Digital Commons Network^™

Optimisation Of Stepped Basin Solar Still With Response Surface Methodology And Machine Learning Methods, M. Balamurugan, V. Santhanam, B. Deepanraj, S. P Manikandan, M. Yuvaperiyasamy, N. Senthilkumar

Mansoura Engineering Journal

This research focuses on enhancing the distillate output of a stepped basin solar still by optimizing key operational variables using Response Surface Methodology (RSM) and advanced machine learning techniques. As water scarcity remains a critical global challenge, solar stills offer a viable, sustainable solution for desalination. These systems offer an energy-efficient approach to converting saline water intofreshwater, providing an alternative to conventional desalination methods. The primary objective was to investigate how variations in solar radiation, step height, and water inlet temperature influence the productivity of the stepped basin solar still. The solar radiation ranged from 600 to 1000 W/m², the …

Pafex: Compiler-Based Floating-Point Exception Detection For Gpu Kernels With Papispecific Software-Defined Events, Samin Islam, Shirley V. Moore, Christoph Q. Lauter

Graduate Student Papers (CS)

As high-performance computing becomes progressively heterogeneous, the dependence upon vendor specific tools for numerical correctness has become an impediment to portability. Although modern GPUs comply with the IEEE 754 standard, the lack of practical native hardware support to raise and handle exceptions (special values like ±∞ or NaN) is a well-known architectural limitation. To embed portable numerical correctness across heterogeneous systems, we propose an architecture agnostic prototype based on LLVM-compiler infrastructure. This framework detects floating-point exceptions in GPU kernels at the Intermediate Representation (IR) level, instrumenting both device code and host code, strictly complying with the 2019 IEEE 754 standard. …

Anaerobic Digestion Of Variable, Heterogeneous Organic Wastes Under Changing Operational Conditions And Bioaugmentation: Impacts On Process Performance And Microbiome Dynamics, Victoria Holliday

Theses and Dissertations--Biosystems and Agricultural Engineering

Expanding the adoption of anaerobic digestion (AD) is limited by system instabilities caused by feedstock composition and variability. Understanding how changes in feedstock and operational parameters influence microbiome dynamics is essential for developing biology-driven strategies to improve digester stability.

Two semi-continuous reactors, an experimental and a control, operated over 39 weeks across five phases with varying feedstocks and organic loading rates. Substrate-specific enrichment cultures were developed for bioaugmentation and implemented in select phases to assess its impact. Both reactors exhibited similar performance, transitioning through periods of stability, stress, and recovery in response to operational changes. Corresponding shifts in dominant taxa …

Proposed Design Approach Of Bolted Cruciform Stiffened End-Plate Connections And Bolted Circular Flange Plate Connections Under Combined Loading For Enhanced Economy And Performance, Cesar E. Aguirre

Civil Engineering Dissertations

This research will deliver a substantive contribution to the advancement of design practice for bolted circular flange connections and cruciform stiffened end-plate connections — critically evaluating existing approaches, identifying their limitations, and proposing evidence-based design frameworks that enhance structural performance, predictability, and safety across relevant engineering applications.In addition provide economical benefits.

Business Process Redesign For Reducing Undelivered Product Return Losses In E-Commerce – An Explainable Ai Approach, Venkataraghavan Krishnaswamy, Deepa R, Himanshu Sharma

Journal of International Technology and Information Management

Product returns in e-commerce affect the profitability of the e-tailer. We adopt a two-stage approach to reduce undelivered product returns in an e-commerce firm. First, we develop and compare machine learning techniques—logistic regression, decision trees, Naïve Bayes, random forest, adaptive boosting, gradient boosting, stochastic gradient boosting, and deep neural networks—on their ability to predict undelivered returns. Next, we use explainable methods, such as relative importance and Shapley values, to develop insights from the best-performing machine learning model. Finally, we use these insights and the predictive model to redesign the firm’s order fulfillment and return processes. A Post-implementation evaluation of the …

Metabolic Reprogramming Following Mitochondrial Transfer Between Idh2-Mutant Chondrosarcoma Cells And A Normal B-Cell Line, Caleb Wyckoff, Christopher Osgood, Ellen Jing, Michael Stacey

Bioelectrics Publications

Background/Objectives: Chondrosarcoma, glioblastoma, acute myeloid leukemia, chronic lymphocytic leukemia, and cholangiocarcinoma cancers all contain mutations in the gene isocitrate dehydrogenase 2 (IDH2). The mutant IDH2 enzyme metabolizes alpha-ketoglutarate (αKG) into the potent oncometabolite D-2-hydroxyglutarate (D2HG) in the mitochondria of these cancers, leading to altered cellular metabolism. Emerging evidence suggests that mitochondrial transfer between cancer and recipient cells represents an important form of intercellular communication that may influence cellular metabolism. The presence of intercellular TNTs between IDH2-mutant chondrosarcoma cells motivated an investigation into mitochondria-associated physiological changes occurring during an intercellular exchange with immune cells. A mitochondrial transfer is a two-way …

Detecting And Repairing Conflicting Constraints In Co-Trained Physics-Informed Neural Networks For Composite Curing Processes, Cooper J. Evans

Dissertations, Master's Theses and Master's Reports

Composite materials have become a critical component of modern manufacturing, especially in the automotive and aerospace industries. The curing process for these composites has been modeled using a variety of partial differential equations representing the heat transfer and composite curing kinetics. Optimizing the applied temperature profile is critical for maximizing the efficiency and capacity of composite part manufacturers. Constraints must be placed on the inputs and outputs of the model, including but not limited to, the applied temperature profile, part temperature, and final degree of cure. Conflicting sets of constraints are easy to unknowingly impose due to the highly coupled …

Torque-Based Detection And Isolation Of Bucket-Specific Load Variations In A Continuous Bucket Ladder Excavator, Mason R. Krause

Dissertations, Master's Theses and Master's Reports

Understanding how cutter geometry, material, and operating conditions influence excavation performance is critical for the design of lunar surface systems operating in regolith environments. This work presents a torque-based methodology for detecting and quantifying bucket-specific load variations in a continuous bucket ladder excavator. A nine-bucket excavator was constructed to record drivetrain torque while operating in a regolith simulant over multi-day test periods. Each bucket featured a unique combination of cutting edge material and geometry. A method was developed to separate the continuous torque data into individual excavation events, enabling identification of individual bucket interactions. Analysis of the resulting event-based dataset …

On The Influence Of Faraday Waves On Transport In Resonant Acoustic Mixing, Preston David Silverstein

CGU Theses & Dissertations

Resonant acoustic mixing (RAM) uses low frequency high acceleration oscillatory forcing to combine fluids, particles, and powders. Although progress has been in adjacent RAM fields, there are still gaps in understanding how Faraday surface instabilities affect momentum transport to the bulk fluid and particles therein. This work investigates the energy pathways that an oscillatory mixer has and connects surface deformation to bulk rotational flow and particle forcing. This study is conducted in three phases. In phase 1, a thermodynamic first- and second-law analysis couples the surface features with the scale of subsurface rotational features. Experimental surface measurements showed that for …

Gradient-Based, Post-Optimality Sensitivity Analysis With Respect To Parameters Of State Equations, Gene Hou, Jonathan Degroff

Mechanical & Aerospace Engineering Faculty Publications

Design optimization is a computational tool that can enable a designer to investigate the effectiveness of a design concept in an organized format. However, this design process requires the design variables, constraints, and objective function to be properly defined and expressed in mathematical forms. Post-optimality analysis thus becomes a necessary step to investigate different variations in the problem formulation and parameters to ensure that optimization produces a stable and trustworthy outcome. One efficient way to achieve this aim is to compute the local derivative of the optimized objective function with respect to the optimization problem parameters, such as bounds on …

Uncertainty-Aware Estimation, Planning, And Control For Tracking Multiple Drifting Patches In Flow Fields, Daniel O. Akanji, Krishnanand N. Kaipa, Cong Wei

Mechanical & Aerospace Engineering Faculty Publications

In this study, we present a replay-based framework for uncertainty-aware persistent tracking of multiple advected surface patches using an autonomous marine vehicle operating in spatiotemporal-varying currents. The method combines three components: local flow estimation, covariance-aware patch-boundary propagation with intermittent boundary fusion, and mission-level scheduling over multiple patches. Each patch is represented by a polygonal boundary, whose vertices are propagated through the estimated flow field while carrying per-vertex covariance, thereby quantifying uncertainty growth during advection. A flow-aware gain-scheduled linear quadratic regulator (LQR) was designed to shape the desired surge speed to take advantage of favorable currents. When the vehicle services a …

Influence Of Motion Artifacts On Instantaneous Frequency Based Heart Rate Variability Of Arterial Pulse Signals Measured By A Tactile Sensor: An Analytical Study, Mamun Hasan, Zhili Hao

Mechanical & Aerospace Engineering Faculty Publications

Objective: Heart rate variability (HRV), quantified via the instantaneous frequency (IF) of arterial pulse signals, is a key indicator of cardiovascular (CV) regulation. This study presents a theoretical and experimental investigation of how motion artifacts (MA) influence IF-and thus HRVmeasured with a tactile sensor, emphasizing underlying mechanisms rather than population-level validation. Approach: Building on a previously developed single-degree-of-freedom (SDOF) model of the tissue-contact-sensor (TCS) stack between the sensor and the artery, MA is represented as low-frequency baseline drift and time-varying system parameters (TVSP) of the TCS stack. Analytical expressions quantify the effect of MA on the IF of each harmonic …

Code-Net++: An Attention-Guided Deep Learning Framework With Grad-Cam-Based Explainability For Covid-19 Detection Using Chest X-Ray Images, Fareesa Amina, Dr Krishnanaik Vankdoth

Mansoura Engineering Journal

Chest radiograph imaging has emerged as a practical and scalable diagnostic modality for respiratory diseases, including COVID-19. However, accurate discrimination of COVID-19 manifestations from other pulmonary abnormalities remains challenging because of low contrast, imaging noise, and overlapping radiographic patterns. This work presents CODE-NET++, an enhanced attention-guided deep learning framework with Grad-CAM-based explainability for reliable COVID-19 detection using chest X-ray images. The proposed framework integrates adaptive trilateral filtering for image enhancement, Reverse Edge Attention Network (RE-Net) for lesion-aware segmentation, and an Enhanced LinkNet architecture with dilated convolutions for multiscale feature extraction and classification. Grad-CAM-based explainable artificial intelligence visualization is incorporated to …

Virtualized And Distributed Neighborhood Data Centers, Benjamin T. Niccum

Computer Science and Engineering Theses

This thesis evaluates whether PCIe-fabric-based resource pooling can support a decentralized neighborhood micro-data-center model under real implementation constraints. The work combines architecture design, prototype deployment, performance benchmarking, and security assessment. Results show strong prototype-scale feasibility with low-latency and high-throughput behavior, while also identifying deployment-blocking security gaps and operational maturity requirements. The thesis contributes an evidence-traceable path from concept validation to deployment-grade roadmap planning.

The Rise In Height And Curb Weight Of The Top-Selling Vehicles In The United States From 1991 - 2025: Implications For Engineering Design And Vulnerable Road Users, Samuel L. Steinman-Friedman

Civil Engineering Theses

Road fatalities are higher in the United States than in other high-income regions. In 2024, 39,254 people died on roads in the United States compared to 19,940 in the European Union. These two regions have comparable exposure metrics, such as population size, roadway network length, and fatalities per mile traveled. Light trucks dominate the U.S. market, whereas hatchbacks are prevalent in Europe. The trendline of the average height and curb weight of the top-selling vehicles in the United States has increased by 0.24 inches and 23.52 pounds per year since 1991. The average 2025 top-selling U.S. passenger vehicle is 7.5 …

A Machine Learning–Based Framework For Traffic Classification And Threshold-Based Load Management In 5g Network Slicing, Safi Ibrahim, Younis S. Younis, Kamal S. Hamza, Mohamed M. Ashour

Mansoura Engineering Journal

This study proposes a machine learning–based framework that applies machine learning techniques to improve the efficiency of 5G network slicing through automated traffic classification and threshold-based load management . The proposed model optimizes resource allocation among the three standardized 5G slice types: enhanced Mobile Broadband (eMBB), ultra-Reliable Low-Latency Communication (URLLC), and massive Machine-Type Communication (mMTC). Two supervised learning algorithms—K-Nearest Neighbors (KNN) and Support Vector Machine (SVM)—are trained using Quality of Service (QoS) parameters such as packet delay, loss rate, and Quality Class Identifier (QCI). Experimental evaluations were conducted on two large-scale datasets containing over 400,000 traffic instances, demonstrating that the …

Autonomous Coupler Alignment Using Position-Based Visual Servoing In A Ros~2 Framework, Nickolas Giffen

Graduate Research Theses & Dissertations

As robotic arms are becoming increasingly common alongside humans as collaborative robots, their high precision in motion enables tasks to be performed at significantly higher speeds with reduced disruption in the environment. The Fermi National Accelerator Laboratory is exploring this application by incorporating a UR16e from Universal Robots in a cleanroom setting during assembly of couplers to superconducting radio frequency cavities as part of the PIP-II project. The goal of the robotic assembly process is to precisely position the UR16e robot so that the coupler flange, mounted on the robot’s end-effector, is accurately aligned with and pressed against the cavity …

Probing Proficiency-Related Neural Representations With Pca And Ica, Onila R. Narayana Mudalige Don

Graduate Student Theses, Dissertations, & Professional Papers

How proficiency-related information is represented in task fMRI depends not only on the data themselves, but on the representational lens used to summarize them. This thesis examines second-language (L2) proficiency as a problem of representational organization rather than as a simple classification exercise. Using task fMRI from adult language learners performing semantic animacy judgments in their native language (L1) and second language (L2), I derive shared low-dimensional network representations with principal component analysis (PCA) and independent component analysis (ICA), then evaluate those representations under matched leakage-controlled decoding pipelines.

Across analyses, the central comparison is between representational frameworks rather than between …

Cross-Layer Supervisory Control For Low-Altitude Uav Swarm Networks, Nitin Singh Rathore

Computer Science and Engineering Theses

Low-altitude unmanned aerial vehicle (UAV) swarms are increasingly used in applications such as aerial sensing, disaster response, and communication support, where reliable operation under dynamic and uncertain conditions is essential. In these environments, performance degradation arises from multiple sources, including external disturbances, sensing uncertainty, and communication impairments. Although these effects originate from different layers of the system, such as dynamics, observation, and networking, they often manifest as similar tracking or coordination errors. Conventional control approaches, which rely primarily on error-driven feedback, do not explicitly account for the underlying cause of these deviations, limiting their effectiveness in multi-agent settings. This thesis …

Gaussian Process Regression–Based Uncertainty Quantification For Unmanned Aircraft System Traffic Management And Advanced Air Mobility Applications, Aakarshan Khanal

Mechanical and Aerospace Engineering Dissertations

Uncertainty quantification has gained significant attention in recent years as a research area in dynamical systems. Mathematical representations of the physical system, combined with an understanding of model uncertainties, enable the propagation of uncertainty in temporal space, which allows us to make informed decisions. However, what if the true dynamics of the system is unknown or too complex to define explicitly? In such cases, the system’s behavior can instead be inferred or learned from observed input–output data rather than from an analytical or physics-based model. To this end, this dissertation focuses on developing a data-driven framework for nonparametric dynamics modeling, …

Assessment Of Local Amplification Causes At Coastal Strong Motion Stations With Elevated Ground Motion Residuals From The 2024 Tewksbury, New Jersey Earthquake, Patrick Daniele

Open Access Master's Theses

Elevated ground motion amplitudes at individual stations are commonly observed in earthquake datasets, yet the physical causes of these residuals are often not explicitly identified. This study investigates two seismic monitoring stations in southeastern New York that recorded amplified motions during the 2024 Mw 4.8 Tewksbury, New Jersey earthquake. A consistent set of established geophysical methods -- including multichannel analysis of surface waves (MASW), passive ambient noise arrays (MAM), stochastic inversion, horizontal-to-vertical spectral ratio (HVSR) analysis, and directional spectral ratio techniques -- was applied to directly characterize site conditions and identify the mechanisms contributing to amplification.

Results show that elevated …

Evaluation Of Two-Group Iate Coupling With Pbe For Beyond Bubbly Flows In A Large Diameter Pipe, Sungje Hong, Joshua P. Schlegel, Subash L. Sharma

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

This study evaluates the two-group interfacial area transport equation (2G IATE) coupled with the S-Gamma (Sγ) population balance equation (PBE) model for beyond bubbly flow regimes in a vertical large-diameter pipe. The 2G IATE framework incorporates intergroup mass transfer mechanisms and is implemented within the Sγ model, which assumes a log-normal bubble size distribution. The numerical approach is validated against experimental data from Schlegel et al. (2012), with a focus on the void fraction and interfacial area concentration (IAC) distributions. The results show that 2G IATE improves the predictions of the void fraction and IAC, although its accuracy varies with …

Stoichiometry-Controlled Surface Reconstructions In Epitaxial Abo3 Perovskites For Sustainable Energy Applications, Habib Rostaghi Chalaki, Ebenezer Seesi, Gene Yang, Mohammad El Loubani, Dongkyu Lee

Faculty Publications

ABO₃ perovskite oxides are a versatile class of materials whose surfaces and interfaces play essential roles in sustainable energy technologies, including catalysis, solid oxide fuel and electrolysis cells, thermoelectrics, and energy-relevant oxide electronics. The interplay between point defects and surface reconstructions strongly affects interfacial stability, charge transport, and catalytic activity under operating conditions. This review summarizes recent progress in understanding how oxygen vacancies, cation nonstoichiometry, and electronic defects couple to atomic-scale surface rearrangements in representative perovskite systems. We first revisit Tasker’s classification of ionic surfaces and clarify how defect chemistry provides compensation mechanisms that stabilize otherwise polar or metastable …

Vibration-Based Fault Diagnosis In Industrial Rotating Machinery, Yaman Pandey

All Graduate Theses, Dissertations, and Other Capstone Projects

Unplanned downtime caused by rotating machines results in a significant percentage of the total downtime in manufacturing plants. These downtimes cause significant loss of production time. While preventative maintenance helps minimize lot of these downtimes, it can’t predict the upcoming downtimes and prevent them from occurring. That gave birth to predictive maintenance. While various techniques are used for predictive maintenance, vibration analysis is one of them. In this study, data driven and expert validated diagnosis using vibration analysis for rotary machinery is used. The data is collected from a manufacturing site in Minnesota where 32 rotating assets, including motors and …

Beyond Permissions: A Privacy And Security Analysis Of Sensor And Network Activity On Xr Devices Using Xrmonitor, Gayatri Sravya Siripurapu

Computer Science and Engineering Theses - Archive

Standalone virtual reality headsets integrate multiple sensors and cameras whose runtime behavior is not transparently documented, creating potential privacy and security risks that are difficult to audit using existing tools. The relationship between software feature activation and the underlying hardware engaged at runtime remains opaque, limiting the ability of users and researchers to assess what data is being collected and when.

This thesis presents XRMonitor, a unified framework for monitoring and analyzing sensor activation behavior and network traffic on Meta Quest devices. The framework is motivated by the lack of transparency in how standalone XR devices engage their hardware sensors …

Interpretable Machine Learning For Bridge-Pier Scour Prediction And Flood Resilience, Adil Khan, Dalya Ismael

Engineering Technology Faculty Publications

Bridge-pier scour is a leading cause of flood-induced bridge failure, yet practice still lacks transparent, physics-informed tools that link data-driven prediction with design guidance. This study develops an interpretable, physics-aware machine-learning framework to predict equilibrium scour depth and translate those predictions into actionable strategies for flood-resilient infrastructure. Using the 2014 U.S. Geological Survey Pier-Scour Database (569 laboratory cases), five models: Gradient Boosting, AdaBoost (Tree), XGBoost, Gaussian Process (RBF kernel), and Kernel Ridge (polynomial), were trained and evaluated with K-fold cross-validation. Model performance was evaluated using R², RMSE, and MAE. Gradient Boosting performed best, achieving training and testing R² of 0.99 …

Reliability-Based Performance Evaluation Of Slurry Wall For Leakage Control At Chakaria Landfill, Bangladesh, Shishir Bhandari

Civil Engineering Theses

Landfill leachate threatens groundwater quality in low-lying coastal Bangladesh, where a shallow water table and a discontinuous natural clay barrier heighten contamination risk beneath municipal solid waste sites. At the Chakaria Landfill in Cox's Bazar District, a cement-bentonite slurry wall was proposed as a vertical cutoff to control seepage, but its reliability under the site's high-groundwater condition had not previously been evaluated in probabilistic terms.

This study evaluated the wall's performance using a two-dimensional SEEP/W finite-element seepage model, a validated response surface (RSM) equation relating seepage rate to wall permeability, thickness, depth, and a Hasofer-Lind first-order reliability (FORM) analysis built …

Concord Public Transportation Improvement Project, Jacob Holt

Honors Theses and Capstones

The capital city of Concord, New Hampshire, has been served by Concord Area Transit (CAT) since 1989. Despite continued population growth and economic development within the city, CAT’s fixed route bus system has remained unaltered since 2011. The purpose of this project is to rework the CAT system to provide service that better aligns with Concord resident’s current needs. A public survey was conducted to gather data regarding Concord resident’s needs, habits, and perception of the existing system, which was used in the development of the revised system. The project includes suggestions for both system-wide and route-specific modifications. Key changes …

Restoring Tidal Function: Hydrologic And Erosion Controls, On Rare Plant Distribution In New Hampshire Salt Marshes, Nikhila B. Lampman

Honors Theses and Capstones

No abstract provided.

A Mold Mating Surface Temperature Monitoring System For Injection Molding Using Infrared Thermography And Mahalanobis Distance, Yoshio Fukushima, Makoto Fukushima, Sho Shibuya, Keigo Kudo, Yuta Abe

ASEAN Journal on Science and Technology for Development

In plastic injection molding, minimizing defects is crucial for sustainable and stable manufacturing because resin behavior and molding conditions fluctuate due to variations in material lots, seasonal shifts, and factory environmental factors such as temperature and humidity. Among various process parameters, mold temperature　- specifically the mold mating surface temperature immediately after part ejection-　 plays a critical role in mitigating these variations and maintaining consistent product quality. However, embedding conventional sensors into the mating surface is structurally difficult. While non-contact infrared thermography is an effective alternative, shiny metallic mold surfaces suffer from low emissivity, leading to inaccurate readings. Furthermore, high-end …