Digital Commons Network^™

Conditional Artificial Dielectric : Optically Controlled Microwave Modulator, J. Manuel Jimenez

Theses

A conditional artificial dielectric with embeddings of either CdS, GaAs or Si in PMMA form the dielectric material of a microstrip in a homodyne microwave detection system. The system consists of a Michelson or Mach-Zehnder interferometers with the microstrip placed in one arm. The index of refraction of the microstrip substrate is modulated by chopped incident light causing amplitude and phase variations in the incoming RF signal. Those variations are detected by mixing the light modulated microwave carrier(information channel) with the unmodulated carrier (reference channel) in the interferometer. The output is sensed by the square law detector and a lock-in …

Translation Of 'Kamalakanta: A Collection Of Satirical Essays And Reflections', Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

This venture was born initially out of the desire to make those works of Bengali literature which have moved me profoundly, and which I consider first-rate by any yardstick, available to friends and fellow enthusiasts who cannot read the original. In attempting to channel literary and philosophical masterpieces into a different medium, I Have experienced firsthand the formidable challenge that a translator must face because not only of the barrier imposed by the languages involved, but perhaps more so because .of his or her own severely inadequate faculty being called upon to match both the genius and the inspiration of …

Electromagnetic Focusing Properties Of Chirped Metallic Gratings, Jeffrey C. Schmidt

Retrospective Theses and Dissertations

The focusing properties of chirped diffraction gratings have long been studied and often used in applications at optical frequencies. Chirped metallic gratings of this type have also been studied theoretically at microwave frequencies, but no attempt has been made to experimentally examine or utilize the focusing properties of these structures at microwave frequencies. This thesis presents an experimental analysis of the focusing properties of chirped metallic gratings. These gratings are designed to focus electromagnetic energy at a predetermined position by varying strip width and spacing as a function of position. The diffraction gratings are characterized, and experimentally measured results are …

Principal Linear Polarization States Of An Optical System, R. M.A. Azzam

Electrical Engineering Faculty Publications

The constraint on the Jones matrix of an optical system such that there exist two linear polarization states at its input that are mapped onto two corresponding linear states at its output is derived. These principal linear polarization (PLP) states, which characterize a broad range of systems, are also found in terms of the Jones matrix elements. Special cases when the PLP states are orthogonal, collapse onto one state, or become infinite in number are indicated. For a deterministic or nondeterministic optical system described by a Mueller matrix, the existence of two PLP states places a constraint on only 3 …

Effect Of Fluctuations On Lower Hybrid Power Deposition And Hard X-Ray Detection, George Vahala, Linda L. Vahala, Paul T. Bonoli

Electrical & Computer Engineering Faculty Publications

The hard X-ray intensity radial profiles from lower hybrid current drive experiments are interpreted as being correlated with fluctuations in the bulk plasma. This view seems to be dictated by comparing the hard X-ray data for various n_║ with the Monte Carlo solutions of the lower hybrid wave energy deposition on plasma electrons. Information on internal magnetic fluctuations may, under certain conditions, be unfolded from a n_║ scan of the hard X-ray profiles.

Characterizations Of Antimony Tri‐Sulfide Chemically Deposited With Silicotungstic Acid, O. Savadogo, K. C. Mandal

Faculty Publications

No abstract provided.

Optimizing The Integration Of Photovoltaic Systems With Electric Utilities, Badrul H. Chowdhury

Electrical and Computer Engineering Faculty Research & Creative Works

The author introduces a comprehensive simulation package whereby the optimal size, operation, performance and economics of a photovoltaic (PV) system can be determined in the utility-integrated mode. The central issue is to present a single definitive optimization model. A stepwise analytical methodology starting at the solar resource and culminating in the value of the PV system in terms of avoided costs is provided. The methodology includes processing of the solar irradiance; identification of the PV system''s configuration and operational features; identification of real-time system controls in the presence of PV generation; security assessment in the presence of PV and production …

Topics In Nonlinear Stochastic Control, Estimation, And Decision, Using A Measure Transformation Approach, Charalambos Demetriou Charalambous

Electrical & Computer Engineering Theses & Dissertations

We discuss topics in the theory of nonlinear stochastic control, estimation, and decision via a probabilistic approach using measure transformations and martingale theory. First, we investigate the problem of estimating a diffusion process using coordinate transformations and measure transformations, both locally and globally; this is the analog of nonlinear coordinate and state feedback transformations used to obtain exact linearization in nonlinear deterministic control problems. Our results are new in that we use a probabilistic approach rather than a purely geometric one, and also in that we derive representations when the processes are defined locally rather than just globally. A gauge …

Spontaneous Coherent Pulsations In Standing-Wave Laser Oscillators : Stability Criteria, Pitak Chenkosol

Dissertations and Theses

The stability criteria for single-mode standing-wave laser oscillators in the strongly homogeneously broadened limit are reported for the first time. Two types of stability criteria are presented. The first type, called type 1, corresponds to the minimum value of threshold parameter for which an infinitesimal perturbation away from steady state grows into an oscillatory solution. Another type of stability criteria, called type 2, corresponds to the minimum value of threshold parameter for which large amplitude oscillatory solutions do not decay to the steady state solution. Undamped pulsations in single mode strongly homogeneously broadened standing-wave laser oscillators are found to occur …

Performance Analysis Of Doa Estimation Algorithms Using Physical Parameters, Hui Liu

Dissertations and Theses

Analytical performance analysis on Direction-Of-Arrival (DOA) estimation algorithms has attracted much excellent research in recent years, various statistical properties have been revealed. However, in most of these analyses, insights of the performance were masked because of the involvement of singular values and singular vectors which depend on the character of the algorithms and data structures in a complex and nonlinear manner.

Bounds On Constraint Weight Parameters Of Hopfield Networks For Stability Of Optimization Problem Solutions, Gursel Serpen

Electrical & Computer Engineering Theses & Dissertations

The purpose of the presented research is to study the convergence characteristics of Hopfield network dynamics. The relation between constraint weight parameter values and the stability of solutions of constraint satisfaction and optimization problems mapped to Hopfield networks is investigated. A theoretical development relating constraint weight parameter values to solution stability is presented. The dependency of solution stability on constraint weight parameter values is shown employing an abstract optimization problem. A theorem defining bounds on the constraint weight parameter magnitudes for solution stability of constraint satisfaction and optimization problems is proved. Simulation analysis on a set of optimization and constraint …

A Generalized, Parametric Pr-Qmf/Wavelet Transform Design Approach For Multiresolution Signal Decomposition, Hakan Caglar

Dissertations

This dissertation aims to emphasize the interrelations and the linkages of the theories of discrete-time filter banks and wavelet transforms. It is shown that the Binomial-QMF banks are identical to the interscale coefficients or filters of the compactly supported orthonormal wavelet transform bases proposed by Daubechies.

A generalized, parametric, smooth 2-band PR-QMF design approach based on Bernstein polynomial approximation is developed. It is found that the most regular compact support orthonormal wavelet filters, coiflet filters are only the special cases of the proposed filter bank design technique.

A new objective performance measure called Non-aliasing Energy Ratio(NER) is developed. Its merits …

Error Detection And Correction In Compressed Data, Nadir Sezgin

Theses

Encoded data is very sensitive to the channel errors. Especially if the data is compressed by Arithmetic Encoding procedure, then the error propagation is very high. The error propagation in Arithmetic Coding is studied. Exploiting the high error propagation property when compressing data by Arithmetic encoding procedure, two different algorithms have been proposed for error detection and correction. Under certain conditions these algorithms detect and with a very high probability correct the errors introduced to the compressed data.

Computer Control For 2-Axis Magnetic Suspension System, Jian Chen

Theses

A two-axis magnetic suspension system. using linear-potentiometer position sensing and DC solenoids, controlled digitally by a 80386 microcomputer has been built and operated in our laboratory. Control algorithms obtained by combining the full-state feedback control law with two methods of estimating velocities are studied. One method uses a nonlinear reduced-order observer; the other uses a finite difference algorithm. The nonlinear reduced-order observer performs better in simulation but the difference algorithm takes less calculation time and is used in the implementation. The system has been operated successfully to suspend weights up to 1.2 lb. and to get a slant angle more …

Minimum-Time Control For Submarine Interception, Zaiping Chen

Theses

This thesis attempts to offer a possible improvement for conventional anti-submarine system which is mounted on warship. It consists of two parts: the control law and its realization concerning the particular problem. The control based on optimal theory is devised for three-dimentional minimum-time interception. A microprocessor system is also designed to achieve all necessary steps to track and attack the target. The thesis focuses on the question of how to launch a group of subcharges to destroy a submarine cruising under water: find the optimal trajectory by developing a numerical method to solve the nonlinear dynamic system and design a …

A Graphical Tool For The Simulation Of Timed Petri Nets, Javaid Aslam Siddiqi

Theses

A highly interactive graphical tool is developed for the drawing and simulation of discrete event systems involving time constraints. The Timed Petri Net Simulator tool (TPNS) is capable of simulating systems with deterministic and stochastic delays. Performance and utilization parameters are collected during simulation for behavior and analysis purposes. Simulation results are stored in different files (log, verify, utilize, and mark). Conflict resolution on the basis of priority or random selection of multiple transitions in conflict is implemented to handle complex modeling situations. A user friendly interface is developed for effective interaction between the tool and the user. This interface …

Temperature Regulation Post Hemorrhagic Shock In Rats : Atheoretical Analysis, Kahambwe Shungu

Theses

The adequacy of a mathematical model in simulating temperature regulation in rats after resuscitation from hemorrhagic shock is investigated. This model, proposed elsewhere, was devised to study temperature profiles during hyperthermia in humans.

Hemorrhagic shock was achieved by bleeding rats to an average mean arterial pressure (MAP) of 30mmHg. The rats were then maintained at this MAP for up to four hours by withdrawing or reinfusing the shed blood. One group (the control group), was allowed to return to normal body temperature after the shock episode without external intervention. A second group (microwave group) was irradiated, for an average of …

Position Recovery And Motion Analysis From Stereo Image Sequences, Yuxin Xie

Theses

Based on four stereo images, a new concept of unified optical flow field has been developed recently [3]. It is a generalization of the optical flow in stereo imagery. A set of fundamental equations is established to characterize the unified optical flow field. Another set of equations is then derived from which 3-D structure can be reconstructed and its motion can be analyzed by the use of the unified optical flow field quantities. In this thesis, we use some synthetic images of a rotated conical structure to study and test the theoretical results. The simulation and results are presented, thus …

Simulation And Modeling Of Kinetics Of Silicon Oxidation In The Thin Oxide Regime, Tirthankar Dutta

Theses

Thermal oxidation of Silicon in dry O₂, in the thin regime(< 500A) is of vital importance to VLSI device engineers, because thin layers of SiO₂ are exclusively used as gate dielectric for high performance of MOS devices. There exist a number of models to explain the kinetics of oxidation in this thin regime. However there is considerable variance among them and the reported rate constants, which are supposed to describe the oxidation process. Rather than arriving at an alternative model, the present study aims at an extensive study and simulation of existing models of oxidation in dry oxygen, in the thin regime, with a recent set of experimental data and …

Software Development For Analysis Of Stochastic Petri Nets Using Transfer Functions, Aman U. Jamwal

Theses

This thesis research is an implementation of a closed-form analytical technique for study, evaluation and analysis of Stochastic Petri Nets (SPN). The technique is based on a theorem that an isomorphism exists between an SPN and a Markov Chain. The procedure comprises five main steps: reachability graph generation of the underlying Petri net, transformation of the reachability graph to a state machine Petri net, calculation of transfer functions, computation of equivalent transfer functions via Mason's rule, and computation of performance parameters of the SPN model from the equivalent transfer functions and their derivatives. The software is developed in UNIX using …

Design Of An Advanced Control Algorithm For A Nuclear Power Plant Feedwater Control System, Randall C. Ezzo

Theses

Electric power companies with nuclear power plants have been aggressively looking for ways to increase plant safety and availability by increasing the reliability and performance of the plant's control systems. The performance of the Oyster Creek Nuclear Station's feedwater control system can be significantly improved by replacing the proportional-integral compensator with a compensator based on modern control concepts. In response to a -10 inch reactor water level setpoint change, settling time is improved from 107 seconds with 3% overshoot to 34 seconds with no overshoot.

Computer Aided Design Of A Broadband Microwave Power Divider, Jaideep Mukherjee

Theses

The purpose of this thesis to provide alternative design procedure for a power divider that has broadband characteristics. The Wilkinson power divider consisting of cascaded quarter wave sections is known to increase the bandwidth while maintaining high isolation and good match conditions at individual ports. Resistors placed between the quarter wave sections served to increase isolation. The values of required components were determined using odd and even mode analysis. In this work, the approximate theory developed previously is used as a preliminary design model, and it is extended further by considering optimization techniques and coupling between adjacent arms. This novel …

Extension And Applications Of Knitting Technique For Petri Net Synthesis, Yanzhong Zhang

Theses

Petri nets have been used for modeling and analyzing various systems [1,2,3,4,8]. One approach to Petri net synthesis is a knitting technique [4,5, 6,7]. It was developed for modeling concurrent systems. The Petri net model is incrementally expanded by adding paths of nodes according to rules. To extend the knitting technique to cover synchronized systems, a set of new rules based on synchronic distance concept is presented. The rules penult synchronizing M exclusive processes (M 2) to a synchronic distance of any positive integer N. They can be applied to both exclusive processes and independent processes. The resulting Petri net …

Vision-Guided Servoing Robot Arm System, Shing Lee

Theses

This thesis investigate the problem of tracking 2-D circle parts with an eye-in-hand robot arm system. A vision module capable of measuring the motion of a circle is developed. Two algorithms based on the conic equation representation of circle and the symmetric property are developed. The first algorithm approximates the image of the circle as an ellipse. The second algorithm use the arc radius estimator to extract two image points of the circle located at the center of the largest arc. These image points are then used to solve for the inverse perspective transformation. An inverse kinematics solution based on …

Ignoring Interprocessor Communication During Scheduling, Chintamani M. Patwardhan

Dissertations and Theses

The goal of parallel processing is to achieve high speed computing by partitioning a program into concurrent parts, assigning them in an efficient way to the available processors, scheduling the program and then executing the concurrent parts simultaneously. In the past researchers have combined the allocation of tasks in a program and scheduling of those tasks into one operation. We define scheduling as a process of efficiently assigning priorities to the already allocated tasks in a program. Assignment of priorities is important in cases when more than one task at a processor is ready for execution. Most heuristics for scheduling …

A Multiple Coupled Microstrip Transmission Line Model For High-Speed Vlsi Interconnect Simulation, Lawrence Stevan Uzelac

Dissertations and Theses

A model is presented which incorporates the advantages of a mixed mode simulation to characterize transmission line behavior in multiple coupled Transmission line systems. The model is intended for use by digital circuit designers who wish to be able to obtain accurate transmission line behavior for complex digital systems for which continuous time simulation tools such as SPICE would be time prohibitive.

The model uses a transverse electromagnetic wave approximation to obtain solutions to the basic transmission line equations. A modal analysis technique is used to solve for the attenuation and propagation constants for the transmission lines. Modal analysis done …

Composite Damage Assessment Employing An Optical Neural Network Processor And An Embedded Fiberoptic Sensor Array, Barry G. Grossman, Xing Gao, Michael H. Thursby

Electrical Engineering and Computer Science Faculty Publications

This paper discusses a novel approach for composite damage assessment with potential for DoD, NASA, and commercial applications. We have analyzed and modeled a two dimensional composite damage assessment system for real-time monitoring and determination of damage location in a composite structure. The system combines two techniques: a fiberoptic strain sensor array and an optical neural network processor. A two dimensional fiberoptic sensor array embedded in the composite structure during the manufacturing process can be used to detect changes in the mechanical strain distribution caused by subsequent damage to the structure. The optical processor, a pre-trained Kohonen neural network, has …

An Object-Oriented Database Implementation Of The Magic Vlsi Layout Design System, Timothy M. Jacobs

Theses and Dissertations

This thesis attempts to prove that the commercially available Object Store data management system provide the performance and functionality necessary to support a complex engineering design system. This is accomplished by modifying the Magic VLSI circuit layout design system to eliminate its current Unix file data management system and replace it with Object Store. The approach to this research effort includes a design recovery of the Magic system and identification of its ket data management functions. These functions are then modified to take advantage of the database management facilities of Object Store. Additional code is added to instrument performance measurement …

Lqg Control Of A Deformable Mirror Adaptive Optics System With Time- Delayed Measurements, David J. Anderson

Theses and Dissertations

This thesis proposes a linear quadratic Gaussian (LQG) control law for a ground-based deformable mirror adaptive optics system. The incoming image wavefront is distorted, primarily in phase, due to the turbulent effects of the earth's atmosphere. The adaptive optics system attempts to compensate for the distortion with a deformable mirror. A Hartman wavefront sensor measures the degree of distortion in the image wavefront. The measurements are input to a Kalman filter which estimates the system states. The state estimates are processed by a linear quadratic regulator which generates the appropriate control voltages to apply to the deformable mirror actuators. The …

Investigation Of The Effects Of Aeroelastic Deformations On The Radar Cross Section Of Aircraft, Samuel D. Mckenzie

Theses and Dissertations

The effects of aeroelastic deformations on the radar cross section (RCS) of a T-38 trainer jet and a C-5A transport aircraft are examined and characterized. Realistic representations of structural wing deformations are obtained from a mechanical/computer aided design software package called NASTRAN . NASTRAN is used to evaluate the structural parameters of the aircraft as well as the restraints and loads associated with realistic flight conditions. Geometries for both the non-deformed and deformed airframes are obtained from the NASTRAN models and translated into RCS models. The RCS is analyzed using a numerical modeling code called the Radar Cross Section - …