Digital Commons Network^™

Investigation Of Optical Properties Of Inp, Ain And Sapphire For Applications In Non-Contact Semiconductor Process Monitoring, Rajasekhar Velagapudi

Theses

The objective of this thesis was to develop a reliable multi-wavelength pyrometer for simultaneous measurement of the wafer temperature and its optical properties in the wavelength range of 1 to 20 microns and temperature range of 30 to 1500° C. The spectral emissometer has been utilized for measurement of the temperature dependent optical properties of InP, AlN and Sapphire. The experimental results presented in this thesis showed that the measurement of high temperature optical properties could be performed reliably with a novel approach using the spectral ernissometer. The temperature determination capability of the emissometer was tested and verified using a …

Performance Enhancement Of Linear Robotic Workcell Using Dsp Based Control, Kedar Arvind Godbole

Theses

Robotic Controllers have for the major part been computer implementations of PID or similar controllers. In this thesis DSP based control of a Robotic Workcell is presented. The control algorithms used with the DSP based controller are Input Shaping and also State Feedback. Input Shaping is a Feed Forward strategy for eliminating vibration under certain conditions. In this thesis Input Shaping is applied to the performance enhancement of a linear robot system. Although feedback control strategies offer higher accuracy and are much more robust, feedforward strategies offer possibilities for improving the response time. Input Shaping is successfully applied to the …

A Design-For Retirement Rating Model For Environmentally Conscious Products, Xin He

Theses

Design-For-Retirement is a concept that allows one to design a product such that its retirement time and post-life treatment are optimized to lead to the minimum environmental impact and maximum financial gain. Retired product parts or subassemblies face three primary multi-lifecycle engineering treatments. The first one is to recondition them for reuse in the next lifecycle. The second one is to convert their post life parts into a material form for recycling back into new parts. The last is to dump or landfill them. Each option has a significantly different environmental cost-benefit ratio. Another important concern is the dismantling process …

High-Resolution Image Reconstruction From A Sequence Of Rotated And Translated Frames And Its Application To An Infrared Imaging System, Russell C. Hardie, Kenneth J. Barnard, John G. Bognar, Ernest E. Armstrong, Edward A. Watson

Electrical and Computer Engineering Faculty Publications

Some imaging systems employ detector arrays that are not sufficiently dense to meet the Nyquist criterion during image acquisition. This is particularly true for many staring infrared imagers. Thus, the full resolution afforded by the optics is not being realized in such a system. This paper presents a technique for estimating a high-resolution image, with reduced aliasing, from a sequence of undersampled rotated and translationally shifted frames. Such an image sequence can be obtained if an imager is mounted on a moving platform, such as an aircraft. Several approaches to this type of problem have been proposed in the literature. …

Numerical, Image, And Signal Processing Algorithms Applied To Radar Rainfall Estimation, John Eugene Lane

Retrospective Theses and Dissertations

Since the advent of radar in the 1940s, it has been well known that water drops composing precipitation scatter microwaves in a predictable manner. This characteristic of early. radar has lead to the present day Weather Surveillance Radar (WSR-88D) or NEXRAD systems, operated by the National Weather Service (NWS). In parallel to the evolution of weather radar for measuring precipitation over large areas, remote networks of rain gauges have been deployed and managed by agencies such as the Florida Water Management Districts. Since the recent deployment of the NWS network of WSR-88D, as well as the recent launch of the …

Fuel Cells, Frederick J. Munster Jr.

Maine Collection

Fuel Cells

by Frederick J. Munster Jr.

Edited by: Mr. Christopher Carroll

Maine Department of Economic Development, Augusta, Maine, 1998.

Contents: Hydrogen / Hydrogen Safety / Electrolysis / Electrolyzers / History of Fuel Cells / How Fuel Cells Operate / Fuel Cell Types / Fuel Cell Electrochemistry / Power Systems / Fuel Cells in Transportation / Hydrogen Powered Internal Combustion Engines / Home, Garden, Education and Industry / For More Information / Glossary / References

Emission Of Excimer Radiation From Direct Current, High-Pressure Hollow Cathode Discharge, Ahmed El-Habachi, Karl H. Schoenbach

Bioelectrics Publications

A novel, nonequilibrium, high-pressure, direct current discharge, the microhollow cathode discharge, has been found to be an intense source of xenon and argon excimer radiation peaking at wavelengths of 170 and 130 nm, respectively. In argon discharges with a 100 μm diam hollow cathode, the intensity of the excimer radiation increased by a factor of 5 over the pressure range from 100 to 800 mbar. In xenon discharges, the intensity at 170 nm increased by two orders of magnitude when the pressure was raised from 250 mbar to 1 bar. Sustaining voltages were 200 V for argon and 400 V …

Generation Of Intense Excimer Radiation From High-Pressure Hollow Cathode Discharges, Ahmed El-Habachi, Karl H. Schoenbach

Bioelectrics Publications

By reducing the diameter of the cathode opening in a hollow cathode discharge geometry to values on the order of 100 μm, we were able to operate these discharges in noble gases in a direct current mode up to atmospheric pressure. High-pressure discharges in xenon were found to be strong sources of excimer radiation. Highest intensities at a wavelength of 172 nm were obtained at a pressure of 400 Torr. At this pressure, the vacuum ultraviolet (VUV) radiant power of a single discharge operating at a forward voltage of 220 V and currents exceeding 2 mA reaches values between 6% …

Attitude Measurement, Mark A. Stedham, Partha P. Banerjee, Seiji Nishifuji, Shogo Tanaka

Electrical and Computer Engineering Faculty Publications

In many practical situations, it is important to determine and measure the attitude of a particular vehicle, such as a ship, an airplane, a piece of mechanical equipment such as a, crane lifter, or a spacecraft. For this reason, many attitude sensors have been developed with advanced computer and semiconductor technologies. This section first introduces the various attitude sensors with an explanation of their operating principles and then presents several methodologies for attitude measurement and determination, including ships and crane lifters, aircraft, and spacecraft applications.

Functional Radionuclide Imaging Algorithm Based On The Appended Curve Deconvolution Technique And Its Use In The Diagnosis Of Renovascular Hypertension, İrfan Karagöz, Hi̇kmet Bayhan

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, a new method called the pixel basis functional radionuclide imaging (PBFRI) algorithm based on the appended curve deconvolution technique, in order to be able to increase the medical diagnostic capability of a conventional gamma camera, is presented together with the clinical results. In the PBFRI method, retention function of each pixel is obtained from the renograms and cardiac curves generated by processing the filtered segments of the kidney and heart, using a special deconvolution method. The deconvolution operation is done by using the Fourier transform technique. High frequency artifacts presented by the Fourier transform are removed by …

Genetic Approach For The Determination Of Object Parameters From X Ray Projections, Tayfun Günel, Sedef Kent

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, a new method is presented, based on genetic algorithms for determining object parameters such as radii and/or attenuation coefficients with some assumptions and estimating a cross-sectional image of an object from its projections obtained by X ray illumination. After it was tested for projections degraded by different random noise levels, it was observed that the genetic and fuzzy genetic algorithms improved the signal to noise ratio of the projections. The fuzzy genetic algorithm gave better results than the genetic algorithm.

An Interoperability Infrastructure For Developing Multidatabase Systems, Asuman Doğac, Gökhan Özhan, Ebru Kılıç, Fatma Özcan, Sena Nural, Sema Mancuhan, Cevdet Dengi, Pınar Köksal, Uğur Halıcı, Budak Arpınar, Cem Evrendilek, Vahid Sadjadi

Turkish Journal of Electrical Engineering and Computer Sciences

A multidatabase system (MDBS) allows the users to simultaneously access autonomous, heterogeneous databases using a single data model and a query language. This provides for achieving interoperability among heterogeneous, federated DBMSs. In this paper, we describe the interoperability infrastructure of a multidatabase system, namely METU Interoperable DBMS (MIND). The architecture of MIND is based on OMG distributed object management model. It is implemented on top of a CORBA compliant ORB, namely, ObjectBroker. The interface of the generic database object is defined in CORBA IDL and multiple implementations of this interface, one for each component DBMSs, namely, Oracle 7, Sybase, Adabas …

Performance Of Prefiltered Model-Based Frequency Estimators, Mustafa A. Altınkaya, Bülent Sankur, Emin Anarım

Turkish Journal of Electrical Engineering and Computer Sciences

In this work, the performance improvement due to prefiltering of inputs in model-based frequency estimators is investigated based on simulation experiments. Initial estimates on the tone frequency locations, which are obtained via DFT peak picking type preanalysis, are used to design a prefilter to remove noise and interference. The simulations indicate that prefiltering can improve the accuracy of Pisarenko and AR frequency estimators and MUSIC and KT frequency estimators with low subspace order significantly. The SNR thresholds of model-based frequency estimators are lowered by prefiltering. Additionally, interesting trade-offs between prefiltering gain and the gain due to subspace noise filtering have …

Analysis Of Images Of Cells With Neurites, Florence Cloppet, Georges Stamon

Turkish Journal of Electrical Engineering and Computer Sciences

This study is concerned with the segmentation of cytological images and extraction of cellular entities in order to provide quantitative data about the number of cells in culture (statistical tests, morphology, model of evolution, etc). This quantitative supply is useful in biology to evaluate the consequences of the application of active substances on morphological changes and cellular viability. It is related to the conception of a system dedicated to automatic analysis of cell images, in order to evaluate the effects of drugs on the morphology of neuronal cells. We use a cooperative region / contour segmentation, which gives closed polygonal …

Imaging Electrical Current Density Using Nuclear Magnetic Resonance, B. Murat Eyüpoğlu, Ravinder Reddy, John S. Leigh

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, images of nonuniform and uniform electric current density in conductor phantoms, which contain magnetic resonance active nuclei, are produced using Magnetic Resonance Imaging (MRI). A standard spin echo pulse sequence is used, with the addition of a bipolar current pulse. The flux density parallel to the main magnetic field, generated by the current pulse, is encoded in the phase of the complex MR image. The spatial distribution of magnetic flux density is extracted from the phase image. Current density is calculated using the magnetic flux density. This fairly recent technique is known as Magnetic Resonance Current Density …

Use Of The Magnetic Field Generated By The Internal Distribution Of Injected Currents For Electrical Impedance Tomography (Mr-Eit), Y. Zi̇ya İder, Özlem Bi̇rgül

Turkish Journal of Electrical Engineering and Computer Sciences

In two dimensional conventional Electrical Impedance Tomography (EIT), volume conductor is probed by means of injected currents, and peripheral voltage measurements are used as input to the reconstruction algorithm. The current that flows in the 2D object creates magnetic fields that are perpendicular to the plane of imaging. Such magnetic fields can be measured using magnetic resonance tomography. In this study, use of this magnetic field generated by the injected currents, for the purpose of reconstructing the conductivity distribution, is studied. Sensitivity matrix relating the magnetic field to the element conductivities is calculated using the Finite Element Method and Biot-Savart …

Fdtd Evaluation Of The Sar Distribution In A Human Head Near A Mobile Cellular Phone, Selçuk Paker, Levent Sevgi̇

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, Finite-Difference Time-Domain (FDTD) method is used to calculate the Specific Absorbtion Rate (SAR; defined as the power absorbed by unit mass of the tissue) distribution in a human head near a hand-held cellular phone. A three dimensional FDTD algorithm is built in cartesian coordinates. A discrete human head model, derived from a Nuclear Magnetic Resonance (NMR) image by semi-automatic algorithm, is located within FDTD volume together with a discrete hand-held receiver model. FDTD simulations are carried out for both european GSM (operating at 900MHz) and DECT (operating at 1.8GHz) systems with a quarter-wavelength antenna, mounted on top …

Cardiac Passive Acoustic Localization: Cardiopal, Yildirim Bahadirlar, Hali̇l Özcan Gülçür

Turkish Journal of Electrical Engineering and Computer Sciences

A novel non-invasive system is proposed as an adjunct diagnostic tool for cardiac disorders, which is based on processing of the heart sounds acquired using a specially designed 2-D passive acoustic array. In addition to the acoustic array, the system consists of a personal computer, specially developed instrumentation and interface hardware and an adaptive array processing scheme. A signal model is constructed in accordance with the basic assumptions made for very near-field low frequency sources. The multiple signal characterization (MUSIC) method together with the model is used for the localization of assumed point sources in the heart. Locations of the …

Development And Saw Device Implementation Of A New Weighted Stepped Chirp Code Signal For Direct Sequence Spread Spectrum Communications Systems, Scott Edward Carter

Retrospective Theses and Dissertations

This work introduces the new weighted stepped chirp code signal for direct sequence spread spectrum (DS/SS) communications systems. This code signal uses the truncated cosine series functions as the chip functions. This code signal is the result of discretizing a continuous wave (CW) chirp which results in enhanced performance versus a pseudonoise (PN) code and equivalent performance and easier implementation than a CW chirp. This code signal will be shown to possess improved compression ratio (CR), peak sidelobe level (PSL), integrated sidelobe level (ISL), and bit error rate (BER) when compared to a PN code of identical code length and …

Electromagnetic Scattering From Coated Strips Utilizing The Adaptive Multiscale Moment Method, C. Shu, T. K. Sarkar

Electrical Engineering and Computer Science - All Scholarship

The aim of this paper is to consider the problem of electromagnetic scattering from perfectly conducting strips coated with thin dielectric material by use of the adaptive multiscale moment method (AMMM). In the next section, the basic formulation is presented for analysis of scattering from coated conducting strips on the basis of a coupled system of electric- and magnetic-field integral equations. Section 3 outlines the computational methodology of the multiscale basis by use of the moment method. Section 4 presents AMMM to solve the coupled EM integral equations. Section 5 presents a variety of numerical examples for different coating strips …

Object-Oriented Computer Simulations Of Physical Systems Using Dual Reciprocity Boundary Element Methodology, J. Friedrich

Turkish Journal of Electrical Engineering and Computer Sciences

Models of physical systems are essential in every engineering field. This work deals with computer simulations of physical systems that can be mathematically modelled by differential equations together with sufficient boundary conditions. The computer simulations are based on object-oriented technology and the dual reciprocity boundary element method which is a universal solution scheme for various types of partial differential equations (e.g. Laplace, Poisson, diffusion, convection-diffusion, and steady Navier-Stokes equation). This technique fulfills efficiency criteria like precision, robustness, versatility, programmability, user-friendliness, need of computational time and computer memory to a very high degree. This is demonstrated by three examples: Laplace's solution …

Distribution System Planning Usign Mixed Integer Programming, Belgin Türkay

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents an improved mathematical model to optimise the size and locations of substations and the network routing problem. The model was formulated to minimise the total cost of the network by determining the optima of the substation locations and power, the load transfers between the demand centers, the feeder routes and the load flow in the network subject to a set of constraints. The computational results of a devised sample problem indicate that the developed optimisation model and its code are adequate for computer aided planning of distribution systems.

Analysis Of Nonlinear Sustained Oscillations In Discrete Systems With Backlash And Resolution By Using A Discretization-Oriented Describing Function, M. De La Sen, A. Pena, J. Esnaola

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, a discretization-oriented describing function is derived for nonlinear devices combining backlash and quantization (resolution) while being subject to discretization through a sampler and zero-order hold. Such a describing function is frequency-dependent so that the overall nonlinearity, which includes both resolution and backlash, is interpreted as possessing nonlinear inertia. That nonlinear inertia is generated by the sampling process, since it does not appear if the system is continuous. The presence of nonlinear sustained oscillations (limit cycles) is investigated through simulations.

Signal Injection With Perceptual Criteria, T. Engi̇n Tuncer

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, a novel method for increasing the coding performance and information transmission capacity is presented. This method is mainly based on perceptual modelling of input signal such as speech or audio. Presented approach may be seen as an alternative to transforms which dynamically change analysis window for better energy compaction. A perceptual model is established in order to obtain a global masking threshold in frequency below which sounds become inaudible. Certain criteria are developed for identifying the signal injection bands. A new multiband filter design method which is a generalization of windowing method is used to separate the …

State Of Art In Realistic Head Modeling For Electro-Magnetic Source Imaging Of The Human Brain, Nevzat G. Gençer, İ. Oğuz Tanzer, M. Kemal Özdemi̇r, Can E. Acar, Mert Sungur

Turkish Journal of Electrical Engineering and Computer Sciences

Electric currents produced by the neural activity in the brain create electric potentials on the scalp and magnetic field distribution outside the scalp. Measuring electric and magnetic fields provides a means to understand the spatio-temporal distribution of the neural activity. The representations of the intracellular electric current of active cell populations based on bimodal data are called electro-magnetic source image (EMSI). With the recent development of large arrays of magnetic sensors, and systems for measuring scalp voltages at more than 100 locations, it is now feasible to implement computational methods that employ numerical models which incorporate the correct geometry and …

Surface Morphology Of Laser-Superheated Pb(111) And Pb(100), Z. H. Zhang, Bo Lin, X. L. Zeng, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The surface step density on the vicinal Pb(111) and the surface vacancy density on Pb(100) after laser superheating and melting are investigated using reflection high-energy electron diffraction. With ∼100-ps laser pulses, Pb(111) surface superheating does not significantly change the density of the steps and step-edge roughness. However, after laser surface melting, the average terrace width and the string length at the step edge become as large as those at room temperature. The average terrace width at 573 K changes from 38±15 to 64±19 Å after laser surface melting, while the average string length at the step edge changes from 90±14 …

Femtosecond Photoemission Study Of Ultrafast Electron Dynamics In Single-Crystal Au(111) Films, J. Cao, Y. Gao, H. E. Elsayed-Ali, R. J. D. Miller, D. A. Mantell

Electrical & Computer Engineering Faculty Publications

The energy-dependent relaxation of photoexcited electrons has been measured by time-resolved two-photon photoemission spectroscopy on single-crystal Au(111) films with thickness ranging from 150 to 3000 Å. It is found that the energy-dependent relaxation does not show any significant thickness dependence, which indicates that electron transport is a much slower dynamical process in the near-surface region than expected from bulk properties. Furthermore, lifetimes of the photoexcited electrons can be fitted well by the Fermi-liquid theory with a scaling factor plus an effective upper lifetime. This observation enables separation of electron-electron scattering, and to a lesser extent electron-phonon scattering, processes from electron-transport …

An Approach To Exact Modeling Of The Pwm Switch, Anas N. Al-Rabadi

Dissertations and Theses

Large number of small-signal models of de-to-de power converters exists already. These models usually use two techniques. The first is the averaging technique, such as: volt-second and current-second balance, state space averaging, and the averaged modeling approach. The other technique focuses on the exact modeling approach, such as: the application of time varying systems theory to linearize networks. One of the methodologies to apply the above techniques, is to view the three-terminal systems as a two-port network.

The aim of the work presented in this thesis is to develop a new approach, by the application of the two-port network methodology …

Gaas Implementation Of Fir Filter, Anup Savla

Theses : Honours

This thesis discusses the findings of the final year project involving Gallium Arsenide implementation of a triangular FIR filter to perform discrete wavelet transforms. The overall characteristics of Gallium Arsenide technology- its construction, behaviour and electrical charactersitics as they apply to VLSI technology - were investigated in this project. In depth understanding of its architecture is required to be able to understand the various design techniques employed. A comparison of Silicon and GaAs performance and other characteristics has also been made to fully justify the choice of this material for system implementation. A lot of research and active interest has …

Adaptive Shape From Shading, Ati̇lla Gülteki̇n, Muhi̇tti̇n Gökmen

Turkish Journal of Electrical Engineering and Computer Sciences

Extracting surface orientation and surface depth from one or more images is one of the classic problems in computer vision. Shape-from-shading (SFS) deals with the recovery of 3-D shape from a single shaded image. The shape is recovered by minimizing an energy functional involving constraints such as smoothness. In this constrained problem, although the smoothness constraint helps to stabilize the minimization process, it pushes the reconstruction toward a smooth surface. In this paper, we present a new adaptive shape-from-shading method which reduces this oversmoothing by controlling the smoothness spatially over the image space. In order to improve the quality of …