Digital Commons Network^™

Pet Mobility Project, John Shelby, Lily-Rose Jolie Bacon, Andrea Yasmine Reyes

Biomedical Engineering

The Pet Mobility Project, sponsored by Terri Smith and Jasper Jackson, is an initiative aimed at providing a custom mobility aid to a pet in the San Luis Obispo community. Amber Rappozo’s young German Shepherd, LeDoux, was selected as the project’s recipient. LeDoux suffers from hindleg weakness and, as a result, has limited mobility. This document provides a comprehensive overview of the Pet Mobility Project, detailing the motivation, background, and design approach behind the development of a LeDoux’s custom mobility aid.

Cardiac Twitch Force Measurement System, Tara Hoffman, Sebastian Carrascal Gómez, Julian Macdonald

Biomedical Engineering

The goal of this project is to develop a low-cost and accurate force measurement system and method of measurement to be used in the testing of grown cardiac tissue samples. The primary stakeholder in this project is Dr. Luke Perreault, a biomedical engineering professor at California Polytechnic State University San Luis Obispo who is studying grown cardiac tissue rings, and any of his student lab personnel. Other stakeholders include other researchers in the tissue engineering field who require a similar form of testing to the methods developed in this project.

This document will introduce the identified problem and background as …

Autonomous Vision-Based Litter Collection Rover, Dante Michael Benedetti, Benjamin Scott Tavares, Nathan Heil

Electrical Engineering

This report documents the design, implementation, and testing of an autonomous litter-collection rover developed as a Senior Project Design Lab (EE 460/463/464) at California Polytechnic State University. The rover integrates autonomy, computer vision, embedded real-time control, mecanum-wheel omnidirectional mobility, and a two-degree-of-freedom robotic arm to detect, approach, and collect small ground-level litter such as bottles, wrappers, and paper fragments.

The system uses a two-layer compute architecture: an NVIDIA Jetson Orin Nano running ROS 2 for perception, SLAM, and path planning, paired with an STM32L4A6ZG microcontroller for real-time motor control and odometry. The robot is built on a multi-level aluminum frame …

Pcb Design For Place Cells Vlsi Chip, Gavin Reaksecker, Alex Krier, Joshua Lin

Electrical Engineering

This project presents the design and implementation of a 2 layer test-bench printed circuit board (PCB) for evaluating the functionality of a custom 40-pin VLSI integrated circuit. The objective is to create a reliable and portable platform capable of supplying configurable bias voltages, generating variable input signals, and monitoring both analog and digital outputs. The board integrates adjustable bias networks using potentiometers, digital and analog buffering stages, and optional battery supply operation. The VLSI device under test is mounted in dual-in-line (DIP) sockets to enable rapid replacement and repeated characterization. Dedicated test points are incorporated throughout the PCB to facilitate …

Solving Linearly Constrained Quadratic Programs Using Field Programmable Analog Arrays, Tyler Wynn, Alonzo Arroyo

Electrical Engineering

This paper presents a field-programmable analog array (FPAA) implementation for solving linearly constrained quadratic programs (LCQPs) directly in the analog domain. The solver is based on a continuous-time primal-dual control architecture with integral action, anti-windup compensation, and a piecewise-linear nonlinearity for enforcing affine inequality constraints. A switched-capacitor implementation using three AN231E04 FPAAs is developed, and coefficient scaling methods are introduced to keep internal and output signals within the voltage limits of the hardware. A global scaling factor is used to reduce internal signal excursions, while solution-space scaling is shown to modify the implemented optimization coefficients and alter the local closed-loop …

Autonomous Rover Solar And Battery Management System: Team B, Karla Jazmin Lira Gonzalez, Paige Ambriz, Kunj Shah, Elhom Delasa Sheykhi

Electrical Engineering

This project focused on the software and printed circuit board (PCB) integration for Poly1Rover’s battery management system (BMS). Poly1Rover is a student organization dedicated to building a low-cost autonomous rover designed to operate on Mars. Since solar availability, temperature, and other conditions on Mars vary, the rover requires a reliable battery management system that accurately monitors battery health and status. This team’s work included the communication and control side of the BMS. The subsystem was designed around the Renesas ISL94202 battery monitor and the MSP430 controller. Battery information was read from the ISL94202 registers through I2C communication, converted from raw …

Table Tennis Training Instrument (Ping Pongers), Derick Alvarado, Peter Sandberg, Andrew Wong

Mechanical Engineering Senior Theses

Table Tennis is an extremely popular sport worldwide, boasting an extensive market. However, it is a sport that generally requires other people to both play and practice with. The goal of this project was to create a machine that would serve table tennis balls for the purpose of individual practice. The machine was meant to fill the niche that other machines of the same type filled by allowing individuals to practice on their own without the assistance of another player or a coach. The main goal of the project was to offer a market competitive device, sharing the same basic …

Camless Valve Engine, Berkeley Burbank, James Thomas Daniel, Haydn Fischer, Nicos Katigbak, John Holden Kleiner, Martin Raabe

Mechanical Engineering Senior Theses

This project focuses on the design and validation of a camless engine valve system as an  alternative to traditional camshaft-based valvetrain architectures. Conventional engines rely on  fixed camshaft profiles that limit performance and efficiency across varying operating  conditions. The goal of this work is to replace both the camshaft and throttle body with a  pneumatically actuated system capable of independently controlling valve timing, lift, and  duration in real time. By removing the mechanical constraints of a camshaft, the system has the  potential to optimize engine operation across all RPM ranges, improving efficiency and overall  performance without requiring major changes to …

Hospital Bed Tray Table, Ava Mikeska, Sara Chamness, Samantha Kenney, Kaitlyn Ould

Mechanical Engineering

This project documents the design and development of a collapsible hospital bed tray table created through the Mechanical Engineering Senior Project program at Cal Poly, San Luis Obispo. The goal of the project was to reduce the floor space occupied by existing overbed tray tables while preserving the functionality, stability, and durability expected by patients, visitors, and healthcare staff.

The final design modifies a commercially available overbed tray table by incorporating a folding tabletop hinge mechanism and a telescoping base. The hinge allows the tabletop to lock in both the upright and stowed positions, while the telescoping base retracts to …

Thermosiphon Lab Experiment, Ella C. Perry, Zach Barry, Madison K. Felton, Lane A. Hunter

Mechanical Engineering

The Cal Poly Mechanical Engineering Department aims to develop a new lab centered on a thermosiphon solar system. This lab will introduce the operating principles of thermosiphons while integrating concepts from heat transfer, fluid dynamics, and thermodynamics. A thermosiphon functions by heating water using thermal energy. The lab will examine the efficiency of this energy transfer. The final lab will be tailored to enhance student learning while ensuring ease of use for the Mechanical Engineering Department.

Semi-Automated Wine Barrel Filler, Elliot Jason Dejong, Carlo Caesare Deianni, Brady Emerson J. Leib

Mechanical Engineering

The proposed project is a semi-automated wine barrel filler. Currently, there is no streamlined and affordable method for smaller wineries to fill wine barrels without dedicating complete focus to the task. The primary use is controlled filling for white wine fermentation, during which an air gap must be left in the barrel to allow for expansion of the wine during fermentation. Tom Greenough, Saucelito Canyon’s head winemaker, and associate winemaker Bodie Ringhofer are the primary stakeholders in our project and want to consistently fill barrels at their winery to a fluid volume of approximately 50 gallons each. This project serves …

Smart Sleeve, Evan Abalos, Bright Jung, Owen Bowling, Wyatt Eberhart

Mechanical Engineering

Quantifying human arm muscle activity is essential for understanding human movements and helping individuals who suffer from motor or neurological impairments such as stroke or traumatic brain injuries. Today, these individuals, as well as clinicians, researchers, and athletes, face many challenges when using the traditional surface electromyography (sEMG) systems to monitor muscle activities, including complex setup, restricted mobility, discomfort, inconsistent placement of electrodes, and lack of accuracy. Therefore, a comfortable EMG sleeve device that accurately measures arm movement without interfering with daily tasks is needed, which the team will be designing, manufacturing, and testing as their senior project. In addition, …

Me Department Bespoke Coffee Cabinet, Mickie Clyne, Stephen Tamacheepjaroen, Samuel Johnson, Willem Gray

Mechanical Engineering

This senior project involved the design, fabrication, and testing of a custom coffee cabinet for the California Polytechnic State University Mechanical Engineering Department. The project addressed challenges associated with appliance organization, storage efficiency, accessibility, and maintenance within the department’s shared breakroom space. A human-centered design process was used to identify stakeholder needs and develop engineering specifications for the final product.

The completed cabinet integrates custom woodworking, steel pipe frame construction, dedicated K-Cup storage, organized appliance placement, and a rack-and-pinion sliding platform that improves access to the Keurig coffee maker for refilling and maintenance. Design decisions were informed through stakeholder feedback, …

Process Improvement For Thermal Barrier Coating Masking Applications, Katherine Meezan, Aiden Senn, Saksham Giri, Katelyn Perez

Mechanical Engineering

Solar Turbines, a gas turbine manufacturer, needs a more efficient method to prevent the application of a thermal barrier coating (TBC) to select areas of their combustion liners during manufacturing. Currently, the process is labor, material, and time intensive: reusable masking tools should increase the efficiency of the TBC process.

This project is sponsored in full by Solar Turbines, and is under the guidance and administration of three Solar Turbines engineers: Chris Noone, Rick Rogers, and Carson Roff. The project is mentored by Cal Poly senior design Coach, Rick Lasko. This project will be completed by a team of four …

Me3328 Combined Loading Beam Bending Lab, Alejandro Islas, Viswesh Vancheeswaran, Owen Spencer, Henry Andrews

Mechanical Engineering

Serving as a new laboratory experiment for ME 3328 (Design for Strength & Stiffness), strain gauges were adhered, wired, and calibrated on a cantilever beam lab apparatus capable of undergoing pure bending, pure torsion, and combined bending.

Design And Evaluation Of An Open-Source Ac/Dc Power Converter For Microgrid Applications, Ryan J. Rayos

Master's Theses

This thesis presents the design, implementation, and evaluation of an open-source bidirectional power conversion platform intended for microgrid applications. As distributed energy resources, battery storage systems, and hybrid AC/DC architectures continue to increase in adoption, there is a growing demand for flexible, low-cost, and programmable power electronic platforms capable of interfacing between DC and AC subsystems. Existing commercial solutions are often proprietary and expensive, limiting their accessibility for educational, research, and rapid prototyping applications. This work expands upon the existing open-source Atinverter platform by increasing its operating voltage capability, integrating bidirectional power flow, and implementing telemetry systems suitable for microgrid …

Integration Of Robotic Arm And Conveyor With Programmable Logic Controller, Drake A. Small

Master's Theses

To meet new curriculum demands brought on by Cal Poly's upcoming switch to semesters, a new, cross-disciplinary lab module was developed for EE 435 (Industrial Power Control and Automation). The module emphasizes career-applicable skills, preparing students for the field of controls engineering within the manufacturing industry. These skills include robotic control, computer networking and configuration, and embedded systems. The work focused on integrating a collaborative robot arm to pick-and-place boxes on a conveyor. A myCobot 320 Pi and an Ultimation Powered Roller MDR Conveyor were integrated with the existing PLC system using Modbus RTU and EtherNet/IP communication protocols, respectively. A …

Effects Of Atmospheric Drag On Angles-Only Initial Relative Orbit Determination Accuracy In Low Earth Orbit, Sydney Walsh

Master's Theses

Growing congestion in low Earth orbit is increasing the demand for effective space situational awareness, straining ground station capabilities. Space-based relative orbit determination offers an alternative, using line-of-sight angle measurements from a chaser spacecraft to estimate a target spacecraft's orbit. This research focuses on angles-only initial relative orbit determination (IROD), where no prior target state knowledge is assumed. It investigates how IROD solution accuracy is affected by differential atmospheric drag between the chaser and target spacecraft. A nonlinear batch least squares filter is designed to estimate the target's initial state, which is compared against a truth solution. It was found …

Teaching Multi-Core Architecture: Design And Implementation Of A Cache-Coherent Cpu For Undergraduate Education, Isaac R. Lake

Master's Theses

Modern computing has relied on multicore processors for high performance for nearly two decades, yet undergraduate computer engineering curricula often provide limited exposure to parallel hardware architectures and their design challenges. This thesis presents the design of CPE 433, a course that extends the pipelined and cached OTTER CPU developed in CPE 233 and CPE 333 into a multicore processor capable of running parallel workloads. The thesis documents the architectural changes required to adapt the verified single-core design into a multicore system, including MMIO-based interrupt support, a shared cache hierarchy with cache-coherence mechanisms, and clock-gated modules. It further presents a …

Implementation Of A Line-Scan Camera Triangulation Sensor For A Ball Balancer, Jackson R. Mclaughlin

Master's Theses

Ball Balancer or Ball on Plate systems are used for education and research in control theory. These consist of a plate which can be actively tilted, with a ball rolling on the surface. Students are challenged to model the dynamics of the system and implement a control loop which is capable of stabilizing the ball by actuating the plate.  The mechatronics group at Cal Poly is developing hardware for one of these ball-balancer systems, for future use in the Mechanical Engineering curriculum.

The position of the ball relative to the plate must be measured in order to control and stabilize …

Boundary Influence In Truncated Groundwater Models: Reconstructing A Local-Scale Modflow Model From A Consultant-Developed Regional Model In The Monterey Subbasin, Bruce K. Liscomb

Master's Theses

Regional groundwater models built by consultants contain valuable calibrated frameworks but are often too large and complex for repeated local-scale analysis. Rather than rebuilding an entirely new smaller model, this study truncates the existing consultant-built regional model of the Monterey Subbasin, preserving the original grid structure and parameter framework while reducing the active domain to a manageable size for planning-level use. A key finding is that boundary-condition representation exerted a dominant influence on simulated groundwater behavior within the truncated domain, highlighting that truncation is a structural decision that meaningfully affects how the model responds. Model performance was evaluated two ways. …

A Performance-Weighted Environmental Assessment Of Ultra-High-Volume Fly Ash Substitution In Portland Cement Concrete, Youngguk Seo, M.A. Karim, Teddy Tzvetkov, Joshua Hardy

Faculty Articles

Fly ash substitution for cement in Portland cement concrete (PCC) has been regarded as a sustainable solution, but its widespread application remains constrained by concerns over mechanical performance and durability of PCC, especially at higher replacement rates. This study evaluates PCC mixes incorporating fly ash Type C (FA-C) or Type F (FA-F) across cement replacement rates from 10% to 90%, tracking fresh-state workability, compressive strength, and surface electrical resistivity at 7, 14, and 28 curing days. A process-based life cycle assessment (LCA) with the TRACI 2.1 method quantified global warming potential (GWP, kg CO₂/m³) under a …

The Effects Of Carbon-Fiber Plates And Peba-Based Midsole Foam In Running Shoes On Lower-Limb Joint Kinetics And Kinematics In Recreational Female Runners, Jordan M. Allen

Master's Theses

The recent increase in long-distance running participation and the rapid advancement in footwear technology have created a need for research on injury prevention in this growing population of recreational runners. When “super shoes” were first introduced to the running scene, they caught the attention of runners worldwide with the rapid improvement in marathon performance [1]. Today, every major running brand offers its own version of a super shoe, each incorporating a carbon-fiber plate and PEBA-based midsole foam. While previous studies have shown the performance benefits of these shoes, a gap remains in the literature regarding how they impact knee, hip, …

Simulation Of Powder Spreading For Metal Additive Manufacturing, Florence Duff

Master's Theses

The powder recoating process for Laser Powder Bed Fusion requires iterative experimentation to develop the correct process parameters that will result in high quality parts. There currently lacks good spread quality metrics and models for optimizing spread quality. A machine that simulates the powder spreading process was built to streamline the process of selecting process parameters for specific types of powders without having to operate the full laser system. The parameters investigated were the layer thickness and spreading speed. The response variables were metrics developed to assess spread quality: the percentage of the build plate covered by powder and the …

Reinforced Concrete Design Fundamentals, Belen Stephanie Martinez Espinoza, Estevan Jacob Perez

Architectural Engineering

Hispanic workers make up a large and growing portion of the construction workforce in the United States; particularly in California, the percentage of construction workers who are Hispanic is estimated to be about 55% as of 2021 (Elkins). Many of these workers are Spanish-speaking, yet there is still a gap between technical engineering design and what is understood and applied in the field. One major reason for this gap is the lack of clear bilingual resources. To bridge the gap, a 48-page bilingual booklet titled Reinforced Concrete Design Fundamentals (Fundamentos del Diseño de Concreto Reforzado in Spanish) was created. This …

Tanzania Mbesese Initiative 2026, June Ezzell, Sam Liebman, Noah Beyer, Kate Hamilton, Luke Vollert, Kylee Borgen, Cody Balazs, Meg Mclaughlin

Architectural Engineering

The Tanzania Mbesese Initiative 2026 Senior Project supports a multi-year design-build effort to establish the Same Polytechnic College in Same, Tanzania. This community faces high poverty levels and limited access to higher education, necessitating sustainable infrastructure to support tertiary education. To prepare for the upcoming July phase of construction, an eight-student Architectural Engineering team designed three practical and resilient structures: a Shade Structure, a Water Collection Structure, and a Reusable Scaffolding system. The final design applied structural analysis, modeling, and hand-tool fabrication practice to balance material efficiency with long-term structural durability. The deliverables provide comprehensive construction documentation, complete material takeoffs, …

Design And Implementation Of A Honeycomb Damping System For The 2026 Eeri Seismic Design Competition, Vera Nguyen, Lauryn Wojcik

Architectural Engineering

The authors of this report were a part of the 2026 Earthquake Engineering Research Institute (EERI) chapter at California Polytechnic State University, San Luis Obispo. In July 2026, they will travel to Portland, Oregon with 12 students to compete in the Undergraduate Seismic Design Competition hosted by EERI. The competition required teams to develop a comprehensive structural design proposal that included computer-based modeling and analysis, construction of three physical models, and the preparation of both a technical poster and oral presentation for a proposed high-rise building located in Portland, Oregon. Cal Poly’s “Illahee Tower” was designed with an emphasis on …

Effects Of Overcorrection On Mitigating Uncontrolled Tipping During Incisor Retraction Using Clear Aligners: Finite Element Analysis And In Vitro Experiment, Jianing Wang, Niko Burger, Bo Wang, Linxia Gu, Pengfei Dong

Biomedical Engineering Faculty Research and Publications

Uncontrolled tipping during incisor retraction with clear aligners continues to limit orthodontic treatment. Different countermeasures have been proposed to improve the predictability of aligners, such as power ridges and attachments, while their efficacy requires further investigation. This work investigated the biomechanics of the overcorrection in reducing the tipping angle and moment during incisor retraction with a clear aligner, through in vitro experiments and finite element analysis (FEA). Specifically, the influence of overcorrection angle (1 deg), retraction distance (0.15 mm), and the combination of both were assessed through in vitro experiments and the finite element simulation. Further computational simulations were conducted …

Evaluation Of Laser Doppler Flowmetry And Transillumination Laser Speckle Contrast Imaging To Measure Blood Flow Change In Ischemia Mouse Hindlimb Models, Simon Park

Master's Theses

Peripheral Artery Disease (PAD), caused by plaque buildup and narrowing of the arteries, reduces blood flow to the extremities. Promoting collateral arteriogenesis can help redirect blood flow. However, simple growth of collaterals may not be enough to reverse PAD. Instead, the ability for the collaterals to vasodilate and control blood flow is important, meaning assessing collateral function is important for the arteriogenesis assesment. Although microscopy techniques can measure vasodilation, contrast limitations in larger vessels such as collaterals make blood flow measurements difficult. Techniques such as ultrasound or magnetic resonance imaging (MRI) can measure blood flow but have limitations with cost …

Polysaber: A Custom Reactive Lightsaber Soundboard, Pedro B. Medeiros

Computer Engineering

The PolySaber project was developed as a custom reactive lightsaber control system built as a fully custom PCB design. The purpose of the project was to create a lower-cost and more customizable alternative to commercially available lightsaber soundboards while simultaneously providing hands-on experience in PCB design, embedded systems development, and hardware integration. Commercial lightsaber soundboards are expensive, proprietary, and difficult for hobbyists to customize. The PolySaber project addresses this by creating a modifiable hardware platform built around the ESP32 microcontroller. The system supports programmable firmware, RGB NeoPixel blade control, motion sensing, reactive swing and clash effects, onboard audio amplification, and …