Digital Commons Network^™

Rotation-Invariant Synthetic Discriminant Function Filter For Pattern Recognition, Vahid R. Riasati, Partha P. Banerjee, Mustafa A. G. Abushagur, Kenneth B. Howell

Electrical and Computer Engineering Faculty Publications

The ring synthetic discriminant function (RSDF) filter for rotation-invariant response is discussed for pattern recognition. This method uses one half of a slice of the Fourier transform of the object to generate the transfer function of the filter. This is accomplished by rotating the one half of a slice in the Fourier domain through 2π rad about the zero-frequency point of the Fourier plane. This filter has the advantage of always matching at least one half of a slice of the Fourier transform of any rotation of the image. An analytical discussion of the filter construction and correlation results are …

3d Outside Cell Interference Factor For An Air-Ground Cdma ‘Cellular’ System, David W. Matolak

Faculty Publications

We compute the outside-cell interference factor of a code-division multiple-access (CDMA) system for a three-dimensional (3-D) air-to-ground (AG) "cellular-like" network consisting of a set of uniformly distributed ground base stations and airborne mobile users. The CDMA capacity is roughly inversely proportional to the outside-cell interference factor. It is shown that for the nearly free-space propagation environment of these systems, the outside-cell interference factor can be larger than that for terrestrial propagation models (as expected) and depends approximately logarithmically upon both the cell height and cell radius.

Emi Reduction From Airflow Aperture Arrays Using Dual-Perforated Screens And Loss, Min Li, Joe Nuebel, James L. Drewniak, Todd H. Hubing, Richard E. Dubroff, Thomas Van Doren

Electrical and Computer Engineering Faculty Research & Creative Works

Airflow perforations in shielding enclosures can act as apertures facilitating the coupling from internal sources to external electromagnetic interference (EMI). This EMI radiation for single- and dual-screen configurations was studied herein experimentally and with finite-difference time-domain (FDTD) modeling. A general EMI reduction of more than 20 dB was achieved for dual-perforated screens spaced 1 cm apart when compared to EMI for a single perforated screen. However, in the dual-screen case, the space between the screens can act as a thin cavity, which, in turn, can lead to significant radiation at distinct angles. Damping the resonances by loading the space between …

Fdtd Modeling Of Lumped Ferrites, Min Li, Xiao Luo, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

Implementing ferrites in finite-difference time-domain (FDTD) modeling requires special care because of the complex nature of the ferrite impedance. Considerable computational resources and time are required to directly implement a ferrite in the FDTD method. Fitting the ferrite impedance to an exponential series with the generalized-pencil-of-function (GPOF) method and using recursive convolution is an approach that minimizes the additional computational burden. An FDTD algorithm for a lumped ferrite using GPOF and recursive convolution is presented herein. Two different ferrite impedances in a test enclosure were studied experimentally to demonstrate the FDTD modeling approach. The agreement is generally good.

Cramer-Rao Bound And Optimal Amplitude Estimator Of Superimposed Sinusoidal Signals With Unknown Frequencies, Shaohui Jia

Doctoral Dissertations

This dissertation addresses optimally estimating the amplitudes of superimposed sinusoidal signals with unknown frequencies. The Cramer-Rao Bound of estimating the amplitudes in white Gaussian noise is given, and the maximum likelihood estimator of the amplitudes in this case is shown to be asymptotically efficient at high signal to noise ratio but finite sample size. Applying the theoretical results to signal resolutions, it is shown that the optimal resolution of multiple signals using a finite sample is given by the maximum likelihood estimator of the amplitudes of signals.

Efficient Algorithms And Implementations For Signal Processing, Changbai Xiao

Doctoral Dissertations

A scheme is presented to regain a finite number of lost samples from a Nyquist-rate-sampled band-limited signal f of finite energy by replenishing new sample values of the same number. The result can also be viewed as the solution to a special non-uniform sampling problem.

A scheme is also presented to recover a band-limited function f of finite energy from its sampling values on real sequences with an accumulation point. The result given here can also be viewed as an approach to the extrapolation problem of determination a band-limited function in terms of its given values on a finite interval. …

Theory Of Sic Schottky Barrier Conduction And Model Analysis For Diode Breakdown With And Without Screw Dislocations, Lifeng Zheng

Electrical & Computer Engineering Theses & Dissertations

Silicon Carbide is a very promising candidate for applications in high-power, high-temperature, and high-radiation conditions under which conventional semiconductors cannot perform adequately. However, the SiC processing technology has not yet reached maturity. There is also limited knowledge of its physical and chemical characteristics, and its device behavior is not well understood. The aim of this thesis is to analyze two specific problems in the SiC area. The first issue involves the large discrepancy between experimental I - V characteristics of SiC Schottky diodes and their theoretical values. The observed data, especially at low voltages, is found to be orders of …

Application Of Linear Matrix Inequalities In The Control Of Smart Structural Systems, Sridhar Sana, Vittal S. Rao

Electrical and Computer Engineering Faculty Research & Creative Works

Natural frequency variations, unmodeled dynamics and control input constraints are some of the major problems in the design of controllers in smart structural systems. The performance and robustness of the closed-loop system are often constrained by the limited actuation force available from Lead Zirconate Titanate (PZT) actuators. Hence, it is desirable to design controllers to maximize the performance and robustness without violating the control input constraints. In this paper, we give a methodology for designing output feedback robust controllers for smart structural systems using Linear Matrix Inequalities (LMIs). A procedure is developed to incorporate the real parameter uncertainty resulting from …

Unmanned Research Vehicle (Urv): Development, Implementation, & Flight Test Of A Mimo Digital Flight Control System Designed Using Quantitative Feedback Theory, Constantine H. Houpis, Steven J. Rasmussen

Faculty Publications

The Quantitative Feedback Theory (QFT) design technique, which has the ability to bridge the gap between theory and the real-world control design problem, is utilized in the design of a MIMO digital flight control system for an unmanned research vehicle (URV) that is presented in this paper. The design illustrates how the real-world knowledge of the plant to be controlled and the desired performance specifications can be utilized in trying to achieve a successful robust design for a nonlinear control problem. This paper presents some of the issues involved in developing, implementing, and flight testing a flight control system (FCS) …

Nonuniformly Spaced Array Elements, Daniel R. Richards Jr.

Theses and Dissertations

This thesis provides a method to reduce physical resource requirements along with cost reduction in Space Based Radar (SBR) platforms, and provides a rule of thumb for randomization effects on arrays. A trend analysis is performed on 4, 8, 12, and 16 square meter arrays. Three aperiodic thinning approaches are examined. They are an equal current density element distribution, a random periodic grid of elements, and random element distribution based a peak sidelobe indicator. According to the metrics used, the statistical and deterministic array thinning approaches performed best for these small arrays. However, the statistical arrays have a scan angle …

Investigation Of Conformal High-Impedance Ground Planes, Michael A. Saville

Theses and Dissertations

Applique antennas are a long range vision for military vehicles because they are lighter, quicker to replace, less expensive, and can have better performance than conventional antennas. Two newly reported high-impedance ground planes have potential to begin the realization of the applique antenna vision and each is investigated for use with thin conformal antenna structures. Bistatic reflection measurements completely characterize the high-impedance region of planar, thumbtack high-impedance ground planes, and periodic moment method models validate the measurement results. Rigorous planar and conformal surface wave coupling measurements clarity the reported photonic band gap behavior of the thumbtack high-impedance ground plane, and …

Tool-Based Integration And Code Generation Of Object Models, Michael Ray Ashby

Theses and Dissertations

Today many organizations are faced with multiple large legacy data stores in different formats and the need to use data from each data store with tools based on the other data stores' formats. This thesis presents a tool-based methodology for integrating object-oriented data models with automatic generation of code. The generated code defines a global data format, generates views of global data in individual integrated data formats, and parses data from individual formats to the global formats and from the global format to the individual formats. This allows for legacy data to be translated into the global format, and all …

In Situ Ellipsometry Growth Characterization Of Dual Ion Beam Deposited Boron Nitride Thin Films, E. Franke, Mathias Schubert, John A. Woollam, J.-D. Hecht, G. Wagner, H. Neumann, F. Bigl

Department of Electrical and Computer Engineering: Faculty Publications

Pure hexagonal h, as well as mixed-phase cubic/hexagonal c/h boron nitride (BN) thin films were deposited onto [001] silicon substrates using the dual ion beam deposition technique. The BN thin films were grown under UHV conditions at different substrate temperatures and ion beam bombarding parameters. Thin-film growth was monitored using in situ spectroscopic ellipsometry at 44 wavelengths between 420 and 761 nm. The in situ ellipsometric Ψ and Δ data were compared with two-layer growth model calculations for the mixed-phase c/h BN, and with one-layer growth model calculations for pure h-BN growth. In situ data provide information on …

Evaluation Of A Method For Kinematic Gps Carrier-Phase Ambiguity Resolution Using A Network Of Reference Receivers, Brian L. Bracy

Theses and Dissertations

New applications for GPS have driven a demand for increased positioning accuracy. The emerging GPS technology particularly affects the test community. The testing equipment and method must provide a solution that is an order of magnitude more precise than the tested equipment to achieve the desired accuracy. Carrier-phase differential GPS methods using a network of reference receivers can provide the centimeter-level accuracy required over a large geographical area. This thesis evaluates the performance of a 5-receiver network over a 50 km x 120 km area of New Mexico, using a GPS network algorithm called NetAdjust. The percentage of time a …

Design And Validation Of An Accurate Gps Signal And Receiver Truth Model For Comparing Advanced Receiver Processing Techniques, Phillip Martin Corbell

Theses and Dissertations

Recent increases in the computational power of computers and digital signal processors have made possible new, novel signal tracking techniques in GPS receivers. One such technique is known as Direct Correlators Output Processing (DCOP). This technique replaces individual traditional tracking loops with a single Kalman Filter, which jointly processes the received signals while exploiting their correlated noises. DCOP is innovative in its potential to replace the tried and true classical signal tracking loops. It is also an enabling technology for ultra-tightly coupled GPS/INS (Global Positioning System/Inertial Navigation System). Potential benefits of these new tracking techniques include an order-of-magnitude improvement in …

Emi Model Validation And Standard Challenge Problems, Bruce Archambeault, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

A joint effort of the IEEE/EMC Society TC-9 Committee and the Applied Computational Electromagnetic Society (ACES) resulted in a central web location for contributors who will provide model and measurement data to share and compare with others. In addition to the data repository, a set of standard challenge problems have been proposed over the past few years, and are located at the web site. The site will be carefully monitored by a review committee to insure only high-quality information is posted on the site.

Modeling Emi Resulting From A Signal Via Transition Through Power/Ground Layers, Wei Cui, Xiaoning Ye, Bruce Archambeault, Doug White, Min Li, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

Signal transitioning through layers on vias are very common in multi-layer printed circuit board (PCB) design. For a signal via transitioning through the internal power and ground planes, the return current must switch from one reference plane to another reference plane. The discontinuity of the return current at the via excites the power and ground planes, and results in noise on the power bus that can lead to signal integrity, as well as EMI problems. Numerical methods, such as the finite-difference time-domain (FDTD), Moment of Methods (MoM), and partial element equivalent circuit (PEEC) method, were employed herein to study this …

Cathodic Indirect Electro-Oxidation——Organic Electro-Synthesis Dimethyl Sulfone, Deng-Ping Gu, Rui-Zhi Wang, Hong-Kun Zhang, Xue-Ying Zhang, Wei Li, Bao-Qiu Cui

Journal of Electrochemistry

A cathodic indirect electro-oxidation system was established for indirect electro-oxidize dimethyl sulfoxide to dimethyl sulfone with electro-eduction generated H₂O₂ catalyzed by the pertungstate/tungstate (WO₅^2-/WO₄^2-) redox mediator. Influences of current density, pH, temperature, and the current efficiencies etc. On the cathodic indirect electro-oxidation of dimethyl sulfone were investigated for determining optimum reaction conditions. The current efficiency reached more than 70%. Mother-liquid could be recycled to use without pollution.

Effect Of Different Species Of Cobalt Additive On Performance Of Nickel Hydroxide Electrode, Xian-Xia Yuan, Yin-Dong Wang, Feng Zhan

Journal of Electrochemistry

Performances of nickel electrodes when adding or without adding Cobalt in different forms were studied, the results were interpreted by cyclic voltammetry(CV) and electrochemical impedance spectroscope (EIS). It was demonstrated that the additions of Co, CoO, CoO+Co by mechanically mixing with Ni(OH)₂ all can improve the performance of nickel electrode to some extent, and when Co is added in the form of CoO the best performance can be obtained. This can be mainly attributed to the fact that three kinds of Co additives all improved the structure of nickel hydroxide and the ability of H⁺ in electrolyte transporting …

The Study On Fabricating Thin Electrodes For Polymer Electrolyte Membrane Fuel Cells (Pemfc), Yong-Sheng Yang, Jing-Hua Liu, Chang-Peng Liu, Gong-Quan Sun, Chang-Zhi Li, Tian-Hong Lu

Journal of Electrochemistry

To lower platinum loading in electrodes for polymer electrolyte membrane fuel cell, a new thin electrode fabrication technique (TEFT) was developed in this work. A series of low Pt loading electrodes with smooth and uniformed surface were fabricated by the TEFT. As a result, the maximum power density of the cell with platinum loading of 1 mg/cm² and Nafion 117 membrane as electrolyte was up to 0.3 W.cm^-2. Moreover, the effects of PTFE and Nafion content in cathodes on the performance of PEMFC with low Pt loading electrodes (1 mg Pt/cm²) were examined systematically.

Studies On Electrochemical Synthesis Of 4,5-Disubstituted-1,2- Benzoquinones And The Reaction Mechanism, Xian-Zhang Bu, Gui-Wu Xiao, Lin Ma, Xing-Chum He, Ling-Quan Gu

Journal of Electrochemistry

The oxidation peak potentials (E_p) of alinine derivates and catechol in 0.1 mol/L KCl+15% alcohol solution were measured by cyclic voltammograms technique. The electrochemical oxidation condition was set according to the E_p. Three derivates of 4,5-disubstituted -1,2-benzoquinones were prepared via electrochemical oxidation-Michael addition reaction. The possible mechanism of electrochemical oxidation-Michael addition reaction is presented.

Electro-Oxidation Of Glyoxal To Glyoxalic Acid, Yin-Sheng Chen, Xin-Sheng Zhang, Jun Hu, Ying-Chun Dai

Journal of Electrochemistry

An investigation has been made to obtain the glyoxalic acid by the electrochemical oxidation of glyoxal solution with hydrochloric acid under various experimental conditions.The cell used consists of a lead cathode, a DSA anode and a cation-exchange membrane of model CM001. The current efficiency and yield for glyoxalic acid generation were 80.0% and 91.1% respectively, under optimal operating conditions: velocity of electrolyte flow 1.4 m·s^-1 ,current density 450 A·m^-2, temperature 30～40 ℃, initial concentration of glyoxal and hydrochloric acid 9.1%～16.0%, 4%～6%, respectively.

Studies Of The Preparation Of Electrodes From Lead Carbonate For Lead-Acid Battery Ⅱ. The Preparation Of Paste Electrodes, Zhong-Xu Dai, Di-Hua Wang, Hao-Hao Ke, Jin-Yun Zou, Yun-Hong Zhou

Journal of Electrochemistry

The positive and negative pastes were prepared by mixing PbCO₃ and H₂SO₄ solution as well as relative additives, respectively. The effects of the various formation methods and the charge/discharge conditions on discharge capacity and active material utilization of both electrodes were examined. The results indicate that the performance of the positive electrode formed at 2.0 mA/cm² is better than that formed at higher current density under the same charge/discharge condition, the PAM utilization reaches 74.4 % under discharging at 2.0 mA/cm²; and the property of the negative electrode formed by unsymmetrical square wave …

Sprayed And Thermally Evaporated Carbon Films As Anodes For Lithium Ion Batteries, Shu-Gao Zhang, M.Schleich Donald

Journal of Electrochemistry

Carbon films were made using spray-thermal evaporation from a kind of pyrolytic carbon powder. The films obtained with graphite structure were both potentio-statically and galvanostaically tested. Cycling patterns indicated a reduction peak on the first cycle corresponding to the formation of solid electrolyte interface, and the capacity values and x values were quite acceptable compared to theoretical ones when charging-discharging current density was suitable. Based on the experimental results, the obtained carbon films could be used as anode materials for relatively determining the electrochemical performances of cathode materials.

Electrochemical Characterization Of Ir-Ta-Ti Metal Oxide Coated Titanium Anodes, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen

Journal of Electrochemistry

Ir-Ta-Ti metal oxide coated titanium anodes of variable composition were prepared by thermal decomposition. Their micro morphorogies and electrochemical properties were characterized by scanning electron microscope, open circuit potential, cyclic voltammetry, consumption rate measurements and accelerated life test. The SEM results indicated that all coatings were of a porous and cracked-mud microstructure influenced greatly by the composition of coatings. The electrochemical measurements showed that the Ir-Ta-Ti ternary oxide-coated anodes exhibited excellent electrochemical activity and electrochemical stability in both acidic media and seawater which were affected by the composition and microstructure of the coatings. Owing to good corrosion resistance and low …

Fabrication And Examination Of Reduced Temperatrue Solid Oxide Fuel Cell Using A Supported Thin Ysz Electrolyte Substrate, Yi-Huang Zhang, Yong-Lei Dong, Yi Jiang, Zhi-Gui Lu, Jing-Wang Yan

Journal of Electrochemistry

By using a cost-effective wet process,dense yttria stabilized zirconia (YSZ) films on Ni-YSZ anode substrates have been prepared successfully. The YSZ film was characterized to be around 10 μm in thickness, sufficiently dense, uniform and crack free. A single solid oxide fuel cell fabricated from the supported YSZ film electrolyte on the anode substrate and a LSM cathode prepared on the YSZ film was tested. The power density reached to 0.1 W/cm² at 800 ℃, showing a reasonable performance. Further analysis on both electrodes shows that the anodic overpotential was much larger than IR drop (including YSZ resistance and …

Investigations Of Lithium Ion Battery Electrolyte Solution, Jing-Li Han, Qing-Guo Liu

Journal of Electrochemistry

Synthesis and electrochemical investigations of {LiB[(SO₃)C₆H₃(O)(COO)]OC₆H₅} in EC/DMC or DMSO/PC mixtures are presented.

On The Assessment Of Stability And Patterning Of Speech Movements, Anne Smith, Michael T. Johnson, Clare Mcgillem, Lisa Goffman

Electrical and Computer Engineering Faculty Research and Publications

Speech requires the control of complex movements of orofacial structures to produce dynamic variations in the vocal tract transfer function. The nature of the underlying motor control processes has traditionally been investigated by employing measures of articulatory movements, including movement amplitude, velocity, and duration, at selected points in time. An alternative approach, first used in the study of limb motion, is to examine the entire movement trajectory over time. A new approach to speech movement trajectory analysis was introduced in earlier work from this laboratory. In this method, trajectories from multiple movement sequences are time- and amplitude-normalized, and the STI …

Emi From Cavity Modes Of Shielding Enclosures-Fdtd Modeling And Measurements, Min Li, Joe Nuebel, James L. Drewniak, Richard E. Dubroff, Todd H. Hubing, Thomas Van Doren

Electrical and Computer Engineering Faculty Research & Creative Works

Electromagnetic interference (EMI) from slots and apertures resulting from coupling of interior sources through enclosure cavity modes in a rectangular test enclosure is reported herein. EMI from a specially designed test enclosure with slots or apertures excited by interior sources was studied experimentally and with finite-difference time-domain (FDTD) modeling. The measurements and FDTD modeling agree well. The results indicate that radiation at cavity mode resonances through slots and apertures of nonresonant dimensions can be as significant as the radiation at aperture or slot resonances. The agreement between the FDTD modeling and measurements demonstrates the usefulness of FDTD for investigating aspects …

Multi-User Detection For Multi-Rate Ds/Cdma Systems, Jinwen Ma

Dissertations

Wireless cellular communication is witnessing a rapid growth in market, technology and range of services. Current and future demands for wireless communication services motivate the need for handling multi-media traffic types. In a multimedia communication system, users with different and even time-varying rates and quality of services (QoS) requirements, such as voice, image and data, must be accommodated. The use of Spread Spectrum modulation with Code Division Multiple Access (CDMA) technology is an attractive approach for economical spectrally efficient and high quality cellular and personal communication services. This dissertation explores the technologies of applying different interference cancellation techniques to multi-rate …