Digital Commons Network^™

Designing Enhanced Nonlinearity In Plasmonic Devices With Epsilon-Near-Zero Films, Kevin Tran Le

Electrical Engineering and Computer Science (MS) Theses

The growing demand for energy-efficient optical information processing motivates compact nonlinear photonic devices that can operate at low power. Silicon photonics is a mature platform for linear optical functions, but nonlinear operation remains challenging because of its weak Kerr response, two-photon absorption at telecommunication wavelengths, and limited compatibility with deeply subwavelength plasmonic confinement. This thesis computationally investigates epsilon-near-zero thin films integrated into plasmonic waveguide architectures as a route toward stronger light–matter interaction in compact nonlinear devices.

Two waveguide geometries are examined: a hybrid metal-insulator-metal plasmonic slab waveguide incorporating an ultrathin indium tin oxide epsilon-near-zero layer (5–50 nm), and a dielectric-loaded …

Uav Blast Load Characterization For Structural Design, Jalee Grace Spain

Civil Engineering Undergraduate Honors Theses

As the use of drones, or UAVs, increases, so does the risk of collision with infrastructure. When drones collide with a building, an impact or blast load is applied. Using current literature and structural analysis, a load case can be defined for a blast load induced by a drone.

A Forecasting Framework For Distribution Center Capacity Utilization: An Applied Industry Study, Jordan J. Shortt

Data Science Undergraduate Honors Theses

This project develops and evaluates a predictive modeling framework for forecasting distribution center capacity utilization at Company Y, with monthly forecast horizons up to one year. Motivated by the operational challenges of seasonal demand volatility, promotional cycles, and the absence of a formally defined capacity metric, the study first constructs a historical capacity utilization measure from raw warehouse management system data — reconciling item volumes, location dimensions, and utilization factors across all DCs — which serves as the target variable for all modeling work. Four models are developed and evaluated against a naïve seasonal baseline: SARIMA, LightGBM, LSTM, and a …

Small-Scale Analog Spiking Neural Network: Design And Simulation Of An Analog Deep Neural Network, Lucas Hogue

Electrical Engineering and Computer Science Undergraduate Honors Theses

A small-scale analog schematic of a spiking neural network (SNN) is designed and demonstrated through the analog design environment (ADE) within Cadence Virtuoso. An SNN is a type of neuromorphic system that utilizes components mimicking the function of the neurons and synapses found in biological neural networks. The SNN designed in this project is composed of four layers: one input layer, two hidden layers, and one output layer. The inclusion of more than one hidden layer classifies the network as “deep” and increases the network’s efficiency at handling data with increased complexity. The SNN categorizes inputs by producing a set …

​Autonomous Agentic Orchestration For Physics-Aware Scientific Discovery: An Integrative Multimodal Framework For 2d Material Characterization​, Sankalp Pandey

Electrical Engineering and Computer Science Undergraduate Honors Theses

The advancement of next-generation semiconductor and quantum technologies relies on the scalability of the fabrication of two-dimensional (2D) van der Waals heterostructures. However, this process is severely bottlenecked by characterization workflows. Optical microscopy provides high-throughput imaging of 2D material flakes, but lacks the explicit physical priors required for the discernment of sub-nanometer thickness variations, such as distinguishing monolayers from bilayers. The use of computer vision models to automate the localization and characterization process of the flakes was proposed. As a part of this effort, we develop QuantumFlake, an open-source framework to streamline the integration and deployment of computer vision models …

Bayesian Assembly Tool For Intelligent Digital Twin Selection, Shishir Sharma

All Theses

Digital twins can be used for system performance optimization, health monitoring, predictive maintenance, and investigating system anomalies. A ground vehicle digital twin may be assembled using representations of the subsystem models (tires, suspension system, powertrain, etc.) of different fidelity. Lower fidelity Digital Twins have relatively simpler design and physics, hence are generally computationally less expensive, but may not represent the physical system accurately. On the contrary, higher fidelity Digital Twins are generally more precise in their ability to represent the physical system, but due to complexity, are usually computationally more demanding. This thesis describes the application of Bayesian Classification within …

Implementation Of A Local Llm Serving System For Agentic Ai, Zhiheng Ni

All Theses

This thesis presents a system that allows large AI models to run directly on personal devices instead of relying on cloud servers. Recent advances in artificial intelligence, especially large language models (LLMs), have made it possible to build powerful applications such as chatbots, coding assistants, and intelligent agents. However, most of these systems run in the cloud, which raises concerns about privacy, latency, and cost.

To address these issues, this work develops a local AI serving system that runs efficiently on a specialized hardware component called a Neural Processing Unit (NPU). The system provides a unified interface that supports multiple …

Strengthening Kidney Dialysis One Membrane At A Time: Enhancing Tempo-Oxidized Nanocellulose And Ionic Liquid Membrane Strength Through The Variation Of Cosolvents, Bailey M. Butler

Chemical Engineering Undergraduate Honors Theses

Chronic kidney disease occurs when the kidneys lose the ability to effectively filter the blood, which causes waste build up. End-stage kidney disease (ESKD) is the most severe case of kidney disease and requires either dialysis or a kidney transplant. Hemodialysis, the most common form of dialysis, is an extremely time-intensive and physically burdensome process that is currently limited by membrane performance. The polysulfone (PSf) membranes that are widely used for dialysis today have many limitations, including fouling, toxin rejection, and essential protein loss. Recently, new membranes made from TEMPO-Oxidized nanocellulose dissolved in 1-ethyl-3-methylimidazolium acetate (EMIM-Ac) have shown promising characteristics, …

Physical And Optical Properties Of The Germanium-Arsenic-Selenium Glass Forming Region For Precision Glass Molding And Infrared Optics, Peter F. Wachtel Ii

All Dissertations

The growth and advancement of infrared optical systems for thermal imaging, multi-band imaging, hyperspectral imaging, medical diagnostics, and chemical sensing are pushing the material science community to better understand existing materials while also developing new materials. Additionally, the thermal imaging market continues to grow, and system designers are continually being asked to reduce size, weight, and power while reducing costs (SWaP-c). Market growth has shifted optics manufacturing towards higher volume processes such as precision glass molding, but this does require most materials to be recharacterized due to property changes resulting from the process. Affecting the SWaP-c requirements, manufacturing tolerances are …

Adsorption Of Pfas On Bridged Functionalized Organosilica Materials, Elisha Lawerh Kabutey

Electronic Theses and Dissertations

PFAS are hazardous contaminants that have a devastating impact on human health and the environment. Their hazardous nature has led to the development of various adsorption methods for removing these contaminants from water sources. In this study, functionalized organosilica materials were synthesized from bis[3-(trimethoxysilyl)propyl] amine using the sol-gel method. The surface amino groups of the organosilica were converted into amine hydrochloride groups. Their adsorption properties were evaluated using salts of perfluorooctanoic acid, perfluorooctanesulfonic acid, and perfluorobutanesulfonic acid. Results showed excellent adsorption capacity of the materials. Adsorption of PFAS leads to particle agglomeration and flotation of the spent material. A column …

Calibration Refinement Of Aashto Paveme For Kentucky Asphalt Overlays, Clayton S. Cook, Kean H. Ashurst Jr., Clark Graves

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC) uses AASHTOWare’s Pavement ME Design Version 3.0 (PaveME) to develop mechanistic-empirical designs for new and reconstructed pavements. Transfer functions used for estimating pavement distress in PaveME rely on national calibration values derived from the Long-Term Pavement Performance (LTPP) database. However, these often fail to reflect Kentucky’s local conditions, materials, and practices. To address this issue, Kentucky Transportation Center (KTC) researchers completed local calibrations for several key transfer functions (rutting, reflective fatigue cracking, and roughness (IRI)) to improve the predictive accuracy of and reduce bias in pavement performance models developed for rehabilitation projects that involve placing …

Effects Of A Passive Assistive Hamstring Device On Overground Running Kinematics And Hamstring Activation., Quinn Castner

All Theses

Hamstring strain injuries are among the most common and recurring injuries in sports, occurring most often during the terminal swing phase of gait. Despite progress in rehabilitation, the incidence of injury has only increased, suggesting a need for a novel intervention. We designed a passive, assistive, wearable device with two specific criteria in mind: to offload the hamstrings during running, and do so without hindering normal kinematic patterns. The device consists of an adjustable elastic band anchored proximally at the waist and distally just above the ankle joint center. It stretches and shortens with the hamstrings, providing passive hip extension …

Robustness Of Vision Language Models For Pedestrian Detection Tasks, Ostonya K. Thomas

All Theses

Autonomous vehicle (AV) systems typically employ modular systems in which discrete components handle separate tasks such as perception, computation, and path planning. While flexible, this approach allows errors to propagate and compound across the pipeline, and many AI systems offer little transparency into their internal decision-making. Such limitations are particularly concerning in safety-critical domains where failures can carry lethal consequences. Vision Language Models (VLMs) have emerged as a promising alternative because they support end-to-end implementations that bypass compounding error risks and provide natural language explanations of their outputs. Despite these advantages, prior research has demonstrated that both computer vision systems …

Fatigue And Cyclic Loading In Aircraft Engine Turbomachinery, Sarah Hilliard

Senior Honors Theses

The fatigue and cyclic loading of aircraft engine turbomachinery was explored in order to better understand and predict its failure. This exploration included a review of central topics such as aircraft engine components, fatigue, and the microstructural nature of metal. Also, the ANSYS Mechanical microstructural crystal plasticity tool was evaluated for its utility in fatigue prediction studies. No validation of the tool in question was possible within the scope of this thesis. Numerical fatigue life prediction methods were discussed, and current advancements in metal coatings and surface treatments for prolonging the life of certain superalloys were investigated. Further work in …

Analyzing The Writing Style Of Generative Ai When Prompted With Writing Samples, Samuel Mcdowell

Senior Honors Theses

Authorship attribution is an important topic in today’s world of Large Language Models (LLMs). It is the technology that helps to verify the author of a written work. This study explores whether LLMs can successfully mimic an individual’s writing style if they are given a text sample. A dataset of human-written texts was collected and used to prompt several LLMs to generate new texts that attempt to replicate the original author’s stylistic characteristics. The generated texts were then tested with modern authorship attribution models to determine whether they would be identified as being written by the original author. The results …

Dor-E: Final Design Report, Arav Singh, August Hogen-Esch, Bruce Le, Patrick Mcgee, Spencer Major

Mechanical Engineering

I. PROBLEM STATEMENT

The Chumash Heritage National Marine Sanctuary contains a diverse array of benthic habitats that remain largely undocumented due to the financial and logistical barriers of deep-sea exploration. Traditional high-end autonomous underwater vehicles and remotely operated vehicles capable of reaching 1000-meter depths require significant surface support infrastructure and hundreds of thousands of dollars in funding. Furthermore, navigating protected ecological zones demands strict adherence to "Leave No Trace" principles. Conventional benthic landers and submersibles routinely leave metallic debris behind; many submersibles use galvanic timed releases that corrode in seawater over a set period of time or heat-activated bolts to …

Boron Nitride Nanotubes Assist The Self-Assembly Of Spherical Cholesteric Liquid Crystal Shells Of Cellulose Nanocrystals In Water, Tanner L. Larson, Brandon J. Heppe, Benjamin S. Flavel, Ralph Krupke, Geyou Ao

Chemical & Biomedical Engineering Faculty Publications

Spherical confinement of cholesteric liquid crystal (ChLC) droplets is emerging as an intriguing approach for achieving complex ordered structures for photonic applications and beyond. Previously, this has been achieved primarily through microfluidic assembly utilizing immiscible solvents or immiscible mesogen-solvent systems, such as oil-water or thermotropic liquid crystal-water systems, respectively. Here, we show the spontaneous assembly of spherical ChLC droplets with isotropic cores from lyotropic liquid crystals of mixed nanorods containing boron nitride nanotubes (BNNTs) and cellulose nanocrystals (CNCs) in all-aqueous environments. We show that the mixing of as low as 0.094 vol % of pectin-coated BNNTs with isotropic dispersions of …

Harness: Hybrid Architecture For Resilience In Networked Engineering System Simulations, Daniel Scott

Graduate Theses and Dissertations

This dissertation presents the development of HARNESS, a unified, domain-agnostic framework for the modeling, optimization, and evaluation of complex systems under conditions of degradation and uncertainty. The research addresses a persistent challenge in systems engineering: the lack of a generalizable, behaviorally grounded approach for quantifying resilience and robustness across diverse domains. HARNESS integrates graph-theoretic dependency modeling, GPU-accelerated evolutionary optimization, and agent-based simulation into a modular architecture that enables both system design and diagnostic analysis. The framework models system interdependencies through user-defined components, parameters, and constraints, allowing architectures to evolve dynamically while maintaining structural validity. A mutation-only genetic algorithm with a …

An Energy- And Area- Efficient Two-Stage Latch Comparator Using Common-Mode Reset, Larry Yu

Electrical Engineering Theses and Dissertations

This thesis presents an energy-and-area-efficient two-stage comparator implemented in TSMC 65 nm CMOS that incorporates a Floating Inverter Amplifier (FIA) followed by a latch using a common-mode reset scheme. The FIA improves input sensitivity and reduces kickback noise by isolating the input nodes from large latch voltage swings. The proposed latch resets its output nodes to a common-mode voltage rather than one of its supply rails, thereby reducing switching energy during the reset phase. The comparator can resolve differential input voltages as small as 2 mV with a clock period of 500 ps, achieving 74.33 μV input-referred noise while consuming …

Optimization Of The Baffle Geometry Of A Circular Culvert Outlet Structure To Maximize Energy Dissipation, Kiarash Shirmahi

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

High-velocity flow at culvert outlets can lead to significant soil erosion and damage to downstream infrastructure, particularly in agricultural regions where land protection is critical. Circular culverts, commonly used in transportation systems, are especially susceptible to this issue due to flow acceleration caused by geometric constraints and installation angles. Despite extensive research on energy dissipation in rectangular culverts, limited attention has been given to circular configurations. This study addresses this gap by evaluating the hydraulic performance of baffle systems designed to reduce outlet energy in circular culverts.

A series of laboratory experiments was conducted using a scaled physical model of …

Salt-Dependent Purification Of Green Fluorescent Protein Via Hydrophobic Interaction Chromatography, Katie L. Collins

Honors Theses

Green fluorescent protein, GFP, is a widely used fluorescent reporter, and its purification provides a clear model for studying downstream bioprocessing. This thesis investigates how binding-buffer salt strength affects GFP retention and elution during hydrophobic interaction chromatography, HIC, by comparing three conditions (1.0×, 0.8×, and 0.6×). GFP-expressing E. coli were lysed and clarified, and the lysate was purified on HIC columns; collected fractions were evaluated qualitatively under UV illumination to track fluorescence distribution. Results showed a salt-dependent trend in which higher salt improved retention and shifted fluorescence toward later elution fractions, while reduced salt weakened hydrophobic interactions and increased earlier …

Development Of Low-Cost Triaxial Force Sensor For Measurement Of Human-Exoskeleton Interaction Forces, Hamdan Khan Sarvathullah

All Theses

Contemporary research suggests that shear force is a major contributor to discomfort and pressure injury. However, the variation of shear forces during human-exoskeleton interaction dynamics is a highly unexplored field. The high cost of commercial triaxial force sensors may be a major factor in the notable lack of research in this field. Therefore, in this paper, we present a low-cost, 3D-printed triaxial force sensor designed specifically to measure the triaxial interaction forces between an exoskeleton and its user. The triaxial force sensor uses Carbon-Black/Silicone Rubber (CB/SR) strings to measure shear forces, whereas the normal force is measured with a Force …

Estimation Of The Mechanical Properties Of South Carolina Timber Piles Using Non-Destructive Evaluation Methods And Experimentally-Informed Models, Aashish Sapkota

All Theses

South Carolina has about 2,600 bridges that are supported by nearly 75,000 timber piles. They are increasingly vulnerable to biological decay, cracking and impact damages after decades of service. Current inspection methods used by the South Carolina Department of Transportation (SCDOT), such as hammer sounding and awl probing, are labor-intensive and expensive. This study investigated non-destructive evaluation (NDE) methods, including micro-resistance drilling and stress wave timing, as alternatives for assessing timber pile condition.

Ten timber piles were collected from two South Carolina bridges, and their above-grade portions were cut into 40 specimens approximately 13 to 15 inches long. Specimens were …

Fluorescence-Based Quantification Of Hepatic Ldl Uptake And Donor Hepatocyte Engraftment Using Atto 700–Labeled Ldl, Victor Agustin Cortes Flores

All Theses

Familial hypercholesterolemia (FH) is an inherited disorder characterized by elevated low-density lipoprotein cholesterol (LDL-C) that increases the risk of premature atherosclerotic cardiovascular disease. In severe FH, including low-density lipoprotein receptor (LDLR), hepatic LDL clearance is profoundly impaired and many lipid lowering treatment strategies have limited effectiveness. Current advances in ex vivo CRISPR–Cas9 hepatocyte gene editing in vivo and ex vivo approaches for treatment of FH are under development.

However, a central barrier to translation is the ability to quantitatively measure the percentage of healthy gen edited hepatocytes in the liver while simultaneously assessing functional hepatic LDL handling. This thesis establishes …

Design And Verification Of The Multi-Slit Solar Explorer Camera Field Programmable Gate Arrays, Jordan M. Johnson

All Graduate Reports and Creative Projects, Fall 2023 to Present

The Multi-Slit Solar Explorer, or MUSE, is a NASA mission that will take images of the Sun to study solar flares and the solar corona. The mission will provide insight into the mechanisms behind space weather. The mission consists of two cameras: the Spectrograph (SG), and the Context Imager (CI). The Utah State University Space Dynamics Laboratory is providing both cameras for the mission.

This report describes a part of the design and verification process for a central component on these cameras known as the Field Programmable Gate Arrays (FPGAs). These FPGAs are programmed to acquire, handle, and send images …

An Evaluation Of Leading Indicators In The Construction Industry And Their Relationship With Incident Rates, Kitti Miller Whalen

All-Inclusive List of Electronic Theses and Dissertations

Improving safety programs has been a focus of organizations for decades. Historically, focus has been directed towards lagging indicators such as recordable incident rates and experience modification rate (EMR). While these remain beneficial, they are only one component of the broader framework. In recent years, companies have started to examine what occurs prior to an incident, which are known as leading indicators. The research into leading indicators is promising, however research into the area is limited. The focus of this study is to identify which leading indicators are most strongly associated with improved incident rates in the construction industry specifically. …

Ai-Assisted Frame Selection For Sports Photography Using Computer Vision And Multi-Modal Image Metrics, Sahana Ganesh

Honors Scholar Theses

This project focuses on the design and development of an AI-assisted frame selection system that automatically analyzes sequences of sports images and ranks frames based on overall photographic and contextual value. Additionally, we will focus on providing insights into the Computer Vision and Artificial Intelligence techniques used to build it.

The application utilizes computer vision and machine learning techniques to evaluate multiple dimensions of image quality and content. These include technical image quality metrics such as sharpness, motion blur, and exposure; compositional metrics such as subject placement and visual balance; and semantic understanding through detection of players, ball location, pose, …

Autonomous Deficiency Detection And Vision-Language Summarization For Underground Infrastructure On Embedded Edge Systems, Johny Lopez

LSU New Orleans Theses and Dissertations

Aging underground infrastructure poses significant risks to public health and environmental safety, yet structural condition assessment remains bottlenecked by labor-intensive manual CCTV inspections. This thesis proposes a comprehensive algorithmic framework enabling fully autonomous, real-time deficiency detection, geometric assessment, and natural language reporting on resource- constrained edge computing platforms. Three core components address this challenge. First, RAPID-SCAN, a novel semantic segmentation architecture utilizing a Dynamic Feature Pyramid Network and Channel-Spatial Attention, achieves real-time, pixel-precise defect localization with dramatically reduced parameters. Second, an Edge-Optimized Vision-Language Model pipeline employing LoRA and 4-bit QLoRA quantization compresses Phi-3.5 for local deployment, en- abling autonomous technical …

Effect Of Composition On Grain-Boundary Chemistry And Fracture Behavior In High-Entropy Carbides, Caleb Schenck, Marium Mostafiz Mou, Elizabeth Pritchett, Fu Yun Tsai, Josephine Hartmann, Michael Lastovich, Sam Daigle, Kayla Yano, Matthew J. Olszta, Sanjit Bhowick, Elizabeth Kautz, Gregory E. Hilmas, William G. Fahrenholtz, Donald W. Brenner

Materials Science and Engineering Faculty Research & Creative Works

High-entropy carbides (HECs) are often treated as a single material class defined by configurational entropy; however, their properties are governed by composition-specific defects and grain-boundary chemistry. This study demonstrates that substituting a single element can qualitatively change grain-boundary structure and fracture behavior in HEC ceramics. Two HECs, (Cr,Hf,Ta,Ti,Zr)C (HEC-Cr) and (Hf,Ta,Ti,W,Zr)C (HEC-W), were examined via electron microscopy, atom probe tomography, and molecular dynamics simulations. Simulations predict preferential segregation of Cr, W, and Zr to grain boundaries. Experiments confirmed Cr enrichment at grain boundaries and the formation of W-rich nanograins along boundary networks. Mechanical testing revealed that these compositional differences translated …

Evaluating The Integration Of Bio-Based Waste Into Cement Production: A Pathway To Sustainable Building, Anja Terzić, Suzana Filipović, Adriana Peleš Tadić, Jelena Živojinović, Ivana N. Jelić, Nina Obradović, William G. Fahrenholtz

Materials Science and Engineering Faculty Research & Creative Works

Rapid urbanization has increased the demand for building materials, depleting natural resources used in cement production and prompting the use of alternative and waste materials. This research verifies that eggshell powder waste can fully replace limestone in clinker synthesis. Five clinkers were produced using eggshell powder, aluminum sources (bentonite, zeolite, fly ash, and kaolinitic–illitic clay), Fe-slag, and quartz sand, with mechanical preprocessing (10–30 min) before sintering at 1300 °C. Experimental tests assessed the effects of mix design and mechanical activation on clinkerization, phase formation, temperature, and mechanical properties. XRD, FTIR, and SEM/EDS confirmed consistent phase compositions and primary cement minerals. …