Digital Commons Network^™

The Use Of Simulation To Evaluate Strategic Aeromedical Evacuation Policy And Planning, Charles W. Wolfe Jr.

Theses and Dissertations

Strategic aeromedical evacuation (AE) of casualties from the theater of operations to the CONUS during wartime is a complex operation that involves the integration of medical personnel and policies with airlift concepts and capabilities. Military analysts within the Air Mobility Command Analysis Group (AMC/XPY) have traditionally used deterministic linear programming techniques to estimate the number of aircraft the United States Air Force (USAF) requires for given contingency scenarios. However, this group has yet to develop a stochastic approach to validate their resource recommendations, and more importantly, to study the interrelationships between key factors comprising strategic aeromedical evacuation. As the possibility …

Smart Memory: An Inexact Content-Addressable Memory, Jack Lee

Dissertations and Theses

The function of a Content-Addressable Memory (CAM) is to efficiently search the information stored in the memory, by using hardware rather than software with a corresponding improvement in searching speed. This hardware allows a parallel search by matching the data stored in memory to a search key rather than sequentially searching address by address as is done in a Random Access Memory. Although existing CAMs are more efficient in finding relevant information than RAM, there are additional improvements that can be made to further improve its efficiency. For example, previous CAMs use a word parallel searching scheme that can only …

Acuta Enews February 1993, Vol. 22, No. 2

ACUTA Newsletters

In This Side

Region Director Nominations

President's column

Institutional Excellence Award

Drew Uinv. Voice Mail

New Publications Editor

Miami Univ. Voice Mail

Tampa Exhibits Review

Executive Director

Bs News

Building Services Engineering

No abstract provided.

Analysis Of The Optimum Extraction System Design For The Separation And Purification Of Rare Earths, Kenneth Yeon-Kang Chan

Dissertations

A mathematical model for the liquid-liquid equilibrium of the lanthanide and yttrium oxides in the nitric acid - water - tributyl phosphate (HNO₃-H₂O-TBP) two-phase system has been developed. This model is based on the interrelationships of chemical reactions, phase equilibrium, and material balance. The chemical reactions were modelled using experimentally derived empirical equations for components involved. The distribution coefficients of 16 rare earths which were experimentally determined. by UK Harwell Laboratory were used to evaluate the parameters of this equilibrium model. Once model parameters are determined, material balance for all species in the HNO₃-H …

Kinematic Synthesis Of Adjustable Four-Bar Mechanisms For Multi-Phase Motion Generation, Shao Jie Wang

Dissertations

A four-bar linkage can satisfy up to five prescribed positions for the motion generation problem. The adjustable four-bar linkage, on the other hand, can satisfy more than five given positions by making some of the parameters adjustable.

Limited work had been done in the area of motion generation problems of kinematic synthesis of adjustable four-bar linkages until Wilhelm introduced the concept of multiple adjustments.

This study considers for the first time, the adjustment of a moving pivot, and the problems of three phases of motion. Various combinations of the number of prescribed positions for the motion generation problems are solved …

Investigation Of The Consumer Electronics Bus, Jaesoo Yang

Dissertations

The objectives of this dissertation are to investigate the performance of the Consumer Electronics Bus (CEBus) and to develop a theoretical formulation of the Carrier Sense Multiple Access with Contention Detection and Contention Resolution (CSMA/CDCR) with three priority classes protocol utilized by the CEBus

A new priority channel assigned multiple access with embedded priority resolution (PAMA/PR) theoretical model is formulated. It incorporates the main features of the CEBus with three priority classes. The analytical results for throughput and delay obtained by this formulation were compared to simulation experiments. A close agreement has been found thus validated both theory and simulation …

On Adaptive Censored Cfar Detection, Loizos Anastasiou Prastitis

Dissertations

In an automatic radar detection system the received signal in every range resolution cell is compared with a threshold to test for the presence of a target. A Neyman-Pearson type test is used which maximizes the probability of detection for a fixed probability of false alarm. For the simple case where the noise is homogeneous a fixed threshold is chosen to achieve the designed constant false alarm rate (CFAR). In the more realistic case the noise background is non-stationary due to clutter and interference. In this situation, the threshold used for testing a particular cell is usually set adaptively using …

Reduction Of Acoustic Feedback Oscillations By Use Of Spectrum Shifting, Youssef Abdelilah

Theses

The problem of whistling noise or self-oscillation in public address systems operating in closed halls or rooms can be very disturbing to the listeners. This noise is sustained when the positive acoustic feedback, of the public address-room system, meets the oscillation criteria. This feedback system results from the acoustic sound signal reflected off the room walls and any other obstacles in the room, originating from the public address speakers and then re-entering the microphone.

When all of the audio signal components entering the public address system are shifted by a frequency increment Δf of 6 Hz, an increase of 5 …

Measures For Estimating The Need For Flexibility In A Manufacturing Facility, Raghu Chilukuri

Theses

Manufacturing technology is in the midst of on-going developments stemming from rapid improvements in machine tools, computers and robots. These developments present engineers with greater challenges and opportunities in designing more complex and productive systems. The concept of flexibility was defined by authors like Jaikumar, Son & Park, and Buzacott. The various challenges can be partly over come by building flexibility into the various systems. Various operational or raw measures are described as they help managers to understand the kind and extent of flexibility embedded in their production process and allow them to make informal judgement on new equipment.

Various …

A Planning Model For Intermodal Auto-Rail Transportation Assignment, Daniel Disario

Theses

This thesis presents a planning model for assigning trips in a corridor served by highways and commuter rail. The underlying assumption is that commuters will choose a mode (or a combination of modes) connecting the origin and destination in a way that will either minimize their individual travel times and costs (the user equilibrium principle) or minimize total system travel time and cost (system optimal principle). The model is structured as a mathematical program with a non-linear objective function and linear constraints.

The model was applied to a case study of the Raritan Valley Corridor located in Northern New Jersey. …

Performance Analysis Of Pyramid Mapping Algorithms For The Hypercube, Jing-Chiou Liou

Theses

Comparative performance analysis of algorithms that map pyramids and multilevel structures onto the hypercube are presented. The pyramid structure is appropriate for low-level and intermediate-level computer vision algorithms. It is not only efficient for the support of both local and global operations but also capable of supporting the implementation of multilevel solvers. Nevertheless, pyramids lack the capability of efficient implementation of the majority of scientific algorithms and their cost may become unacceptably high. On a different horizon, hypercube machines have widely been used in the field of parallel computing due to their small diameter, high degree of fault tolerance, and …

Modal Control Of Flexible Beam Using Smart Mateirals, Sujata Mallepalle

Theses

In this work, the dynamics and control aspects of a vibrating flexible beam using modal analysis are studied. To damp the vibrations of the system, the vibrations of each mode has to he controlled, which can he done if we know the individual mode shape. and the resonance frequency. These quantities can be derived mathematically or measured experimentally with a spectrum analyzer. Individual modal velocities can be computed by integration of the product of beam velocity and the mode shape, over the interval of beam length. The integration is carried out using numerical methods. The necessary discrete ordinates are obtained …

Computer Aided Finite Element Stress Analysis Of A Three Dimension Mandibular Bone Model Using I-Deas Software, Yixiong Xu

Theses

A three dimensional model of half of the mandibular bone, with 487 tetrahedra elements and 1,047 nodes, is established and analyzed by means of I-DEAS software. The masseter muscle is assumed to be 15° deviation from y-axis, and the Umetani boundary conditions are allowed to be varied. A 337 lb force was applied along the midline of the mandible to simulate a trauma force caused by the auto accident. The maximum principal stress is 18,400 psi and the minimum principal stress is -1,340 psi. Depending on the experimental results of dispalcement and maximum principal stress, the conclusions are drawn: 1) …

Translation Of Images On The Hypercube Using Leaf Codes, Bhavesh Patel

Theses

Image processing is used for manipulation of pictorial images. Image analysis applications are typically characterized by the need to process large quantities of image data. Some of the important transformations or operations which are car¬ried out by image processing systems are translation, scaling, superposition and rotation. Algorithms have been developed to carry out these transformations on image regions represented by quadtrees. Gargantini introduced an algorithm to translate an image region represented by a linear quadtree or leafcodes. A linear quadtree is a space efficient data structure used for storing digital images. Ziavras et.al. have proposed a modification of Gargantini's algorithm …

Simulation Study For The Effect Of Dependencies In Queueing Systems, Yitao Bai

Theses

Few theoretical results have been obtained in the literature for the effects of dependencies between random variables on the performance of queueing systems. This thesis aims at investigating this issue via simulation. Several dependencies are studied in detail, including dependencies between interarrival times, between interarrival time and service time, between service times and dependencies between different stages in networks of queues. We define several classes of dependent random variables and study their correlation coefficients, then we apply them to single and multiple station service systems. Comparisons with the independent case, for which the explicit form solution are available, are made …

Timed Petri Net Simulation Of Flexible Manufacturing Systems, Yan Chen

Theses

Standard Petri nets have been used to model and analyze Flexible Manufacturing Systems. The timed Petri net, which can incorporate the time delay associated with manufacturing events, provides additional information about real time behavior of practical systems. The Timed Petri Net Simulation Tool, a highly interactive graphical tool, is applied to simulate the modeled flexible manufacturing systems. Timed Petri net models are experimented with. Machine utilization data and throughput are obtained. Analysis of the results shows that the system performance can be optimized by choosing proper parameters.

A Sign-To-Speech Translation System, Koka Veera Raghava Rao

School of Computing: Dissertations, Theses, and Student Research

This thesis describes sign-to-speech translation using neural networks. Sign language translation is an interesting but difficult problem for which neural network techniques seem promising because of their ability to adjust to the user's hand movements, which is not possible to do by most other techniques. However, even using neural networks and artificial sign languages, the translation is hard, and the best-known system, that of Fels & Hinton (1993), is capable of translating only 66 root words and 203 words including their conjugations. This research improves their results to 790 root signs and 2718 words including their conjugations while preserving a …

Reverse Engineering : An Evaluation Of Contact Technology And Application In Manufacturing Systems, Shailesh V. Jadhav

Theses

There are many instances where one-of-a-kind parts, such as prototypes or custom-built parts, need to be reproduced. When a Computer Aided Design (CAD) of an existing part is not available, reverse engineering is involved in recreation of such part. Currently, geometric measurements from the surface of a prototype are extracted manually and sent to a CAD system. It is typically time consuming, tedious, and potentially a source of error. This study outlines a methodology, for the development of a CAD model, rapid prototype, and subsequently manufacturing of the part. The method developed uses a contact technique to extract 2-D or …

Computer Aided Manufacturing For Production Environment, Biren K. Parikh

Theses

Investments in new technology like Computer Aided Manufacturing (CAM) increased in the past few years because of the foreign competition in the world market as well as on the home ground. Improper investment in CAM and CIM resulted in the "Islands of Automation" instead of an integrated system. These "Islands of Automation" have created new problems for production planning and factory communication.

The objective of the thesis is to develop the methodology to selection and implementation of the CAM system in the production environment. It is to be noted that a CAM system is part of the overall CIM implementation, …

Dynamics Of Ultrashort Pulse Generation And Amplification In Dye Lasers, Shuanghua Jiang

Dissertations and Theses

The dynamics of ultrashort pulse generation and amplification in dye lasers is studied in this dissertation. In particular, we have developed general semiclassical models for ultrashort pulse dye laser amplifiers and oscillators. These models start from Maxwell's equation for the electric field and density matrix equations for the active laser medium. A finite coherence time or phase memory time of the molecular wave functions, a finite vibrational relaxation time for the lower electronic state of the dye laser transition, an isotropic molecular orientational distribution, and an arbitrary pump polarization are all taken into account. Based on these models, specific topics …

Fiber Optic Fabry-Perot Sensors For Smart Structures, Thomas K. Edmondson

Opportunities for Undergraduate Research Experience Program (OURE)

Optical fiber sensors promise to play a large role in the development of smart structures which have the ability to continuously monitor themselves for internal and external structural deformation, and even actively change shape. This investigation studies one such sensor based on a fiber optic Fabry-Perot interferometer, which detects the displacement between two points of a material. Sensor theory and construction are discussed, and the tools used to analyze sensor output are developed. The interferometer is then tested by attaching it to a large cantilever beam which is deflected to produce strain. This experimental data is then used to determine …

Fiber Optic Microdeformation Sensors For Smart Structures, Lawrence S. Criscione

Opportunities for Undergraduate Research Experience Program (OURE)

When optical fibers are stressed, the deformations at the core-cladding interface induce signal attenuation. Because of their durable physical properties (high melting point) optical fibers can be embedded into certain composite materials at the manufacturing stage. Stresses on the composite induces stresses on the embedded fiber. The amount of stress on the fiber, and thus the stress on the composite, can be determined by measuring the attenuation of a signal passing through the fiber. Force was applied to a single mode and a multimode fiber in a microbend inducing plate, and the attenuation this stress created was measured.

Optimizing Energy Usage In A Solar-Powered Vehicle, William R. Macneil

Opportunities for Undergraduate Research Experience Program (OURE)

The University of Missouri - Rolla (UMR) will be entering SUNRAYCE '93 and the World Solar Challenge and expects to excel in these solar-powered car races. Some of the factors involved in winning a race include efficiency, reliability, and high power. All of these are important considerations, but will be ineffective unless appropriately harnessed by a power management scheme appropriate to a race strategy. The power management scheme will be used to efficiently and effectively distribute available power to the car's systems throughout a race day. My goal was to produce a software framework into which the specifications and performance …

Two Methods For Attenuation Of Vibration In Structures, Kevin Mark Mcclendon

Opportunities for Undergraduate Research Experience Program (OURE)

The purpose of this report is to discuss methods of suppressing vibration in space trusses. The discussion is centered on the approach, structural attributes, and effectiveness of each method. One approach uses structural active members which are actuated to produce “anti-vibration” to cancel vibrations in the truss. The other method is to implement passive and active damping devices at the base of the space truss, where it will absorb vibrations by fluctuating the stiffness of the structures foundation.

Cause And Effect Diagrams For Process Analysis And Control, Philip Thomas

Theses

Cause and effect diagrams can be used as an effective tool for identifying the possible causes of a quality problem. Using this diagram one can go deep into the causes of the problem and take proper remedial action. Several graphical techniques like matrix diagrams, systematic diagrams, etc., can be combined with this tool to better represent the cause effect relationships. While a quantitative approach of this technique is feasible but limited, there are useful applications based on qualitative approach to this technique. The objective of this thesis is to propose a quantitative approach to the cause and effect diagrams especially …

Design Of Holographic Optical Interconnections, Su-Chiou Tsay

Theses

Optics have many advantages over electronics in interconnecting systems together, particularly in terms of higher transmission speed and better immunity to noise. Optical interconnections may be used at all levels of computing: for local area networks, between processors or memory elements, and between boards.

In this thesis, we attempted to generate a new type of computer hologram for optical interconnection purposes. The holographic method is very promising whenever integrated optical interconnections are considered. In this research we have tried two designs: the shortest path grating design which can maximize the global output energy and the single input maximum output grating …

Route Fatality Risk As A Measure Of Travel Death Risk, Kopl Halperin, Jim Redman

RISK: Health, Safety & Environment (1990-2002)

The authors examine the route fatality Risk of routes in Erie County, PA and show that some pose a disproportionately high-Risk to users. They argue that transportation safety could be greatly increased by relatively small expenditures and suggest that the most cost-effective Risk amelioration is speed limit control.

Visual Process Language: An Environment That Enhances Inventiveness In The System Development Process -- A Theoretical Perspective, Wita Wojtkowski, Waclaw G. Wojtkowski

IT and Supply Chain Management Faculty Publications and Presentations

This paper provides a theoretical perspective on the effect of computer support on creativity. The assertion is made that artifacts of IS do not substantially differ from those of art and science, and that the creative processes leading to the artifacts are similar. It further proposes that the use of newly available computer technology, specifically, the Visual Process Language (VPL) will have much to offer in terms of augmenting creativity when constructing IS artfacts. We postulate that VPL assists the first insight, preparation and illumination steps of the creative process, and that both Association/Images and Progressive Abstraction techniques are embedded …

The Honor Society Of Agriculture, Gamma Sigma Delta, Nebraska Chapter History, Diamond Jubilee 1918-1993, Charles H. Adams

Gamma Sigma Delta, Nebraska Chapter: Bylaws and Other Documents

GAMMA SIGMA DELTA is a faculty governed society that selects its members from junior and senior students, graduate students, faculty, and alumni for the promotion and recognition of high achievement. While Gamma Sigma Delta is an honor society of agriculture, it may elect members from related fields such as biology, botany, chemistry, economics, entomology, forestry, home economics, plant pathology, sociology, statistics, veterinary medicine, or zoology when the work of the individuals is related to agriculture. Officers, committee chairpersons, and others leading the chapter are faculty or alumni.

EARLY INTERNATIONAL HISTORY

GAMMA SIGMA DELTA INTERNATIONAL OFFICERS FROM THE NEBRASKA CHAPTER

THE …