Digital Commons Network^™

Study Of Diagnosability Of Binary Address Decoders, Girishchandra Mahendrakumar Gandhi

Masters Theses

"This paper studies the diagnosability of various types of binary address decoders. An attempt is made to develop a theory of diagnosis for logical faults that might occur in these logic nets. The developed theory is used to analyze these logic nets for various input combinations. Finally, the derivation of optimum diagnostic test sequences is considered"--Abstract, Page i.

Basic Design Of Mosfet, Four-Phase, Digital Integrated Circuits, Earl Morris Worstell

Masters Theses

"MOSFET is defined as metal oxide semiconductor field-effect transistor. The integrated circuit design relates strictly to logic and switching circuits rather than linear circuits. The design of MOS circuits is primarily one of charge and discharge of stray capacitance through MOSFETS used as switches and active loads. To better take advantage of the possibilities of MOS technology, four-phase (4[phi]) circuitry is developed. It offers higher speeds and lower power while permitting higher circuit density than does static or two-phase (2[phi]) logic. Equations are developed that apply directly to the design of four-phase logic along with examples of circuitry that show …

State Assignments For Non-Normal Asynchronous Sequential Circuits, Gary Keith Maki

Masters Theses

"There is a lack of procedures that can be used to find good internal state assignments for asynchronous sequential circuits operating in the non-normal mode. Presented here, are two generalized state assignments, which are functions only of the number of rows in a flow table. The suggested bounds for the generalized state assignments are m + [log₂m] and m + [m/2] internal state variables for a 2^m-row flow table, where [ ] means "next lowest integer". Both generalized state assignments produce group (linear) codes. The algorithms for generating these internal state assignments are easy and straight-forward to implement. …

The Mechanism Of Second Breakdown In Transistors, Eugene David Fabricius

Dissertations

The purpose of this dissertation is to examine the behavior of electrons and holes in a semiconductor or diode under conditions of high current density as a function of temperature, and to relate this behavior to the phenomenon of Second Breakdown. The approach used is that of magnetohydrodynamics, the electrons and holes being treated as a plasma "gas" embedded in the dielectric of the semiconductor.

This approach is unique in the following respects:

1. This is the first attempt to explain second breakdown in terms of magnetohydrodynamics.
2. This is the first time an explanation of pinching in a solid at room …

Realization Of Transfer Impedances Using Distributed Rc Elements In A Common Ground Linvill Configuration, Walter Woronka

Theses

One of several synthesis procedures available for the realization of a transfer admittance is that of Linvill. This synthesis procedure employs an active element, a negative impedance converter (NIC), to shift the poles of passive immittance functions from the negative real axis into the complex plane to realize the desired transfer immittance function.

The Linvill synthesis procedure is extended to networks containing cascaded distributed RC elements and the conditions which must be satisfied to realize a transfer impedance using these distributed elements are defined.

The Development Of An Instrument For Three Dimensional Analysis Of Micron Quantities Of Tooth Movement, M. Clark Lamberton

Loma Linda University Electronic Theses, Dissertations & Projects

In order to quantitate initial tooth movement in response to forces applied to the tooth crown, an instrument for intraoral use has been developed. The photomicrometer consists of nine photosensitive cells mounted in an assembly of two layers. Eight of the cells were mounted to form X and Y axes, top layer and bottom layer, to measure horizontal movements. The ninth cell was mounted in the center of the bottom layer and was used for alignment and for measurements in the Z or vertical axis. The photocell assembly was approximately 10 mm diameter and 6 mm high. This assembly when …

Noise Spectral Density As A Diagnostic Tool For Reliability Of P-N Junctions, Young Duck Kim

Dissertations

The feasibility of choosing noise-voltage spectral density as a prediction parameter for the degradation of p-n junctions has been examined both theoretically and through a series of life-tests.

Experimental facts show that the noise-voltage spectral density, S_v(w), observed in a p-n junction under the breakdown condition tends to be "white" (which contradicts the 1/f-noise theory), and S_v(w) is inversely proportional to the breakdown current (which contradicts the shot-noise theory). Furthermore, some p-n junctions display one or more multiple peaks of S_v(w) at different current levels which can not be explained by any of the …

A Study Of The Properties Of The Biconical Antenna, Kurt Frank Hafner Jr.

Theses

Expressions are found for the fields produced by TM and TEM modes along a finitely conducting biconical antenna. Expressions are also found for the TM and TEM fileds along a biconical antenna having a lossy dielectric coating. It is shown that the antenna losses produce an anntenuation of the the fields along the antenna. It is found that because there is a dispersion of the fields along the biconical antenna, the attenuation produced by the losses is, in genaral, not characterized by simple exponential.

A solution is obtained for the fields of the TEM wave along a biconical antenna coated …

A Simulation Of The Transistor By Computer Using The Linvill Diffusion Model, Clifford D. Skouby

Masters Theses

"This investigation involves the construction of an analog computer model of the transistor. The computer model is based upon the Linvill diffusion model. The equations for the Linvill diffusion model were programmed on the computer by making certain approximations. Different models, using different approximations, were used for the different regions of operation of the transistor. A composite analog model was constructed by combining the models for the restricted regions, giving a general model good for all regions of transistor operation. This analog diffusion model was modified to account for the effects of junction capacitance and base resistance. The modified analog …

The Modeling, Fabrication, And Testing Of An Instantaneous Torque Measuring System, Thomas Phillip Hertel

Masters Theses

"The purpose of this work was to obtain a measuring system to experimentally determine the instantaneous magnitude and frequency of the torques from zero to 2400 Hertz produced by a single phase motor. This paper explains the methods employed in designing and fabricating a measuring system and shows the results from tests using this equipment. It was found that a measuring system based on the determination of the instantaneous value of the stator's reaction torques could be realized. Also, it was found that some simple methods of computation could be used to find the magnitudes of the frequency components comprising …

Impulse Response Of Rc Exponential Lines, Oscar Gojon

Masters Theses

"This thesis presents an application of the analysis of the n-wire exponential line to the case of the 3-wire RC exponential line terminated in its characteristic impedance, and to the 2-wire exponential line with open and short circuit terminations. These lines are excited with Δ-function voltage generators, and the corresponding impulse responses are obtained"--Abstract, Page ii.

Synchronization Of Pulse Code Modulation Telemetry, Lawrence J. Mueller

Masters Theses

"Pulse Code Modulation (PCM) is one of the most widely utilized radio telemetry techniques for the recovery of test data from aerospace vehicles. Synchronization of the receiver with the transmitted data is perhaps the prime requisite of a PCM telemetry system. In this paper the frame synchronization process is analyzed by developing equations which define the three modes of synchronizer operation (SEARCH, VERIFY, and LOCK) in terms of the relative probabilities of operation. The criteria employed to optimize the synchronization process are the mean time to acquire true synchronization, the probability of true synchronization after verification of the synchronization decision, …

Measurement Of Demagnetizing Factor Of Ring-Core, Subhashchandra Chimanlal Patel

Masters Theses

"A method has been presented to measure the demagnetizing factor of ring-cores. First the incremental apparent permeability and the incremental true permeability were measured at different degrees of saturation and then the demagnetizing factor was determined from those results. The cores used were tape would ring-cores of mean length of 8.0 cm. The method was found suitable for cores with 1/4 mil or thicker tape, but was in question for the 1/8 mil tape core tested"--Abstract, page ii.

A Simple Design Algorithm For Synthesis Of Multilevel Combinational Networks, James H. Tracey

Electrical and Computer Engineering Faculty Research & Creative Works

An algorithm is presented for the synthesis of combinational networks with a constrained arrangement of ANDS, ORS, NANDS, NORS, and inverters. The algorithm is easily presented to students in an introductory logic design course and has considerable application in modern practical logic design. Many texts available for a first course in logic design give very limited practical guidance for synthesis of networks under constraints outlined here. It is suggested that the algorithm presented here be furnished as supplementary material in the introductory course. Copyright © 1968 by The Institute of Electrical and Electronics Engineers, Inc.

Recombination Statistics For Neutron Bombarded Silicon Transistors, M. C. Chow, J. L. Azarewiczt, C. A. Goben

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a recombination statistical model for the neutron-induced base current component reported previously. The derivation was based on the following: 1) the current equation for the induced current component developed previously; 2) the Shockley-Read-Hall statistics for holes and electrons; and 3) the recombination statistics derived by Sah, Noyce and Shockley for sites in the bulk space-charge region. The recombination statistics model depends on the diffusion potential, the junction voltage, the activation energy, temperature, and the ratio of capture cross-sections for holes and electrons. The utility of such a recombination statistical model is illustrated by using measured parameters to …

Design Of Truncated Sequential Tests For Rapidly Fading Radar Targets, Norval D. Wallace

Electrical and Computer Engineering Faculty Research & Creative Works

Curves and equations are presented from which the exact performance of truncated sequential tests can be determined for one important case: the biased square-law detector for the detection of rapidly fading targets. The method of generating functions is used to derive probability distributions for sample size. It is shown how these probability distributions can be used to determine truncation errors and the effects of multiple-resolution elements. Sample calculations are performed to determine the effects of a particular truncation procedure. Copyright © 1968 by The Institute of Electrical and Electronics Engineers, Inc.

A Study Of A Model-Referenced Adaptive Control System, James William Graham

Masters Theses

"A model-referenced adaptive controller for a first-order plant with time-varying parameters is developed using Lyapunov's second method. The system is studied with the aid of analogue computer simulation and an oscillatory mode is encountered. A method of reducing the oscillations by addition of a compensating network is proposed. The compensation is obtained through the use of linearization and root locus techniques. The compensated system shows a much improved error response over the original system"--Abstract, page ii.

Electric Field Investigations And A Model Of Electrical Spraying Of Liquids, Wallace Deshon

Masters Theses

"The equation E = [2 V] [over] [N 1n(4d/N] has been used for determining the electric field at the liquid tip in electrical spraying of liquids. Data were taken at the instant of spraying in an attempt to experimentally verify this equation. The results indicate that the value given by the equation needs to be increased by about 20% in the normal range of operation. A model for the spraying mechanism of the liquid is also proposed"--Abstract, page ii.

Recombination Statistics For The Neutron-Induced Base Current Component, Ming-Chwan Chow

Doctoral Dissertations

"This paper presents a derivation of the recombination statistical model for the neutron-induced base current component. The derivation was based on the assumptions: 1) the current equation for the induced current component developed by Goben is valid; 2) the Shockley-Read-Hall statistics for holes and electrons are applicable; and 3) the recombination statistics derived by Sah, Noyce and Shockley, for sites in the bulk space-charge region are valid. Several examples were presented to emphasize accuracy of this derived model for predictions. This paper shows that the recombination process may be described by a mathematical model, recombination statistics which depend on the …

Signal Theoretic Characterization Of A Function Using Positive Exponential Basis Functions, James Julius Baremore

Doctoral Dissertations

"A signal theory characterization of a time function or signal is a representation of the function throughout a sample interval by an orthogonal basis function expansion. The characterization described here obtains the coefficients in the expansion by processing the input waveform, in real time, through a system of three terminal passive RC filters. The outputs of the filters are sampled periodically and the coefficients of the basis function expansion in that interval are related to these values. The basis functions result from an exponential transformation applied to the Legendre polynomials and are orthogonal in time over the sample interval. The …

Thermal Runaway In Power Transistors, Jerry H. Lee

Masters Theses

"Considerable work has been done on the theory of thermal runaway and the relationship between transistor junction temperature and collector power dissipation. The first part of this thesis is a review of literature. An equation for the normalized junction temperature and its peak value is developed. From this equation, the junction temperature at the thermal runaway point for a given maximum power dissipation could be determined. The second part of this thesis is experimental. The author examined the thermal runaway points for eight different transistors in the basic common emitter class A circuit which operated under no signal DC conditions"--Abstract, …

An Ultrasonic Pulse Generator Using The Transducer As A Frequency Determining Element, Donald E. Watke

Masters Theses

"This paper describes the development of a method of ultrasonic pulse generation in which the transducer determines the frequency of oscillation. A definite advantage of this method is the ability of the frequency of oscillation to change with changes in the transducer mechanical resonant frequency. This maintains peak efficiency at all times. The method is demonstrated in a small sonar transmitter but could be applied to any area involving driven ultrasonic transducers"--Abstract, page ii.

Transient Response Of A Class Of Distributed Systems, Jaw-Shyong Tzeng

Masters Theses

"The transient response of uniform distributed systems with any transfer function that is rational in w=e[square root of Ts] can be analyzed with the basic form of the transfer function [1 over (w-a)] after partial fraction expansion, where the pole a can be real or complex in the w plane. with the complex pole within the stable region in the w plane, there are only two possible combinations of the basic transfer function [1 over (w-a)], i.e. [1 over (w-a)] ł [1 over (w-a*)], for physical realizability. The imaginary part of the transient response of the basic transfer function [1 …

Neutron Radiation Damage In Silicon Transistors, C. A. Goben, F. M. Smits, J. L. Wirth

Electrical and Computer Engineering Faculty Research & Creative Works

In the investigation of base and collector current as a function of the emitter-to-base voltage, previous studies have shown that neutron-induced base current has components originating in the emitter space charge region as well as the neutral base region. This study shows that while the low injection level neutron-induced base current is dominated by the space charge component, the high injection behavior appears to be controlled by recombination in the neutral base region. Additional experiments performed in special tetrode transistors and van der Pauw-type samples indicate that changes in collector current are dominated by recombination in the neutral base, while …

Water Resources Of Tacoma, Washington, Richard Martin Glaser

Graduate Student Research Papers

This study explores the fresh water and hydroelectricity resources of the City of Tacoma, Washington. The history and development of the water supply and hydroelectric facilities is examined. One can see that the development of the water resources has been directly affected by the growth in population and industry and that the nearness to the city of development sites has been an aid in this development. With the amount of water available at present and the increase in hydro-electric facilities during this decade, the future outlook for Tacoma in the field of water resources seems bright.

Small-Signal Impedance Of A Junction Diode At High Injection Levels, John E. Lundy

Masters Theses

"A mathematical expression for the driving point impedance of a junction diode at high injection levels is developed. To evaluate the impedance versus frequency characteristic of a diode, it is necessary to know the minority carrier lifetime as a function of injection level and doping density in the base (lightly doped) region, the junction area, and the base width. The interesting characteristic of the diode impedance at high injection levels is the inductive reactance displayed by the diode.

The expression is developed by solving the differential equation for charge flow in the base region of a diode assuming space-charge neutrality …

A Multiple-Input Chemical 'Memistor' For Adaptive Circuits, Richard Franklin Crall

Masters Theses

"A modification of Widrow’s "memistor" is made in a form suitable for extension to multiple-input devices. This modified form is extensively investigated using analog field maps, and through experimental testing. The multiple-input device presented exhibits good adaptive characteristics and reduces the number of interconnections required in the external circuitry"--Abstract, page ii.

Determining The Transfer Matrices Of Tapered Multiwire Transmission Lines, Clyde A. Vandivort

Masters Theses

"The advent of monolithic and integrated microelectronic circuits has aroused interest in passive multilayered thin film networks. The basic thin film network is shown in Figure 1. This structure consists of alternate resistive and dielectric layers sandwiched together. Such devices are referred to as distributed parameter RC networks. The reduction of volume and increased reliability offered by thin film devices has caused considerable effort to be extended in the analysis of their characteristics....

The incremental equivalent circuit given in Figure 2 stems directly from the above physical parameters and is the circuit used as a basis for the analysis that …

A Class Of Pattern Recognition Machines, Shaw Yih Chung

Masters Theses

"The classification of signals through the use of pattern recognition techniques may be viewed as a statistical classification problem since at least some pattern classes are analog signals which have been contaminated by additive noise. In order to represent these signals at the input of a pattern classifier they are sampled and a vector and an m-dimensional vector space used to describe the pattern. Consequently, these pattern samples are processed to determine the parameters of the statistics. In this study the additive noise was assumed to be Gaussian in nature. This study was based on a priori knowledge of the …

Synthesis Of Filters Using Distributed Rc Networks, Mario Nader Nader

Masters Theses

"This paper deals with the problem of realizing filter and delay functions by means of distributed RC devices. The method is made possible through the use of a distributed RC network which possesses rational admittance parameters. The technique of approximating transfer functions using polynomial factors that are ration in e[superscript (a square root of s] is explained. These factors are used to approximate the magnitude and phase characteristics for a low-pass filter. This filter is then realized using the admittance functions studied by Wyndrum, the "s->W" transformation, and Richard's theorem. Those factors are then used to approximate high-pass and …