Digital Commons Network^™

Optimal Synthesis Of Active Distributed Rc Low-Pass Filters, Robert Iman Egbert

Masters Theses

"Although synthesis procedures for active distributed RC networks are well developed, the approximation problem is largely unsolved. Previously proposed solutions have several disadvantages. A better solution to the approximation problem is obtained by developing an error expression involving the difference between the ideal specification and the exact realization, then minimizing this error by numerical techniques. The method is illustrated by designing a set of active distributed RC low-pass filters"--Abstract, page ii.

Nutation Control During Precession Of A Spin-Stabilized Spacecraft, Richard James Donner

Masters Theses

"The effects of precession thrust pulses and energy dissipation upon nutation of a spin-stabilized spacecraft are studied. Methods for controlling nutation during a precession maneuver are proposed and examined. In particular, a precession modulation control law is developed which uses precession thrust pulses to control nutation. Digital simulations show that precession control with separate nutation control is the fastest precessing system; however, the precession modulation method is only fractionally slower while not requiring a separate nutation control system"--Abstract, page ii.

A Travelling-Wave Transistor Amplifier, Manit Kovintha

Masters Theses

"This thesis discusses a steady-state analysis and design of a coupled uniform travelling-wave transistor amplifier. A solution to the problem is given in closed form and a numerical method for evaluating the solution is discussed.

Practical line parameters and different terminations are used in frequency response calculations. The amplifier power gain variations due to parameter variations are considered and shown in full"--Abstract, page ii.

A Formal Description Of The Nova-800 Computer In Computer Design Language, Ronald Lee Engelbrecht

Masters Theses

"This paper presents a formal description of the operation of the NOVA 800 in Computer Design Language (CDL). For simplicity, the description does not include specific input/output devices, the multiply/divide option, or data channel operations. The description is intended to be used as a supplement in a basic course in computer organization, and an example of its use is included"--Abstract, page ii.

A Study Of The Measurement Of Noise Power, Larry Smith Heflin

Masters Theses

"In order to compute a power signal-to-noise ratio in the numerical simulation of a communication system, it is necessary to measure the power of the noise present. The required integration can be approximated by many numerical techniques. Five numerical integration methods are available in the user-oriented System/360 Continuous System Modeling Program. Measurements of the power of an additive Gaussian noise waveform are performed, and an analysis of the accuracy of the measurement compared to theoretical values is presented"--Abstract, page ii.

Analysis And Design For Semi-Automatic And Automatic Control Of Vehicles By Permanent Magnets, Hari K. Mehta

Masters Theses

"The analysis and design carried out in this study relates to automatic or semi-automatic lateral control of a vehicle. This is one of the three essential subsystems needed for a complete automatic control system. The other two subsystems provide longitudinal control, and intersection or lane-changing control.

The system studied employs a series of permanent magnets which have been embedded vertically in the road and spaced at an interval to be used for position reference, leading to discontinuous error signal. This system has been analyzed by classical Z-transform analysis and control models have been developed for two kinds of controls. First, …

Performance Degradation Due To Specular Multipath Intersymbol Interference, G. H. Smith, David R. Cunningham, Rodger E. Ziemer

Electrical and Computer Engineering Faculty Research & Creative Works

Plots of performance degradation are used to compare the effects of fading and intersymbol interference in a two-component specular multipath digital communications channel. Similar plots are then used to compare two practical receivers designed to combat the interference. Degradation plots are shown to allow easy identification of each receiver's range of usefulness, as well as identification of variance bounds demanded of channel parameter estimates which the receivers require. Copyright © 1973 by The Institute of Electrical and Electronics Engineers, Inc.

An Improved Single Flight Technique For Radar Stereo, Gordon E. Carlson

Electrical and Computer Engineering Faculty Research & Creative Works

An improved technique for obtaining stereo radar image pairs is described. The technique uses a unique combination of two different radar beam pattern characteristics. The resulting stereo radar images are illuminated from very nearly the same aircraft position which results in radar shadow and back-scatter characteristics which are very similar and in improved image registration possibilities. The reduction in illumination angle and aircraft position differences is shown to be nearly an order of magnitude or more when compared with a previously proposed single flight technique which used two vertical fan beam patterns at different azimuth angles. As a related sidelight …

Considerations In The Design Of A Network Of Minicomputers, Hardy J. Pottinger

Doctoral Dissertations

"The advantages of a network consisting of a number of minicomputers coupled to a large time shared computer are described. This type of network is very useful in the areas of data acquisition, real time control of experiments, and front-end processing for computer graphics.

Problems associated with the development of a network of this type, various possible solutions, and the trade-offs involved are presented. These problems are classified into two categories: the interface between the network and the central computing facility, and the interface between the remote sites and the rest of the network.

The design constraints, rationale, and implementation …

Tilt-Table Alignment For Inertial-Platform Maintenance Without A Surveyed Site, Gordon E. Carlson, Max E. Bott

Electrical and Computer Engineering Faculty Research & Creative Works

A method for aligning the rotary tilt table for an inertial-platform maintenance facility without surveying the site is analyzed and evaluated. The method utilizes multiple measurements of the tilt-table azimuth alignment error with different inertial platforms to determine a best estimate of the alignment error. Error analysis indicates that useful facility performance can be obtained with only a small number of measurements. The tilt-table alignment accuracy can be improved as more measurements of the alignment error are made during normal facility operation. © 1973, IEEE. All rights reserved.

Parameter Identification Applied To Linear Quadratic Differential Games, John D. Corrigan

Doctoral Dissertations

"A two player zero-sum linear quadratic differential game is investigated for the case in which one of the players has incomplete a priori knowledge of the parameters of his opponent's dynamic system. This incomplete system parameter information game is shown to be playable since the ignorant player can make limiting estimates of the unknown parameters from the relative controllability condition for the game. Performance from the ignorant player's point of view is suboptimal.

It is also shown that parameter identification techniques can be applied by the ignorant player in order to directly identify the smart player's closed-loop parameters in the …

A Thin Film Evaporator Rate Controller, Daniel Robert Kasterlein

Masters Theses

"A circuit is described which is used to control the evaporation rate of material from a resistance heated boat or electron beam evaporator. The rate controller is used in conjunction with a quartz crystal thickness monitor in a vacuum evaporator"--Abstract, page ii.

Design Of An Analog-Temperature Control System For An Expansion Cloud Chamber, Andrew C. Tebelak

Masters Theses

"This thesis describes the design, construction, and application of an analog control system for the temperature control of an expansion cloud chamber. During the expansion, the sample gas and the chamber walls are cooled at the same rate so as to maintain adiabaticity. The control system measures the wall temperature with transistor temperature sensors, calculates the gas temperature from the gas pressure using the adiabatic gas law, and generates a control signal proportional to their difference. The control precision is sufficient to allow the chamber to be used in the study of atmospheric phenomena.

The chamber is a ten-sided right …

A Suboptimal Control Law For Parametrically Disturbed Linear Systems And Its Application To Improve The Transient Stability Of Power Systems, Atluri Bhima Ranjit Kumar

Masters Theses

Paper 1: “A suboptimal linear control law is synthesized for parametrically disturbed linear systems, and the necessary approximation for applying the law to a class of nonlinear systems is given. The law is then extended to linear systems with stochastically disturbed parameters by using appropriate approximations”—Abstract, page 2.

Paper 2: “The application of optimal control theory to damp the electromechanical oscillations associated with the transient conditions in power systems has been given little attention. A suboptimal control law which minimizes the sum of the performance indices of the two linear systems given by a piecewise linear model of a power …

The Static Nonequilibrium Characteristics Of Planar Germanium Probes In A Slightly Ionized Hydrogen Plasma For Low Injections, Alfred Gene Williams

Masters Theses

"The theory for a planar semiconductor probe in a slightly ionized gas with small dc current densities is developed for a germanium probe immersed in a hydrogen plasma. First, the equilibrium characteristics due to the probe in the plasma are developed from Poisson's equation and current density equations. Then, the static nonequilibrium characteristics due to the probe are found by perturbing the equilibrium characteristics and substituting the perturbation terms into Poisson's equation and current density equations. The total current, I, is found to vary linearly with the applied voltages, V, and the ratios I/V are essentially the same for both …

A Multivariable Sampled-Data Model Of An Automobile Driver, Jose A. Bermudez

Masters Theses

"In this thesis, a multivariable system model of driver performance in the basic driving tasks is presented. The driver model described acts as a serial-process, priority-accessed, time-sharing computer. This model processes the input or output task which currently possesses the highest priority. Input tasks are represented by continuous signals sampled intermittently according to priority laws. Output tasks are modeled as simple analog processes operating on the last few intermittently generated output controls. An individual priority rule is constructed for each input and output task.

The performance of the driver in the lateral control task involves a feedforward pattern which is …

A Study Of Rf Induction Heating And Float Zone Refining Of Silicon, John Allen Reynolds

Masters Theses

"Float zone refining using simultaneous RF induction heating and electromagnetic levitation has proven to be the best technique for producing high purity silicon for the semiconductor industry.

A study of the power requirements for floating molten zones, of load to source impedance matching, and of considerations for RF heating coil design was conducted to determine possible methods of improving the technique. It is shown that the power requirements are within reason, that impedance matching can be improved by varying network parameters, and that certain vital items must be assured in the design of different RF heating coils.

It is believed …

Design And Construction Of An Electronic Pressure Altimeter For An Atmospheric Data Acquisition System, Larry Wayne Berkbigler

Masters Theses

"This thesis describes the design, construction, and application of an altimeter which was developed as part of the data acquisition system of a small aircraft used to study atmospheric conditions. The altimeter provides a digital readout and interfaces with analog and digital recorders. It can also provide an audio indication when a predetermined altitude is reached. The altimeter is powered by 12 volts dc, has resolution to 10 feet, and a maximum altitude of 15,000 feet. Its maximum theoretical error is ±78 feet ±0.77% of true altitude, which is an error of ±194 feet at 15,000 feet.

Since the unit …

An Accurate Digital Instrument To Measure Reactor Period, Ernest W. Scott, Paul D. Stigall

Electrical and Computer Engineering Faculty Research & Creative Works

At Facilities Having a Research-Training Reactor, such as the University of Missouri-Rolla Reactor (UMRR), One Finds It Necessary to Perform a Large Number of Rod Calibrations during the Course of the Year. in Practice Rod Worths Are Determined by Measuring the Reactor Period Created by an Incremental Withdrawal of the Rod under Calibration. Period is Then Related to Reactivity Thru the Use of a Publication Such as the AEC Publication, ID016485. This Frequent Measurement of Period Makes It Desirable to Have a Simple, Automatic and Accurate Method to Make Such Measurements. at UMRR We Have Designed, Constructed and Installed Such …

Design And Operation Of A Microprogrammed Branch Driver For A Pdp-11 Computer., Lavon R. Biswell

Electrical and Computer Engineering ETDs

A Microprogramned Branch Driver (MBD) is the interface between Digital Equipment Corporation (DEC) PDP-11 series computers and a multicrate CAMAC system. The MBD is a microprocessor-controlled multiple, direct memory access (DMA) channel branch driver.

The requirements for an MBD are discussed in the introduction and stem from a Los Alamos Scientific Laboratory (LASL) study group report on the design of the Clinton P. Anderson Meson Physics Facility (LAMPF) data acquisition system. Because of the desire for the standard system, the types of experiments and data rates, and the varying complexity of the data acquisition systems, it was decided that a …

Device Fabrication And Radiation Effects Studies Of Various Semiconductors., Tong Won Kim

Electrical and Computer Engineering ETDs

High mobility indium antimonide thin films were prepared using the electron-beam evaporation technique to permit study of thin-film structure and formation. Thin-film Hall devices and magnetoresistors were fabricated, and electron and stable fast neutron radiation effects on InSb films were studied. Gallium arsenide phosphide (GaAsP) and silicon MIS capacitors were fabricated by using aluminum oxide (Al0) and silicone oxide (SiO ). Tellurium thin-film transistors (TFTs) were also fabricated using electron-beam evaporated Al2o3 or the anodization of aluminum. The device stability was studied before and after thermal annealing in different gases.

Physical properties of InSb compound semiconductors were studied to gain …

Reducing Uncertainty, Richard C. Heyser

Unpublished Writings

Intended for audio engineers, Richard C. Heyser meant for this paper to bring attention to the misapplication of the theoretical concept, the Uncertainty Principle. Heyser argues that this concept has been "freely applied without regard to the errors which may result due to lack of understanding of its derivation."

An Investigation Of The Neuromuscular Command In The Control Of Respiration, Nirmal Kumar Mishra

Dissertations

The purpose of the investigation is to study the signals involved in the respiratory system and to obtain a model for the dynamics including the activity of the phrenic nerve as the input and the transpulmonary pressure, air flow and the volume as the response.

Experiments were done on anasthetized dogs under natural breathing, with steady state response to various levels of CO2 in the inspired air, and under electrophrenic stimulation. Bipolar electrodes were used at the phrenic nerve, in the cervical region, either for recording the phrenic neurogram or for supramaximal unilateral (or bilateral) stimulation using pulse frequency modulated …

Intense Relativistic Charged Particle Beam Transport Phenomena In Vacuum, Alan Michael Chodor

Electrical and Computer Engineering ETDs

The purpose of this report is to investigate the nature of propagation processes for intense, relativistic charged particle beams in vacuum. Three areas of the problem are studied. The first subject, envelope optics, includes a formal development of the envelope equations and consideration of this approach as a device of approximation. Secondly, assuming laminar behavior, the entire beam is modeled in a closed set of partial differential equations in configuration space. A general study of this condition emphasizes invariants of laminar flow and geometric scaling. Finally, the coupled beam-field equations are solved exactly for several special cases. The optical properties …

Polarization Of Infrared Waves Due To Propagation Through The Atmosphere, J. Philip Castillo

Electrical and Computer Engineering ETDs

This study presents an investigation of the polarization of infrared waves due to propagation through the atmosphere. Cumulus cloud and Haze M particle size distributions are considered for various optical depths at wavelengths of 4.0 and 10.0µ. Results at these wavelengths are compared to results at a wavelength of 0.5µ for the same physical atmosphere. Initially the radiative transfer integral equations are derived which include the Stokes polarization vector. From these integral equations a Monte Carlo simulation technique is used to simulate photon histories through the atmosphere. The effects of multiple scattering on the polarization state of the scattered intensity …

Photo And Magnetic Gated Bi-Directional Counter, Charles Burdette Kraemer

Graduate Research Papers

The purpose of this study is to investigate digital counter circuitry, digital logic, and some special applications of digital display systems. The technical data and information ascertained from the research will be used to design and develop a four-digital counter with photo and magnetic gated inputs.

Electrical Wiring For Lower-Cost Housing, Burns E. Hegler

International Symposia on Low Cost Housing Problems

No abstract provided.

Digital Video Display System Using Cathode-Ray Tube, George M. Low, Arthur I. Zygielbaum, Warren L. Martin, Alexander Engel

School of Natural Resources: Faculty Publications

A digital video display system (DWDS) is disclosed for display of image, alphanumeric and other data on a cathode-ray tube (CRT) with sequential raster scan and two, four or eight gray shades. The DVDS includes a central processing unit for ac tivating the system, selecting the X (horizontal axis) and Z (in tensity modulation) modes, and designating the starting loca tion of two successive rasters of data from a memory accessed by a data multiplexer subsystem (DMS). At the end of each raster, the DMS interrupts the computer for a new starting lo cation of a raster of data to …

Application Of Numerical Analysis To Root Locus Design Of Feedback Control Systems, Steve William Justice

Dissertations and Theses

Many practical problems in the field of engineering become so complex that they may be effectively solved only with the aid of a computer. An effective solution depends on the use of an efficient algorithm. Plotting root locus diagrams is such a problem. This thesis presents such an algorithm.

Root locus design of feedback control systems is a very powerful tool. Stability of systems under the influence of variables can be easily determined from the root locus diagram. For even moderately complex systems of the type found in practical applications, determination of the locus is extremely difficult if accuracy is …

The Effect And Compensation Of Time-Base Perturbations In Analog Recording Systems, Clifford D. Skouby

Doctoral Dissertations

"The mean square error between recorded and reproduced signals is used as an error measure to determine the effects of time-base perturbations on an analog singal. The mean square error caused by time-base perturbations is shown to be proportional to the product of the square of the signal bandwidth and the time-base error variance for the case of low pass signal. When the signal is band pass, there is shown to be an additional error term which is proportional to the square of the signal center frequency and the time-base error variance.

Calculations are also carried out to determine the …