Digital Commons Network^™

Wireless Energy Harvesting System, Matthew Palma, Audrey Toop, Andrew Fahey

Electrical Engineering

The modern world is built upon wireless transmission of data. The signals that carry this data travel through the air, an untapped source of power. Unreceived transmissions are dissipated into useless forms of energy when they should be reclaimed. Wireless electronics can theoretically be powered by harvesting energy from the electromagnetic signals in the wireless internet frequency band. The aim of this project is to develop a system to capture ambient energy, convert it into DC power, and store the power for later use. The product will consist of three subsystems: an antenna receiver, a rectifier and voltage-multiplier, and a …

Spice Modeling Of Biosensing Field-Effect Transistor, Alex Castro

Electrical Engineering

This project created a user manual on how to generate an easily configurable and implementable Spice model for Field Effect Transistor (FET) devices created in the Cal Poly clean room. The document contained step by step procedures depicting the proper execution techniques and example results for different experiments required to gather the proper information for these models. This testing methodology was shown for finding the numerous different device parameters of a FET, including the I-V curves, threshold voltage, and subthreshold current values. The manual then described how to transfer this data into a new Spice model to allow for simulation …

Reaction Wheel Based Rocket Active Spin Stabilization, Tanuj Vemuri

Electrical Engineering

Cal Poly Space Systems is the high-powered and experimental rocketry club at Cal Poly SLO. They aim to design, test, and launch fully integrated launch vehicles. In order to create efficient and reliable vehicles, stabilization systems must be implemented. One parameter that can be actively stabilized is the vehicle’s roll. The roll of the vehicle can have noticeably effects on vehicle performance, as uncontrolled roll leads to decreased system stability in flight. Un-controlled roll can also have negative impacts on the quality of onboard video, which is used for post-flight analysis and marketing.

Reaction wheels are a popular method for …

Directional Speaker, Gabriel Tramontina Ceribelli, Vincent Trevor Pierce

Electrical Engineering

Parametric Acoustic Arrays (PAA) are highly directional soundwaves whose attenuation and spread are much less affected by distance from the source as compared to traditional speakers. A well-known application for PAA is the directional speaker. Studies show that noise directly affects health and decreasing noise pollution can help improve the quality of life for millions of people. Directional speakers can revolutionize society by coupling space with sound. This project encodes audio into two RF-Pulse Width Modulated (PWM) waves to drive a transducer array. Each RF-PWM wave interferes with the other in air to generate a Single Sideband (SSB) frequency spectrum …

Bearing Health Detector, Natalie N. Tokhmakhian, Alexander J. Davis

Electrical Engineering

Bearings, a common component in rotating machinery, are essential components of modern rotating machines; thus, monitoring their health is crucial when reducing downtime and boosting production efficiency. The Bearing Health Detector (BHD), a hand-held device, captures and processes the sound of a machine under test in real time and estimates the level of wear and tear by comparing the sound to previous tests. The BHD encompasses audiences involved with roller bearings in rotating machinery and is designed to provide the diagnosis of wear through the universal detection of good, satisfactory, and very poor with the following color scheme: green, yellow, …

A Low Cost Iot-Based Arabic License Plate Recognition Model For Smart Parking Systems, Mohammad Mahmoud Abdellatif, Noura Hany Elshabasy, Ahmed Emam Elashmawy, Mohamed Abdelraheem

Electrical Engineering

License Plate Recognition is one of the significant enablers that can be utilized in wide range of applications in ITS and smart cities. The proposed design relies on three image processing stages to achieve license plate identification with high accuracy which are pre-processing, segmentation, and character recognition. The canny edge detection method with various thresholds, contour detection, and masking techniques are used to locate the car edges and license plate. In the experiment presented in this paper, 200 images were used to identify Egyptian car plates. The model successfully identified Arabic license plates with 93% accuracy. A prototype is implemented …

Practical Podcasting: A Technical Guide To Producing Studio-Quality Podcasts, Jacob Sarmiento

Liberal Arts and Engineering Studies

Podcasting exists at the intersection of the technical aspects of audio engineering and disciplines such as journalism and story-telling. Podcasts at KCPR, the student radio station, cover a wide range of topics including the soundscape of the DIY music scene in San Luis Obispo (SLO) on SLO-Fi, the intricacies of navigating SLO on Cal Poly 101, the best of Cal Poly Athletics on The Gallop, and the voices of underrepresented populations on campus on Different Matters. KCPR utilizes podcasts to entertain and inform its audience of the various experiences possible as a Cal Poly student. As a student-run entity, KCPR …

Paired Storage Distributed Energy System Design For A Local Community Farm, Neil Albert Collison, Lily Goldman

Electrical Engineering

This project considers the design of a renewable energy microgrid for a 19-acre community farm in San Luis Obispo, CA as the farm seeks to increase the magnitude of its electrical loads, and gain back-up electrical capability. The microgrid design will enable lower carbon emissions, reduce demand on the utility grid while saving on energy costs, and provide improved reliability and resiliency to the operator of the community farm. The eventual implementation of the design by a professional engineering entity will allow the community farm to expand its education program to include renewable energy as well as gain notoriety in …

Energy Storage And Communication System, Noah R. Johnson, Marc Wong

Electrical Engineering

The Industrial Power and Controls Lab in Engineering East is welcoming the addition of a new lab course, EE 435. Schneider Electric sponsors this course, which seeks to teach students how to use the Modicon M580 Program Logic Controller (PLC) in various industry use cases. This project is a continuation of previous senior projects and focuses on developing a lab experiment to teach students how to utilize the M580 in an energy storage use case. More specifically, it focuses on the battery management system that oversees the units and exposes students to the various situations this system may encounter during …

Cubicom: Noisy Office Environment Communication Device, Nicholas Alan Maley, Joshua Michael Heeren, Alejandro Peña

Electrical Engineering

The CubiCom is a system that enables secure and clear communication between users in a noisy office space. It can function in any small cubicle within a 12 foot radius. The system consists of a series of wireless headsets for 6 users to transmit and receive audio, and a communication box that facilitates this process. These headsets are noise-dampening, preventing ambient sounds from interrupting conversation and making sure that all parties can hear each other clearly. Line-of-sight (L.O.S.) with each headset is required to have proper communication between users. This feature ensures no one outside of the room can eavesdrop, …

Power Thyristor Controller For Speed Control Of Dc Motor, Alejandra Zapata, Morgan Erich Boehme, Abdullah Mohammed Awidah, Payton Robert Chalstrom

Electrical Engineering

In this work, a Power Thyristor Controller for Speed Control of DC Motor has been developed with the purpose of replacing an existing simulation experiment, aiming to effectively implement the principle of learning by doing. The primary objective of the experiment setup is to illustrate the fundamental principles and operational mechanisms underlying the firing angle and controlled bridge rectifier. The new experiment is taking advantage of the existing FCRO4100 Single Phase Firing Board that was donated to the University by ENERPRO. The pre-programmed microcontroller is connected to the thyristor bridge rectifier that’s powered by 24VAC. Additionally, a DC motor will …

Analog Circuits For Computing, Nicole Christine Pickett, Lauren Cathy Sueko Chun, Dillon Ryan Nguyen

Electrical Engineering

This project entails designing, simulating, and verifying analog circuits that can perform essential computing functions for power systems applications. The project aims to remedy critical challenges associated with handling calculations digitally, namely, time and power. This project's scope includes creating a library of circuits in SPICE that can be used to model and simulate complex mathematical equations. From these SPICE models, the circuit can be constructed physically, where the solution can be generated in less time using less power than doing the computation digitally. The performance and efficiency of analog computing will be measured and compared to conventional digital methods.

Low-Cost Portable Laser Communication Device, Tom Elkayam, Basile Louis Scoffie

Electrical Engineering

The portable laser communication device (PLCD), is a low cost system used to set up networks in data isolated regions via an optical line-of-sight communications protocol. In this manner the PLCD transmits at 9600 baud using UART protocol over the visible light band at 635nm. The device is intended to operate in indoor conditions and be semi-permanent until redeployed. The PLCD is built as a transmitter, receiver pair and when installed, utilizes tracking to find each other and automatically set up communication within a window of 30° laterally and 10° vertically. Each side of the system is less than 15 …

Variable Frequency Motor Drive Application, Jason G. Milne, Nick Mark

Electrical Engineering

This project entails the development of an electrical engineering undergraduate lab module focusing on utilizing a variable frequency drive (VFD) controlled with a programmable logic controller (PLC) — the Modicon M580. The variable frequency drive is a device that is able to automatically change the frequency of an object through automation without having to physically change the device that is being controlled (ex: fans, pumps, motors, etc.). This project will guide students to understand the software for programming and controlling the PLC within a 3 hour laboratory experiment. Throughout the lab, the students will learn how to implement the PLC …

Automotive Collision Warning System Retrofit, Ethan Clark Najmy

Electrical Engineering

In the early 2000s, few automakers began implementing forward collision warning systems in their cars. As technology advanced this system became available on more and more luxury cars. In recent years, this technology has spread to more affordable vehicles driven every day. However, as this technology has only recently advanced to less expensive, more economical cars, older vehicles of the same model may not have this advanced and important safety feature. This project investigates and creates a preliminary design for an affordable, easy-to-install, forward collision warning system that can be retrofitted to vehicles without the system currently installed. Using a …

Emulating The Doppler-Shift For Lora Based Low Earth Orbit Satellite Communication, Ariel Freiman, John Stephen Gharib

Electrical Engineering

This project investigates the adverse effects of the Doppler Shift on a LoRa waveform transmitted from a Low Earth Orbit Satellite or LEOSAT. This work is on behalf of Project OWL, who will use these results to justify further investment into developing a LEOSAT for their communication network. Part of the project is to design a test setup to replicate the Doppler Shift in the lab. The Doppler shift replication setup distorts the transmitted waveform, similar to how the signal gets distorted if sent from a LEOSAT. The test setup will comprise both software and hardware control, wherein software, the …

Instrumented Control Column For Optionally Piloted Aircraft, Andrew J. Klein

Electrical Engineering

Natilus, an aerospace company that is rapid-prototyping optionally piloted aircraft (OPA) for the shipping industry, needs a system that retrieves control column position data in order to manipulate flight simulator parameters in software. At present, a universally compatible system for all aircraft does not exist. Typically, established aerospace companies will sink significant time and money into developing proprietary systems for control column data retrieval as every aircraft is unique in its layout and linkage design. However, as a startup developing their first aircraft, Natilus does not have the privilege of modifying an existing sensor system to work with their HIL …

Cardio Trainer, Levi Rash, Cristian Rodriguez

Electrical Engineering

The Cardio Trainer Device is a wearable device that guides the user through a physical exercise based on the user’s heartbeat measurements. Users interface with the device via a wearable band. The band determines the heartbeat of the user in real time and, using that reading, gives the user verbal instructions to optimize their workout. These verbal instructions then serve to control the physical exertion of the user and are delivered through an audio device. Users input personal physical metrics to the Cardio Trainer Device that tailor the performance of the device in a manner of ways: rate of instruction, …

High Performance Radar System, Danny Maas

Electrical Engineering

This report covers the design, fabrication, and test of an X-band FMCW radar inspired by the radars from Cal Poly course EE 541, “Advanced Microwave Laboratory.” In this class, 2.4GHz Doppler and FMCW radars are designed and built using consumer off-the-shelf (COTS) components. Operability is the focus of this class, sacrificing performance, accuracy, and precision. this project aims to improve upon those radars by using custom-designed components instead of COTS components and shifting the operating frequency to 10GHz.. The use of custom components can improve output power and frequency stability, and higher frequency reduces component size. The FCC allows amateur …

Wideband Parameter Estimation Of Overhead Transmission Lines From Terminal Measurements, Fahad J. Alqahtani

Dissertations

The accurate and efficient determination of electrical parameters of transmission lines is essential when performing computer-aided analyses of power systems, including power-flow, state estimation, short-circuit, transient stability, power quality, and electromagnetic transients.

In this dissertation, a novel technique for wideband parameter estimation of frequency-dependent single-phase, three-phase transposed, and three-phase untransposed overhead lines, is proposed. The proposed technique utilizes terminal measurements of transient voltages and currents and is based on an analytical approach to solve the frequency domain 2-port nodal model of the line for the series impedance and shunt conductance per unit length as a function of the frequency. The …

An Examination Of The Stiffness Terms Needed To Model The Dynamics Of An Eddy Current Based Maglev Vehicle, Colton W. Bruce, Jonathan Bird

Electrical and Computer Engineering Faculty Publications and Presentations

This paper re-examines the basis for each eddy current stiffness term computed from prior published steady-state eddy current models. The paper corrects prior analysis work by confirming, through the use of 2-D and 3-D dynamic finite element analysis modelling, that when a magnetic source is moving over an infinite-wide and infinite-long conductive sheet guideway the steady-state lateral and translational stiffness terms will be zero and only the vertical coupled stiffness terms need to be modelled. Using these observations, a much simplified 6 degrees-of-freedom (DoF) linearized eddy current dynamic force model can be used to compute the steady-state force changes in …

The Design And Construction Of A Radio Telescope, Avery Elizabeth Bunting, Kira Hope Tolman

Architectural Engineering

Two architectural engineering students and an electrical engineering student worked together to design and build a radio telescope that is capable of using hydrogen line astronomy to map the galaxy. The telescope is made entirely out of aluminum, which, combined with small deflection limits, made for an iterative design process that focused primarily on constructability and supporting the desired outcomes of the electrical side.

Design, Modeling, And Testing Of A Novel Inductor For Electric Vehicles: Iron Nitride Soft Magnetic Composites, Sydney F. Fultz-Waters, Jacob Krynock

Materials Engineering

New technology for electric vehicles (EVs) must meet the requirements of higher energy usage, lower costs, and more sustainable source materials. One promising material for EV power system components is iron nitride (IN) soft magnetic composites (SMCs) because of their competitive magnetic properties and high abundance of the source materials. As part of an ongoing program at Sandia National Laboratories, this project focused on using computer modeling to optimize the prototyping process for an iron nitride SMC toroidal inductor to reach a target inductance of 600 μH. Four inductors with different combinations of wiring (26 AWG and 20 AWG) and …

Range-Doppler Map Processing Chain For Marine Radar On Fpga Of An Rfsoc, Nickolas W. Ogilvie

Master's Theses

To improve the accuracy and resolution of the measurements, radar systems employ increasingly complex, resource-intensive signal processing, larger bandwidths, and higher carrier frequencies. However, implementing these improvements requires more expensive, complex electronics that are larger and use more power. Using RFSoC (Radio Frequency System on Chips) in radars can address these challenges. By combining processors, an FPGA (Field Programmable Gate Array), and RF data converters into a single integrated circuit, RFSoCs allow for radar electronics that are physically smaller, use less power, and are simpler to design. As using RFSoCs to perform RF data conversion for radars has been already …

Enhancing Telecom Churn Prediction: Adaboost With Oversampling And Recursive Feature Elimination Approach, Long Dinh Tran

Master's Theses

Churn prediction is a critical task for businesses to retain their valuable customers. This paper presents a comprehensive study of churn prediction in the telecom sector using 15 approaches, including popular algorithms such as Logistic Regression, Support Vector Machine, Decision Tree, Random Forest, and AdaBoost.

The study is segmented into three sets of experiments, each focusing on a different approach to building the churn prediction model. The model is constructed using the original training set in the first set of experiments. The second set involves oversampling the training set to address the issue of imbalanced data. Lastly, the third set …

Programmable Vibration Table Retrofit With Eagle Medical, Jonathan Ilagan, Madhav Asok, Max Lewter

Biomedical Engineering

This project aimed to repair and upgrade a vibration table used for package testing for the sponsor, Eagle Medical - a medical packaging and sterilization company based in Paso Robles, California. The current vibration table is not programmable and lacks circuit diagrams, making it difficult to repair. In addition, it is not functional due to internal circuitry issues and power requirements. To address these issues, the team will implement several upgrades to improve the product and allow for better random cyclic vibration testing. A full assessment of the existing vibration table will be conducted to ensure the viability of these …

Emitter Selection Optimization For Passive Synthetic Aperture Radar, Mu Kim

Theses and Dissertations

Widely distributed modern communication networks provide excellent opportunities to share the spectrum for passive radar systems, of which emitter selection is a major consideration factor. This research introduces emitter selection problem space, which consists of three SAR processing domains, namely, Data Collection, Image and Mission Performance Domains. Quantitative links between these domains are critical to formulate an optimal emitter selection problem in the Data Collection Domain and/or Image Domain, which satisfies given mission requirements in Mission Performance Domain. This research examines the properties of the SAR processing domains to develop performance metrics in the Data Collection and Image Domains, whose …

Novel Approach For Non-Invasive Prediction Of Body Shape And Habitus, Emma Young

Electronic Theses and Dissertations

While marker-based motion capture remains the gold standard in measuring human movement, accuracy is influenced by soft-tissue artifacts, particularly for subjects with high body mass index (BMI) where markers are not placed close to the underlying bone. Obesity influences joint loads and motion patterns, and BMI may not be sufficient to capture the distribution of a subject’s weight or to differentiate differences between subjects. Subjects in need of a joint replacement are more likely to have mobility issues or pain, which prevents exercise. Obesity also increases the likelihood of needing a total joint replacement. Accurate movement data for subjects with …

Time-Domain Shielding Effectiveness Analysis Based On Dgtd Method Accelerated By Local Time-Stepping And Parallel Techniques, Zheng Lang Jia, Huan Huan Zhang, Da Zhi Ding, Lei Zhao, Qiang Ren, Li (Lijun) Jun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

The discontinuous Galerkin time-domain (DGTD) method accelerated by local time-stepping (LTS) and parallel techniques is employed to analyze the time-domain shielding effectiveness (TDSE) of metallic enclosures. The detailed formulations and implementation procedures of the DGTD method and LTS and parallel techniques are introduced. Numerical results validate the correctness of the proposed method. Moreover, the influence of various design parameters of the metallic enclosure, including aperture dimensions, wall thickness, spacing of aperture arrays, etc., on the TDSE are analyzed by the proposed method. Some rules are given for the design of the enclosure with rectangular apertures from the perspective of TDSE. …

Motion-Resistant Pulse Oximetry, Ludvik Alkhoury

Dissertations

The measurement of vital signs ? such as peripheral capillary oxygen saturation (SpO₂) and heart rate (HR) levels ? by a pulse oximeter is studied. The pulse oximeter is a non-invasive device that measures photoplethysmography (PPG) signals and extracts vital signs from them. However, the quality of the PPG signal measured by oximetry sensors is known to deteriorate in the presence of substantial human and sensor movements contributing to the measurement noise. Methods to suppress such noise from PPG signals measured by an oximeter and to calculate the associated vital signs with high accuracy even when the wearer …