Digital Commons Network^™

Level Curve Concept For Facility Planning Using The Apple Ii Graphics Tablet, Craig E. Kirkland

Retrospective Theses and Dissertations

The purpose of this effort is to demonstrate the feasibility of using a low cost microcomputer graphics system to assist the practicing engineer in solving facility planning problems. In many cases the lower resolution of the microcomputer system may be adequate and a better choice than a more expensive system. A demonstration microcomputer graphics system was developed using the Apple II Plus computer and an Apple Graphics Tablet. The facility planning problem chosen was single-facility location using the level curve concept in the rectilinear movement case. Two separate programs were written. The first was used to define the layout of …

Data Acquisition And Analysis Routines For Laser Propagation Experiments, Steven M. Burke

Retrospective Theses and Dissertations

Processing and analysis routines giving normalized moments of optical intensity, structure functions of wind velocity and temperature, central moments, and various measures of the turbulence parameter, C²_N, are presented. Rapid analog-to-digital data conversion and storage to implement this analysis using MINC 11/23 with RT11 operating system are discussed. Coding for file organization and implementation of processing routines on the VAX 11/750, VMS operating system are also discussed.

An Evaluation Of Wheelchair Restraint Systems Used In The Transportation Of Disabled Persons, Robin L. Drespel

Retrospective Theses and Dissertations

There has been a significant effort to provide disabled persons with increased independence and mobility. The federal government requires that transportation facilities be made accessible to the disabled, and the number of handicapped persons using these facilities is expected to increase significantly in the future. Restraint systems have been required for passenger cars since the 1960s, and considerable effort has been dedicated to increasing public awareness of the benefits of seat belt usage. Little effort has been devoted to the development of restraint systems for individuals who must use wheelchairs as vehicle seats. A survey was conducted in the Central …

Sampling Rate Conversion As Applied To Speech, Terry E. Tanzey

Retrospective Theses and Dissertations

There are several different ways to perform sampling rate conversion. Two methods for sampling rate conversion are discussed in this paper. The first is the interpolator method (ideal) which uses the interpolation formula. The word “ideal” is used in the sense that given other forms of interpolation, the most accurate results are achieved by using the interpolation formula. Given samples of bandlimited analog signal taken at a rate at least twice the Nyquist frequency, it is possible to reconstruct the original analog signal by using the interpolation formula. The second is the traditional way of sampling rate conversion, which is …

The Application Of Value Analysis Techniques To Service Organizations, David M. Richardson

Retrospective Theses and Dissertations

This research involves review of value analysis and value engineering techniques and application of these techniques to a service organization. Application of value analysis techniques to service organizations required some modification due to the amount of labor intensive, manual operations typical of many service industries. The modified value analysis methodology was applied to a fueling operation performed by Kennedy Space Center as part of their space shuttle operations. The successful application of this technique illustrated that value analysis methodology can be applied to service organizations with slight modifications.

Fiber Optic Temperature Sensors For A Large Electric Power Generator, Daniel A. Lester

Retrospective Theses and Dissertations

Fiber optic temperature sensors are excellent candidates for monitoring the temperature along the stator windings of a large electric power generator. Unlike thermocouple thermometers, they are immune to the effects of strong magnetic fields which are present in all power generators. Several different point and line sensors have been evaluated in their ability to resolve temperature and temperature distribution (respectively), as well as their compatibility with the generator environment. The sensor must function inside the generator for long periods of time (up to 25 years) without benefit of recalibration. This constraint has required us to devise methods by which the …

Multi-Computer Communication With Shared Memory, Jane N. Chang

Retrospective Theses and Dissertations

This thesis describes a design for a multi-computer communication system using a shared memory. The design is implemented using the Motorola EXORset 30/DS35 development systems. The primary use for the shared memory is to act as a message center similar to a mailbox, where each computer can leave messages for other computers and also pick up messages from other computers. Status word residing in shared memory, called semaphore, are used to indicate the condition of the mailbox. Each computer polls unique semaphores associated with unique message transfers when requesting to send a message or to receive a message.

Using N.2 To Model A Microprocessor System, Benjamin J. Patz

Retrospective Theses and Dissertations

Due to the complexity of designing digital systems using VLSI parts, a tool for aiding in system level design specification and verification is needed. Functional level modeling languages and simulators provide that tool. An example of such a tool is the N.2 package of software produced by Endot Inc. and soon to be running on a VAX computer at the University of Central Florida. An overview of the N.2 system is presented in this paper with emphasis on the modeling language of N.2, ISP’. A Small Instruction set Computer (SIC), originally specified in HAPL, is designed with this software using …

The Doctor Of Education In Computer Education An Online Program For Professional Success, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Doctor Of Arts In Information Sciences Brochure 1985, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Center For Computer-Based Learning Doctor Of Arts In Information Science And In Training And Learning, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Master Of Science In Computer-Based Learning Overview, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Doctoral Degree In Computer Education, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Doctor Of Arts In Information Science 1985-86 Catalog, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Comment On “Dielectric Properties Of Lead‐Magnesium Niobate Ceramics”, Jyoti P. Guha

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Design Of A Gold Code Generator For Use In Code Division Multiple Access Communication System, Mark W. Young

Retrospective Theses and Dissertations

A Gold code sequence generator suitable for use in a code division multiple access spread spectrum communication application is designed. A dual, single return shift register configuration is used to generate Gold code sequences. The code sequences are generated by the mod-2 addition of two linear maximal length pseudo-random noise codes, each of which corresponds to a sixth-order primitive polynomial. A computer model of the design is used to generate all 65 possible members of the Gold code sequence family. A tabulation of all sequences and their initial condition “keys” is provided, along with a designation as to which code …

Dipstk-A Process Control Language, Charles C. Strange

Retrospective Theses and Dissertations

Process control languages are generally complex and machine-oriented. Their use requires a high degree of skill, not only in process control knowledge, but also in the programming. On one extreme, control programs are written in assembler language. This is a time-consuming process and the high investment is tailored to a specific application. The resulting programs are difficult to communicate between the programmer and the user. On the other extreme, recent attempts have used high-level languages, i.e., FORTRAN, but these still require assembly-level supplements. In general, only the programmers know what the program does. Thus, a void exists between the programmer …

A Survey Of Microcomputers In Training Devices, Kenneth P. Kelly

Retrospective Theses and Dissertations

This report surveys the use of microcomputers in existing and emerging training devices, with an emphasis on military training devices. Other major purposes of this report are to familiarize the training device designer with the capabilities of the microcomputer and present the designer with the set of issues to consider in determining if a microcomputer could be used in his particular trainer. After providing a description of training devices, this study addresses the definition and capabilities of current microcomputers. Current applications of training devices that utilize both single and multiple, or distributed, microprocessors are given. Next, an overview of the …

An Interactive Training Device Using A Laser Video Disc, Mary C. Bertrand

Retrospective Theses and Dissertations

The goal of this paper is to develop an interactive training system. Although the system developed was used to train tank gunners, the system concepts are generic in that they can be applied to many training scenarios. Applications of computer-based training systems are briefly discussed. The system concepts are defined and hardware and software subsystems are outlined. An architectural overview will precede a detailed discussion of subsystems.

Ipcl1- An Interactive Process Control Language, Richard A. Erlandson

Retrospective Theses and Dissertations

This report documents a Process Control Language. It was written to provide an easy-to-use, user-friendly language to control a manufacturing-type process. It is not assumed the user is proficient or even familiar with any computer languages. The user should be able to grasp the simple set of commands available and begin writing user programs in a short period of time. Emphasis has been placed on error messages to inform the user of the type of error and enough information to correct it. The language was written in PDP-11 assembly language and run on a 11/34 computer in the Microcomputer Laboratory …

Survey Of Fiber Optic Connectors And Cables, John B. Ostlund

Retrospective Theses and Dissertations

Today the world of fiber optics is bigger than ever. What is available to the engineer and the technician is now only apparent to the well informed. Not all engineers and technicians have a background or an education in the field of fiber optics. This report is intended to be an informative preliminary guide to those readers whose interest lies in the field of fiber optics.

The advantages of fiber optic systems are discussed and compared to conventional systems. Although a fiber optic system includes transmitters and receivers, this report concentrates primarily on fiber optic connectors and cables. It also …

A Computer Graphics Head-Up Display For Air-To-Air And Air-To-Ground Flight Simulation, Daryl R. Mair

Retrospective Theses and Dissertations

A computer graphics simulation of an aircraft Head-Up Display was designed using an RDS-3000 Ikonas Graphics Processor and a PDP-11/34 host computer system. The software control and display modules were accomplished using Ikonas microcode and Digital Equipment Corporation Fortran IV-PLUS. The Head-Up Display system consists of the basic flight data, which includes aerodynamic flight information, Roll/Pitch Ladder, and the Velocity Vector or Flight Path Marker. The system was designed for flexibility in modifications and evaluation of various weapons delivery systems. These will be adapted to specific needs by research scientists and engineers at the Visual Technology Research Simulator in Orlando, …

Design And Analysis Of A 4ghz Low Noise Amplifier, Abdulla I. Al-Rawahy

Retrospective Theses and Dissertations

The Gallium Arsenide Field Effect transistor (GaAs FET) is experiencing a widespread acceptance in space and terrestrial systems due to its low noise, high gain and frequency characteristics unmatched by bipolar devices. This paper describes a design of a 4 GHz low noise amplifier with GaAs FETs using the scattering parameters method. Special attention is given to overall noise/gain optimization in the band of interest. The Smith Chart is used extensively to match the two-port device with microstrip networks. Analysis and performance of the amplifier are presented.

Use Of The Ada Language System In Configuration Control Of Fortran-Based Software, Daniel L. Dyke

Retrospective Theses and Dissertations

The Configuration Control and Management of Trainer Systems Software has been recognized as a significant problem for many years. Many software tools are being developed for use as aids in this task. The efforts of the Department of Defense in the development of Ada and an Ada Programming Support Environment (APSE) have strongly addressed the problems of configuration control and management. However, these efforts have been targeted for Ada-based software as it is anticipated it will be the primary language of the DOD. The author feels that FORTRAN based software will require maintenance for many years even after the acceptance …

Computerized Displacement Data Analysis In Laser Speckle Photography, Bijan Chitsaz

Retrospective Theses and Dissertations

Laser speckle photography is an experimental technique which provides a non-contract means for direct measurement of in-plane displacements of objects subjected to different loading conditions. It requires a camera system to record two images of the object that are illuminated with laser light on a high resolution film. The double-exposure film (specklegram) is a permanent record of the displacement information of the object. Point-by-point analysis of the specklegram will yield the displacement data, but requires considerable time to complete the data reduction. An automated data analysis system is developed and described in this report. He-Ne laser and computer-controlled translation stages …

Sintering Of Catio₃ With The Addition Of Caco₃ And Lif, Surapol Pleekram

Masters Theses

"The densification of CaTiO₃ with the addition of 4.74, 5.90, 6.88 mol% CaCO₃ and 22 mol% LiF was investigated over the temperature range 800° to 1050°C, for sintering times ranging from 1 to 216 hours. It was found that CaCO₃ reacts with LiF and to form a liquid at a temperature of about 450°C. This liquid enhances the densification of CaTiO₃ . The densification process was followed by making weight loss, shrinkage and porosity measurements. The microstructural development was determined by scanning electron microscope examination of both fractured and polished surfaces. X-ray diffraction and DTA/TGA were …

Final Design Report Of The Design Of A Climate Controlled Sleeping Chamber For Infants And Toddlers, Jennifer Stenger Stevens

Undergraduate Honors Capstone Projects

A climate controlled sleeping chamber, or air crib, for infants and toddlers is an alternative sleeping medium to the conventional crib. It is a chamber that is ventilated with air that is temperature and humidity controlled to provide an optimum sleeping environment for young children, ages 0 to 2 years. Its purpose is to enhance the psychological and physiological development of young children. Because it is easier to heat a small chamber than larger living quarters, the air crib also has economic advantages.

The design o climate controlled sleeping chamber must meet some minimum requirements. The system must provide an …

Numerical Simulation Of Mixing Processes In Two-Dimensional Channel Flows, Milan Karel Straka

Doctoral Dissertations

"Recently, considerable interest has arisen in the numerical simulation of laminar and turbulent transport phenomena. More knowledge in this field is needed to improve predictions of heat and mass transfer processes in a variety of technical fields.

In this work a new computationally efficient transport model is developed. It consists of partially parabolized time-dependent equations of motion, continuity, and concentration of nonconservative species. Pertinent equations are solved numerically for both laminar and turbulent flow.

Results of calculations of laminar flow in the entry region of a parallel-plate channel agree well with the work of other authors. For turbulent flows, the …

Optimal Regional Potentiometric Surface Design: Least Cost Water Supply/Sustained Groundwater Yield, Richard C. Peralta, Paul J. Killian

Civil and Environmental Engineering Faculty Publications

A distributed parameter groundwater management model utilizing quadratic programming to develop an optimal regional steady-state potentiometric surface and its sustained groundwater withdrawal strategy is presented. It minimizes the regional cost of attempting to satisfy the water needs of each finite-difference cell (a) from groundwater and diverted surface water or (b) from groundwater and reduction of water needs achieved by reducing production acreages. Groundwater elevations, withdrawal and recharge are constrained, satisfying legal and hydrologic constraints. The technique is applicable for assuring a regional sustained yield of groundwater in a conjunctive water management setting. It represents the first application of optimization in …

Preliminary Identification, Analysis, And Classification Of Odor-Causing Mechanisms Influenced By Decreasing Salinity Of The Great Salt Lake, C. Earl Israelsen, Darwin L. Sorensen, Alberta J. Seierstad, Charlotte Brennard

Reports

Introduction: The rising level of the Great Salt Lake has received a great deal of attention because of the resulting physical damage to adjoining properties, threatened distruption of major transportation facilities, and environmental damage to feeding and resting areas for migratory waterfowl. Another problem of growing concern is that some zones of the lake are producing odors that are objectionable to nearby populated areas. These odors are most offensive during the warm summer months and appear to be increasing with the rising levels and decreasing salinity of the lake water. This report presents the approach taken and the findings of …