Digital Commons Network^™

A Formal Description Of The Nova-800 Computer In Computer Design Language, Ronald Lee Engelbrecht

Masters Theses

"This paper presents a formal description of the operation of the NOVA 800 in Computer Design Language (CDL). For simplicity, the description does not include specific input/output devices, the multiply/divide option, or data channel operations. The description is intended to be used as a supplement in a basic course in computer organization, and an example of its use is included"--Abstract, page ii.

Nutation Control During Precession Of A Spin-Stabilized Spacecraft, Richard James Donner

Masters Theses

"The effects of precession thrust pulses and energy dissipation upon nutation of a spin-stabilized spacecraft are studied. Methods for controlling nutation during a precession maneuver are proposed and examined. In particular, a precession modulation control law is developed which uses precession thrust pulses to control nutation. Digital simulations show that precession control with separate nutation control is the fastest precessing system; however, the precession modulation method is only fractionally slower while not requiring a separate nutation control system"--Abstract, page ii.

Decision-Directed Detector For Overlapping Pcm/Nrz Signals, Cheng Wang, Thomas L. Noack

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A decision-directed (DD) technique for the detection of overlapping PCM/NRZ signals in the presence of white Gaussian noise is investigated. The performance of the DD detector is represented by probability of error PE versus input signal-to-noise ratio (SNR). To examine how much improvement in performance can be achieved with this technique, PE's with and without DD feedback are evaluated in parallel. Further, analytical results are compared with those found by Monte Carlo simulations. The results are shown in good agreement. © 1973, IEEE. All rights reserved.

Tilt-Table Alignment For Inertial-Platform Maintenance Without A Surveyed Site, Gordon E. Carlson, Max E. Bott

Electrical and Computer Engineering Faculty Research & Creative Works

A method for aligning the rotary tilt table for an inertial-platform maintenance facility without surveying the site is analyzed and evaluated. The method utilizes multiple measurements of the tilt-table azimuth alignment error with different inertial platforms to determine a best estimate of the alignment error. Error analysis indicates that useful facility performance can be obtained with only a small number of measurements. The tilt-table alignment accuracy can be improved as more measurements of the alignment error are made during normal facility operation. © 1973, IEEE. All rights reserved.

Implementation Of Recursive Algorithms For Delay-Time Estimation Using The Fast Walsh Transform, Donald Robert Nelson

Doctoral Dissertations

"Use of the fast Walsh transform to resolve noisy signals into Walsh function series to digitally implement maximum-likelihood parameter estimators for real-time use is investigated. Realization of estimators which seek a null in the derivative of the log-likelihood function, instead of direct maximization, results in feedback algorithms which yield considerable savings in computation time and storage. Performance of these feedback delay-estimation algorithms is characterized in terms of mean-squared error (MSE) and response to a delay step by Monte Carlo simulation. The effect of changing the number of points in the transform on the MSE is also investigated. Hard limiting of …

Parameter Identification Applied To Linear Quadratic Differential Games, John D. Corrigan

Doctoral Dissertations

"A two player zero-sum linear quadratic differential game is investigated for the case in which one of the players has incomplete a priori knowledge of the parameters of his opponent's dynamic system. This incomplete system parameter information game is shown to be playable since the ignorant player can make limiting estimates of the unknown parameters from the relative controllability condition for the game. Performance from the ignorant player's point of view is suboptimal.

It is also shown that parameter identification techniques can be applied by the ignorant player in order to directly identify the smart player's closed-loop parameters in the …

Flowware -- A Flow Charting Method To Describe Digital Systems, Wayne Everett Omohundro

Doctoral Dissertations

"FLOWWARE is an interactive, graphical language to aid in the understanding and design of digital networks. The language is based upon the concept of flow charting. The user specifies the register layout of the system and the sequential operation in the form of a diagram on a graphics terminal. FLOWWARE makes full use of a local minicomputer to perform editing and drawing functions, and a remote large computer to perform translation and simulation. This division of labor allows the user to build his description off-line without having the remote computer program active"--Abstract, page ii.

Photo And Magnetic Gated Bi-Directional Counter, Charles Burdette Kraemer

Graduate Research Papers

The purpose of this study is to investigate digital counter circuitry, digital logic, and some special applications of digital display systems. The technical data and information ascertained from the research will be used to design and develop a four-digital counter with photo and magnetic gated inputs.

Electrical Wiring For Lower-Cost Housing, Burns E. Hegler

International Symposia on Low Cost Housing Problems

No abstract provided.

Application Of Numerical Analysis To Root Locus Design Of Feedback Control Systems, Steve William Justice

Dissertations and Theses

Many practical problems in the field of engineering become so complex that they may be effectively solved only with the aid of a computer. An effective solution depends on the use of an efficient algorithm. Plotting root locus diagrams is such a problem. This thesis presents such an algorithm.

Root locus design of feedback control systems is a very powerful tool. Stability of systems under the influence of variables can be easily determined from the root locus diagram. For even moderately complex systems of the type found in practical applications, determination of the locus is extremely difficult if accuracy is …

Gain And Dispersion Focusing In A High Gain Laser, Lee W. Casperson, Amon Yariv

Electrical and Computer Engineering Faculty Publications and Presentations

The transverse modes of a laser resonator containing a medium with a strong radial gain profile differ greatly from the modes of a similar resonator containing a low gain medium. Focusing and defocusing effects result from the gain profile and from the associated dispersion profile. The dispersion focusing causes an asymmetry in the power output as the laser is tuned across the gain line. The theory has been verified using a high gain 3.51-µ xenon laser.

An Experimental Study Of Power Systems, Nguyen Quang Duoc

Masters Theses

"For three phase AC power systems consisting of synchronous machines interconnected by transmission lines and other electrical transmission equipment, the power transmitted and the stability of the system depend upon the constants of synchronous machine and the characteristics of the transmission lines. The purpose of this work is to design and set up a model of a power system in the laboratory, measure the constants of synchronous machines, the power angles and power flows of the system. An investigation of the effects of the saturated machines is based upon the laboratory data.

This work is intended primarily as a tool …

Minimum Distance Classification In Remote Sensing, A. G. Wacker, D. A. Landgrebe

LARS Technical Reports

The utilization of minimum distance classification methods in remote sensing problems, such as crop species identification, is considered. Minimum distance classifiers belong to a family of classifiers referred to as sample classifiers. In such classifiers the items that are classified are groups of measurement vectors (e.g. all measurement vectors from an agricultural field), rather than individual vectors as in more conventional vector classifiers.

Specifically in minimum distance classification a sample (i.e. group of vectors) is classified into the class whose known or estimated distribution most closely resembles the estimated distribution of the sample to be classified. The measure of resemblance …

A Hardware And Software Interface Between A Magnetic Tape Unit And A Nova Mini-Computer, Thomas Dean Steury

Masters Theses

"This thesis is concerned with the general operation of the Kennedy Model 1400R incremental write/continuous read magnetic tape unit and the hardware design and software implementation needed to make it compatible for use with the Data General Nova 800 mini-computer.

The hardware design was developed around a General Purpose Interface Board which provides a standard set of logic needed for interfacing any external device to the Nova. The hardware consists of decode networks, mode selection networks, and I/0 timing networks. Special circuits needed to implement the hardware design and perform voltage conversions between the tape unit and the Nova computer …

Performance Comparison Of Receivers Designed To Combat Intersymbol Interference Due To Specular Multipath, George H. Smith

Masters Theses

"Bit error probabilities for biphase transmission have been computed for a known two-component multipath channel with a variety of suboptimum receivers. Performance curves are presented for each receiver, and the relative performance is summarized. Degradation due to imperfect channel knowledge is calculated, and the feasibility of countering this interference with these specially designed receivers is discussed"--Abstract, page ii.

A Sensitive Temperature Measuring System, Larry Dean Morris

Masters Theses

"A sensitive temperature measuring system, providing an analog output proportional to sensor temperature, has been designed for use in the wall temperature control system of a cloud simulation chamber. A platinum resistance element is the sensor, and a precision wirewound resistor is the reference in a bridge circuit which uses four low cost operational amplifiers arranged to provide two precision 1000 Hz current sources. Problems with an initial bridge amplifier design were corrected in the final design by the use of a low Q bandpass amplifier for the bridge signal followed by a phase detector and an output low pass …

Digital Registration Of Stereo Images Using The Fast Fourier Transform, Victor Francis Wilreker Jr.

Masters Theses

"The exact alignment of multispectral imagery is a requirement of any image classification system. This investigation develops a system of programs which result in a technique that corrects for the translational and rotational misalignment of two images. Rotational and translational components are determined by using the fast Fourier transform to find the points of maximum correlation between the two images. The registration of two equal but misaligned boxes is given as an example of how the transform technique is used in correlating the images. The results of registering two digitized images that were obtained by scanning a pair of color …

Data Compression Design Considerations For Airborne Test Vehicles, Kenneth Carlyle Pittman

Masters Theses

"The design goals for a data compression system are developed using previous studies as a cornerstone. Sampling theory is touched on with qualitative coverage of its effects. Consideration is given to various methods of data compression with the advantages and disadvantages of each noted. The requirement for buffering is discussed along with various methods that may be employed to achieve specific buffering goals. The impact of data reconstruction and how it may affect the choice of compression techniques is briefly covered. Selected compression algorithms and ways of increasing system effectiveness through alterations to their basic structures are described in detail. …

A Study Of Fmfb Demodulator Operation In The Presence Of Radio Frequency Interference And Gaussian Noise, Terry D. Wormington

Masters Theses

"A digital computer model of an FMFB demodulator has been used to study the effects of radio frequency interference on the detection of a sinusoidally modulated carrier. The effectiveness of selecting the feedback factor to suppress the interference for three values of modulation index is investigated. Also, the required IF bandwidth for the minimization of the mean-square error of the loop output between a signal corrupted by interference and the same signal without interference was investigated. More work is required before the effects of Gaussian noise plus interference on loop operation can be ascertained"--Abstract, page ii.

Decimal-Base Binary Logic (Dbbl) Adders And Registers, James Oliver Bondi

Masters Theses

"This paper discusses a new type of base n adder and storage register. This new type of logic is called "n-base binary logic", or NBBL. The NBBL system is compared and contrasted with the Post base n system (a type of n-valued logic), the binary-coded base n system, and the straight binary system. The main purpose of this paper is to show that a decimal, or base 10, system can have some important inherent advantages over a binary system, such as greater daily operational efficiency. Furthermore, it is shown that a "decimal-base binary logic" system, or DBBL system, has inherent …

A State-Space Approach To Rlct Two-Port Transfer-Function Synthesis, Eddie R. Fowler, Rao Yarlagadda

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents an interesting procedure for the synthesis of an RLCT two-part transfer function. An RLC ladder, consisting of n reactive elements and two resistors, is derived by using a tridiagonal matrix developed by Navot. The entries in this matrix are expressed in terms of the element values of the ladder network. Two voltage drivers are introduced into the ladder network to obtain a desired short-circuit transfer-admittance function numerator degree, using the classical theorems on transmission zeros. If the numerator degree of the transfer function is i (i < n), then, in general, (i) ladder networks need to be derived. The final network, corresponding to this transfer function, is obtained by paralleling the ladder networks (with transformers if necessary). Extensions to general short-circuit transfer admittance, open-circuit transfer impedance, and voltage transfer functions are briefly discussed. © 1972, IEEE. All rights reserved.

An Asynchronous Circuit Design Language System, Gregory Martin Bednar

Doctoral Dissertations

"This paper presents a system for specifying the behavior of asynchronous sequential circuits. The system consists of a special purpose Asynchronous Circuit Design Language (ACDL), a translator and a flow table generation algorithm. The language includes many special features which permit quick and precise specification of terminal behavior. It is best suited for problems originating from a word description of the circuit's operation. The translator is written with the XPL Translator Writing System and is a syntax-directed compilation method. From the translated ACDL specifications, the flow table algorithm generates a primitive flow table which is the required input for the …

A Learning Receiver For Communication In Three-Component Multipath Channels, Richard Paul Brueggemann

Doctoral Dissertations

"An adaptive receiver is designed for transmissions through a time-varying multipath channel which may include both specular and diffuse components. The design is based on the theory of unsupervised learning machines and the receiver is a recursive structure which does not grow in complexity with each new observation, but is Bayes' optimal at each instant of time. The multipath medium is modelled as an aggregate of L conditionally independent transmission paths, each consisting of random and/or fixed reflections, and is identified in terms of three components: (1) indirect diffuse scatter, (2) indirect specular reflection, and (3) direct transmission. The channel …

The Effect And Compensation Of Time-Base Perturbations In Analog Recording Systems, Clifford D. Skouby

Doctoral Dissertations

"The mean square error between recorded and reproduced signals is used as an error measure to determine the effects of time-base perturbations on an analog singal. The mean square error caused by time-base perturbations is shown to be proportional to the product of the square of the signal bandwidth and the time-base error variance for the case of low pass signal. When the signal is band pass, there is shown to be an additional error term which is proportional to the square of the signal center frequency and the time-base error variance.

Calculations are also carried out to determine the …

Iicads--Integrated Interactive Computer Aided Design System, Archie Golden Lambert

Doctoral Dissertations

"This research has three goals. The first goal is to develop a software interface (supervisor) to support and control a variety of interactive subsystem modules; thus eliminating manual scheduling of interactive jobs. The second goal is to develop a common methodology for interactive subsystem design. The third goal is to develop a linear systems analysis package using the facilities developed under the first two goals. A software interface (supervisor) to support and control a variety of interactive subsystem modules is described. The supervisor operates under the constraints of a large multiprogramming variable task operating system as opposed to a time …

Performance Of Self Bit Synchronizers For Binary Overlapping Signals, Chung-Tao David Wang

Doctoral Dissertations

"This research is concerned with the optimum and suboptimum ways of providing self bit synchronization for binary overlapping signals. A maximum likelihood synchronizer is derived as the optimum approach. The suboptimum ways are those employing decision-directed feedback and matched derivative filter techniques which are proposed for treating the overlapping signals. Combining the two suboptimum techniques along with the bandlimited version of the overlapping signal, a suboptimum synchronizer is derived. The performance of the above synchronizer is evaluated by Monte Carlo simulation techniques. Finally, a bit synchronizer using nonlinear filtering theory is considered. The performance of a nonlinear bit synchronizer is …

Computer Solution To Inverse Problems Of Elliptic Form: V²U(X,Y) = G(A,U,X,Y), Frederick Alvin Jeter

Dissertations and Theses

One important aspect of our present age of monolithic high speed computers is the computer's capability to solve complex problems hitherto impossible to tackle due to their complexity. This paper explains how to use a. digital computer to solve a specific type of problem; specifically, to find the inverse solution of a in the elliptical equation V²U(x,y) = g(a,U,x,y), with appropriate boundary conditions. This equation is very useful in the electronics field. The knowns are the complete set of boundary values of U(x,y) and a set of observations taken on internal points of U(x,y). Given this information, plus …

Centering In Parallel Channel Systems, Allen Katz

Dissertations

Several types of signal processing systems in which the signal flows along parallel channels in a fashion similar to the auditory system have been investigated. The effect of excitation with signals containing both single and multiple spectral peaks (formants) was considered. In particular, the effect of nonlinear interaction between channels, referred to as centering, in the presence of noise was studied.

These systems were investigated for their value, both as information processing networks and as models of the auditory system.

The analysis indicates that parallel channel systems, in general, exhibit excellent performance in the presence of noise, and that a …

Measurement Of Soil Moisture By Attenuation Of A Vertically Polarized Radio Wave, Arlo D. Mickelsen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this thesis is to determine feasibility and to investigate some of the problems encountered in making soil moisture measurements using radio wave propagation. The procedure consists of propagating a vertically polarized wave over the earth and measuring the field strength attenuation. A brief summary of present methods of measuring soil moisture is given.

Certain aspects of radio wave propagation theory are discussed, covering such topics as the surface wave, the space wave, the skin depth, and the effect of the dielectric constant on radio wave propagation. Based on this theory, measurement parameters such as frequency, antenna separation, …

The Development And Use Of Scattering Parameters For Semiconductor Junction Devices, Lee Dennis Philipp

Electrical and Computer Engineering ETDs

Scattering parameters are developed for diodes and tran­sistors. The parameters are developed through a modification of the wave equation from quantum mechanics. The effects of pulsed X-ray radiation on these devices is then calculated with the use of these parameters.

Various methods of analyzing semiconductor junction de­vices are discussed. These methods include diffusion theory, invariant imbedding and quantum mechanics. The background in these areas necessary for a discussion of semiconductor models is outlined.

Models resulting from the three basic approaches are presented. These include the Ebers-Moll Model, the Charge Control Model, the Linville Model, the Gore Model, the MLB (McKelvey, …