Digital Commons Network^™

Geospatial And How It's Used By Casfer, Eduardo A. Castillo, Olatunde D. Akanbi, Vibha S. Mandayam, Erika I. Barcelos, Roger H. French

Student Scholarship

Project CASFER has a goal to develop the next generation of decarbonized nitrogen based fertilizer. They want to do this by

• Capturing nitrogen from waste, recycling the nitrogen, then producing and distributing CASFER fertilizers to farmers. 

CASFER is made up of 5 different universities that all work together to make up CASFER, Texas Tech University, Case Western University, FAMU, Georgia tech, and MIT.

Development And Operationalizing Of The Learning Experience Design Process To Create Integrated Stem Interventions, Vanessa Begat

LSU Doctoral Dissertations

Globally, the demand for people prepared to enter Science, Technology, Engineering and Math (STEM) careers is increasing. To help fill this demand, many formal and informal STEM educational interventions have been implemented in the K-12 domain. However, due to the lack of a clearly defined framework for documenting the nature and scope of the intervention (National Research Council, 2014), the interventions vary greatly in their success, sustainability, and replicability. This research is grounded in Educational Design Research and uses the principle of Learning Experience Design (LXD) to develop a framework for thoughtfully designing and documenting a STEM intervention. This framework …

Characterizing And Manipulating Intra-Die Performance Variation Of Fpgas And Its Application In Security, Hayden C. Cook

Theses and Dissertations

Field Programmable Gate Arrays (FPGAs) are reconfigurable, high-performing devices that are often used in critical applications. However, like all semiconductors, FPGAs experience transistor aging that can lower performance and lead to device failures. Additionally, device aging also has several security implications. Therefore, understanding the aging mechanisms behind transistor aging is necessary to ensure the reliability of FPGAs. However, current aging studies either rely on simulation alone or are unable to isolate aging effects on specific elements within the FPGA. This dissertation uses the reconfigurability of FPGAs to develop novel aging techniques that allow for the targeted aging of specific areas …

Early Detection Of Pipeline Natural Gas Leakage From Hyperspectral Imaging By Vegetation Indicators And Deep Neural Networks, Pengfei Ma, Tarutal Ghosh Mondal, Zhenhua Shi, Mohammad Hossein Afsharmovahed, Kevin Romans, Liujun Li, Ying Zhuo, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The timely detection of underground natural gas (NG) leaks in pipeline transmission systems presents a promising opportunity for reducing the potential greenhouse gas (GHG) emission. However, existing techniques face notable limitations for prompt detection. This study explores the utility of Vegetation Indicators (VIs) to reflect vegetation health deterioration, thereby representing leak-induced stress. Despite the acknowledged potential of VIs, their sensitivity and separability remain understudied. In this study, we employed ground vegetation as biosensors for detecting methane emissions from underground pipelines. Hyperspectral imaging from vegetation was collected weekly at both plant and leaf scales over two months to facilitate stress detection …

On The Surface Topography Of Local Overheating And Plasma Formation Due To Initial Condition Perturbations Sourcing The Electrothermal Instability On High-Current-Density Conductors, Maren Whiting Hatch

Electrical and Computer Engineering ETDs

The electrothermal instability (ETI) is a Joule heating-driven instability that instigates runaway heating on conductors driven to high current density, altering the 3D evolution of the expansion and phase state. Most metals include complex distributions of imperfections (voids, resistive inclusions) which seed ETI. To simplify comparison with modeling and theory, experiments examined growth of ETI from various alloys of stainless steel as well as relatively void/inclusion free, 99.999% pure, diamond-turned, 1 mm-diameter aluminum rods. Aluminum surfaces included a variety of deliberately machined and well-characterized perturbations, including 10-micron-scale quasi-hemispherical voids, or “engineered” defects (ED), and sinusoidal patterns of varying wavelength and …

From Cnns To Transformers In Multimodal Human Action Recognition: A Survey, Muhammad Bilal Shaikh, Douglas Chai, Syed Muhammad Shamsul Islam, Naveed Akhtar

Research outputs 2022 to 2026

Due to its widespread applications, human action recognition is one of the most widely studied research problems in Computer Vision. Recent studies have shown that addressing it using multimodal data leads to superior performance as compared to relying on a single data modality. During the adoption of deep learning for visual modelling in the past decade, action recognition approaches have mainly relied on Convolutional Neural Networks (CNNs). However, the recent rise of Transformers in visual modelling is now also causing a paradigm shift for the action recognition task. This survey captures this transition while focusing on Multimodal Human Action Recognition …

Exploring Equity, Diversity, And Inclusion In Computer Science Undergraduate Curricula, Ouldooz Baghban Karimi, Giulia Toti, Fiona Mcneill, Alice Gao, Rutwa Engineer, Shanon Reckinger, Peggy Lindner, Jinyoung Hur, Rebecca Robinson, Anna Sollazzo, Richard Wicentowski

Engineering Management and Systems Engineering Faculty Research & Creative Works

One of the less explored approaches to foster equity, diversity, and inclusion (EDI) in Computer Science (CS) is through changes to the curriculum. Despite sporadic work on the adoption of Culturally Responsive Computing (CRC) and Universal Design for Learning (UDL), the inclusion of equity-minded courses, or modifications on specific elements of the curriculum such as introductory programming courses, there has never been a wide exploration or adoption of a successful equity-minded undergraduate CS curriculum. In this work, we explore undergraduate CS curricula, with a special focus on upper division, lower division, and service courses (courses offered to non-CS students). For …

Performance Evaluation Of Electrocoagulation System For Wastewater Treatment, Mohamed Ahmed Reda Hamed Dr

Journal of Engineering Research

ABSTRACT

This study aimed to evaluate the performance of an electrocoagulation reactor (EC) and investigate its efficiency in heavy-polluted industrial wastewater treatment. The electrocoagulation (EC) reactor has been experimentally evaluated using aluminium (Al) electrodes and connected to a direct current power at various applied voltage levels at room temperature in a relatively limited reaction time.

The treatment performance efficiency of the selected dominant EC operating parameter groups: pH, reaction time, inter-electrode distance, and applied voltage was investigated. The results demonstrate that the applied voltage to the electrocoagulation reactor was the most significant factor in pollutant removal. The maximum total suspended …

Electrospun Ibuprofen-Loaded Blend Pcl/Peo Fibers For Topical Drug Delivery Applications, Diala Bani Mustafa, Tsuyoshi Sakai, Osamu Sato, Mitsuo Ikebe, Shih-Feng Chou

Mechanical Engineering Faculty Publications and Presentations

Electrospun drug-eluting fibers have demonstrated potentials in topical drug delivery applications, where drug releases can be modulated by polymer fiber compositions. In this study, blend fibers of polycaprolactone (PCL) and polyethylene oxide (PEO) at various compositions were electrospun from 10 wt% of polymer solutions to encapsulate a model drug of ibuprofen (IBP). The results showed that the average polymer solution viscosities determined the electrospinning parameters and the resulting average fiber diameters. Increasing PEO contents in the blend PCL/PEO fibers decreased the average elastic moduli, the average tensile strength, and the average fracture strains, where IBP exhibited a plasticizing effect in …

Robotics Lab With The Lego Spike Prime Robot, Susan Imberman, Tatiana Anderson, Chang Guo, Vladimir Frants, Daniel Agman, Orit D. Gruber

Open Educational Resources

This lab introduces the field of Robotics. Robotics is a field that combines Artificial Intelligence with Engineering. In this lab, the student will be experimenting with the LEGO® Spike Prime Robot. The student's final report should include a copy of all the completed answers, program code, and observations.

After completing this lab experiment, the student will proceed to answer the following questions in the Observations section at the end of the lab report:

• List some applications of robotics in daily living and industry ?

• How does a robot sense and react to its environment?

• What new ideas were observed during …

Drop Dynamics And Heat Transfer During Dropwise Condensation On Superhydrophobic Surfaces, Shaur Humayun

Theses and Dissertations

As we seek to address the escalating demand for energy and water, superhydrophobic surfaces have gained the attention of researchers due to their potential to boost condensation heat transfer rates and improve efficiency across various applications. One way to significantly improve dropwise condensation heat transfer rate is to improve drop mobility. Water-repelling properties of superhydrophobic surfaces can help in reducing the size of condensed drops as they depart the surface, thus increasing drop refresh rates by increasing drop mobility. Accurate models of retention forces between drops and superhydrophobic surfaces are needed for predicting drop dynamics including drop mobility. Once drop …

How To Be In Two Places At Once: A Search For The Immersive Experience In Renaissance Music And Visual Arts., Andrew Hallock

Journal of Network Music and Arts

Immersion is a hot topic, but it is often invoked in a vague or shallow way. This essay aims to arrive at a more nuanced consideration of the immersive experience by presenting some perhaps surprising arguments from the past—from Renaissance music and visual arts—drawing parallels with our own time, and positing that the Network Arts can take inspiration from this history to enhance its own immersive endeavours. Four interrelated topics serve as the basis for this investigation: miniature devotionalia, polyphonic canons, anamorphic puzzles, and early cosmology. By using perspective to disclose hidden meanings, ideas, and realities, these varied practices draw …

Experimentation With Speech Recognition And Word Error Rates, Sarah Zelikovitz, Orit D. Gruber

Open Educational Resources

In this lab you will be using the speech recognition program in Windows. After the initial training session, you will proceed to conduct experiments to evaluate the accuracy of the speech program.

At the end of this lab, you will be able to answer the following questions:

What is the purpose of speech recognition programs ?

• What are some applications of speech recognition programs ?

• What is the metric to evaluate speech recognition programs?

• What parameters are used to test speech recognition programs?

Robust Quantitative Photoacoustic Imaging For Colorectal Cancer Treatment Monitoring, Sitai Kou

McKelvey School of Engineering Graduate Student Theses & Dissertations

Colorectal cancer is the 2nd leading cause of cancer death in the United States and the incidence among population under 50 years old has been increasing for the past decade. Contrary to obvious vascular and morphological structures in pre-treatment colorectal cancer, during treatment and post-treatment colorectal cancer tissue often contains fibrosis and edema in tumor bed. These complications cause difficulties in evaluating tissue response to neoadjuvant chemoradiation therapy with MRI and endoscopy, leading to unnecessary resection of rectum, which increases healthcare cost and impacts patient quality of life. Photoacoustic (PA) imaging is a promising tool for observing blood distribution in …

Deep Learning For Multiple Unmanned Aerial Vehicle Coordination In Air Corridors, Liangkun Yu

Electrical and Computer Engineering ETDs

In the future, city skies will be filled with Unmanned Aerial Vehicles (UAVs) for rapid urban transport, including parcel deliveries and air taxis. NASA's Urban Air Mobility (UAM) envisions UAVs navigating air corridors. These virtual pathways ensure safety and compliance with regulations. However, current research on UAM practical applications is limited. This dissertation focuses on designing air corridors, developing UAV control systems, and ensuring the robustness of control algorithms against disturbances in real-world environments.

Our design features an air corridor system with horizontal lanes and on-off ramps, conceptualized as cylindrical spaces and tori, respectively. To enable each UAV to locally …

Designing A Model For Conservation Agricultural Extension In Western Iran, Mosayeb Gholami, Amirhossien Alibaygi, Abdolhamid Papzan

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

Conservation agriculture is seen as a new solution to environmental degradation and unsusainable water and soil resources. Since the adoption rate for conservation agriculture in Iran is not high, there is a need to design an extension model in this field. The aim of this study was to design an extension model for conservation agriculture in Kermanshah Province, located in the west of Iran. The study involved two groups: experts in conservation agriculture selected via purposeful sampling with a wide range of expertise, and farmers from Ravansar and Sonqor townships in Kermanshah Province, selected through a multistage clustering technique. The …

Improving Performance Of Tpu By Controlled Crosslinking Of Soft Segments, Lucivan P. Barros Jr., Lucio R. De Souza, Rasoul Rahimzadeh, Ica Manas-Zloczower

Faculty Scholarship

Thermoplastic polyurethanes (TPUs) are a family of thermoplastic elastomers with great properties such as high elongation and excellent chemical and abrasion resistance, which are processable by conventional melting methods. Nevertheless, TPUs lose mechanical properties and thermal stability at higher temperatures. In this work, we designed and synthesized a new TPU with limited crosslinking of the soft segments in order to improve its performance at high temperatures while preserving processability. Additionally, the new TPU maintains its transparency. With the incorporation of 10% trifunctional polyol, the T was increased by 7°C, the storage modulus at room temperature (25°C) was improved by 412 …

Examining The Progress In Additive Manufacturing In Supporting Lean, Green And Sustainable Manufacturing: A Systematic Review, Catherine Maware, Rumbidzai Muvunzi, Tinotenda Machingura, Ilesanmi Daniyan

Institute for Sustainable Manufacturing Faculty Publications

The quest for waste reduction and the development of manufacturing processes that meet the economic, social and environmental requirements necessitate this study. Additive manufacturing is an emerging digital technology that can be used to seamlessly develop a product through material deposition in layers. The study aims to investigate the progress made in the development of additive manufacturing to support lean, green and sustainable manufacturing. The study employs a systematic literature review approach, specifically the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA). A total of 158 articles identified from different academic databases that detailed empirical, conceptual and theoretical findings …

Investigation Of Ethane Dehydrogenation And Hydrogenolysis On Pt(111), Pt(211) And Pt(100): Bayesian Quantification And Correction Of Dft-Based Enthalpic And Entropic Uncertainties, Mubarak Bello

Theses and Dissertations

Computational investigations of heterogeneously catalyzed reactions using density functional theory (DFT) are often inaccurate, largely due to uncertainties in the choice of DFT functional (enthalpic uncertainty) and approximations for modeling adsorbate movement along the catalyst surface (entropic uncertainty). This work illustrates that both uncertainties are significant in the investigation of the ethane dehydrogenation (EDH) and hydrogenolysis on Pt catalysts by considering the complete deconstruction of ethane on Pt(111), Pt(211), and Pt(100) using microkinetic modeling (MKM). Hence, this work uses both non-calibrated and Bayesian calibrated MKMs to quantify and correct inaccuracies in macroscopic properties due to both uncertainties. A Bayesian approach …

Beyond The Waterfall: A Review Of Project Management Methodologies In Stem, Yessenia Henriquez, Brendan O'Toole

Entertainment Engineering and Design Student Research

Project management has been exercised from the early stages of history to concurrent practices happening today. It has evolved from the early stages of the Gantt chart and five primary principles to well-renowned project management methodologies such as Waterfall and Agile. This literature review focuses on comprehending four project management methodologies (Waterfall, Agile, Kanban, and Scrum), learning their criteria and frameworks, and learning about their application in a specific STEM environment when applicable. This work reviews the recent research literature pertaining to these four methods. An overview of project management certificates and guidelines is covered as well. Waterfall is known …

Teaching Learning Newsletter Vol 4 Issue 1, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Derivative Propagation Through Vortex Particle Method Simulation, Eric Green, Andrew Ning

Faculty Publications

Automatic differentiation (AD) is a powerful tool for evaluating numerical derivatives. In particular, reverse-mode AD provides numerical gradients in a way that is insensitive to the number of input variables. This makes reverse-mode AD well-suited for solving large optimization problems. However, reverse-mode AD has a particularly large associated memory cost because most intermediate values in operations need to be cached. This is problematic for large problems such as aerodynamics simulations, though, since the memory requirements can quickly become impractical. The solution implemented in this work is to provide analytic pullback expressions for functions for which many of the intermediate values …

Trajectory Optimization Of Evtol And Conventional Aircraft: A Comparative Analysis Of Vortex Particle Method And Vortex Lattice + Blade Element Momentum Theory, Andrew Tagg, Ryan Anderson, Cibin Joseph, Andrew Ning

Faculty Publications

Trajectory optimization of aircraft transition maneuvers can significantly influence the design of these systems, particularly when making decisions about aircraft geometry, propulsion sizing, and control system design. This paper presents the trajectory optimization of air vehicles including electric vertical takeoff and landing (eVTOL) as well as conventional aircraft. The study evaluates the influence of fidelity in trajectory design by comparing the use of two aerodynamic methods in the context of trajectory optimization. The mid-fidelity method utilizes a vortex lattice method (VLM) to model lifting surfaces while employing blade element momentum theory (BEMT) to model rudimentary rotor-wing interactions. The high-fidelity approach …

Ductape: A Steady-State, Axisymmetric Ducted Fan Analysis Code Designed For Gradient-Based Optimization, Judd Mehr, Andrew Ning

Faculty Publications

Electric ducted fans have become an intriguing option for the propulsion systems of clean, quiet advanced air mobility technologies due to their potential benefits in both aerodynamic efficiency and reduced noise profiles compared to open rotor systems. Exploration of conceptual electric ducted fan design in the context of novel, and often complex, applications may be greatly aided by the use of optimization techniques. Specifically, gradient-based optimization lends itself to the exploration of large, complex, multi-disciplinary systems due to its inherent scalability. Despite ducted fans/propellers having been relatively well studied for the last century, modern, gradient-based, optimization-ready analysis tools for ducted …

Design And Development Of A Direct Medium Voltage Solar Pv Resonant Inverter, Parthkumar Sureshkumar Bhuvela

Theses and Dissertations

In a grid-tied photovoltaic (PV) system connected to a medium voltage (MV) grid, an inverter is generally employed with a line frequency transformer (LFT) to connect to the grid. These LFTs are large in size and weight, exhibit high cost and losses. In recent studies, the LFTs replaced by are by (high frequency transformer) HFT embedded in DC-DC converters. These DC-DC converters are used to boost voltage levels and DC-AC inverters are employed for MV inversion. This leads to high frequency switching at MV which increases losses in inversion stage. In this study, a novel MV grid-connected solar PV inverter …

Improving Tcp Performance Using P4-Programmable Data Planes, Jose Antonio Gomez Gaona

Theses and Dissertations

The Transmission Control Protocol (TCP) forms the foundation of reliable end-to-end communication and is widely used by many applications for efficient data transfers across the Internet. TCP relies on various congestion control algorithms (CCAs) to manage its response to network congestion. These algorithms ensure fairness among competing flows and optimize the use of available bandwidth. However, since TCP is deployed within end hosts, its capacity to attain visibility of network events is constrained. This limitation arises from the closed nature of non-programmable network devices, which prevents researchers from exploring customized actions in response to network events. Recently, the emergence of …

Induction Vacuum Swing Adsorption Over Magnetic Sorbent Monoliths And Extrudates For Ethylene/Ethane Separation, Khaled Baamran, Usman Shareef, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

Electrification of adsorption processes is emerging as an adaptable solution for future gas separations. This study develops magnetic sorbent structures for use in induction vacuum swing adsorption (IVSA) process specifically designed for olefin/paraffin separation. Two sorbents, namely Fe₃O₄/ZIF-7 (ethane-selective) and Fe₃O₄/13X (ethylene-selective) were developed and formulated into extrudates (Fe₂₀/ZIF-7-P) and monoliths (Fe₂₀/13X-M), and tested under different regeneration scenarios, including simultaneous and subsequent induction-evacuation, induction only, and evacuation only. The dynamic adsorption results demonstrated that regeneration under subsequent induction-evacuation improves desorption rate and capability. Under this regeneration scenario, Fe …

Integrating Remote Sensing And Machine Learning To Determine Past, Current And Future Crop Water Use From The Nubian Sandstone Aquifer System, Moaz Ishag

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The agriculture sector is a significant consumer of water, and sustainable water use begins with monitoring irrigated land. Delineating irrigated land supports decision-makers and promotes the sustainable use of this crucial resource. This study focuses on the Nubian Sandstone Aquifer System (NSAS), the largest aquifers in the world, which spans Egypt, Sudan, Libya, and Chad. The study aims to: 1) quantify the increase in irrigated hectares (both pivot and non-pivot) from 2000-2001 to 2023-2024; 2) identify major irrigated crop types and their water requirements; and 3) quantify groundwater crop water use from the NSAS using remote sensing via the Google …

Form Pressure Exerted By Concrete For A Large-Scale Structure: Its Quantification And Physicochemical Interpretation, Tae Yong Shin, Seongho Han, Jin Hyun Lee, Jae Hong Kim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Securing safety in formwork is one of the most important tasks to be carried out in the initial stage of construction. The form pressure exerted by fresh concrete needs to be identified, and it should be retained by a formwork system. A design pressure is given in literature and standards, but for large structures its precise prediction is required through a detailed analysis or a mock-up test. This study reports the lateral form pressure distribution generated by fresh concrete through a series of mock-up tests. The tests are designed considering the placement for nuclear containment structures; 3.4 m tall and …

New Method To Calculate Friction Velocity In Smooth Channel Flows Using Direct Numerical Simulation Data, Harshit Mishra, S. Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this paper, we leverage the direct numerical simulation (DNS) data for closed-channel flow for a range of friction Reynolds number (Reτ∼180-5,000) to develop a new one-point friction velocity method (OPFVM) to calculate friction velocity U∗ in terms of free-surface velocity Um, flow depth h, and kinematic viscosity ν. In contrast to prevalent methods that require several cumbersome near boundary measurements to obtain friction velocity, the OPFVM relies on a single easy-to-measure free-surface velocity measurement. The formulation is used to obtain friction velocity for a closed-channel flow (CCF) DNS regime with Reτ=10,049 and on four open-channel flow (OCF) DNS regimes …