Digital Commons Network^™

Population - Activities, Jane Qiong Zhang, Linda Vanasupa

Materials Engineering

The document contains activities for students in higher education. These activities are focused on population issues related to sustainability. It is designed for the general engineering or science audience. Its design is based on the framework of the Fink Taxonomy of Significant Learning. Each activity includes a profile that indicates whether the activity involves direct or indirect information sources, whether the experience is doing or observing and whether it involves individual or group reflection. The profile also includes notes for faculty, an estimate of the time investment, a graphic of the developmental aims with respect to the six areas of …

Implementing A Long-Term Bridge Monitoring Strategy For A Composite Steel Girder Bridge, Shelley Plude

Master's Theses

The University of Connecticut and the Connecticut Department of Transportation have established a long-term bridge health monitoring system to monitor critical vulnerabilities in a group of bridges throughout the state. This research focuses on a three-span, simply supported composite steel girder bridge carrying three lanes of highway traffic. It has been a part of the University of Connecticut and Connecticut Department of Transportation monitoring network since 2004 and is fitted with 20 strain gauges located at midspan at the top and bottom of the web of each girder.

To monitor the critical vulnerabilities of the bridge, it is important to …

A Field And Modeling Assessment Of Methyl Mercury Accumulation In An Engineered Retention Pond, Lauren C. Blazeck

Master's Theses

The accumulation of methyl mercury (MeHg) in lakes during summer stratification has been demonstrated to affect biotic mercury (Hg) accumulation. However, small, shallow polymictic lakes can experience short-term stratification and mixing events that are largely unstudied in their abilities to affect Hg cycling and MeHg accumulation. Short-term stratification events and changing lake characteristics impact lake biogeochemical cycles, and therefore, MeHg production and transport. A field and modeling analysis was performed on a small suburban lake located on the University of Connecticut campus to determine the impact of lake characteristics on the potential for MeHg accumulation. MeHg concentrations ranged from non-detect …

Automation Of Orthodontic Wire Tester For Performing Three Point Bending Tests, Adithya Venkatesan

Master's Theses

Abstract

Understanding the biomechanical factors in orthodontics is important in order to improve the overall effectiveness of actual clinical treatment. An accurate method to study the threedimensional (3D) force systems and the resulting movements of teeth during orthodontic treatment is needed along with the understanding of the material properties of any orthodontic wire. Until recently, most of the orthodontic biomechanics literature was limited to twodimensional experimental studies. Recent advances in threedimensional computer modeling have also been developed but have been limited to the manual control of tooth movement. Overall, there is very little published evidence in the literature on the …

Glucose Biosensor Using Electrospun Mn2o3-Ag Nanofibers, Shan Huang

Master's Theses

The highly porous Mn₂O₃-Ag nanofibers were fabricated by a facile two-step procedure (electrospinning and calcination) and then employed as the immobilization matrix for glucose oxidase (GOD) to construct an amperometric glucose biosensor. A notable enhancement of direct electron transfer between GOD and the electrode is observed at the Mn₂O₃-Ag-GOD modified electrode with a fast electron transfer rate constant. The biosensor also shows fast response to glucose, high sensitivity (40.60 μA×mM^-1×cm^-2), low detection limit (1.73 µM at S/N=3), low K_m,app value and excellent selectivity. These results indicate that …

Plasmonic Nanogels With Robustly Tunable Optical Properties, Tao Cong, Satvik N. Wani, Georo Zhou, Elia Baszczuk, Radhakrishna Sureshkumar

Biomedical and Chemical Engineering - All Scholarship

Low viscosity fluids with tunable optical properties can be processed to manufacture thin film and interfaces for molecular detection, light trapping in photovoltaics and reconfigurable optofluidic devices. In this work, self-assembly in wormlike micelle solutions is used to uniformly distribute various metallic nanoparticles to produce stable suspensions with localized, multiple wavelength or broad-band optical properties. Their spectral response can be robustly modified by varying the species, concentration, size and/or shape of the nanoparticles. Structure, rheology and optical properties of these plasmonic nanogels as well as their potential applications to efficient photovoltaics design are discussed.

Effects Of Sprinkler, Partial Sprinkler/Drip, And Drip Only Irrigation On Strawberry Transplants 2010-2011, Stuart Styles

BioResource and Agricultural Engineering

The purpose of the project is to develop an analysis of the current irrigation practices of the strawberry growers on the Central Coast of California. The primary research evaluation is during the establishment of transplants where sprinklers are typically used even though drip irrigation is available. Growers have been selected from Oxnard, Santa Maria, and Watsonville to provide a good cross section of the different strawberry growing areas.

The specific objectives of the project are to: (1) set up a research areas and control plots on a demonstration scale, (2) determine the key factors that affect the problems in early …

Ceas E-News 08.18.2011, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

Casting Challenge, First Annual SAE Alumni Drive, Best Poster

Contribution Of Proteoglycan Osmotic Swelling Pressure To The Compressive Properties Of Articular Cartilage, Eunhee Han, Silvia S. Chen, Stephen M. Klisch, Robert L. Sah

Mechanical Engineering

The negatively charged proteoglycans (PG) provide compressive resistance to articular cartilage by means of their fixed charge density (FCD) and high osmotic pressure (π_PG), and the collagen network (CN) provides the restraining forces to counterbalance π_PG. Our objectives in this work were to: 1), account for collagen intrafibrillar water when transforming biochemical measurements into a FCD-π_PG relationship; 2), compute π_PG and CN contributions to the compressive behavior of full-thickness cartilage during bovine growth (fetal, calf, and adult) and human adult aging (young and old); and 3), predict the effect of depth from the articular …

Investigating The Safety Cognition Of Taiwan's Construction Personnel, Wei Tong Chen, Chun Sheng Lu, Ying-Hua Huang

Journal of Marine Science and Technology–Taiwan

A high construction accident rate is related to failures in the implementation of safety management. The rate of occupational injuries of Taiwan construction industry is higher than the ones of the developed counties. Knowledge and reinforcement of safety cognition for construction personnel are critical to improve safety performance in construction. In this study, a safety cognition evaluation scale is developed to measure the safety cognition of construction personnel in Taiwan. The safety cognition of construction personnel was ranked in descending order of safety engineers, contractor-related personnel, and design/audit personnel. The aspect of accident statistics has the smallest cognition differences while …

An Integrated Quantitative Risk Analysis Method For Major Construction Accidents Using Fuzzy Concepts And Influence Diagram, Yong-Huang Lin, Chen-Chung Lin, Yaw-Yauan Tyan

Journal of Marine Science and Technology–Taiwan

The accident factor identification and risk assessment is an essential requirement for prevention of major construction accidents in the construction project process. An integrated quantitative risk assessment (IQRA) method has been proposed in this paper to overcome the problems of difficult to quantify accident probability for construction industry. The proposed approach employs influence diagram and fuzzy theory to estimate accident probability and to deal with the imprecision inherent to the process of subjective judgment. A case study that evaluates accident probability of diaphragm wall collapse is presented to illustrate the use of this methodology and to demonstrate its capability.

Transcriptome Sequencing Of The Blind Subterranean Mole Rat, Spalax Galili: Utility And Potential For The Discovery Of Novel Evolutionary Patterns, Assaf Malik, Abraham Korol, Sariel Hubner, Aaron Avivi, Alvaro Hernandez, Jyothi Thimmapuram, Shahjahan Ali, Mark Bond, Fabian Glaser, Arnon Paz

Cyber Center Publications

The blind subterranean mole rat (Spalax ehrenbergi superspecies) is a model animal for survival under extreme environments due to its ability to live in underground habitats under severe hypoxic stress and darkness. Here we report the transcriptome sequencing of Spalax galili, a chromosomal type of S. ehrenbergi. cDNA pools from muscle and brain tissues isolated from animals exposed to hypoxic and normoxic conditions were sequenced using Sanger, GS FLX, and GS FLX Titanium technologies. Assembly of the sequences yielded over 51,000 isotigs with homology to ~12,000 mouse, rat or human genes. Based on these results, it was …

Undergraduate Research Opportunities Program 2011, Nicholle Booker, University Of Nevada, Las Vegas

Undergraduate Research Opportunities Program (UROP)

Undergraduate Research Opportunities Program

On August 9, 2011 the UNLV College of Sciences will celebrate the accomplishments of undergraduate students participating in the Summer 2011 Undergraduate Research Opportunities Program (UROP) and the Research Experience For Undergraduates (REU) Program.

The public is invited to attend, beginning at 10:00 a.m.

Please join us to view student research posters. Student research topics include: biomedicine and human health, Nevada's fragile environment and ecosystems, climate change, stem cell research, microbiology, astrophysics, and many others.

Over 25 UNLV undergraduates and a cohort of 25 undergraduates selected from colleges and universities across the nation will mark the …

Methods Of Using Black Bear Parathyroid Hormone, Seth W. Donahue

Michigan Tech Patents

Black bear parathyroid hormone (PTH) and functional fragments thereof are provided. Also provided are methods of using black bear PTH and functional fragments for increasing cAMP in a bone-forming cell; reducing apoptosis in a boneforming cell; decreasing the ratio of expression levels of Bax protein to Bcl-2 protein in a bone-forming cell; increasing the expression level of one or more of a bone matrix protein, a transcriptional activator, or a transcriptional regulator in a bone-forming cell; enhancing bone mineral density, increasing bone mass, decreasing bone loss, or reducing the incidence of bone fractures, or any combination thereof, in a subject; …

Automated Polysomnographic Assessment For Rapid Eye Movement Sleep Behavior Disorder, Joseph W. Burns, Ronald D. Chervin

Michigan Tech Patents

Methods and systems for diagnosing or assessing rapid eye movement sleep behavior disorder (RBD). Muscle tone or activity variance during rapid eye movement (REM) and nonrapid eye movement (NREM) sleep intervals of a polysom- nogram are compared. A threshold based on the NREM data is used to identify a subj ect-specific threshold for abnormality in the REM variance. A metric that includes the percentage of REM variance exceeding the threshold relates to RBD.

Collaborative Products: A Design Methodology With Application To Engineering-Based Poverty Alleviation, Jacob S. Morrise

Theses and Dissertations

Collaborative products are created when physical components from two or more products are temporarily recombined to form another product capable of performing entirely new tasks. The method for designing collaborative products is useful in developing products with reduced cost, weight, and size. These reductions are valued in the developing world because collaborative products have a favorable task-per-cost ratio. In this paper, a method for designing collaborative products is introduced. The method identifies a set of products capable of being recombined into a collaborative product. These products are then designed to allow for this recombination. Three examples are provided to illustrate …

Special Issue On The 6th International Phytotechnologies Conference, St. Louis, Missouri, 2009: Conference Review, Joel G. (Gerard) Burken, Jason C. White

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

A Study On Remaining Useful Life Prediction For Prognostic Applications, Gang Liu

LSU New Orleans Theses and Dissertations

We consider the prediction algorithm and performance evaluation for prognostics and health management (PHM) problems, especially the prediction of remaining useful life (RUL) for the milling machine cutter and lithium ‐

ion battery. We modeled battery as a voltage source and internal resisters. By analyzing voltage change trend during discharge, we made the prediction of battery remain discharge time in one discharge cycle. By analyzing internal resistance change trend during multiple cycles, we were able to predict the battery remaining useful time during its life time. We showed that the battery rest profile is correlated with the RUL. Numerical results …

Ceas E-News 08.03.2011, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

BTR Bike Race, Sunseeker Events

Carotid Plaque Regression Following 6-Month Statin Therapy Assessed By 3t Cardiovascular Magnetic Resonance: Comparison With Ultrasound Intima Media Thickness, Raymond Q. Migrino, Mark Bowers, Leanne Harmann, Robert W. Prost, John F. Ladisa

Biomedical Engineering Faculty Research and Publications

Background

Cardiovascular magnetic resonance (CMR) allows volumetric carotid plaque measurement that has advantage over 2-dimensional ultrasound (US) intima-media thickness (IMT) in evaluating treatment response. We tested the hypothesis that 6-month statin treatment in patients with carotid plaque will lead to plaque regression when measured by 3 Tesla CMR but not by IMT.

Methods

Twenty-six subjects (67 ± 2 years, 7 females) with known carotid plaque (> 1.1 mm) and coronary or cerebrovascular atherosclerotic disease underwent 3T CMR (T1, T2, proton density and time of flight sequences) and US at baseline and following 6 months of statin therapy (6 had initiation, …

Flight Physician - August, 2011, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A sixteen page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Acuta Enews August 2011, Vol 40, No. 8

ACUTA Newsletters

ln This lssue

From ACUTA Headquarters.......... Corinne Hoch, lnterim Executive Director

Hosted/Cloud Provider Checklist .Gary Audin, Delphi, lnc.

ACUTA Webinar: Transitioning to lPv6 on Your Campus

Connecting in the Digital Age............. . Buck Bayliff, PCR

Campus Tech a Top Factor in College Selection and Perceived Career Success

lnfo Links ........... .. Randy Hayes, Univ. of Northern lowa

View 8 Sessions from the Summer Seminar at Your Desktop

Come to Boston!

Board Report......... Riny Ledgerwood, SDSU

Welcome New Members

Check lt Out: press Releases...Job Postings.,.RFls/RFPs...Special Deals!...Corporate Webinars

Effect Of Au Content On Microstructural Evolution Of Snagcu Solder Joints That Undergo Isothermal Aging And Reliability Testing, Patrick J. Hyland

Master's Theses

Electronics, especially, printed circuit boards (PCBs) are a widespread technology. Metal coatings or “surface finishes” are often added to PCB board pads and component leads during manufacturing to improve their performance. Electroplated nickel/gold over copper is a popular surface finish for printed circuit boards and component leads. The presence of gold in solder joints, however, is known to have detrimental effects referred to as gold embrittlement. It is generally understood that tin-lead solder joints with less than 3 weight percent (wt%) of gold will not experience reliability issues. The acceptable level of gold in lead-free solder joints, however, is less …

Prediction In Econometrics: Towards Mathematical Justification Of Simple (And Successful) Heuristics, Vladik Kreinovich, Hung T. Nguyen, Songsak Sriboonchitta

Departmental Technical Reports (CS)

Many heuristic and semi-heuristic methods have been proposed to predict economic and financial processes. Some of these heuristic processes are intuitively reasonable, some seemingly contradict to our intuition. The success of these heuristics leads to a reasonable conjecture that these heuristic methods must have a more fundamental justification. In this paper, we provide such a justification for two simple (and successful) prediction heuristics: of an intuitive exponential smoothing that provides a reasonable prediction for slowly changing processes, and of a seemingly counter-intuitive idea of an increase in volatility as a predictor of trend reversal. As a possible application of these …

Reconstructing An Open Order From Its Closure, With Applications To Space-Time Physics And To Logic, Francisco Zapata, Vladik Kreinovich

Departmental Technical Reports (CS)

In his logical papers, Leo Esakia studied corresponding ordered topological spaces and order-preserving mappings. Similar spaces and mappings appear in many other application areas such the analysis of causality in space-time. It is known that under reasonable conditions, both the topology and the original order relation can be uniquely reconstructed if we know the "interior" < of the order relation. It is also known that in some cases, we can uniquely reconstruct < (and hence, topology) from the original order relation. In this paper, we show that, in general, under reasonable conditions, the open order < (and hence, the corresponding topology) can be uniquely determined from its closure.

All Kinds Of Behavior Are Possible In Chemical Kinetics: A Theorem And Its Potential Applications To Chemical Computing, Vladik Kreinovich

Departmental Technical Reports (CS)

Linear Neural Networks Revisited: From Pagerank To Family Happiness, Vladik Kreinovich

Departmental Technical Reports (CS)

The study of Artificial Neural Networks started with the analysis of linear neurons. It was then discovered that networks consisting only of linear neurons cannot describe non-linear phenomena. As a result, most currently used neural networks consist of non-linear neurons. In this paper, we show that in many cases, linear neurons can still be successfully applied. This idea is illustrated by two examples: the PageRank algorithm underlying the successful Google search engine and the analysis of family happiness.

Density-Based Fuzzy Clustering As A First Step To Learning The Rules: Challenges And Possible Solutions, Gözde Ulutagay, Vladik Kreinovich

Departmental Technical Reports (CS)

In many practical situations, it is necessary to cluster given situations, i.e., to divide them into groups so that situations within each group are similar to each other. This is how we humans usually make decisions: instead of taking into account all the tiny details of a situation, we classify the situation into one of the few groups, and then make a decision depending on the group containing a given situation. When we have many situations, we can describe the probability density of different situations. In terms of this density, clusters are connected sets with higher density separated by sets …

Decisive Disaster Debris Management, Nazli Yesiller

Civil and Environmental Engineering

No abstract provided.

How To Encourage Imperfect Individuals To Care More About Society In General: A Utility-Theory Approach, Vladik Kreinovich

Departmental Technical Reports (CS)