Digital Commons Network^™

Simulation Modeling Presentations: The Life Cycle, Edward Yellig, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

A typical large scale simulation modeling project spans many months and encompasses activities such as problem definition, data collection, model development, experimentation, and scenario analysis. During the life cycle of a simulation project, numerous presentations are made to many different types of audiences. The purpose of these presentations will vary from seeking project approval, requesting information, discussing simulation model features, verifying the model, validating the model, presenting the experimental results, and offering model conclusions. This paper will discuss presentation techniques we used during a year-long simulation-modeling project. We will highlight techniques used for defining the purpose of each presentation, identifying …

Ultrasonic Enhancement Of Antibiotic Action On Escherichia Coli Biofilms: An In Vivo Model, Andrea M. Rediske, Beverly L. Roeder, Maren K. Brown, Jared L. Nelson, Rachel L. Robison, David O. Draper, G. Bruce Schaalje, Richard A. Robison, William G. Pitt

Faculty Publications

Biofilm infections are a common complication of prosthetic devices in humans. Previous in vitro research has determined that low-frequency ultrasound combined with aminoglycoside antibiotics is an effective method of killing biofilms. We report the development of an in vivo model to determine if ultrasound enhances antibiotic action. Two 24-h-old Escherichia coli (ATCC 10798) biofilms grown on polyethylene disks were implanted subcutaneously on the backs of New Zealand White female rabbits, one on each side of the spine. Low-frequency (28.48-kHz) and low-power-density (100- and 300-mW/cm2) continuous ultrasound treatment was applied for 24 h with and without systemic administration of gentamicin. The …

Graphical Display And Data Structure For Virtual Prototyping, David William Manry

Doctoral Dissertations

One of the goals of engineering firms is to bring better products to market faster. Although concurrent engineering can aid in this endeavor, it requires that all areas of an organization work simultaneously. Thus, current product data must be accessible to everyone.

Virtual prototyping allows this simultaneous exchange of information. Virtual prototyping not only replaces the physical model in product development with a virtual model, but also it goes further by allowing data associated with each part of the model to be accessed. This data is not limited to just geometric properties but could contain other quantifiable properties, such as …

The Use Of Recombinant Human Bone Morphogenetic Protein 2 (Rhbmp-2) To Promote Spinal Fusion In A Nonhuman Primate Anterior Interbody Fusion Model, Brian P. Hecht, Jeffrey S. Fischgrund, Harry N. Harkowitz, Lori Penman, Jeffrey M. Toth, Ali Shirkhoda

Biomedical Engineering Faculty Research and Publications

Study Design. A study on the efficacy of recombinant human bone morphogenetic protein 2 (rhBMP-2) in a nonhuman primate anterior interbody fusion model.

Objectives. To investigate the efficacy of rhBMP-2 with an absorbable collagen sponge carrier to promote spinal fusion in a nonhuman primate anterior interbody fusion model.

Summary of Background Data. RhBMP-2 is an osteoinductive growth factor capable of inducing new bone formation in vivo. Although dosage studies using rhBMP-2 have been performed on species of lower phylogenetic level, they cannot be extrapolated to the primate. Dosage studies on nonhuman primates are essential before proceeding with human primate application. …

Discrimination Of Volcano Activity And Mountain-Associated Waves Using Infrasonic Data And A Backpropagation Neural Network, Fredric M. Ham, Thomas A. Leeney, Heather M. Canady, Joseph C. Wheeler

Electrical Engineering and Computer Science Faculty Publications

An integral part of the Comprehensive Nuclear Test Ban Treaty monitoring is an international infrasonic monitoring network that is capable of detecting and verifying nuclear explosions. Reliable detection of such events must be made from data that may contain other sources of infrasonic phenomena. Infrasonic waves can also result from volcanic eruptions, mountain associated waves, auroral waves, earthquakes, meteors, avalanches, severe weather, quarry blasting, high-speed aircraft, gravity waves, and microbaroms. This paper shows that a feedforward multi-layer neural network discriminator, trained by backpropagation, is capable of distinguishing between two unique infrasonic events recorded from single station recordings with a relatively …

Activated Carbon Produced From Agricultural Residues, Daniel W. Armstrong, V. J. Flanigan, William Joseph James, Jui-Lung Li, Kimber L. Rundlett

Chemistry Faculty Research & Creative Works

A process for producing activated carbon from agricultural residues by heating the residues to a temperature in the range of about 250° C. to about 550° C. to volatilize organic compounds in the residues and to carbonize the residues and further heating to activate the carbonized residues. Activated carbon produced from agricultural residues.

Transgenic Mammals Expressing Human Coagulation Factor Viii , William H. Velander

Department of Chemical and Biomolecular Engineering: Patents

A non-human transgenic mammalian animal, as described above, contains an exogenous double stranded DNA sequence stably integrated into the genome of the animal, which comprises cis-acting regulatory units operably linked to a DNA sequence encoding human Factor VIII protein and a signal peptide, where the cis-acting regulatory units are active in mammary gland cells and the signal peptide is active in directing newly expressed Factor VIII into the milk of the animal. The promoter may be a milk protein promoter such as for whey acidic protein, casein, lactalbumin, or beta-lactoglobulin promoter. The transgenic mammals are preferably farm animals, for example, …

Looking Back: Cyclamate, Allan Mazur, Kevin Jacobson

RISK: Health, Safety & Environment (1990-2002)

The second in a series re-evaluating hazards identified in the 1950s and 60s.

Modeling And Analysis Of Aerial Port Operations, Timothy W. Albrecht

Theses and Dissertations

The focus of this thesis effort is gaining useful insight into aerial port operations by employing an animated simulation. Understanding airfield capacity, resources, and functioning allows greater accuracy and efficiency in both planning for future force structures and matching mobility assets with commanders' objectives. Two current simulations, ACE (Airfield Capacity Estimator) and BRACE (Base Resource Allocation and Capabilities Estimator), model mobility activities at the base level with some deficiencies. The model proposed by this thesis, APOM (Aerial Port Operations Model), will provide the mobility analyst an animated simulation with two, new measures of aerial port operations; a real-time estimate of …

Pilot Inventory Complex Adaptive System (Picas): An Artificial Life Approach To Managing Pilot Retention, Martin P. Gaupp

Theses and Dissertations

The retention of skilled pilots continues to be a problem that plagues the United States Air Force. After spending millions of dollars on training and education, it is disheartening to see the mass exodus of experienced aviators from the Air Force that has been occurring in the past decade. Many blame the economy, others the Air Force itself but few are able to accurately predict how or why they are all leaving. The current personnel models do not adequately determine retention rates. Complex adaptive systems theory, however, might provide some insight. By modeling the system at the pilot's level, allowing …

Unmanned Aerial Vehicle Mission Level Simulation, Jennifer G. Walston

Theses and Dissertations

We develop an object-oriented simulation that models the surveillance and Active Suppression of Enemy Air Defense (SEAD) missions of the Unmanned Aerial Vehicle (UAV) RQ-1A Predator. The simulation, written in Java using the Silk simulation package, interfaces with a Reactive Tabu Search routing algorithm to provide optimal UAV routes. The routing algorithm is called by the simulation to account for changes in weather conditions and to provide a means of dynamically retasking the UAV. The simulation and analysis support a UAV Battlelab initiative to test the operational effects of proposed changes in Predator performance and UAV capability to perform in …

Resolving Problems In Engineering Ethics: Precept And Example, Joel C. Adair

Theses and Dissertations

This thesis has served to accomplish several objectives. First, a foundation was laid for the consideration of ethical factors in an engineering context. This was done by first establishing the need for ethical judgement in the engineering disciplines. A summary of several significant classical ethical theories followed, providing several tools with which to evaluate decisions that have ethical implications. Finally, the conclusion was made that the best framework for making ethical decisions is found in the application of the virtues espoused by the gospel of Jesus Christ.

Simsat: A Satellite System Simulator And Experimental Test Bed For Air Force Research, James E. Colebank, R. Dan Jones, Randall D. Pollak, Donald M. Mannebach, George R. Nagy

Theses and Dissertations

SIMSAT (the SIMulation SATellite) is an AFIT-sponsored program to develop a laboratory-based physical satellite simulator. SIMSAT supports experimentation in areas of attitude control, precision pointing, and vibration suppression. SIMSAT development began with the purchase of a three-axis gas bearing which simulates a torque-free space environment. SIMSAT subsystems provide power, attitude control, telemetry, and structural support to experimental payloads. Project challenges included integration of attitude control software/hardware, high-output power storage devices, remote communications, high-frequency data collection, structural design, and computer display outputs.

An Evaluation And Comparison Of The Ace And Brace Airfield Models, David W. Wiliams

Theses and Dissertations

Airfields are a critical aspect of our military's ability to project power or respond to crises throughout the world. It is crucial that mobility planners have an effective means to estimate the capacity of these airfields. The objective of this research is to examine common mobility metrics and evaluate existing means of measuring them. Currently, Air Mobility Command has two models, the Airfield Capacity Estimator (ACE) and the Base Resource and Capabilities Estimator (BRACE), that were designed to estimate the resource requirements and capacities of an airfield. This study offers a critical evaluation and comparison of the two models. Discrepancies …

Combustion Properties Of Biomass, B. M. Jenkins, Larry Lin Baxter 8507091, T. R. Miles Jr, T. R. Miles

Faculty Publications

Properties of biomass relevant to combustion are briefly reviewed. The compositions of biomass among fuel types are variable, especially with respect to inorganic constituents important to the critical problems of fouling and slagging. Alkali and alkaline earth metals, in combination with other fuel elements such as silica and sulfur, and facilitated by the presence of chlorine, are responsible for many undesirable reactions in combustion furnaces and power boilers. Reductions in the concentrations of alkali metals and chlorine, created by leaching the elements from the fuel with water, yield remarkable improvements in ash fusion temperatures and confirm much of what is …

Crop Updates 1999 - Lupins, Greg Shea, Geoff Thomas, Mark Sweetingham, Bill O'Neill, Wallace Cowling, Bevan Buirchell, Hua'an Yang, David Luckett, Allan Brown, John Hamblin, Joanne E. Barton, Kedar Adhikari, Nick Galwey, Miles Dracup, Bob French, Debbie Thackray, Roger Jones, Brenda Coutts, Narelle Reeve, Y. Cheng, R. A.C. Jones, Francoise Berlandier, Linnet Cartwright, James Fisher, Art Diggle, Bill Bowden, Chris Gazey, Luigi Morsechi, Terry Piper, Peter Newman, Dave Nicholsen, Mohammad Amjad, Glen Riethmuller, Ron Javis, Paul Blackwell, C. L. White

Crop Updates

This article contains twenty three papers

1998 LUPIN HIGHLIGHTS

LUPIN ANTHRACNOSE

1. Anthracnose overview, Greg Shea, Geoff Thomas and Mark Sweetingham, Agriculture Western Australia

2. Anthracnose – Critical seed infection levels for resistant and susceptible varieties, Geoff Thomas, Mark Sweetingham, Bill O'Neill and Greg Shea, Agriculture

Western Australia

3. Fungicide seed treatment for anthracnose and brown spot control in lupin, G. Thomas and M. Sweetingham, Agriculture Western Australia

LUPIN BREEDING AND AGRONOMY

4. Anthracnose resistance in lupins – an innovative Australian research effort 1996-1998, Wallace Cowling1'2, Bevan Buirchell_1,2 Mark Sweetinqham_1,2, Hua'an Yang₂, …

A Mutant Of Chlamydomonas Reinhardtii With Reduced Rate Of Photorespiration, Kensaku Suzuki, Tarlan G. Mamedov, Toraoyoshi Ikawa

Papers in Biochemical Engineering

Photorespiration rates under air-equilibrated conditions (0.04% CO₂ and 21% O₂) were measured in Chlamydomonas reinhardtii wild-type 2137, a phosphoglycolate-phosphatase-deficient (pgpl) mutant and a suppressor double mutant (7FR2N) derived from the pgpl mutant. In both cells grown under 5% CO₂ and adapted air for 24 h in the suppressor double mutant, the maximal rate of photorespiration (phosphoglycolate synthesis) was only about half of that in either the wild type or the pgpl mutant (18-7F) cells. In the progeny, the reduced rate of photorespiration was accompanied by increased photosynthetic affinity for inorganic carbon and the capacity for growth …

Ventilation System Design Parameters For Greenhouses For Tobacco Production, R. S. Gates, George A. Duncan

Agricultural Engineering Extension Updates

Methods for germination and initial growth of tobacco have changed rapidly in recent years, moving from outside float beds into double-layer plastic greenhouses. Typically, these "tobacco greenhouses" consist of sidewall curtains, which run the entire length of both sides of the house. They may also have modest mechanical ventilation.

Ventilation of greenhouse structures is a mature field, with engineering practices for proper design given by numerous organizations including ASAE. In this article we briefly outline the important features of ventilation of concern to tobacco greenhouse operators.

Truck Route Access Evaluation: Tyson Foods, Henderson County, Site #2684, Kenneth R. Agent, Brian Aldridge, Lisa Aultman-Hall, David Cain, Nikiforos Stamatiadis, Joel M. Weber

Kentucky Transportation Center Research Report

The Freight Movement and Intermodal Access in Kentucky Study (SPR 98-189) is being conducted by the Kentucky Transportation Center on behalf of the Kentucky Transportation Cabinet (KYTC). There are two major objectives of the study: evaluation of the access for trucks between intermodal or other truck generating sites and the National Highway System (NHS); and furthering the understanding of freight commodity flows throughout the state. This report summarizes the access evaluation for several facilities located in Henderson County in the Green River Area Development District (ADD) and KYTC Highway District #2. The location of the site is shown in Figure …

Bovine Follicular Dynamics, Oocyte Recovery,And Development Of Oocytes Microinjected With A Green Fluorescent Protein Construct, M S. Chauhan, S Nadir, T L. Bailey, A W. Pryor, S P. Butler, D R. Notter, William H. Velander, F C. Gwazdauskas

Papers in Biotechnology

The present study was carried out to 1) evaluate the viability of in vitro fertilized zygotes after microinjection of DNA, 2) assess the influence of oocyte quality upon the development rate of embryos when injected with DNA, and 3) determine the integration frequency of green fluorescent protein DNA into microinjected embryos. Oocytes were aspirated from ovaries of nine nonlactating Holsteins and were categorized into grades A, B, C, and D. At 16 h after in vitro fertilization, approximately half of the pronuclear stage presumptive zygotes were classified as having 1 pronucleus or 2 pronuclei, and they were microinjected with DNA …

System Simulation And Modeling Of Electronics Demanufacturing Facilities, Ketan Giridhar Limaye

Theses

Over the last decade, pressure on the electronic industry has been increasing as concerns for product take-back, product stewardship and global warming have continued to grow. Various end-of-life management options are being expanded including recycling to recapture values from basic materials through reengineering and recovery of subassemblies and individual components for remanufacturing. While progress has been reported on life cycle assessment (LCA), disassembly planning, design for disassembly, and design for environment (DFE), very little research has been focused on demanufacturing from a systems perspective.

The objective of this thesis is to build an interface between the user who knows the …

A Field Study Coupling Soil Fractionation And Sonic Energy For Enhancing The In Situ Removal Of Volatile Organic Compounds In The Vadose Zone, Hassan Kaleem

Theses

Remediation of sites contaminated with hazardous wastes could be an expensive endeavor. There is, therefore, the need to explore techniques, which can reduce the remediation time and achieve regulatory specifications, thus reducing the cost involved in a site remediation exercise.

In this work, we investigated the use of sonic energy to enhance the in situ removal rate of trichloroethylene and dichloroethylene from a site in Hillsborough Township. New Jersey. The experiments were performed with and without sonic energy and each time the concentration of the trichloroethylene swept out from the site and the flowrate of the effluent gas were measured. …

Jan 1999, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Museum Open House Officer Elections UN Museum

The Role Of Surface Roughness For Implant Incorporation In Bone, A. Wennerberg

Cells and Materials

A careful topographical characterization is important for reliable interpretation of the role of implant surface roughness in bone incorporation. In this paper, the currently available measuring instruments and evaluation techniques are described and discussed first, than literature on the role of surface roughness for cell and bone tissue reactions in vitro and, with special emphasis, the in vivo studies are reviewed. Finally, the results from a series of the authors own animal studies evaluating screw-shaped implants with different surface roughnesses are summarized. The results demonstrated firmer bone fixation for blasted implants than for turned ones. A blasted surface with an …

Preliminary In Vivo Studies Of A New Injectable Bone Substitute, F. Millot, G. Grimandi, P. Weiss, G. Daculsi

Cells and Materials

Calcium-phosphate materials have been increasingly employed in orthopedic and dental applications in recent years and are now being developed for use in noninvasive surgery or as carriers for drug delivery systems. We developed an injectable bone substitute (IBS) for percutaneous orthopedic surgery which uses a biphasic calcium-phosphate (BCP) mixture composed of hydroxyapatite (60%) and ß-tricalcium phosphate (40%), together with a polymer (hydroxy-propyl-methyl-cellulose, HPMC) as a carrier. The best BCP/polymer ratio was determined to achieve the highest mineral phase in the composite and provide the rheological properties required for injectable material.

The in vivo biocompatibility and biofunctionality of IBS were …

Problems Of Irrigation In Developing Countries, Phillip Z. Kirpich, Dorota Z. Haman, Stuart W. Styles

BioResource and Agricultural Engineering

This paper describes the crucial importance of irrigated agriculture to developing countries and to the world as a whole. This is followed by a summary of key problems that restrict and diminish the benefits of irrigated agriculture. Solution of these problems will above all require a holistic approach and will require changes in the institutions involved. These institutions include those of the developing countries, of the developed countries that provide aid, and of the international financing and technical-assistance agencies. Engineers in the developed countries have had, and will continue to have, a leading role but will need some redirection. ASCE …

Report Of The Poplar Working Group, Steve Strauss

United States Department of Energy: Publications

Poplars consist of all species of the genus Populus, including cottonwoods, aspens, and the many interspecies hybrids in common use (Dickmann and Stuart 1983). Our working group focused on the fungal pathogens, arthropod herbivores, and weed competitors of Populus in the United States. However, bacterial and viral diseases of Populus are significant in Europe, and genetic engineering approaches toward their control or management are being studied. The key aspects of poplar biology important to understanding the use of pest resistance genes are described below.

Practical Hints For The Layout And Construction Of 10,000 M3 Circular Dams, Terry Babbington, J S. Addison

Bulletins 4000 -

These notes and illustrations have been compiled to assist earthmovers in the construction of circular excavated earth tank dams, with pipe inlets. Construction techniques tend to evolve over time, so the methods described in this publication will not be definitive, but, they may improve efficiency of construction in the interim. Although the example used in these notes refers to 10,000 m3 dams, the construction techniques, using a bulldozer, described here equally apply to dams of any volume of similar design. Only dimensions will vary. earthmovers using a scarper together with a bulldozer should be able to extract useful information from …

Remedy Selection For Cleanup Of Uncontrolled Waste Sites, Paul D. Bennett, Brad Brumbach, Tyrone W. Farmer, Preston L. Funkhouser Iv, Allen W. Hatheway

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Selection of remedy for uncontrolled hazardous waste sites involves comparisons of various technological approaches for minimization of threats and achievement of cleanup action levels. Approaches specified in the Comprehensive Environmental Response, Compensation and Liability Act (SUPERFUND Law) National Contingency Plan (40 CFR 300) are broadly labeled as actions, alternatives, and technologies. We have found considerable perplexity in denoting the rank-hierarchy of these approaches and have developed a classification system for dealing with the totality of available measures for consideration in selection of remedy.

Kentucky Traffic Accident Facts 1999 Report, Kentucky Transportation Center, Kentucky State Police

Kentucky Transportation Center Research Report

KENTUCKY’S TRAFFIC ACCIDENT FACTS report for 1999 is based on accident reports submitted to the Accident Unit housed in the Kentucky State Police Information Services Branch, Records Section. As required by Kentucky Revised statutes 189.635, “every law enforcement agency whose officers investigate a vehicle accident of which a report must be made...shall file a report of the accident...within ten days after investigation of the accident upon forms supplied by the bureau.” The stated purpose of this requirement is to utilize data on traffic accidents” for such purposes as will improve the traffic safety program in the Commonwealth.” Data contained in …