Digital Commons Network^™

Ibm/Xt-Based Automatic Monitoring Instrumentation System For Eating Behavior Studies In Rats, Binghong Gui

Theses

An auto-feeding system based on the IBM-XT microcomputer has been designed for use in the anti-obesity research program in the Pharmacology Department at Hoffmann-La Roche Inc. By using this system, experimental rats can be automatically fed, some which have been given anti-obesity drugs and some which have not. The system can also collect data, such as eating times and food intake, which are used for studying the rat's eating behavior.

The system is designed to control thirty six cages with one experimental rat in each cage and it performs three functions:

1 ) To automatically dispense a preset quantity of …

The Application Of Zero-Sum Games To Low Sensitivity Optimal Control, Jun Huang

Theses

This thesis deals with the synthesis of low sensitivity optimal control systems. Zero-Sum games are applied to the first order linear differential equation system. The goal is to obtain an optimal control of the system performance, and at the same time, reduce the sensitivity of the performance index and sensitivity trajectory.

In this thesis, the quadratic index of performance is selected in the argumented system which is combined/ the system equation with the sensitivity equation. Two control variables U & V are selected to maximize and minimize the system, in order to obtain the optimal value of the system.

Two …

Analysis Of Spread Spectrum System Using Direct Sequence Technique In Jamming Environment, Kandarp A. Vyas

Theses

A spread spectrum system is a means of transmitting data over a channel In addition it offers a wide variety of features like data security and signal hiding This work studies in detail a spread spectrum system using direct sequence binary phase shift keying. The Sliding Correlator and Sequential Detector techniques have been used to achieve synchronization. A brief study of pseudorandom noise has been presented. System was simulated on UNIX using 'c'. A modified version, suitable for software implementation, of Sliding Correlator and Sequential Detector was, used. Results generated using tins model are presented here.

Temperature Dependent Reliability Of Plastic Packaged Microcircuits, Wasim Ahmed

Theses

Increasing power and power densities in new high complexity semiconductor devices are creating heat removal problems. Increased powers produce higher junction temperature which lead to potentially faster degradation of device reliability. Thermal management at device level packaging involves efficient and cost-effective removal of dissipated thermal energy from the device to assure its reliable performance over the long term. In the context of very high levels of integeration of future ICs, thermal management will mean making such devices possible close to the limits of acceptable high temperature.

The major factors affecting heat flow in a plastic Dual-in-line-packages (DIP'S) are investigated using …

An Investigation Of Interrupt Handling Schemes In Pipeline Processors, Shailesh Ratilal Gami

Theses

In order to acheive higher performance in a pipeline processor, proper interrupt handling is essential. In a pipeline processor, interrupt handling is difficult because many instructions are in the processor at the same time. This study describes and evaluates the different solutions to interrupt handling. Several pipelined 32-bit microprocessors have also been studied and their architectural and programming features are compared.

Implementing Ray Tracing Algorithm In Parallel Environment, Tjah Jadi

Dissertations and Theses

Ray tracing is a very popular rendering algorithm in the field of computer graphics because it can generate highly-realistic images from three-dimensional models. Unfortunately, the computational cost is very expensive. To speed up the rendering process we present both static and dynamic scheduling (balancing) strategies for a multiprocessor system. Hence, the load balancing among the processors is the most important problem in parallel processing. The implementation of the algorithm is based on a modified octree structure.

General Analysis And Optimization Of The Four-Detector Photopolarimeter, R. M.A. Azzam, I. M. Elminyawi, A. M. El-Saba

Electrical Engineering Faculty Publications

The four-detector photopolarimeter (FDP) is analyzed for an arbitrary spatial configuration and any reflection characteristics (r_i, ψ_i, Δ_i) of the first three detectors. The instrument matrix A, which relates the output signal vector I to the input Stokes vector S by I = AS, and its determinant are derived explicitly. The essential condition that A be nonsingular (det A ≠ 0) is satisfied in general with uncoated absorbing detector surfaces, assuming that the plane of incidence (POI) is rotated between successive reflections by other than 90°. Therefore no special coatings on …

Spontaneous Coherent Pulsations In Standing-Wave Laser Oscillators, Lee W. Casperson

Electrical and Computer Engineering Faculty Publications and Presentations

Spontaneous pulsation phenomena in xenon lasers are now well known, and related effects have been observed with other laser types. Most theoretical analyses of such pulsations are formulated for unidirectional ring lasers, whereas most experiments involve standing-wave resonator geometries. Described here are rigorous semiclassical models governing the spontaneous pulsation instability in standing-wave laser oscillators. The standing-wave results are more complex and closer to experimental observations than the ring results for operation in the Lambdip region near line center.

Spectral Behavior And Pulse Train Instabilities Of A Synchronously Pumped Mode-Locked Dye Laser, Duncan Leo Macfarlane, Lee W. Casperson, Anthony A. Tovar

Electrical and Computer Engineering Faculty Publications and Presentations

The pulse-train envelope of a synchronously pumped mode-locked dye laser has been experimentally studied as a function of cavity length detuning. When a bandwidth-limiting birefringent tuning filter is included and the cavity is adjusted to the length that yields optimally short (˜2-psec) pulse, there is a slow (≤800 kHz), erratic amplitude modulation that provides a 20% variation in pulse energies. As the cavity length is detuned on the order of one part in 10⁴, the modulation vanishes, but the individual pulse lengths increade dramtically. Further detuning results in a clean periodic envelope with a 20% modulation depth and a˜5-μsec period. …

Modal Interference Techniques For Strain Detection In Few-Mode Optical Fibers, Bradley D. Duncan

Electro-Optics and Photonics Faculty Publications

Interference between the modes of an optical fiber results in specific intensity patterns which can be modulated as a function of disturbances in the optical fiber system. These modulation effects are a direct result of the difference in propagation constants of the constituent modes. In this presentation it is shown how the modulated intensity patterns created by the interference of specific mode groups in few-mode optical fibers (V < 5.0) can be used to detect strain. A detailed discussion of the modal phenomena responsible for the observed strain induced pattern modulation is given and it is shown that strain detection sensitivities on the order of 10-9 can be expected. Data taken during the evaluation of an actual experimental strain detection system based on the developed theory is also presented.

Self Consistent Model Of The Glow Discharge, Hao Chen

Electrical & Computer Engineering Theses & Dissertations

The strong spatial variation of the electric field intensity in the vicinity of the cathode of a gas discharge requires the use of microscopic methods to describe the nonequilibrium behavior of the electron dynamics in this region. A one-dimensional Monte Carlo code was developed. It allows one to obtain the distribution of the electron drift velocity and rate coefficients for a given electric field intensity in the cathode fall. The results of this calculation are used to find the density distribution of charged particles in this region and consequently, by means of Poisson's equation, a corrected electric field intensity. In …

Multaid, A Consultant For Multi-Microprocessor Network Selection, Bernabe Javier Arruza

Theses

A knowledge based system has been developed to enable an architectural designer to select an adequate interconnection network to be utilized in a parallel or distributed processing system. It is implemented using the Knowledge Engineering Environment, K.E.E., package from IntelliCorp.

The user will interact with the system through symbolic representation. From the selected symbols, the knowledge base system will identify the most appropiate network for the given application. The system will display the network topology along with all the information and results of all pertinent calculations corresponding to the given network. The program will also display the rule driven search …

Fault Location And Control Optimization Planner (Expert System Approach), Fenil Shah

Theses

FALCON is a rule based expert system designed to control a process being regulated by "intelligent" controllers which would at each time and stage execute a series of diagnostic or decision tests and only then initiate a control action identified by the process engineer. The current implementation includes fault identification, diagnostic and process settings in case of low efficiency and poor quality in the product. This research is a part of large research project in flexible manufacturing.

The system is intended to grow into a complete diagnostic master and take corrective actions with the help of the operational personnel.

FALCON …

The Fast Fourier Transform In Assembly Languages Of Microprocessor 68000 And Microcontroller 8052, Hari Kumar Baldawa

Theses

In this report, the 256 point radix-2 FFT algorithm is written in assembly languages of microprocessor 68000( or 68008) and microcontroller 8052( or 8051). The data used can be upto 30 bits, of which the least significant 12 bits are assigned for fractional part.

The FFT code in assembly of 68000 is written for Sinclair's QL-100 personal computer with 68008 CPU. The SuperBASIC programs are used to access and test the performance of FFT code. The average time of execution falls between 0.3 to 0.4 seconds for 256 discrete points.

Again, same FFT algorithm is written in assembly language of …

The Evaluation Of The Ti-Speech System On Pc Computer, Ying Wu

Theses

A PC-TI-SPEECH system has been set up by the author of this thesis on the IBM PC/AT compatible computer. The basic functions of the system are as follows: data acquisition, internal signal synthesization, signal processing and speech recognition. The system is built up by a PC, TI-Speech Hardware kit, MADCAP software package,TI-Speech Tool kit. This thesis covers the setup, evaluation and operations of the complete PC-TI-SPEECH system, development of the system for further applications, and operations of running some evaluation programs generated by doing this thesis.

Maine Woodburning Guide, Office Of Energy Resources

Maine Collection

Maine Woodburning Guide

State of Maine, Office of Energy Resources,

Augusta, Maine, 1988.

Contents: 1 Safe Installation / 2 Buying Firewood / 3 Efficient Woodburning / 4 New Equipment Developments / 5 Chimney and Stovepipe Cleaning

Finite Impulse Response Filter Design Using Cosine Series Functions, Carlton Delos Bishop

Retrospective Theses and Dissertations

Window functions have been extensively used for the design of SAW filters. The classical truncated cosine series functions, such as the Hamming and Blackmann functions, are only a few of an infinite set of such functions. The derivation of this set of functions from orthonormal basis sets and the criteria for obtaining the constant coefficients of the functions are presented. These functions are very useful because of the closed-form expressions and their easily recognizable Fourier transform. Another approach to the design of Gaussian shaped filters having a desired sidelobe level using a 40 term cosine series will be presented as …

Phase Noise Analysis And Basic Measuring Techniques, James A. Ferrell

Retrospective Theses and Dissertations

Oscillators are important elements of RF and microwave communications systems. The increased use of the electromagnetic spectrum requires the use of better and cleaner oscillators. Local oscillators in RF to IF converters play a big role in the overall performance of the receiver systems because phase noise in the local oscillator can drastically reduce the signal to noise ratio at the output of the receiver, especially if the converter is at the front end. Phase noise is the parameter used to describe oscillator stability. The analysis and basic measurement techniques of phase noise are performed in this report.

This research …

Uniformity Correction For A Scanned Long Wavelength Infrared Focal Plane Array, George C. Heinold

Retrospective Theses and Dissertations

This paper presents an alternative approach in providing uniformity correction for an infrared focal plane array by utilizing analog MOSFET circuitry. This technology is compatible with modern VLSI production and is capable of enhanced operation at cryogenic temperatures. The method presented here is a potential contribution to the growing list of special analog circuit configurations which may be incorporated for on-chip signal processing, inside the cryogenic dewar assembly. Electronic packaging of current thermal systems could be significantly reduced in size and weight by trading some of the cumbersome digital algorithms and complex post-processing circuitry for implementation in VLSI form.

The …

Uniform Energy Discharge For Pulsed Lasers, Eric Calvin Koschmann

Retrospective Theses and Dissertations

The art of achieving a large energy discharge in a controlled manner with relative ease is to use a pulse forming network. Historically the design of such networks generally used a single inductor and capacitor. Although easy to design and implement, this practice does not provide optimum performance in all cases. In particular, most laser welding requires a uniform energy discharge in a pulse to produce a high quality weld. Analysis has shown that when the pulse forming network approximates a lumped constant transmission line a maximum flat pulse is produced with minimal degradation of the pulse rise time. This …

Three-Level Block Truncation Coding, Deborah Ann Lee

Retrospective Theses and Dissertations

Block Truncation Coding (BTC) techniques, to date, utilize a two-level image block code. This thesis presents and studies a new BTC method employing a three-level image coding technique. This new method is applied to actual image frames and compared with other well-known block truncation coding techniques.

The method separates an image into disjoint, rectangular regions of fixed size and finds the highest and lowest pixel values of each. Using these values, the image block pixel value range is calculated and divided into three equal sections. The individual image block pixels are then quantized according to the region into which their …

Computer Aided Design Of Linear Phase Finite Impulse Response Digital Filters, Wentao Lyou

Retrospective Theses and Dissertations

This research report is an investigation of techniques for designing linear phase finite-duration impulse response (FIR) filters. The software package, CADFIR, developed for this project can be used to design linear phase FIR digital filters via three well-known design techniques: the window method, the frequency sampling method, and the optimal filter design method. CADFIR has options for designing such standard filters as lowpass, highpass, bandpass, and bandstop filters as well as multipassband-stopband filters. The fundamental properties of FIR filters are discussed and design algorithms associated with the three FIR filter design techniques are developed. Design examples are included and the …

Numerical Analysis Of The Resonant States Of Quantum Wells And Superlattice Devices, Alan Gilbert Whittaker

Retrospective Theses and Dissertations

This thesis is concerned with the development of a numerical model to describe the resonant states associated with quantum well and superlattice devices. A numerical method is described where the time-independent Schrodinger equation is represented as a series of simultaneous algebraic equations using the finite-element method. The eigenvalues for these equations are then found using a Sturm sequence, and the eigenfunctions subsequently calculated using a reverse iteration method containing orthogonality constraints. Simulations of specific devices are presented and compared with experimental results and good correlation is observed.

Analysis Of Phase Noise In Phase Lock Loop, Diane Marie Pavik

Retrospective Theses and Dissertations

This research report presents an introduction into phase lock loops (PLL) with a major emphasis on calculating phase noise in frequency synthesizers. A PLL model that incorporates the major sources of noise is presented for the purpose of design analysis. The model can be used to analyze second and fifth order PLLs which allows the accurate calculation of phase noise as a function of independent variable design parameters. The stability of PLLs is also analyzed to show the effects of a marginally stable system on the resultant phase noise. Developing an accurate PLL model which accounts for the major sources …

Applications Of Lattice Filters To Quadrature Mirror Filter Banks, Gregory R. Jaspers

Retrospective Theses and Dissertations

Presented is a method for designing and implementing lattice filters to be used in Quadrature Mirror Filter (QMF) Banks. Quadrature Mirror Filter Banks find use in applications where a signal must be spilt into subbands operated on then reconstructed in the output. Because of their structure, lattice filters do this very well and allow perfect reconstruction, even when the lattice coefficients must be quantized. In this paper QMF's and Lattice Filters are derived and analyzed. Application of the lattice filter is presented along with a design program and example of its use to implement a QMF. The computer aided design …

Laser Induced Darkening Semiconductor Dope Glasses, Jayant Malhotra

Retrospective Theses and Dissertations

No abstract provided.

Simulation Of Communication Systems Using Personal Computers, William H. Tranter, Carl R. Ryan

Electrical and Computer Engineering Faculty Research & Creative Works

Microcomputer simulation provides a powerful tool for computer-aided design and analysis of communication systems and requires a minimum of investment. Two different simulation examples are presented: a fixed topology simulation program for digital data links written in Pascal; and a simulation of an analog link using Fortran. These examples are followed by a consideration of the new 32-bit single-board computers and their potential impact on microcomputer simulation. © 1988 IEEE

A New Method For Broadband Surface Acoustic Wave Diffraction Analysis, Jacqueline Hanvey Hines

Retrospective Theses and Dissertations

This thesis describes an innovative technique for determining the impulse response of a SAW device including the effects of diffraction on both isotropic and anisotropic substrates. The approach presented is unique in that it determines the point-to-point impulse response for the isotropic case using the two-dimensional wave equation, and utilizes a double integral reduction technique to determine the tap-to-tap response, thereby significantly reducing the complexity of the calculations involved. An extension is then made to describe the impulse response of two cascaded transducers of arbitrary geometry, along with some simplifying cases. Previous attempts to model diffraction effects generally utilized either …

Optical Interferometric Formation Of Phased Array Antenna Footprint/, John E. Sherwood

Retrospective Theses and Dissertations

A 40 dB gain RF Low Noise Amplifier (LNA) matched to a photodiode input is designed using TOUCHSTONE (S-parameter based CAD software), built, and tested. The RF LNA formed the detector of a Mach-Zehnder interferometer constructed with single mode fiber, coupler, Gradient Index Rod Acousto-optic modulator (ADM) . (GRINROD) lenses, and an The ADM is used to frequency shift the optical frequency by 125 MHz, and the motion of a GRINROD lens is used to produce an optical phase shift that is recovered at the detector as an electrical phase shift by using heterodyne detection . Finite Hankel transforms are …

A System For Measuring The Phase Difference Between Two Points Of A Propagating Laser Beam, Jefferson E. Odhner

Retrospective Theses and Dissertations

An optical system has been designed, analyzed, implemented, and calibrated which measures the phase difference between two points of a propagating laser beam. The system is a quadrature interferometer whose detector outputs are processed by a computer. This quadrature interferometer measures both the phase and amplitude variations between two points of a laser beam after the beam passes through turbulence . These measurements are in turn processed by a computer to isolate the phase variations from the amplitude variations. Further statistical analysis which can be performed on these phase variations should provide an understanding of the phase fluctuations of propagating …