Digital Commons Network^™

Laboratory Evaluation Of Dynamic Characterization Methods For Rapid Condition Assessment Of Bridges, Jason Kyle Herrman

Graduate Theses and Dissertations

The objective of this thesis was to devise and refine Structural Health Monitoring methods and the associated quantitative characterization methods with the specific goal of enabling rapid and reliable safety evaluations of bridges following natural or manmade hazards. Presently, the safety and serviceability of these transportation infrastructure assets for use in emergency response and recovery operations are evaluated through on-site visual inspections of individual structures by teams of specially trained engineers or technicians; a process that is manpower-intensive, subjective, and slow. Specifically, the researcher was able to identify and evaluate strategies and procedures for using dynamic testing methods to rapidly …

I-Complexity And Discrete Derivative Of Logarithms: A Symmetry-Based Explanation, Vladik Kreinovich, Jaime Nava

Departmental Technical Reports (CS)

In many practical applications, it is useful to consider Kolmogorov complexity K(s) of a given string s, i.e., the shortest length of a program that generates this string. Since Kolmogorov complexity is, in general, not computable, it is necessary to use computable approximations K_~(s) to K(s). Usually, to describe such an approximations, we take a compression algorithm and use the length of the compressed string as K_~(s). This approximation, however, is not perfect: e.g., for most compression algorithms, adding a single bit to the string $s$ can drastically change the value K_~(s) -- while …

Computation In Quantum Space-Time Could Lead To A Super-Polynomial Speedup, Vladik Kreinovich, Michael Zakharevich

Departmental Technical Reports (CS)

Expression And Characterization Of Protein Chimera With Embedded Activated Protein C Generation, Minjeong Schneider

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Increasing demand of medical implants has lead researchers to develop biomaterial surfaces that offer improved performance and lower thrombogenecity. There have been attempts to model biomaterial surfaces after the native endothelium as it represents an optimal non-thrombotic surface. Typically, when biomaterials are contacted with blood, they often invoke the activation of clotting cascades. Thus, to overcome surface mediated thrombotic events, proteins and molecules with anticoagulant attributes of the endothelium have been immobilized onto biomaterial surfaces. Protein C (PC) plays a main role in blood coagulation and acts as an anticoagulant when it is converted into activated protein C (APC). Activation …

Effect Of Processing, Packaging And Vibration Treatment On The Sensory Quality Of Fresh-Cut Apple Slices, M. Siddiq, J. B. Harte, S. P. Singh, A. A. Khan, K. D. Dolan, Koushik Saha

Industrial Technology and Packaging

Fresh-cut fruit industry has seen tremendous growth in recent years. The present study was designed with the objective of studying the sensory quality of fresh-cut apple slices that were treated with different antibrowning agents, packed in three types of packaging materials and subjected to vibration treatment to simulate commercial transportation. The slices were treated with two commercial antibrowning agents [NatureSeal (Mantrose-Haeuser Co., Inc., Westport, CT, USA) and Ever-Fresh (Kraft Foods, Inc., Rye Brook, NY, USA)] at 5% (w/v) application rate. The treated slices were packaged in 5 oz polystyrene rigid container, 2 lb polyethylene bag or 2 oz polyethylene bag. …

Application Of Shredded-Tire Biofilter And Membrane Bioreactor For Greywater Reclamation, Meng Hu

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Water scarcity is a pressing global issue. Greywater (GW) reclamation is a viable option to reduce freshwater demand. The objectives of this work were to: a) evaluate the feasibility of the combination of shredded tire biofilter (STB) technology and membrane bioreactor (MBR) technology in GW reclamation; b) study the effects of various parameters on STB performance; and c) understand the fouling mechanisms to lower the energy consumption in MBRs. Bench-scale STBs and MBRs (flat-sheet membranes) were constructed to address the first two objectives, while an independent membrane (hollow-fiber membranes) fouling experiment was designed for the third objective.

It was found …

Articulated Mechanism Design And Kinematics For Natural Orifice Translumenal Endoscopic Surgery Robot, Wei Jian Chin

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Natural Orifice Translumenal Endoscopic Surgery (NOTES) is a fairly recent surgical approach that eliminates the need for external incisions on the patient. NOTES takes the minimally invasive surgery paradigm a step further by using a natural orifice as the pathway to transport surgical tools to the surgical site and completely eliminating the need for even the smallest incision on the skin. Although the concept of NOTES has been in existence for the past decade, technological deficiencies prevent it from being widely accepted in human surgeries. A novel multifunctional robot for NOTES has been developed to overcome these limitations and make …

Energy Harvesting Systems Design For Railroad Safety, Abolfazl Pourghodrat

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Railroad grade crossings are locations of significant interest for prevention of collisions, injuries and fatalities. Another area of concern is derailments resulting from mechanically deficient track structures. Many of these incidents occur in remote areas due to the lack of electrical infrastructure to power automated warning systems and/or track health monitoring sensor networks.

Providing electrical infrastructure to railroad crossings in remote areas is often not economical, and other alternative sources of electricity such as solar and wind energy are not reliable or robust. This motivated development of devices for in situ energy harvesting.

Initially, an improved mechanical energy harvesting device …

Six Degree Of Freedom Miniature In Vivo Robot For Laparoendoscopic Single-Site Surgery, Ryan L. Mccormick

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The shift in surgery from open procedures to minimally invasive surgery (MIS) techniques have provided benefits of decreased recovery time, improved cosmetic results, and reduced costs. As advances in MIS move to minimize the number of external incisions, such as with Laparoendoscopic Single-Site (LESS) surgery, additional complexities are introduced. These complexities, including unintuitive controls, reduced dexterity, and limited workspace, hinder these methods from more widespread implementation in more complicated surgical procedures.

Through the use of a miniature in vivo robotic surgical platform designed for LESS surgery, these complexities can be mitigated, allowing for wider adoption of MIS by placing the …

Simulation And Control System Of A Railroad Track Power Harvesting Device, Kyle J. Phillips

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

With the vastness of existing railroad infrastructure, there exist numerous road crossings which are lacking warning light systems and/or crossing gates due to their remoteness from existing electrical infrastructure. Along with lacking warning light systems, these areas also tend to lack distributed sensor networks used for railroad track health monitoring applications. With the power consumption required by these systems being minimal, extending electrical infrastructure into these areas would not be an economical use of resources. This motivated the development of an energy harvesting solution for remote railroad deployment.

This thesis describes a computer simulation created to validate experimental on-track results …

Structural Health Monitoring Of Historic Masonry Monuments, Saurabh Prabhu

All Theses

Structural Health Monitoring (SHM) is a well-accepted diagnostic technique being used to evaluate modern structures. This method involves monitoring the vibration response of a structure to detect changes in its structural state. The primary intention of this thesis is to address two practical and technical difficulties encountered in deploying SHM on historic masonry monuments: (i) the selection of suitable low dimensional vibration response features that are highly sensitive to the presence and extent of damage, while having low sensitivity to extraneous noise and (ii) the selection of optimal sensor locations for efficient system identification applied to Gothic Cathedrals. Both of …

Modeling And Finite Element Alaysis Of Fluid Structure Interaction In A Wind Energy Harvester, Bargav Cheruku

All Theses

An energy harvesting system inspired by musicplaying harmonicas was developed for microwind power generation. The energy harvester uses flow-induced self-sustained oscillations of a piezoelectric beam embedded within a chamber to generate electric power. While the power generation capability of the energy harvester has been demonstrated previously, there is a lack of understanding behind the basic physics of the driving mechanism responsible for the self-sustained oscillations. In addition, the performance of the nonlinear multi-physics system with strong fluid and structure coupling depends on many physical and design parameters. A systematic study on the effects of these parameters is necessary for the …

The Effect Of Barrier Properties Of Non-Foil Retort Films On Shelf Life Of Oxygen Sensitive Foods, Mahalaxmi Dharman

All Theses

A simulated food product sensitive to oxygen, which was a mixture of tomato paste, water, and corn oil (2:2:1), was filled into five different barrier coated pouches, a foil barrier and a low barrier pouch. These pouches were thermally processed at 250¡F for 30 minutes and stored in darkness under accelerated conditions (45±2¡C and 50±2%RH) for up to 180 days.
The simulant was analyzed for lipid oxidation by TBARS and lycopene degradation by colorimetry (L*,a*,b* values and Hue angle). The oxygen permeability (OP) in all the pouches increased by 5 to 500 fold after retort. TBARS values in all pouches …

Determination Of Freshwater Algal Biomass And Sulfolipid Content As Functions Of Inorganic Carbon Treatment, Melissa Morella

All Theses

Cultures of mixed freshwater algae were grown in open batch reactors made up of modified BG-11 media that contained 0, 25, 50 or 100% of the suggested inorganic carbon content (0, 0.5, 0.1 and 0.2 g/L Na₂CO₃) to assess the subsequent production of the high-value product, sulfoquinovosyl diacylglycerol (SQDG). After 25 days of growth, the reactors were composed of primarily Oscillatoria growth. All four reactors exhibited a trend of increasing biomass and alkalinity with time, and an initial increase then decrease in pH. The total inorganic carbon (TIC) in all reactors exhibited a mirrored, opposite trend …

Sediment Based Turbidity Analyses For Representative South Carolina Soils, Katherine Resler

All Theses

Construction activities have been recognized to have significant impacts on the environment. Excess sediment from construction sites is frequently deposited into nearby surface waters, negatively altering the chemical, physical and biological properties of the water body. This environmental concern has led to strict laws concerning erosion and sediment control, such as imposing permit conditions that limit the concentration of suspended solids that can be present in effluent water from construction sites. However, sediment concentration measurements are not routinely used to detect and correct short-term problems or permit violations because laboratory analysis of sediment concentrations is time-consuming and costly. Nevertheless, timely, …

Effect Of Accelerated Aging On Mechanical Properties And Structure Of Nano-Scale Composite Systems, David Economy

All Theses

Nano-scale composites are being investigated by academic, industrial, and national laboratories for potential applications such as wear resistant coatings and high strength foils. These structures are of interest due to their as-fabricated mechanical properties, such as high strength for nanolaminates. However, there have only been limited studies of the long-term mechanical stability. A greater understanding of how these systems might respond to sustained use is needed before these systems transition from research laboratories into widespread application. It is the objective of this thesis to clarify the link between accelerated aging using elevated temperatures over time and mechanical properties of two …

An Empirical Investigation Of Supply Chain Excellence In Healthcare, Brian Keith Smith

Graduate Theses and Dissertations

This research is motivated by opportunities to improve the cost and quality of healthcare delivery through improved supply chain processes. This research assesses the quality of the healthcare supply chain and identifies factors that are driving supply chain excellence among organizations in the healthcare industry. The first objective of this research is to assess the state of quality measurement in the healthcare supply chain. The achievement of this first objective is presented in Chapter 3 of this dissertation in the form of a manuscript accepted for publication in The Quality Management Journal. The second research objective is to develop …

Effectiveness Study Of Non-Nuclear Gauge For Hot Mix Asphalt (Hma) Pavement Construction, Ziqing Zhuang

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Density is an important measure for hot-mix asphalt (HMA) pavement quality control. Traditionally, the nuclear gauge method is widely used in pavement density testing. However, some disadvantages of nuclear gauges (such as the handling, storage, and transportation of radioactive materials) have created the need of non-nuclear technology. This thesis evaluated the Pavement Quality Indicator (PQI) model 301, which was promised to be more efficient than the nuclear method. The PQI utilizes many electrical impedance principles by using the current going through the pavement to determine its density and moisture content. Test data were collected in the field during pavements, and …

Effectiveness Study On Temporary Pavement Marking Removals Methods, Koudous Kabassi

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

This study was conducted to identify effective temporary marking removal methods and procedures on concrete and asphalt pavements. Pavement markings provide guidance to road travelers and can lead to accidents when not properly removed. Current state guidelines on removal do not provide clear and objective methods of measurement. After testing the most common removal methods, this research concluded that removing markings by chemical was not only cost and results-oriented effective compared to other methods, but it was also safe to the environment and road users. Finally, a baseline of measurements was developed for this project, along with the feasibility of …

Biomedical Signal Transceivers, Reza Fazel-Rezai, Noah Root, Ahmed Rabbi, Duckhee Lee, Waqas Ahmad

Electrical Engineering Faculty Publications

With the growing costs of healthcare, the need for mobile health monitoring devices is critical. A wireless transceiver provides a cost effective way to transmit biomedical signals to the various personal electronic devices, such as computers, cellular devices, and other mobile devices. Different kinds of biomedical signals can be processed and transmitted by these devices, including electroencephalograph (EEG), electrocardiograph (ECG), and electromyography (EMG). By utilizing wireless transmission, the user gains freedom to connect with fewer constraints to their personal devices to view and monitor their health condition.

In this chapter, in the first few sections, we will introduce the reader …

Targeted Multistage Delivery Of Nanoparticles To The Bone Marrow, Aman Mann

Dissertations and Theses (Open Access)

Bone marrow is a target organ site involved in multiple diseases including myeloproliferative disorders and hematologic malignancies and metastases from breast and prostate. Most of these diseases are characterized with poor quality of life, and the treatment options are only palliative due to lack of delivery mechanisms for systemically injected drugs which results in dose limitation to protect the healthy hematopoietic cells. Therefore, there is a critical need to develop effective therapeutic strategies that allow for selective delivery of therapeutic payload to the bone marrow. Nanotechnology-based drug delivery systems provide the opportunity to deliver drugs to the target tissue while …

In-Vivo Ct Dosimetry During Virtual Colonoscopy, Jonathon W. Mueller

Dissertations and Theses (Open Access)

Virtual colonoscopy (VC) is a minimally invasive means for identifying colorectal polyps and colorectal lesions by insufflating a patient’s bowel, applying contrast agent via rectal catheter, and performing multi-detector computed tomography (MDCT) scans. The technique is recommended for colonic health screening by the American Cancer Society but not funded by the Centers for Medicare and Medicaid Services (CMS) partially because of potential risks from radiation exposure. To date, no in‐vivo organ dose measurements have been performed for MDCT scans; thus, the accuracy of any current dose estimates is currently unknown.

In this study, two TLDs were affixed to the inner …

Evaluation Of Safe Routes To School Programs: Qualitative And Quantitative Analysis Of Parental Decision-Making, Lynn Weigand, Noreen Mcdonald

TREC Final Reports

In the United States, walking to school declined from 42% of 5-18 year olds in 1969 to 16% in 20011. The US Department of Transportation has responded to this dramatic decrease by funding the Safe Routes to School program for $612 million in SAFETEA-LU. The program’s funding emphasize infrastructure improvements such as completing sidewalks and adding crosswalks by requiring between 70% and 90% of funding be allocated toward infrastructure. However, recent research shows that 2 of 3 children who currently are driven to school, but live close enough to walk, do so because it is more convenient for parents. Currently, …

Clinical Risk Factors For Osteoporosis In Ireland And The Uk: A Comparison Of Frax And Qfracturescores, N. M. Cummins, E. K. Poku, Mark R. Towler, O. M. O'Driscoll, S. H. Ralston

Chemical and Biochemical Engineering Faculty Research & Creative Works

Recently two algorithms have become available to estimate the 10-year probability of fracture in patients suspected to have osteoporosis on the basis of clinical risk factors: the FRAX algorithm and QFractureScores algorithm (QFracture). The aim of this study was to compare the performance of these algorithms in a study of fracture patients and controls recruited from six centers in the United Kingdom and Ireland. A total of 246 postmenopausal women aged 50-85 years who had recently suffered a low-trauma fracture were enrolled and their characteristics were compared with 338 female controls who had never suffered a fracture. Femoral bone mineral …

Applying Inventory Control Practices Within The Sisters Of Mercy Health Care Supply Chain, Server Apras

Graduate Theses and Dissertations

This research lays a foundation for the better understanding of the application and acceptance of more advanced inventory control practices within the health care supply chain. The demand characteristics and optimal control policies for pharmaceutical items within a multi-echelon provider network are examined within the framework of a case study. Demand forecasting algorithms were applied to forecast demand for inventory control procedures. A spreadsheet-based inventory planning tool was used to minimize the inventory holding and ordering costs subject to fill rate constraints. The costs of inventory control models are compared to the current ordering and inventory control strategies to document …

Capturing The Lost Phosphorus, Bruce E. Rittmann, Brooke K. Mayer, Paul Westerhoff, Mark Edwards

Civil and Environmental Engineering Faculty Research and Publications

Minable phosphorus (P) reserves are being depleted and will need to be replaced by recovering P that currently is lost from the agricultural system, causing water-quality problems. The largest two flows of lost P are in agricultural runoff and erosion (∼46% of mined P globally) and animal wastes (∼40%). These flows are quite distinct. Runoff has a very high volumetric flow rate, but a low P concentration; animal wastes have low flow rates, but a high P concentration together with a high concentration of organic material. Recovering the lost P in animal wastes is technically and economically more tractable, and …

The Effects Of Weather Recognition Training On General Aviation Pilot Situation Assessment And Tactical Decision Making When Confronted With Adverse Weather Conditions, Chansik Kim

All Dissertations

Previous general aviation (GA) accident studies showed that decision errors were more associated with fatal GA accidents than other kinds of human errors, and weather related accidents, especially continued visual flight rules (VFR) flight into instrument meteorological conditions (IMC), remained the major cause of fatal GA accidents. Thus, finding the underlying causes of GA pilots' decision errors and continued VFR flight into adverse weather conditions are needed to reduce weather related GA accidents as well as fatal GA accidents.
Causal factors and hypotheses of weather related GA accidents show that knowledge, experience, motivation, and weather information frequently have been referred …

Social Sustainability Considerations During Planning And Design: A Framework Of Processes For Construction Projects, Rodolfo Valdes Vasquez

All Dissertations

With increased awareness of issues such as global resource shortages and climate change, sustainability efforts are becoming more common in the construction industry. While these efforts often consider economic and environmental factors, a truly sustainable construction project also needs to include such social considerations as its impact on the surrounding community and the safety, health, and education of the workforce. For the construction industry, social sustainability requires integrating processes for improving safety, health and well-being over the project life cycle. However, an empirical and comprehensive framework defining these social sustainability processes in construction projects has yet to be clearly delineated. …

Evaluating The Capacity Of A Proton Therapy Facility, Ridvan Gedik

Graduate Theses and Dissertations

A relatively new consideration in proton therapy planning is the requirement that the mix of patients treated satisfy desired percentages. Since it is very dicult to satisfy an integer number of patients in light of these requirements, deviations from patient mix preferences and their impacts on operational capabilities are of particular interest to healthcare planners. Therefore, we propose a bicriteria mathematical programming model that determines an outpatient schedule maximizing the number of fractions and minimizing the deviations from the patient mix ratios over the planning horizon. The tradeos between the two objectives are identied through analysis of ecient frontiers. Our …

Using Discrete Event Computer Simulation To Analyze The Effects Of Proposed Changes To Personnel In A Hospital Medical Laboratory, Gerardo Morales

Theses and Dissertations - UTB/UTPA

A discrete event computer simulation is used to model a portion of the medical laboratory at Doctors Hospital at Renaissance in order to assess the current situation as well as to review the planed personnel changes. The area under observation is the section in which the processor(s) receive, label and distribute the patient samples. There are four cases modeled in the simulation: The main focus is to determine if one or two processors are needed per shift and if the high level of phone calls poses a significant delay to the processors’ workflow. The simulation results indicate that having two …