Digital Commons Network^™

Sel4 On Risc-V - Developing High Assurance Platforms With Modular Open-Source Architectures, Michael A. Doran Jr

Masters Theses

Virtualization is now becoming an industry standard for modern embedded systems. Modern embedded systems can now support multiple applications on a single hardware platform while meeting power and cost requirements. Virtualization on an embedded system is achieved through the design of the hardware-software interface. Instruction set architecture, ISA, defines the hardware-software interface for an embedded system. At the hardware level the ISA, provides extensions to support virtualization.

In addition to an ISA that supports hypervisor extensions it is equally important to provide a hypervisor completely capable of exploiting the benefits of virtualization for securing modern embedded systems. Currently there does …

Consensus-Based Active And Reactive Power Control And Management Of Microgrids, Shruti Singh

Electronic Theses and Dissertations

Microgrids incorporating distributed generation and renewable energy sources offer potential solutions to the energy crisis while modernizing traditional grids. Despite cost-effectiveness in some technologies, financial support remains crucial for expensive ones like PV, fuel cells, and storage technologies. Microgrids bring economic benefits, efficiency, reduced emissions, and improved power quality. Their success hinges on cost reductions in renewables, storage, reliability, and energy management systems, enabling operation both with and without the utility grid.

Economic Dispatch optimizes system costs, considering all constraints. Various methods tackle this problem, including quadratic convex functions, Lagrangian relaxation, and quadratic programming. For microgrids with distributed generators, seamless …

Optimal Sizing And Safe Management Of Lithium-Ion Batteries In High Voltage Power Systems, Hayden Lee Atchison

Electrical Engineering Dissertations - Archive

Lithium-ion batteries have gained widespread use in various applications, but safety challenges persist due to errors in assembly and faulty electronics management. Ensuring safety and reliable operation in large batteries containing numerous series/parallel cells demand innovative monitoring technologies. Elevated temperatures resulting from normal or abnormal operation are a major cause of battery failure, necessitating effective temperature monitoring techniques. Similarly, abnormal stress/strain signatures offer valuable diagnostic information. In the study discussed here, the application of a Optical Distributed Sensor Interrogator (ODiSI) employing high-definition fiber optic sensors (HD-FOS) for measuring surface temperature and case deformation of 18650 cells under normal and abnormal …

Developing Firmware For Space Weather Probes 2 Using Hdl Coder, Nicholas L. Wallace

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

GPS and wireless communications are affected by interference from the ionosphere. Space weather affects plasma in the ionosphere, causing communication disruptions and reliability issues. To better understand how space weather affects the ionosphere, instruments are flown in space to collect data about the electrical characteristics of plasma in the ionosphere. Space systems require a lot of time and effort to develop and test. This thesis explores how a high level tool can be used to simplify the process and some obstacles that still exist with developing some space systems. To do this, the firmware architecture of a new version of …

Development Of The Digital Signal Processing For The Space Weather Probes Version 2 Sensor Using The Matlab/Simulink Environment, Benjamin J. Lewis

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Space Weather Probes (SWP) is an instrument that provides measurements of the plasma environment of the ionosphere. SWP was flown on the Scintillation Prediction Observation Task (SPORT) mission, a joint mission between the United States of America and Brazil. This thesis will develop the digital signal processing (DSP) hardware design for the Space Weather Probes version 2 (SWP2). The data from these instruments will be used to determine the density and temperature of the local plasma, as well as the electric field in the local plasma. This thesis presents the design and testing of the DSP designs for all of …

A Cohesive Simulation And Testing Platform For Civil Autonomous Aerial Sensing And Operations, Stockton G. Slack

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Drones (also known as sUAS or small Uncrewed Aerial Systems) are often flown with cameras to take images of an area of land. These images can then be used to create a map by stitching these images together. This map can then be analyzed using scientific principles to learn things about the land and make decisions or take action based on the information.

The scientific application of drones is very advantageous, but flying a drone is inherently dangerous, impacting the safety of the airspace (particularly in the event of a crash), and drones are more dangerous the bigger they are. …

Reclaiming Fault Resilience And Energy Efficiency With Enhanced Performance In Low Power Architectures, Noel Daniel Gundi

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Rapid developments of the AI domain has revolutionized the computing industry by the introduction of state-of-art AI architectures. This growth is also accompanied by a massive increase in the power consumption. Near-Theshold Computing (NTC) has emerged as a viable solution by offering significant savings in power consumption paving the way for an energy efficient design paradigm. However, these benefits are accompanied by a deterioration in performance due to the severe process variation and slower transistor switching at Near-Threshold operation. These problems severely restrict the usage of Near-Threshold operation in commercial applications. In this work, a novel AI architecture, Tensor Processing …

Investigation Of Vo2 Thin Films And Devices For Opto-Electromechanical Applications, Samee Azad

All Dissertations

Specialized and optimized low pressure direct oxidation technique have been implemented to synthesize high quality VO₂ thin films on various substrates (sapphire, SiO₂/Si, AT-cut quartz, GaN/AlGaN/GaN/Si and muscovite). Structural and surface characterization methods such as X-ray diffraction, Raman spectroscopy and atomic force microscopy have been administered on the grown VO₂ films which indicate their material quality. Transition of characteristics of the VO₂ films are caused by semiconductor metal transition (SMT). This phenomenon is attributed as the change maker in transition of resistivity and transmitted optical power through the VO₂ films. Apart the substrates mentioned, …

Cross-Layer Cryptography For Wireless Communication, Hesham Mohammed

Legacy Theses & Dissertations (2009 - 2024)

Spectrum access in the next-generation wireless networks will be congested, competitive, and vulnerable to malicious intents of strong adversaries. This motivates us to rethink secure wireless communication in a zero-trust electromagnetic environment. Classical cryptography is an add-on feature that provides semantic security between trusted partners at higherlayers. However, cryptography ignores cross-layer interaction with physical layer which is required to enhance the secrecy level of the transmitted waveform. Moreover, cryptographic schemes might no longer be secure in the quantum era. Physical layer security (PLS) is introduced as a complement to cryptography, where security is provided in the physical layer using the …

The Application Of Model Predictive Control On Paralleled Converters For Zero Sequence Current Suppression And Active Thermal Management, Justin Dobey

All Theses

In the field of power electronics, the control of rectifiers is a crucial area of study. Rectifiers are used to convert AC power into DC power, and are commonly used in a wide range of applications, including renewable energy systems, industrial automation, and consumer electronics. However, in medium and high-power systems when multiple rectifiers are connected in parallel to a DC bus, stability issues can arise, including voltage fluctuations, zero sequence circulating current, and thermal imbalance.

Achieving stable DC bus voltage is essential for maintaining the proper functioning of electronic devices, while suppressing zero sequence current is necessary for protecting …

Virtual Prototyping Of Pebb Based Power Electronics System For Ground Vehicles, Yi Li

All Theses

Power electronics are heavily involved in power and energy systems in plenty of applications nowadays. The increase of demand brings more challenges into simulations for development. Considering the complexity of the systems and high frequency operational conditions, this paper presents comprehensive research on modeling, simulating, and validation on ground vehicle propulsion system applications.

To reduce the computational burden, the Power Electronics Building Blocks concept is utilized to simplify the structure of modeling under different conversion scenarios in ground vehicle systems. In addition, the Average and Switching versions models are included. To speedup the simulation, the engagement of advanced computing technique …

Generalizable Deep-Learning-Based Wireless Indoor Localization, Ali Owfi

All Theses

The growing interest in indoor localization has been driven by its wide range of applications in areas such as smart homes, industrial automation, and healthcare. With the increasing reliance on wireless devices for location-based services, accurate estimation of device positions within indoor environments has become crucial. Deep learning approaches have shown promise in leveraging wireless parameters like Channel State Information (CSI) and Received Signal Strength Indicator (RSSI) to achieve precise localization. However, despite their success in achieving high accuracy, these deep learning models suffer from limited generalizability, making them unsuitable for deployment in new or dynamic environments without retraining. To …

Characteristics Of Refractivity And Sea State In The Marine Atmospheric Surface Layer And Their Influence On X-Band Propagation, Douglas Matthew Pastore

Electronic Theses and Dissertations

Predictions of environmental conditions within the marine atmospheric surface layer (MASL) are important to X-band radar system performance. Anomalous propagation occurs in conditions of non-standard atmospheric refractivity, driven by the virtually permanent presence of evaporation ducts (ED) in marine environments. Evaporation ducts are commonly characterized by the evaporation duct height (EDH), evaporation duct strength, and the gradients below the EDH, known as the evaporation duct curvature. Refractivity, and subsequent features, are estimated in the MASL primarily using four methods: in-situ measurements, numerical weather and surface layer modeling, boundary layer theory, and inversion methods.

The existing refractivity estimation techniques often assume …

Faults Segmentation In Levee Systems Using Deep Learning Approaches, Manisha Panta

LSU New Orleans Theses and Dissertations

Levees are earthen structures constructed to mitigate flooding in low-lying areas. Although levee systems can reduce flood risks, they cannot completely eliminate them. Failures within flood control systems due to inadequate maintenance or strong water currents can lead to significant property damage and catastrophic loss of life, as was seen during Hurricane Katrina. Consequently, regular inspections are essential to identify and address any issues with the levees promptly. However, current inspection methods rely on manual techniques that are time-consuming, labor-intensive, and prone to human error. Therefore, this study proposes using deep learning models for more efficient and frequent assessment of …

Distributed Cooperative Control Of Multiple Uavs With Uncertainty, Shihab Ahmed, Wenjie Dong

Electrical and Computer Engineering Faculty Publications

This paper considers the formation flying of multiple quadrotors with a desired orientation and a leader. In the formation flying control, it is assumed that the desired formation is time-varying and there are the system uncertainty and the information uncertainty. In order to deal with different uncertainties, a backstepping-based approach is proposed for the controller design. In the proposed approach, different types of uncertainties are considered in different steps. By integrating adaptive/robust control results and Laplacian algebraic theory, distributed robust adaptive control laws are proposed such that the formation errors exponentially converge to zero and the attitude of each quadrotor …

Enhanced Hardware Trojan Detection In Chips By Reducing Linearity Between Features, Alfred M. S. Moussa

Boise State University Theses and Dissertations

Globally, there has been an increase in demand for System on Chip (SoC) applications, active medical implants, and Internet of Things (IoT) devices. However, due to challenges in the global supply chain, the design, fabrication, and testing of Integrated Circuits are often outsourced to untrusted third-party entities around the world rather than a single trusted entity. This situation presents an opportunity for adversaries to compromise the device’s integrity, performance, and functionality by inserting malicious modifications known as Hardware Trojans (HTs) into the original design. HTs can also create a backdoor in the system for malicious alterations.

The problem of hardware …

Auto-Segmentation In Pancreatic And Liver Radiation Therapy, Cenji Yu

Dissertations and Theses (Open Access)

Background

Gastrointestinal cancers exhibit a high mortality rate compared to other cancer types. Among these, pancreatic cancer ranks as the fourth leading cause of cancer-related deaths worldwide. The five-year survival rate remains alarmingly low at a mere 9%. Hepatocellular carcinoma (HCC), another aggressive form of cancer, is rapidly becoming the primary cause of cancer-related deaths in the United States. The treatment of both liver cancer and pancreatic cancer heavily relies on a multidisciplinary approach. Innovative treatment strategies involving dose-escalated regimens, such as stereotactic body radiation therapy (SBRT), are emerging as an important pillar of the management of liver and pancreatic …

Integration Of Biomedical Engineering And Computer Vision For Morphological Alteration Identification In Diabetic Cardiomyopathy: An Analysis And Evaluation Stra Tegy, Monica Delgado

Open Access Theses & Dissertations

Diabetic cardiomyopathy (DCM) is a type of heart disease that affects people with diabetes. It is characterized by changes in the structure and function of the heart, including thickening and stiffening of the heart muscle, impaired relaxation of the heart, and reduced pumping function. DCM is considered an ailment of the heart muscle and an increased risk factor in people with type 2 diabetes mellitus (T2DM). Although the exact mechanisms behind DCM are not fully understood, high blood glucose levels are known to contribute to the development and progression of the disease.While many options to manage and diagnose DCM have …

Super-Resolution Textured Digital Surface Map (Dsm) Formation By Selecting The Texture From Multiple Perspective Texel Images Taken By A Low-Cost Small Unmanned Aerial Vehicle (Uav), Bikalpa Khatiwada

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Textured Digital Surface Model (TDSM) is a three-dimensional terrain map with texture overlaid on it. Utah State University has developed a texel camera which can capture a 3D image called a texel image. A TDSM can be constructed by combining these multiple texel images, which is much cheaper than the traditional method. The overall goal is to create a TDSM for a larger area that is cheaper and equally accurate as the TDSM created using a high-cost system.

The images obtained from such an inexpensive camera have a lot of errors. To create scientifically accurate TDSM, the error presented in …

Understanding Peripheral Blood Pressure Signals: A Statistical Learning Approach, Md Abul Hayat

Graduate Theses and Dissertations

Proper estimation of body fluid status for human or animal subjects has always been a challenging problem. Accurate and timely estimate of body fluid can prevent life threatening conditions under trauma and severe dehydration. The main objective of this research is the estimation, classification and detection of dehydration in human and animal subjects using peripheral blood pressure (PBP) signals. Peripheral venous pressure (PVP) and peripheral arterial pressure (PAP) signals have been investigated in this research. Both PVP and PAP signals are PBP signals. A dataset of PVP signals was collected using standard peripheral intravenous catheters from human subjects suffering from …

Design Of Microwave Superconducting Resonators For Materials Characterization, Xinyi Zhao

McKelvey School of Engineering Graduate Student Theses & Dissertations

A resonator is a specialized device capable of storing and transferring energy at precise frequencies. Resonators find widespread use in various fields, such as electrical engineering, physics, and material science, owing to their exceptional ability to accurately measure, filter, and amplify signals. Different types of resonators exist, but coplanar waveguide (CPW) and coupled coplanar waveguide (CCPW) resonators are popular due to their high-frequency operation and easy integration into microfabrication processes.

An Avalanche Transistor-Based Pulse Generator Design For Infrared Laser Applications, Abraham Lopez

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis details the design and results of a circuit intended for infrared laser applications, specifically for transcranial infrared light simulation (TILS) experiments and for use as a range finder. The circuit itself is comprised of a transistor, high voltage power supply, laser diode, capacitor, resistor, diode, and low voltage pulse. The design of a range finder is also developed. The range finder design is the same as the circuit developed for TILs with the addition of a few more components for receiving the returned light pulse such as a photodiode, op-amp, and comparator. The techniques used for a successful …

Towards A Robust Defense: A Multifaceted Approach To The Detection And Mitigation Of Neural Backdoor Attacks Through Feature Space Exploration And Analysis, Liuwan Zhu

Electrical & Computer Engineering Theses & Dissertations

From voice assistants to self-driving vehicles, machine learning(ML), especially deep learning, revolutionizes the way we work and live, through the wide adoption in a broad range of applications. Unfortunately, this widespread use makes deep learning-based systems a desirable target for cyberattacks, such as generating adversarial examples to fool a deep learning system to make wrong decisions. In particular, many recent studies have revealed that attackers can corrupt the training of a deep learning model, e.g., through data poisoning, or distribute a deep learning model they created with “backdoors” planted, e.g., distributed as part of a software library, so that the …

Nrc-Sim: A Node-Red Based Multi-Level, Many-Core Cache Simulator, Ezequiel Treviño

Theses and Dissertations

As computational systems become ever-more integral to daily life, so too does the importance of understanding how these complex systems work. For those unfamiliar with the underlying concepts, this can be a daunting task. In an effort to address such concerns, this paper presents a Node-RED based cache simulator that enables users to observe the effects of their desired cache configuration, with users having the ability to easily modify various parameters, such as the core count, the number of levels within the cache, and coherence protocols, among other parameters. Through the use of Node-RED, NRC-SIM allows for simplicity of use …

Comparison Of Random Coupling Model To Stochastic Dyadic Green’S Function When Coupling To A Distributed Port, Evelyn Anne Dohme

Electrical and Computer Engineering ETDs

The Random Coupling Model (RCM) provides statistical representation of coupling between ports in a highly overmoded resonant cavity based on knowledge of radiation impedances of system ports and cavity properties. A recent variant of RCM, the Stochastic Dyadic Green’s Functions (S-DGF), provides the statistical distribution of fields in the cavity. By using Source Reconstruction Methods (SRM) to approximate equivalent surface currents, I hypothesized that the S-DGF can calculate the fields at their location, enabling a statistical estimate of the coupled power. Using nearfield radiation from simple patch antenna simulations and the SRM to estimate the equivalent fields and account for …

A Direct Data Approach To Joint 2-D Doa And Frequency Estimation With L-Shaped Array, Yanming Zhang, Lijun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

This article presents a joint two-dimensional dynamic mode decomposition (JTDDMD) approach to estimate the azimuth angle, elevation angle, and frequency for multiple narrowband sources using the L-shaped array. According to the placement position of different coordinate axes of the receiving antenna in the array, i.e., x- or z-axis, the received signal is divided into two datasets. Two-dimensional dynamic mode decomposition (TDDMD), the sub algorithm of JTDDMD, is used twice to deal with these two datasets separately. Through the analysis of the x-axis subarray received signal using TDDMD, the electrical angle in the x-direction and frequency are obtained with automatic pairing. …

Modeling & Small Signal Analysis Of Grid Forming Inverter, Kadesh Hepburn

Graduate Theses and Dissertations

There is a rising number of inverter-based resources (IBRs) being integrated with distribution systems are becoming a more common occurrence. With integration of IBRs inverters, power utilities are experiencing an increase of number of operations with regards to voltage and frequency support. To maintain grid stability and reliability, IBRs need to provide some of the services currently (or formerly) provided by synchronous generators. Interconnection standards, like the IEEE 1547. 2018 has include requirements for IBRs to have the capability to provide some of these services—such as frequency and voltage support—and the procurement and deployment of the services can be implemented …

Fabrication And Measurement Of Lt-Gaas Photoconductive Antennas And Arrays, Zachary Paul Uttley

Graduate Theses and Dissertations

This thesis presents the fabrication and measurement of LT-GaAs based terahertz (THz) photo conductive antennas (PCAs) and arrays. The LT-GaAs THz PCAs are fabricated to serve as reference devices to new 2D material black phosphorous (BP) based THz PCAs. The LT-GaAs and BP devices have identical metallic electrodes, allowing for a comparison of emitted THz intensity and bandwidth. All PCAs have been measured using an open bench pulsed time-domain spectroscopy (TDS) system with a usable bandwidth from 0.1-4 THz, pumped with a 780nm Ti:Sapphire femtosecond laser. The results have shown LT-GaAs devices outperforming BP devices in signal amplitude and bandwidth …

Partial Discharge Mitigation In Power Modules Using An Automation-Driven Design Rule Development Method, Shilpi Mukherjee

Graduate Theses and Dissertations

Power modules used for the conversion and conditioning of electrical power for applications like electric vehicles, more-electric aircraft, the power grid, etc., are largely designed manually by engineers. Design automation of power modules is starting to gain recognition as a timely and necessary alternative to intuitive manual design and fabrication. With increasing need for wide bandgap materials that can operate at higher voltages, and the need to make modules more compact, hazards like electrical breakdown are more likely. Partial discharge (PD) is a silent and invisible precursor to electrical breakdown. It is compounded with compaction, creating a potential for electrical …

A Real-Time Anpc Inverter Digital Twin With Integrated Design-For-Trust, Paulo Vitor Do Amaral Custodio

Graduate Theses and Dissertations

The demand for renewable energy has increased over the last few years, and so has the demand for greater expectations within the energy market. This increasing trend has been accompanied by more significant usage of internet-connected devices (IoT), leading to critical electrical infrastructure being connected to the internet. Implementing internet connectivity with such devices and systems provides benefits such as improving the system's performance, facilitating irregularity and anomaly mitigation, and providing additional situational awareness for enhanced decision-making. However, enhancing the connected system with IoT introduces a drawback – a greater vulnerability to cyber-attacks. Cyber-attacks targeting critical infrastructure in the electrical …