Digital Commons Network^™

The Design And Construction Of An Electronic D-C Analog Computer, Frederick R. Wagner, William A. Paar

Masters Theses

"To make this project realizable with the funds available and in the time allowed, and to set forth some definite goals, the following objectives were adopted:

1. Design, construct, and place in working order a d-c electronic analog computer capable of solving 4th order linear differential equations with constant coefficients.
2. Include in the design provisions for real time computation, and also fast, repetitive operation.
3. Provide for later expansion of the computer installation.
4. Limit expenditures to $700"--Introduction, page 4.

A.C. Circuit Interruption, Palmer L. Anthony Jr.

Masters Theses

"In the last few years the transmission voltages have increased tremendously. Along with the voltage increase came increased load carrying ability for the circuits. The first few links of a new 330 KV transmission system are now under construction in this country. Sweden is already operating a 380 KV line. It is expected to carry a load as high as 850,000 KW on a single circuit.

Interconnection between systems in adjoining areas is a practice to get further operating benefits. The benefits are - reduction of necessary reserve capacity, increased load diversity, and decreasing losses.

Both of these developments bring …

Clipper Amplitude Modulator, Durmuş Öcal

Masters Theses

"An amplitude modulated wave is defined as a wave form in which the amplitude of a sinusoidal signal (carrier) is varied in accordance with a modulating signal whose frequency is much lower than the frequency of the carrier signal. Numerous devices have been found for generating an amplitude modulated wave. In some modulators the amplitude of the carrier is actually varied in accordance with the modulating signal. In other types of modulators the carrier and the modulating signal are simultaneously applied to a nonlinear element or circuit. The output of this non-linear element is a distorted wave containing many frequencies. …

Transfer Function Of The Modified Kramer System, David L. Hillhouse

Masters Theses

"The use of operational mathematics in the solution of engineering problems has grown tremendously in the last two decades, particularly during the last war. This has come about because of the facility with which problems which would be almost impossibly complicated or tedious to solve by classical methods can be solved using operational calculus.

The operational calculus, particularly the Laplace transform method, has become especially useful in the field of servomechanisms and controls. Here the constantly increasing complexity of systems used has resulted in very high order differential equations. The fact that the Laplace transform method makes it possible to …

Analysis Of Magnetic Amplifiers Based On Assumed Analytical Expressions Of B-H Characteristics, Wiley Talley Ruhl

Masters Theses

"In the past 10 years, magnetic amplifiers have received much attention in many different fields of engineering. Although the principles of this amplifier have been known since 1915, it has been forced into the background by the development of the vacuum tube amplifier, the need of better core material and better dry disk rectifiers.

The basic magnetic amplifier, or saturable reactor, is nothing more than an iron core reactance coil whose a-c impedance is controlled by a d-c premagnetization of the core. This d-c premagnetization may be obtained in a number of ways, the simplest of which is a separate …

An Experimental Study Of The Effect Upon The Current Distribution And Radiation Pattern Of Crossbars On Yagi Receiving Antennas, Gerald F. Sinnamon

Masters Theses

"The development and widespread use of radar systems in World War 11, and the post-war television boom, has brought about a large amount of investigation in antenna arrays. One of the types of antennas commonly used on radar systems during the early part of the war, and one which finds wide usage today as a television receiving antenna, is the well known Yagi antenna...

Since television antennas are usually mounted out of doors, the antenna must be made mechanically strong to prevent whipping or twisting due to wind, and to prevent sagging due to icing or to its own weight. …

Design Of A Galvanometer To Be Placed Within A Tubular Antenna For The Purpose Of Measuring Antenna Current Distribution, Ferdinand Henry Mullersman

Masters Theses

"The object of this paper is to design such a galvanometer for application to cylindrical UHF antennas and to discuss the procedure involving its use. The galvanometer will then be placed inside a completely isolated parasitic antenna and the distribution of current along the antenna will be measured"--Introduction, page 5.

The Design Of A Closed-Loop Voltage Regulator For A D-C Generator, Ernest P. Longerich

Masters Theses

"The methods of obtaining voltage regulation for a d-c generator are many, and they vary in complexity according to the requirements of the loads being supplied.

A need for zero voltage regulation is not uncommon in power supplies that are used in laboratory work. It is frequently not enough, however, to have a supply whose steady state regulation is zero; the need may also exist for fast transient response to changes in load.

In general, then, the criteria for excellent voltage-versus-load characteristics of a d-c power supply might be stated as follows:

1. It has zero steady state error.
2. It has …

An Experimental Investigation Of The Te01 Electromagnetic Fields In Ridge Waveguide, George A. Arnot Jr

Electrical and Computer Engineering ETDs

The aim of this thesis is to arrive at the field distribution of the ridge waveguide for the TE₀₁ mode, either mathematically or experimentally, the latter proving to be the case. Under the heading of Theoretical Considerations the difficulties involved in obtaining a mathematical solution to the problem are presented. The experimental results then follow and in the Conclusions a comparison is made of the results obtained by other writers and the author's data.

Analysis Of Conductor Vibration, Robert H. Nau

Electrical and Computer Engineering Faculty Research & Creative Works

Considerable attention has been given to conductor vibration of suspended transmission lines during the past 25 years. Even so, the engineers of the public utilities feel that they have only started to get a solution to the vibration problems. Extensive research programs are being conducted at the present time by manufacturers of conductor cable and ground wires and by numerous public utilities themselves.

Aeolian vibrations are the chief concern because they occur whenever a steady wind, of from one mile per hour to hurricane velocity, blows across the suspended line. Thus, millions of flexures, however small or large in amplitude, …

Investigation Of Vacuum Tubes As Four Terminal Networks, Vasil Uzunoglu

Masters Theses

"This thesis was undertaken with the aim of consolidating the most important work that has been done in the field of equivalent vacuum tube circuits which has been found to be highly disassociated.

The author of this thesis feels that this thesis is the most complete consolidation of information on equivalent vacuum tube circuits"--Introduction, page 3.

Series Capacitors, Emcet Bilgeer

Masters Theses

"Static capacitors as an element of transmission and distribution circuits first appeared in the form of shunt capacitors. These shunt capacitors were primarily used in power factor correction. They can be regarded as a load in the circuit which draws a loading current. This loading current fleeing through the reactive line produces a voltage rise, thus reducing the voltage drop between sending and receiving ends. This phenomenon helps the voltage control of the feeder as well as power factor correction. The disadvantage of the shunt capacitor is its inflexibility. The shunt capacitor is connected across the line; hence the voltage …

Economic Analysis Of Secondary Distribution Networks, Charles F. Cromer

Masters Theses

"In the early history of commercial electricity in heavy load density areas, the d.c. Edison Network was developed extensively. As far as reliability is concerned it is exceeded by no system. At the present time it has been developed to the extent of automatic and non-automatic converters, motor-generator sets, booster sets and storage battery reserve capacity.

This type of network is fed from several substations in the area at utilization voltage.

As load densities have increased, the large amounts of copper required, the cost of substation sites and large rotating conversion equipment have made the expansion of the d.c. Network …

An Experimental Investigation Of Multivibrators, Harry W. Gates

Electrical and Computer Engineering ETDs

The object of this study is two-fold. The first part of the investigation is concerned with substantiating experimentally the mathematical analysis for the conventional multi-vibrator and to derive similar expressions for the grid return multi-vibrator. The second purpose of this investigation is to delve into several possible ways of improving the linearity and thereby the frequency division usefulness of the multi-vibrator.

Calculations Of Maximum Sag Of A Transmission Line With An Ice Load On One Span, Rodney A. Schaefer

Masters Theses

"An important problem concerning electric power lines is the calculation of the maximum sag occurring when there is an ice load on only one span. The object of this thesis is to determine a practical method for calculating the maximum sag of a transmission line, suspended on suspension insulators, with the aforementioned loading conditions. This paper is limited to the case where the supports of the transmission line are at equal elevations and all span lengths are equal"--Introduction, page 1.

Analysis Of Cascade Of Four-Terminal Networks, Ernest Randolph Roehl

Masters Theses

"The object of this thesis is to find analytic expressions for the voltage and current variations along a structure composed of a cascade of identical dissymmetrical four-terminal networks driven harmonically at the sending end and working into an impedance at the receiving end and an impedance that can be placed at any of the junctions along the cascade. The method of analysis that is applied is analogous to that used in solving the long-line problem. A transmission system usually consists of the line or cable itself plus numerous other links whose purpose it is to correct defects in the line …

A Study Of Cathode Drift Compensation In D-C Amplifiers, Joseph W. Rittenhouse

Masters Theses

"The expression, cathode drift, has to do with the random variations in vacuum tube plate current which are attributable to similar variations in emission velocities of electrons leaving hot cathodes. The fact that these random current changes appear to result from spurious drifts in cathode potential, since all other electrode potentials are unrelated to them, give rise to the expression, cathode drift...The problem with which this paper is concerned is a study of some of the possibilities of compensating for cathode drift effects in a single amplifier stage. Specifically, this paper will: (A) present a detailed mathematical and graphical analysis …

Design Of A Radio Broadcasting Station, John William Hamman

Masters Theses

"In the design of any piece of equipment, before any work whatsoever is done, a reason for developing the object must be apparent to all concerned. Any expenditure of time, labor and money must be properly justified before action can be taken. In the case of this paper, then, the reason for designing a broadcast radio station for the Missouri School of Mines & Metallurgy at Rolla, Missouri is twofold: First, to provide an additional instrument whereby instruction may be given to students interested in the study of radio; second, to supply the residents of Rolla and vicinity with entertainment …

Analysis Of Simultaneous Faults By The Method Of Symmetrical Components, Robert Marshall Montgomery

Masters Theses

"The object of this thesis is to present a method for the analytic determination of fault currents and voltages of a symmetrical three-phase system that is subjected to three simultaneous faults. The fault analysis is to be effected by the method of symmetrical components...Though relatively infrequent, simultaneous faults are important because relay systems, operating satisfactorily for single faults, may fail to isolate simultaneous faults. Therefore, it seems worthwhile to have in convenient form a method for calculating short-circuit currents and voltages caused by faults occurring at the same time at three separate and distinct points of a system. It is …

Study Of The Method Of Geometric Mean Distances Used In Inductance Calculations, Harold Lockwood Seneff

Masters Theses

"The object of this thesis is to study the method of geometric mean distances as applied in the calculation of inductances of transmission line conductors and of multicircuit transmission lines. The thesis will consist of: (a) the derivation of some of the basic theorems and equations to be used, (b) the use of these theorems and equations in calculating the geometric mean distances of different transmission line conductors, and (c) practical application of geometric mean distances applied in the calculation of equivalent inductance of multicircuit transmission lines. The method of geometric mean distances as applied to individual conductors of single …

The Theory Of The Impulse Function For Oscillatory Mechanical And Electrical Systems, E. L. Hill

Journal of the Minnesota Academy of Science

No abstract provided.

Equations For The Ballistic Galvanometer, Robert H. O'Brien

Bachelors’ Theses

This thesis presents the development of the equations for the ballistic galvanometer. The subject was chosen because of its fascinating interest and because of the breadth of material included. The working out of the general equation required a comprehensive review of fundamentals in electricity and mechanics, swell as mathematics. The following features may be noted.

History Of The Thermionic Tube, Mary Liguoria Urbin

Bachelors’ Theses

My interest in the field of physics being that of electricity, I have been permitted to pursue this thesis in the field of thermionics.

The thermionic tube is one of vital importance not only in the field of radiotelegraphy and radiotelephony, but is of great value in the field of engineering and a vast asset in university and college laboratories. In fact, its advent has opened up a new era in many fields. H. J. Van Bijl terms is a "versatile talking bottle." In a paper of this nature only the important features can be stressed, and even here much …

A Study Of The Plating Prohibitive Properties Of Various Separators, Bruno J. Pozorski

Bachelors’ Theses

The problem of this thesis is to study the plating prohibitive properties of the various materials commonly used in the manufacturing of separators, and to indicate which material would be most serviceable and feasible in a separator. At one time positives and negatives were kept not more than 0.25 inches apart, with the idea of reducing the intervening layers of electrolyte, and, therefore, the internal resistance of the cell, as much as possible. It was, however, found that the output could actually be increased by putting the plates at greater distances, the fact being that the larger bulk of solution …

Design Of An Alternating Current Squirrel-Cage Induction Motor, Thomas Moffett Thompson

Bachelors Theses

"This thesis deals with the selection and specification of an induction motor"--leaf ii.

An Experimental Study Of The Cathode Fall In Helium And Argon With Wire Cathodes, L. G. Raub

University Studies (University of Nebraska) (1888–1984)

It was recognized rather early in the study of the phenomena of discharge of electricity through gases that the ordinary laws of conduction as found in solid and liquid conductors are not applicable to gases. It was shown by Zeleny and independently by Child that Ohm's law by no means represents the distribution of potential between electrodes in an ionized gas, but that the potential gradient is large in the vicinity of the electrodes, and not uniform throughout the space between them. When the pressure of the gas surrounding the electrodes is reduced to one or two millimeters and a …

Comparative Observations On The Evolution Of Gas From The Cathode In Helium And Argon, Clarence A. Skinner

University Studies (University of Nebraska) (1888–1984)

No abstract provided.