selective laser sintering is an additive manufacturing process that opens many design possibilities but is limited in its reliability and reproducibility. Numerical simulations validated by experimental data yield insights into the process and resulting part properties, allowing users to make more informed decisions. In this dissertation, a model for the process and microstructure is developed and validated, followed by a coupling to mechanical models to predict part performance. Further developments include a new addition of a reaction kinetics model to the process model to describe the interplay between thermal degradation and melt pool properties, and an exploration of the parameter …