Digital Commons Network^™

Effects Of Crosstalk On Fidelity In Page-Oriented Volume Holographic Optical Data Storage, Gregory P. Nordin, P. Asthana

Faculty Publications

Using numerical simulation, we quantitatively examine the effects of cross talk on the recall fidelity of stored binary data in a page-oriented volume holographic memory system. We discuss the trade-off between the signal-to-noise ratio of the reconstructed bits and the optical throughput of the system (i.e., the fraction of the incident beam that is diffracted to the detector plane). We show that significant gains in the signal-to-noise ratio can be achieved with modest decreases in optical throughput in the region where the highest throughput occurs. The magnitude of this trade-off is influenced by both beam degeneracy and coherent recording cross …

Measurement Of The Nonsteady Flow Field In The Opening Of A Resonating Cavity Excited By Grazing Flow, Hans R. Graf, William W. Durgin

Office of the Provost Scholarship

Flow past the opening of a cavity can excite acoustic resonance. The periodic velocity field in the region of the cavity opening has been measured for various flow conditions and the vorticity distribution has been computed from the measured data using numerical differentiation. The results indicate that the shear layer rolls up into discreet vortices, which travel across the cavity opening. Two resonances were found. The first is characterized by a single vortex being present and results in the greatest amplitude. The second is characterized by the presence of two vortices which excite a distinct but lesser amplitude resonance. As …

Acuta Enews May 1993, Vol. 22, No. 5

ACUTA Newsletters

In This Issue

Call for Nominations page 2

President's Message page 3

MHEC $aves with Virtual Private Network page 4

Board of Directors Meeting page 5

Tireed Dues page 5

Toll Fraud Takes Aim page 6

Infrastructure page 7

Toll Fraud Checklist page 8

Will My Cellular Phone Fry My Brain? page 9

Executive Director's Message page 11

Weigh Station Bypassing, Herbert F. Southgate, Joseph D. Crabtree, Jerry G. Pigman, Nikiforos Stamatiadis

Kentucky Transportation Center Research Report

A Study was initiated in May of 1990 to investigate the problem of trucks bypassing or avoiding weigh/enforcement stations in Kentucky. A literature review identified two major studies (Wisconsin and Florida) on the subject, both of which are summarized in this report. In addition, a 1989, limited-scope study of truck bypassing of weigh stations in Kentucky was reviewed and summarized.

The primary data collection effort for this study took place in the fall of 1990, centered around the Simpson County enforcement station on Interstate-55. Three potential bypass routes were identified. Automatic vehicle classification (AVC) and weight-in-motion (WIM) equipment was installed …

Bs News

Building Services Engineering

No abstract provided.

Climatic Variability And Dynamics Of Great Salt Lake Hydrology, Taiye B. Sangoyomi

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The time evolution of the Great Salt Lake hydro-climatic system is studied from the perspective of nonlinear dynamics. The dynamics are reconstructed in phase space using the Great Salt Lake volume time series. Important attributes for describing the system are then obtained from the reconstructed space. These include the minimum number of state variables required to describe the system inferred from a determination of the intrinsic dimension, and characterization of the system in terms of linear/nonlinear, and deterministic/stochastic. Other attributes obtained are the dominant modes of behavior of the system, as well as the limit of predictability or information loss, …

Introduction To Electrical Engineering And The Art Of Problem Solving: Volume Ii, P. Frazer Williams

P. F. (Paul Frazer) Williams Publications

These notes were written to accompany a two-semester introductory course in Electrical Engineering. The primary goal of the course is to introduce you to the art of technical problem solving. Conventional Electrical Engineering curricula, in favorable cases at least, produce engineers who are reasonably adept at operating many of the tools important to the field, such as mathematics and circuit analysis. Often, however, these engineers lack skill in choosing which tools to use and in designing a plan of attack to solve problems which are new to them, even though they have all the information and skills needed to fabricate …

Minutes Tractor Test And Power Museum April 14th, 1993, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Use of tractor test building for museum.

Bulletin - Spring #2, 1993, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A sixteen page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Santa Clara Magazine, Volume 35 Number 2, Spring 1993, Santa Clara University

Santa Clara Magazine

9 - HOW SCU ALUMS PUT CLINTON IN THE DRIVER'S SEAT Before there was a President Clinton, there was a long-shot campaign energized by SCU grads. In Ride Around America, White House Press Sec retary Dec Dee Myers '83 details some decisive days on the road to Washington (page 10). Voting the Unthinkable: Why Silicon Valley Got on the Clinton-Gore Bus by Susan Frey describes how Apple's Dave Barram MBA '73 convinced high-tech Republicans to take a chance on Clinton (page 14).

16 - HIV-POSITIVE One of every 250 Americans is infected with the AIDS-causing human immunodeficiency virus. This chilling, …

Bulletin - Spring, 1993, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A sixteen page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 9, Number 4, April 1993, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

An eight page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Cross-Cultural Issues In The Management Of German-Owned Business Subsidiaries In Hampton Roads, Teja Ulrich

Engineering Management & Systems Engineering Theses & Dissertations

'Culture' can be described as patterns of thinking, feeling and acting that distinguish one cultural group from another. Cultural diversity is therefore likely to introduce variety to organizations in which individuals from different national backgrounds are working together. Although this variety bears the potential for an improvement of the cognitive development in the organizations, managers of multicultural business organizations tend to perceive cultural diversity as a disadvantage. This thesis attempts to identify the impact of cultural differences between Germans and Americans on organizations in which German managers work with American employees. German managers of eight business subsidiaries in the Hampton …

An Analysis Of The Response Of A Buckled Beam With Fixed Ends To An Harmonic Base Excitation Using The Finite Element Method, Peter John O'Donoghue

Mechanical & Aerospace Engineering Theses & Dissertations

A finite element formulation is developed to analyze the large deflection vibration of a buckled isotropic beam. The beam is buckled mechanically by an applied end displacement, and the dynamic loading is derived from the forced periodic base motion. The principle of virtual work is used to derive the system equations of motion. A Newton-Raphson iteration routine modified for the case of an applied end displacement is used with the incremental equations of motion to determine static deflection. The 0l time numerical integration algorithm is applied to the system of equations of motion in physical coordinates to determine dynamic response …

A Performance Prediction Model For A Fault-Tolerant Computer During Recovery And Restoration, Rodrigo A. Obando

Electrical & Computer Engineering Theses & Dissertations

The modeling and design of a fault-tolerant multiprocessor system is addressed in this dissertation. In particular, the behavior of the system during recovery and restoration after a fault has occurred is investigated. Given that a multicomputer system is designed using the Algorithm to Architecture To Mapping Model (ATAMM) model, and that a fault (death of a computing resource) occurs during its normal steady-state operation, a model is presented as a viable research tool for predicting the performance bounds of the system during its recovery and restoration phases. Furthermore, the bounds of the performance behavior of the system during this transient …

Robot Force Velocity Control Using Expert System For Control Mode Changes, William R. Doggett

Electrical & Computer Engineering Theses & Dissertations

The most important property of an automated mechanical system is reliable execution of a specified task. Automated mechanical systems work best in precisely structured environments where all operations are repeatable. Typically, these systems are difficult to modify and expensive to install. Sensors can be used to detect disturbances, thus reducing hardware cost by offsetting the need for precise rigid construction components. Sensors, however, increase the complexity and cost of the control software. Efficient methods of reacting to sensor information during automated system operation are required to reduce software complexity and expense.

This thesis analyzes a robotic construction task and describes …

A Sociotechnical Approach To The Study Of Semiautonomous Work Group Communication In Technical Organizations, Elizabeth B. Varnes

Engineering Management & Systems Engineering Theses & Dissertations

The sociotechnical aspects of group communication in semiautonomous technical work teams were investigated to understand how team members define "effective" group communication and what impact technical tools have on the group communication process. A team of workers with various technical backgrounds was selected for study. The study involved videotaped group sessions, a group training educational briefing and individual group member questionnaires. The results indicate that group members believed sharing information among group members was critical to successful communication and that certain technical tools could be effective during group meetings. The findings are congruent with the general theory that group communication …

Bs News

Building Services Engineering

No abstract provided.

Elasto-Plastic Analysis Of Buried Pipelines Subjected To The Large Fault Movement, Luo-Jia Wang

Civil & Environmental Engineering Theses & Dissertations

The responses of buried pipelines subjected to a large fault movement are examined based upon a new non-linear cantilever beam analogy. This analogy assumes that the pipeline in the large deformation zone behaves like a cantilever beam subjected to a transversely concentrated shear at the inflection point and a uniformly distributed soil pressure along the entire span. Tangent modulus approach is adopted to analyze the coupled axial force-bending moment interaction effect on pipeline deformation in the inelastic range. Parametric studies of both tensile and compressive responses of buried pipeline to various fault movements, crossing angles, buried depths, pipe diameters and …

Robust Control Of Nonlinear Multibody Flexible Space Structures, Atul G. Kelkar

Mechanical & Aerospace Engineering Theses & Dissertations

A generic nonlinear math model of a multibody flexible system is developed. Asymptotic stability of such systems using dissipative compensators is established. It is proved that, under certain conditions, this class of systems exhibit global asymptotic stability under dissipative compensation. The dissipative compensators considered are static as well as dynamic dissipative compensators. The stability proofs are based on passivity approaches, Lyapunov methods, as well as a key property of such systems, i.e., skew-symmetricity of certain matrix. The importance of the stability results obtained is that the stability is robust to parametric uncertainties and modeling errors.

For static dissipative compensators, it …

Monolithic Silicon Opto-Electro-Mechanical Light Modulator, Ching-Horng Wu

Theses

A Fabry-Perot light beam modulator of the reflection-type has been designed with process and performance parameters optimized. This design takes advantage of the economies of surface micromaching using silicon substrates and selected thin films. High performance with a low drive voltage are achieved using electrostatic actuation of a thin polysilicon diaphragm. The diaphragm is a novel corrugated structure which has maximum compliance and maintains planarity during actuation. In addition, the corrugationsuspension used provides an improved linearity of amplitude modulation response as a function of the actuation voltage.

A preliminary version of this device has been fabricated through a contract foundry …

Acuta Enews March 1992, Vol. 21, No. 3

ACUTA Newsletters

In This Issue

OSP violators fined

President's column

Non-dominant carriers face tariffs

Resource Manager joins staff

Acuta Enews March 1993, Vol. 22, No. 3

ACUTA Newsletters

In This Issue

CUPA Salary Survey page 2

Presidents Message page 3

Tampa Review: Voice Processing at lU page 4

Tampa Review: Auto Attendants page 7

PBX Toll Fraud Prevention Checklist page 8

Markey Addresses Communications infrastructure page 9

Tampa Review: Voice Processing Partnerships page 10

Executive Director's Message page 11

Luminescence Study Of Ion-Implanted And Mbe-Grown Er-Doped Gaas And AlXGa1-XAs, Jose E. Colon

Theses and Dissertations

The excitation and de-excitation mechanisms of the 1.54 microns emissions, from ion implanted and MBE grown GaAs:Er and Al_xGa_1-xAs:Er, were studied through luminescence experiments. Experimental techniques included photoluminescence, time resolved photoluminescence, and selective excitation photoluminescence. The Er³⁺ emissions were studied as a function of Er concentration, aluminum mole friction, n- and p-type doping level, and annealing temperature. In addition oxygen co-doping studies were done in order to determine the role played by oxygen in the Er³⁺ luminescence.

Rendering The Out-The-Window View For The Afit Virtual Cockpit, W. Dean Mccarty

Theses and Dissertations

The Air Force Institute of Technology (AFIT) is developing a distributed interactive flight simulator, the Virtual Cockpit, using commercial graphics workstations and helmet mounted displays. The Virtual Cockpit communicates with other simulators via local and long-haul networks using the SIMNET protocol. The work reported in this thesis focuses on developing the terrain database for the synthetic environment and on rendering the pilot's view of the database. There are many different file formats for describing 3- dimensional geometric polygonal objects. An analysis of three formats, AFIT GEOM, the Naval Postgraduate School (NPS) DRP, and Software Systems' Flight, is presented. Each file …

Frequency Domain Speech Compression Using The Karhunen-Loeve Transform, Donald W. Dryley

Theses and Dissertations

The purpose of this study was test the influence of phase on the quality of speech reproduced by a speaker dependent compression system. The tests consisted of compressing frequency domain speech vectors using the Karhunen-Loeve Transform, with and without phase, then making subjective judgements as to the reproduced quality. Error Metrics were then tested for their suitability as predictors of reproduced quality. The compression software transformed each speech vector into a vector of complex Fourier coefficients (only half of the coefficients are needed as transform is hermitian). Phase was preserved by using the real frequency components to form one vector …

Using Animation In The Validation Of Simulation Models, Michael L. Carpenter

Theses and Dissertations

This study examined three aspects of animation (movement, color, and detail of icons) to determine which one (or ones) best communicated the operation of a simulation model. The procedure was done in the context of using animation to establish a model's face validity. Movement, color, and detail of icons were looked at individually and in combination. The ability to communicate was measured both subjectively and objectively. The subjective measures were a selection of best and worst animation types where best and worst referred to how well an animation communicated, and a pairwise comparison of the animation types which resulted in …

Predicting The Productive Capacity Of Air Force Aerospace Ground Equipment Personnel Using Aptitude And Experience Measures, Robert S. Faneuff

Theses and Dissertations

This study investigated the effects of mechanical aptitude and job experience on the job performance of 204 Air Force Aerospace Group Equipment (AGE) mechanics. Job performance was expressed as productive capacity (PC), which is derived from estimated performance times on job tasks. PC measures were derived for 50 tasks typically performed by airmen in the specialty. Aptitude measures took the form of Mechanical percentile composite scores on the Armed Services Vocational Aptitude Battery (ASVAB). A second-order logistic model was used to regress PC on aptitude and experience at the task level and at the overall job, or aggregate, level. Model …

Automating The Satellite Range Scheduling Process, Timothy D. Gooley

Theses and Dissertations

Satellite range scheduling is a complex problem that involves scheduling satellite supports in which a satellite and a specific remote tracking station are assigned a time window during which they communicate with each other. As the number and complexity of satellite supports continue to increase, more pressure is placed on the current manual system to efficiently generate a schedule. The objective of this research was to develop a methodology that will automate the generation of the initial 24 hour schedule. The goal of the algorithm developed was to schedule as many conflict free supports as possible. A two phased approach …

Spartan Ii: An Instructional High Resolution Land Combat Model, Edwin H. Harris Jr.

Theses and Dissertations

This project improved SPARTAN, a high resolution land combat model demonstrator. SPARTAN was originally developed as a hands-on trainer for land combat modeling students because there were no models specifically designed to teach the analysts how the models function. SPARTAN is built to demonstrate the techniques used in the current generation of US Army high resolution models. Like the original, the model is primarily a small scale attrition (both direct and indirect fire) model. The model represents 12 soldiers involved in the following processes: target search, target selection, direct fire engagement, indirect fire engagement, movement, reaction to fire, obstacle breaching, …