Digital Commons Network^™

Automatic Determination Of Mechanical Properties From Molecular Dynamic Stress-Strain Curves Using Regression Fringe Response, Josh Kemppainen, Tristan Muzzy, Travis Wavrunek, Gregory Odegard

Michigan Tech Publications

Molecular dynamics (MD) simulations have become a powerful tool for studying polymers, designing new materials, and composites. Mechanical behavior in MD simulations are typically evaluated through stress-strain curves. However, MD-generated stress-strain curves are often obscured by thermal noise from atomic vibrations. This noise complicates the reliable derivation of mechanical properties and hinders objective and reproducible analysis. The noise in the stress-strain curves has been removed by using a Butterworth low-pass filter, enabling clearer interpretation of stress-strain data. Building on this, a novel analysis framework the Regression Fringe Response (RFR) is introduced to systematically determine the Young's modulus, yield strength, and …

Ortega Observatory Weather Station, L. Collins, B. Erskine, L. Houck, E. Kornbau

Electrical Engineering and Computer Science Student Publications

The team’s mission was to create an automated weather station with a convenient display to give information on conditions that affect the ability to observe such as rain and wind, in addition to performing necessary maintenance or repair on the Ortega Observatory and aiding in the construction of the PCB that will control the telescope movement arms.

Growing Large Single And Multi-Crystals From Alum Powder, Owen Paulson, Mayra G. Aguilar, Owen T. Maloney, Kole C. Koehler

Research & Creative Achievement Day

Crystal growth science is used to replicate the growth of crystals that form in nature. Channels of hot fluid with concentrations of minerals created the crystals found as gemstones. At low concentrations, no crystal grows. At high concentrations, a multitude of crystals grow. At the ideal concentration, a single, clear crystal grows. Four solution concentrations were used to create seed crystals. Those Alum seed crystals were attached to a string and suspended in various concentrations of Alum solution to find concentrations that create no crystal, a single crystal, and a multi-crystal.

Design And Fabrication Of A Composite Torpedo Baseball Bat, Peyton A. Lee, Carter Mathison, Jaden J. Schwantz, Noah Misukanis, Cole V. Stalberger

Research & Creative Achievement Day

Observing current trends in Major League Baseball, there has been increasing interest in torpedo-style wood bats due to their unique weight distribution. Unlike traditional bat geometries, the torpedo design shifts more weight toward the hands, improving balance and allowing for greater control throughout the swing. This project applies the same concept using composite materials so that high school and college players can also have access to this design innovation. The proposed bat is constructed from carbon fiber reinforced polymer with an epoxy resin to create a lightweight and durable structure. The design aims to maintain the performance benefits of the …

Llm For Clinical Named Entity Recognition: A Study On Rag With Pubmed And Umls, Apoorv Tripathi

Electronic Theses and Dissertations 2020 - Present

The first step of biomedical NLP is recognizing clinical named entities, which consist of identifying and categorizing a variety of clinical entities such as diseases, symptoms, genetics, diagnostic tests, procedures, etc. from a body of unstructured clinical text. This study presents a PubMed and UMLS based Retrieval Augmented Generation framework which improves the performance of the Large Language Models to identify clinical entities by providing context. In particular, the framework consists of a two-stage pipeline, where candidate tokens are identified from initial LLM-based classification and refined with retrieved context from either PubMed or UMLS. The proposed framework is assessed across …

Mechanism Of Improved Miscibility Of Co2–Oil Systems By Multiester-Headgroup Surfactants, Ning Xu, Yanling Wang, Baojun Bai, Yu Zhang, Wenjing Shi, Zhaonian Zhang, Wenhui Ding, Peixu Ma, Zan Gao

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In the pursuit of carbon neutrality, the CO₂-enhanced oil recovery provides dual benefits by enabling both carbon sequestration and incremental oil production. However, its application is limited by high minimum miscibility pressure. CO₂-philic and oil-affinitive surfactants have emerged as an effective, low-dosage, and cost-efficient strategy to reduce the minimum miscibility pressure. In this study, macroscopic phase behavior experiments combined with molecular dynamics simulations were employed to systematically elucidate the influence of multiester-head surfactants on CO₂–oil miscibility. Using a modified pressure–volume–temperature apparatus equipped with optical power monitoring, we determined that multiester-head surfactants reduced the first-contact …

Energetic Characterization Of 3-D Printed Acrylonitrile Butadiene Styrene Fuels For Hybrid Rocket Propulsion Applications, Stephen A. Whitmore, Ryan J. Thibaudeau, Ava T. Wilkey

Mechanical and Aerospace Engineering Faculty Publications

Hybrid rocket technologies are gaining recognition as eco-friendly alternatives to traditional propulsion systems. Utah State University’s Propulsion Research Laboratory has developed a High-Performance Green Hybrid Propulsion (HPGHP) technology, leveraging 3D-printed ABS fuel for reliable, low-energy ignition. Among tested materials, only ABS shows suitable electrical-breakdown properties for arc ignition. Unfortunately, due to the proprietary formulations in commercial ABS blends, and its limited use as a rocket-propellant, related composition and combustion data are limited. This study uses spectroscopic evaluation and bomb calorimetry to estimate material compositions, enthalpies of formation, and combustion energies for multiple commercially available 3-D print feed stock ABS types, …

Uscis-Grounded Ai: Preventing Hallucinations In Immigration Legal Services, Hephzibah Igwe

ONU Student Research Colloquium

Artificial intelligence chatbots increasingly provide legal information to consumers, but AI "hallucinations" (confidently stated but incorrect responses) pose serious risks in immigration law. Incorrect information about USCIS forms, fees, processing times, or filing procedures can result in visa denials, deportation proceedings, or permanent bars to entry.

This research presents a novel "source-grounded AI" system that eliminates hallucinations in immigration legal information. Rather than relying solely on large language models (LLMs) trained on general internet data, the system uses USCIS.gov as the primary source of truth for all operational data including current forms, fees, processing times, filing addresses, and policy updates. …

Mason Avenue Culvert, Caden Boynton

Honors Theses

This project addressed the replacement of a culvert crossing Wabascon Creek along North Mason Avenue in Battle Creek, Michigan. Following significant flooding caused by snowmelt in 2023, the existing wooden box culvert—originally constructed in the 1960s—sustained damage when inlet wingwalls detached from the structure, requiring temporary repairs. Design alternatives were developed to provide a durable and reliable replacement, incorporating structural, water resources, transportation, and construction engineering considerations. The design process also addressed environmental sustainability requirements, cost-effectiveness and constructability. Final deliverables included engineering calculations, plans and specifications, a cost estimate and a project schedule to support implementation of a resilient long-term …

Ergonomic And Material Flow Improvements For A Medical Device Assembly Line, Matthew Kobus

Honors Theses

This project evaluated material handling inefficiencies and ergonomic concerns within Stryker’s Neptune medical device assembly line. Two primary issues were identified: lack of a standardized part-location system in the supermarket and excessive operator travel between subassembly and main assembly. These issues resulted in search waste, motion waste, lost production time, and increased ergonomic strain.

To address the labeling issue, a standardized bin labeling system was developed and tested. A time study comparing labeled and unlabeled conditions showed that average retrieval time decreased from approximately 120 seconds to 22 seconds, an 81% reduction. Statistical analysis confirmed that this improvement was significant …

Integration Of Bayesian Networks And Neural Networks For High-Dimensional Data Analysis, Cooper Schmer

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

High-dimensional biomedical datasets, such as omics data, present significant challenges for predictive modeling due to noise, redundancy, and computational complexity. This thesis proposes a hybrid framework that integrates Bayesian Networks (BNs) and Artificial Neural Networks (NNs) to improve classification performance of such data sets while reducing input dimensionality. Central to this work is a novel feature selection method based on d-separation, a structural property of Bayesian networks that encodes conditional independence relationships.

The proposed approach introduces a count-based d-separation metric to quantify the relevance of variables to a target outcome, along with a thresholding scheme to balance feature selection robustness …

Space Degradable Pyrotechnic Fastener, Jonathan Baker

Honors Theses

Space debris has become a critical threat to orbital operations, with over 30,000 tracked objects currently circling Earth. Traditional separation charges used in satellite launches contribute significantly to this problem by generating unpredictable shrapnel that can remain in orbit for decades or centuries. This project proposes the design and development of a spacedegradable explosive bolt that exploits the harsh space environment to accelerate material breakdown after use.

The design utilizes advanced polymer materials selected for their susceptibility to degradation from UV radiation — an environmental factor abundant in Low Earth Orbit (LEO). Our prototype will be engineered to meet industry-standard …

Development Of A Grease Resistant Barrier For Food Industry Applications, Mira Marino

Honors Theses

The objective of this project is to develop a grease-resistant barrier coating for paper-based food packaging and to evaluate the economic feasibility of implementing this coating system at an industrial scale. As demand increases, this project focuses on identifying an optimal pigment and binder combination that enhances barrier performance while maintaining cost-effectiveness. The primary goal was to maximize grease and moisture resistance of coated paper while ensuring the process is economically viable and compatible with existing paper mill operations.

The final plant design consists of one continuous stirred tank reactor (CSTR) and three centrifugal pumps integrated into an existing paper …

Enhancing Lane Detection In Autonomous Vehicles Using Data Augmentation For Adverse Environmental Conditions, Rutvikkumar Dave

Electronic Theses and Dissertations 2020 - Present

To make sure that self-driving and connected automobile technologies are safe and work well, it’s really important that they can correctly identify lanes. But lane detection Algorithms typically have a hard time working well when the weather is bad, such when it rains, fogs, or goes too fast. The circumstances cause visual distortions that make existing computer vision systems less reliable, which makes it harder requires autonomous navigation systems to work well. This paper introduces a comprehensive lane detection system that integrates synthetic Weather-informed data augmentation combined with a Weather-aware Temporal Lane Detection Network (WTLDNet) to make it easier for …

Swosu Research And Scholarly Activity Fair 2026, Swosu Office Of Sponsored Programs

SWOSU Research and Scholarly Activity Fair Programs

On behalf of the University Research and Scholarly Activity Committee (URSAC) and the Office of Sponsored Programs (OSP) at Southwestern Oklahoma State University, we are pleased to welcome you to the Thirty-Fourth SWOSU Research and Scholarly Activity Fair.

Analysis For Predicting Surface Temperature And Combustion Of Heavy-Duty, Pre-Chamber-Enabled, Hydrogen Engines, Tony Spezia

Master's Theses (2009 -)

Hydrogen as an alternative fuel shows great promise to help reduce greenhouse gas emissions from heavy duty engines. However, the challenge for hydrogen engines is that hydrogen has very different combustion properties compared to conventional hydrocarbon fuels. Hydrogen has very high flame speeds, very low ignition energy, and very wide flammability limit. These properties result in hydrogen engines being prone to abnormal combustion. Abnormal combustion makes hydrogen engines difficult to control or can cause catastrophic damage to the engine, so it is important to avoid conditions where abnormal combustion occurs. Hot spots along the combustion chamber walls are often the …

Design And Application Of Collaborative Simulation System For Satellite Constellation Flight Missions, Dong Yan, Hanzhe Yang, Fangfang Jiang, Chengbao Liu, Peng Zhang

Journal of System Simulation

Abstract: To meet the requirements of the collaborative drill for the ground operation and control system of the satellite constellation, as well as the verification and evaluation of in-orbit complex missions, the design ideas and implementation methods of the collaborative simulation system for satellite constellation flight missions were proposed. By adopting the time correction mechanism of the time-scale distributor, the time synchronization problem among the simulation nodes and the operation and control simulation system was solved. By adopting the communication technology based on improved PDXP + UDP, the problem of cross-node data interface and inter-satellite communication simulation was resolved. A …

Edgecube -- An Iot Edge-Sensor Node For Tiny Machine Learning Applications, Nathan Gerard Timmins

Master's Theses (2009 -)

This thesis presents a novel internet-of-things (IoT) edge device, EdgeCube, a compact embedded system that combines a microcontroller unit (MCU) and a field-programmable gate array (FPGA). The proposed platform explores a trade-off between the performance gains achievable through FPGA-based acceleration and the associated increases in cost and power consumption. The primary contributions of this thesis include (1) the design of a compact hybrid MCU–FPGA edge architecture intended for vision workloads, (2) a streaming MCU-to-FPGA data path using SPI for frame transfer, and (3) an end-to-end hardware prototype and evaluation on an embedded inference task. Designed for IoT vision applications, EdgeCube …

Evaluating The Impact Of Residential Landscape Audits Using 5-Second Water Use Data, Mahmud Aveek, Camilo J. Bastidas Pacheco, David E. Rosenberg, Jeffery S. Horsburgh, Kelly Kopp, Belize A. Lane

Civil and Environmental Engineering Student Research

We used 5-s water use data to evaluate the effectiveness of residential landscape water audits in summer 2022. Fifty-nine households in two northern Utah cities were monitored for 2–5 weeks before and 3–10 weeks after an audit. We found that the distribution of weekly irrigation volumes postaudit was statistically less than the distribution preaudit (significant at the 1.9E10-5 level). Collectively, the participants reduced their landscape irrigation water use by approximately 379,000 L per week (100,300 gal per week; 0.3 acre-feet per week). We also analyzed changes in irrigation event volume, duration, frequency, and the number of days between events at …

Interpretable Machine Learning For Predicting Splitting Strength Of Asphalt Concrete: Insights From Shap Analysis, Jianglei Xing, Xiao Tan, Yihao Li, Dongzhao Jin, Pengwei Guo, Yuhuan Wang, Huiya Niu

Michigan Tech Publications

This paper proposes an interpretable machine learning approach for predicting the splitting strength of asphalt concrete and supporting data-driven mixture design. A database consisting of 296 samples was constructed, and 14 input variables related to asphalt properties, aggregate gradation, and fiber characteristics were selected for modeling. Eight machine learning models, namely TabPFN, ANN, SVR, RF, XGBoost, LightGBM, FLAML, and FT-Transformer, were developed and compared. The results show that all eight models achieved satisfactory predictive capability, whereas TabPFN overall achieved the best performance in the Monte Carlo cross-validation, with the lowest average RMSE of 0.34 ± 0.10, the lowest average MAE …

The Digital Neuron: Neural Cellular Automata For Neural–Symbolic Translation, Nicole Assenza

SMU Data Science Review

A neural cellular automata (NCA) architecture, referred to as Pluto’s NCA, was developed to characterize bilateral communication and semantic reciprocity between symbolic representations and a spatially distributed update field. The architecture employs an encoder–automata–decoder pipeline that maps symbolic inputs into a multichannel state field and reconstructs them through agreement-driven attractor convergence within a stable semantic attractor landscape. System behavior was evaluated under controlled perturbations, including rhythmic desynchronization, graded ablations, correlated and independent noise, and percolation-based structural degradation. Quantities such as Agreement(t), internal coherence Aᵢ(t), the recovery time constant τ, and the critical percolation threshold pc were measured to assess stability, …

Robust Non-Invasive Cardiac Index Prediction Via Feature Integration And Data-Augmented Neural Networks, Chih-Hao Chang, Mei-Ling Chan, Yu-Hung Fang, Po-Lin Huang, Tsung-Yi Chen, Tsun-Kuang Chi, I Elizabeth Cha, Tzong-Rong Ger, Kuo-Chen Li, Shih-Lun Chen, Liang-Hung Wang, Jia-Ching Wang, Patricia Angela R. Abu

Department of Information Systems & Computer Science Faculty Publications

Concurrent with the rising consumption of ultra-processed, high-calorie diets and the decline in physical activity, obesity and related cardiovascular conditions among young adults have continued to increase, becoming an important global public health concern. This study integrates non-invasive Internet of Things (IoT) sensing devices, including the TERUMO ES-P2000 blood pressure monitor (Terumo Corp., Tokyo, Japan) and the PhysioFlow PF07 Enduro cardiac hemodynamic analyzer (Manatec Biomedical, Poissy, France), with an artificial neural network (ANN) for cardiac index (CI) prediction. Through appropriate data preprocessing and model training strategies, the generalization ability and stability of the proposed CI prediction model were significantly enhanced. …

Temperature Determination And Scene Change Artifact Mitigation When Using Fourier-Transform Spectroscopy On Targets With Time-Varying Temperature, Kode A. Wilson, Michael L. Dexter, Benjamin F. Akers, Anthony L. Franz

Faculty Publications

Fourier-transform spectroscopy is a widely used technique for determining the spectral and thermal properties of a target. However, target temperature variations during measurement can compromise the spectral accuracy. Temperature fluctuations induce oscillations superimposed on the target spectrum. These oscillations, referred to as scene-change artifacts, degrade the spectral accuracy. The literature is divided, with theoretical predictions suggesting negligible artifacts and growing experimental evidence reporting significant artifacts. This paper presents a theory and experimental validation of scene-change artifacts originating from target temperature variations. Traditionally, the interferogram offset is assumed to be constant, an invalid assumption for a changing scene. The error is …

Revitalising Tanzania’S Textile Industry Through The Uk Textile System’S Role, Charles M. Kahabi

Tanzania Journal of Engineering and Technology (TJET)

Currently, there is the environmental and social challenges emerging from the global clothing and textile industry, specifically on textile waste management.  Additionally, the flow of second-hand clothing (SHC) between European countries especially the UK and Tanzania is increasing. In the UK, rapid growth of second-hand clothing (mitumba) driven by fast fashion results in vast quantities of discarded garments, of which only a fraction is recycled, leaving the remainder in landfills. Conversely, Tanzania has long depended on imported SHC a practice that, while affordable, has undermined local textile industries and contributed to waste accumulation. By examining Tanzania’s textile landscape, the research …

Silicon Dioxide Multimode Interferometer Spectrometers, James Harkness

Theses and Dissertations

Multi-mode interferometer (MMI) spectrometers are a type of reconstructive micro-spectrometer based on imaging light propagation patterns in MMI waveguides. This dissertation describes how the MMI spectrometer was implemented for the first time using a silicon dioxide core. This approach showed a 6 dB improvement in SNR over SU-8 core devices. To implement the silicon dioxide MMI spectrometer, a fabrication technique for selectively roughening the surface of the waveguide needed to be developed. SU-8, a photosensitive polymer, was etched with oxygen plasma to create grass-like nanostructures. SU-8 grass can then be used as a transfer mask to plasma etch a surface. …

Implementation Of The Fourth Industrial Revolution Technologies In Tanzania’S Downstream Oil And Gas Industries, Vitalis John Mwinyi

Tanzania Journal of Engineering and Technology (TJET)

The advent of the fourth industrial revolution (IR4.0) has resulted in the digital transformation of multiple sectors of the economy due to the disruptive nature of the technologies driving the revolution. The technologies have already found their way into the oil and gas industries across the globe, especially in upstream, midstream, and downstream operations. However, the degree of implementation is not the same for these operations, considering the complexities involved, integrated process, the associated risk and investment cost, among others. This study aimed to establish the implementation level of IR4.0 technologies in the downstream operations. A survey method was employed …

Emergent Dynamics In Multiplex Social Networks: Agent-Based Modeling Of Information Diffusion For Misinformation Control, Harshvardhan Prabhakar Ghongade, Anjali Ashokrao Bhadre, Shivani Agarwal, Harjitkumar Uttamrao Pawar, Harshal Subhash Rane

Northeast Journal of Complex Systems (NEJCS)

Information misrepresentation is widespread in multi-layered social networks which provide multiple avenues to communicate information. As such, it presents significant opportunities for both information integrity and public discourse to be undermined by disinformation. This paper outlines a new agent-based model, developed to capture emergent dynamics of multi-layered social networks and to help identify technical means to mitigate information misrepresentation in complex systems. A key component of this research includes a novel Multi-Layer Information Diffusion Model (MLIDM), integrating both cross-layer communication among agents, as well as heterogeneous agent behaviors and adaptive intervention strategies. Our methods employ a three-stage process to model …

Stack-Based Exploit Development Techniques In Mips Architectures, Justin Applegate

Theses and Dissertations

Memory corruption vulnerabilities in binary executables represent a serious threat to software security, particularly in embedded and IoT (Internet of Things) devices that commonly use the MIPS architecture. While exploit development techniques for x86 are well-documented in academic literature, little systematic work exists on how those techniques translate to other architectures such as MIPS. This research addresses that gap by evaluating thirteen stack-based exploit development techniques and subtechniques, originally designed in the context of the x86 architecture, for their applicability to MIPS architectures. For each technique, vulnerable C code was written and compiled into both x86 and a set of …

Developing Text-To-Video Ai Workflows Through Creative Practice, Nathan S. Jensen

Staff Scholarship - Australia & Dubai

This creative practice project investigates the extent to which Gen-AI text-to-video tools can maintain coherence across a short multi-shot sequence rather than a single generated clip. This includes continuity in recurring characters, visual style, and simple narrative flow. Using a Creative Practice Scholarship framework and practice-based methodology, I developed Bush Friends, a proof-of-concept children’s television intro, as the artefact of experimentation. This  project combined concept development, storyboard planning, iterative prompting, AI video generation, and editorial assembly using ChatGPT (OpenAI, n.d.) for ideation and prompt development, Kling 3.0 Omni (KlingAI, n.d.) for video generation, and DaVinci Resolve 20 (Blackmagic Design, n.d.) …

Development Of The Automated Verification And Validation System For The Improvement Of Operations Of Morehead State University's Dss-17, Austin S. Music

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science and Engineering Morehead State University in partial fulfillment of the requirements for the degree of Master of Science by Austin S. Music on April 16, 2026.