Digital Commons Network^™

Design Of A Microengineered Pressure Sensor, Ranjeet Alexis

Theses

A new family of microengineered vacuum ionization gauges of an approximate volume of 200µ³ has been designed. These devices can he fabricated using existing semiconductor processing capabilities. The focus of this thesis is to scale down the current state-of-the-art for ionization sensors to micron dimensions. These gauges can be manufactured economically and potentially will be integrated with more complex structures and circuitry. In these devices an active ionization volume of micron dimensions is used for launching ions in a trajectory towards a collection electrode. Ionization of gas species is accomplished by an electron flux of sufficient energy. Analysis of …

Hardware Algorithms For Computing Transcendental Functions, Xin-Pei Gong

Theses

The COordinate Rotation Digital Computer(CORDIC) is a special-purpose digital computer for real-time airborne computation. In this computer, a unique computing technique is employed which is especially suitable for solving the trigonometric relationships. A new computing technique based on the CORDIC algorithm is developed to reduce the number of iterations by one half for each input angle. This improvement is accomplished. by scanning multiple bits of the input angle(in our case, two) at a time. The CORDIC equations are rewritten accordingly and a hardware implementation structure is also presented. The results of the software simulation of the new algorithm are as …

Performance Evaluation Of Consumer Electronic Bus, Sairaj R. Pakkam

Theses

This thesis describes the performance evaluation of the Consumer Electronic Bus proposed by the Electronic Industries Association. To study the behaviour of CEBUS under different traffic conditions, a simulation program was developed modelling the layer architecture of CEBUS. The CEBUS is based on the ISO/OSI model of layered architecture. The simulation results have shown that, when the throughput of the network is small, the delay is bounded for all messages of all priorities. As the throughput of the network increases, under the presence of more high priority messages, the lower priority messages get queued at their nodes. It is also …

Visual Speech Training Aid For The Deaf, Subhashri Venkat

Electrical & Computer Engineering Theses & Dissertations

A computer-based vowel articulation training aid has been developed. A "continuous" acoustic-phonetic transformation is performed to map speech parameters to a lower dimensionality display space. There are two possible approaches to this transformation problem. The transformation could be either linear or a combination nonlinear/linear. The nonlinear transformation is performed using a multi-layered feedforward neural network with linear output layers. Speech parameters are extracted either from an analog filter bank arrangement (band energies) or by a digital signal processing procedure (Discrete Cosine Transform Coefficients). The speech parameters obtained from both methods correspond to the spectral envelope of the speech signals. The …

Encoding Phonetic Knowledge For Use In Hidden Markov Models Of Speech Recognition, Danming Qian

Electrical & Computer Engineering Theses & Dissertations

Hidden Markov models (HMM's) have achieved considerable success for isolated-word speaker-independent automatic speech recognition. However, the performance of an HMM algorithm is limited by its inability to discriminate between similar sounding words. The problem arises because all differences between speech patterns are treated as equally important. Thus the algorithm is particularly susceptible to confusions caused by phonetically-irrelevant differences. This thesis presents two types of preprocessing schemes as candidates for improving HMM performance. The aim is to maximize the differences between phonologically-distinct speech sounds while minimizing the effect of variations in phonologically-equivalent speech sounds. The preprocessors presented are a discrete cosine …

Improving Solids Conveying In Plasticating Extruders : An Investigation Into Manufacturing Processes And Manufacturing Systems For Profiled Thermoplastic Pellets, Oommen Cherian

Theses

The objective of the thesis is the manufacture of thermoplastic bilobal and trilobal profiled pellets for the determination of the interparticulate co-efficient of friction exhibited by solid beds of such pellets. The enhancement of the interparticulate coefficient of friction is expected to lead to ameliorated solids conveying rates in plasticating extruders.

Predicting the product shape from a profile die is very difficult due to the elastic memory of plastics and the complex boundary conditions. Consequently the cost involved in experimenting with different profile dies is high. Therefore a standard die with several die inserts of varying cross-sections were used to …

Small Disturbance Stability As Affected By Excitation Controls, Alfredo Flores

Theses

The effect of excitation control systems on the power system's small disturbance stability limits has been investigated in this thesis. Three excitation control schemes namely the proportional, fast?acting and the modified fast?acting have been studied.

The stability results were predicted directly in terms of the AVR gain controlling parameters following one?dimensional and two?dimensional frequency domain separation technique. The necessary algorithms and computer simulation programs have been developed.

In case of a modified fast?acting excitation control with three unknown variables, a procedure has been proposed to obtain the stability results by extending the two?dimensional frequency domain separation technique.

Effect Of Moisture On Microcircuit Failure, Chandrabala D. Patel

Theses

Stability and reliability of microcircuit is dependent on its design, fabrication, testing, storage and use.

In this thesis emphasis is given on various failure mechanisms of Integrated Circuits in humid environment and techniques of improving reliability. Other factors which affect the failure of integrated circuits are also discussed. Moisture induced failure modes, semi-reversible failures and irreversible failures (surface leakage current and corrosion-causing interruption of interconnection lines) are also reviewed.

Controlling the contaminants and moisture related corrosion are also covered. The quickest way to evaluate the reliability of microcircuit is by accelerated aging test and by selection of meaningful criteria of …

Computer Aided Localization Of Neurological Diseases, Yusuf Parlar

Dissertations

Computers in medicine has brought new dimensions and better understanding of uncertainties in the field of medical sciences in the last decade. This thesis is focused upon the localization of neurological lesions in the human nervous system. It relates clinical neurological test outcomes to pathways of function or malfunction. Certain methods are proposed-empirical. stochastic. Deterministic-to estimate the spatial distributions of lesion probabilities.

First. a Bayesian model is presented to estimate the posterior probability of lesion from a priori information, based on the test outcomes. Due to unavailable data alternative methods and models are presented: Regression Analysis. Monte Carlo simulation, and …

Design And Analysis Of Movable Boundary Allocation Protocol, Karun Sekhri

Theses

The increasing digital communications traffic will require very high speed networks. The use of high communication speed increases the ratio between end to end propagation delay and the packet transmission time. This increase causes rapid performance deterioration and restricts the utilization of the high system bandwidth in broadcast channel based systems. Using several parallel channels in place of a single channel improves this ratio. For a given system bandwidth the total system capacity is increased by bandwidth division and parallel communication. FTDMA protocols have been suggested for the parallel channel network and these protocols are suitable for different loads. In …

Multiprocessor System Design Tutor : Expert System Approach, Rakesh Kamdar

Theses

To increase computational bandwidth and system resilience, integration of several microprocessors in a single system becomes necessary. The overall throughput and efficiency of such a system is directly dependent on the hardware and software interconnection supported by the basic microprocessor chip. Sometimes it becomes difficult to put together all the information for design criteria and all the design related formulas.

The approach made here is to continuously update the hardware and software information in the database related to a given microprocessor. This information can be accessed at any time for efficient design solution. Intel 80386 and Motorola 68020 microprocessors are …

A Study Of The Effects Of Weighting Matrices In Power System State Estimation, Yanshi Wang

Theses

The effects of weighting matrices that may be used in the Weighted Least Squares (WLS) method when applied to the problem of Power System State Estimation (PSSE) are studied. These weighting matrices include the one usually used in the literature and the one used in the utility PSSE programs

The performances of these weighting matrices are compared using the Monte Carlo simulation technique.

To test the performances of the weighting matrices, a PSSE program is developed, different performance indices for state comparison are defined, and many cases are studied.

Results show that the weighting matrix usually used in literature, 1/σ², …

Design Of A Real Time Optical Sensor For Continuous Blood Cell Separation, Girish S. Yerande

Theses

For continuous measurement and display of oxygen saturation and RBC content in blood during cell separation a reflection type optical sensor is designed based on the theoretical model using the photon diffusion theory. The prototype sensor consists of two arrays of light emitting diodes, red and infrared, and photodiodes. The emission wavelength of LEDs are 660 nm and 800 nm. The 800 rim which is in the infrared region is very close to isobestic value for blood. The prototype sensor is mounted on the blood cell separator equipped with an antitwister mechanism. Each LED emits a specific wavelength of light …

A Micro-Based Machine Vision System, Hsueh-Chung Michael Feng

Theses

In this thesis, a low-cost general purpose machine vision system based on a personal computer of the PC-XT/AT family and an electronic camera controller based upon a Motorola 6811C11 single-chip microcontroller has been designed and implemented. This work is focused on image formation. The system supports a long distance camera-computer configuration. A picture editor, generic image manipulation software was designed and implemented. A single computer can supervise multiple cameras.

A Code Verification System For Ink Jet Printing, Daniel Liang Hsu

Theses

This paper describes system integration of a code verification system. The system utilizes a feature matching

Design Of An Ionized Cluster Beam System For Thin Film Deposition And Cluster Size Measurement, Steven K. Krommenhoek

Theses

This thesis describes a study of a unique deposition technique known as Ionized Cluster Beam (I.C.B.) deposition. According to I. Yamada and T. Takagi, the inventors of the I.C.B. concept, the beam of deposited material contains clusters as large as thousands of atoms. To study the mass distribution of the ionized species, an I.C.B. source was designed and built by the author. The design provided temperature control along the axis of the crucible by using electron beam heating with two independently controlled emission filaments. Special attention was given to minimizing the background of charged particles generated in various sections of …

Optimum Power System Planning, Youn Tae Kyong

Theses

This thesis presents analysis method of optimum power system planning. The Gauss-Seidel iteration method is used to calculate load flow data of power system. The real and reactive powers, voltage magnitude and phase angle at each bus were obtained using Gauss-Seidel iteration method for a given IEEE sample power system. The load flow calculations were repeated under 60 percentage, 70 percentage, 80 percentage, 90 percentage, 100 percentage loading condition.

The transformation of reference frames were performed to simplify given IEEE sample power system identification. The transformation of reference frame transforms real and reactive voltage, current and impedance variables(reference frame 1) …

Image Data Compression With Neural Networks, Jianjun Li

Theses

Three efficient image coding schemes, based orb neural networks, have been developed in this thesis: (1) Neural network vector quantization (NNVQ). The main advantage of this new technology is that it can accomplish the complex encoding process much faster than the previous algorithms. Its properties are studied and demonstrated by simulations. (2) A adaptive NNVQ for image sequence coding. Simulation experiments have been carried out with 4 x 4 blocks of pixels from an image sequence consisting of 40 frames. At 0.67 bits/pixel, this scheme achieves good image quality suitable for videoconferencing systems; (3) Neural network prediction. This new prediction …

Trellis Coded Tamed Frequency Modulation In Rayleigh Fading Channels, Kiran R. Patel

Theses

It is usually difficult to reduce the effects of channel impairements on transmitted information. A fading channel is one such media in which digital communications system operates. A signal is subject to distortion in amplitude and phase when propagating towards the receiver. This puts constraint in required SNR at the receiver, for given performance. Various modulation/coding and demodulation/decoding techniques are employed to lessen the effects of fading. Bit error rate is a performance parameter that sets the criteria for signal design, system architecture and performance.

Here, a slow Rayleigh fading channel with three propagation paths possesing a scattering function of …

Single Token Integrated Dama In Multiple Bus Local Networks, Srinivasan Ramadurai

Theses

Multiple-bus local Networks (MBLNs) provide an architecturally simple solutions to serve high-reliability-high capacity local area networks(LAN) applications. Access mechanisms for MBLNs possessing stability and favorable delay characteristics are developed in this thesis. A new technique is proposed that uses a single explicit token to achieve demand assignment multiple access (DAMA) to arbitrate access on all the buses in the system. Analytical model was developed and compared to simulation results that indicates performance improvement in terms of delay characteristics of the system of buses.

Application Specific Integrated Circuits For Single Board Computer, Ximing Shi

Theses

A single board computer is the central part of many microprocessor-based instruments. The implementation of the logic portion of a single board computer using Xilinx Logic Cell Array makes the computer system more powerful. Xilinx Logic Cell Array is a new kind of Programmable Gate Array in application specific integrated circuit with high design flexibility and functional density. The XACT Development System provides schematic capture and auto place-and-route for design entry.

In this thesis, a Xilinx Logic Cell Array was developed and implemented in the 8052AH-Basic based Single Board Computer design. Also, the logic and timing verification and simulation of …

Multi-Sensor System For An Articulated Robot Hand, Narendra Sucahyo

Theses

The precision and dexterity of a manipulator hand critically depends on the proper extraction and processing of sensory information. This thesis describes how a sensor system equipped with fingertip sensors and strain gauges can provide proper feedback to drive the grasp kinematics of an articulated robot hand. The grasp kinematic that provide the manipulator hand with precision and dexterity is based on impedance control. The fingertip sensors and the strain gauges are constructed of piezoresistive materials for force transduction. Through optimization, based on the sensitivity and capability of the sensors, a synergism of force and contact information can be obtained …

A Study Of Signal Cancellation Effects In Adaptive Arrays, Cheng-Der Sun

Theses

An adaptive array can automatically place pattern nulls in directions from which undesired signals (interference, jamming, or clutter, etc.) arrive and can also provide gain for a desired signal. The purpose of this study was to study the effects of the adaptive array on the desired signal while suppressing the undesired signal.

This was done by studying the transfer characteristics of the adaptive array between its input and output. In this study, C.W. jammers along with the desired signal were considered and input and output relationship of the adaptive array were determined. Several basic types of adaptive arrays were studied …

An Adaptive Robotic Controller With High Robustness, Xiao-Tian Wen

Theses

A complex industrial application of robotic manipulators are beyond the capability of the relatively simple constant gain linear control system. They compensate poorly for nonlinear dynamic model and environment changes, especially when the plant model comes with the unknown coefficients. An adaptive controller for a two joints robotic arm is designed in this thesis. Firstly, the highly coupled nonlinear model is linearized, and then an adaptive regulator is employed which adjust the controller parameters directly based on the on-line parameter estimation, where a least square identification is used. At last the computer simulation is also performed.

Automatic Infrared Inspection Of Solder Joints On Mounted Circuit Boards, Ken Kekuan Zhou

Theses

This thesis reports the research work on automatic infrared and visual light inspections of solder joints on printed circuit boards (PCBs) utilizing an image processing system and statistical pattern recognition techniques.

A small scale image processing system, consisting of a SUN workstation and several DATACUBE modules, is set up for the research. Software packages for imaging, displaying and solder joint inspection are developed and ready for public usage.

The capability of infrared inspection for solder joints on PCBs is demonstrated. The fusing of infrared and visual light imagery for the inspection is shown to offer better results than that obtainable …

A Stereo Vision Technique Based On The Multi-Positioned Camera Criterion, Jie Bao

Theses

A modified feature based stereo vision [sic] technique is described in this thesis. The technique uses the curve-segments as the feature primitives in the matching process. The local characteristics of the curve-segments are extracted by the, Generalized Hough Transform.

A set of images of a scene, which are taken by a multi-positioned camera satisfying the parallelism criterion, are first filtered by the Laplacian of a Gaussian operator in different widths, i.e. coarse to fine channels. At each channel, the Generalized Hough Transform is applied to the curve-segments in each image. The curve position, the curve-length, the curve centroid, the average …

An Implementation Of Mht Algorithm For Adaptive Transform Coding Of Speech, Peter Battenschlag

Theses

The Modified Hermite Transform (MHT), a suboptimum block transform scheme, is implemented on a TMS320C25 signal processing system with the objective of reducing the redundancy in speech signals and transmit a quantized vector representation at bitrates as less as 0.5 bits per sample.

The generation of the Hermite polynomials with a binomial and several first order IIR filter structures is presented focusing on the fact that no muliplications are required which simplifies the MHT algorithm considerably.

An assembler program performs forward and inverse transformation together with a vector quantization using adaptive bitallocation based on short-time statistics for the transform coefficients. …

Automatic Contour Extraction From Hvem Image Of Microvessel, Yong-Gang Liu

Theses

The research work reported in the thesis is motivated by the problem raised in the biomedical research utilizing high voltage electron microscope (HVEM) to study microvessels. There the contour data of cross-sections of microvessels are fed into some special electronic device to reconstruct three-dimensional pictures of microvessels. However, the contour data acquisition as routinely conducted by manual operation. This tedious procedure costs large amount of human power.

In this thesis, computer image processing techniques are applied to replace the time-consuming manual operation. A synthetic method is recommended. A software with various digital image processing functions has been developed and tested …

Temperature Dependent Current-Voltage Characteristics In Thin Sio2 Films, Jin Zhao

Theses

An analysis of the Fowler-Nordheim tunneling (FNT) theory and its application to temperature dependent current-voltage characteristics, of very thin films of SiO₂ on silicon, is presented. The final results are believed to provide the most complete examination of FN emission theory and predict the breakdown electric field in thin SiO₂ films. The role of the roughness, at the Si-SiO₂ interface, in determining the FNT current and breakdown mechanisms in metal-oxide-semiconductor (MOS) structures are also discussed.

The Parallel Implementation Of The Waveform Relaxation Method For The Simulation Of Structure-Preserved Power Systems, Marija D. Ilić, Mariesa Crow

Electrical and Computer Engineering Faculty Research & Creative Works

Several results pertaining to the partitioning of the waveform relaxation (WR) algorithm for dynamic simulation are presented. The WR algorithm is extended to a structure-preserving power system model in which the loads are retained. This results in a system of differential/algebraic equations (DAEs). Power systems are shown to exhibit several dynamic characteristics which make them suitable for simulation by the WR method. A heuristic method for determining a fault-dependent partitioning of the power system for parallel implementation is given.