Digital Commons Network^™

A Multimedia Manual On The World Wide Web For Telecommunications Equipment, Andrew L. Sears, Steve E. Watkins

Electrical and Computer Engineering Faculty Research & Creative Works

An interactive multimedia educational manual on the Internet through the World Wide Web for commercial optical fiber telecommunications equipment is described. The Telecommunications Laboratory Manual is a vehicle for enhancing engineering education with realistic laboratory or virtual laboratory experience. The manual provides a brief system tutorial, operating instructions, on-line help, and multimedia experimental demonstrations. It incorporates block diagrams, photographic images, and hypertext links that are mouse clickable, allowing users to access documents or links describing components or processes in any order. An experimental section guides students through laboratory experiences, demonstrates selected equipment characteristics, and provides for direct instructor contact through …

Three-Dimensional Display Utilizing A Diffractive Optical Element And An Active Matrix Liquid Crystal Display, Gregory P. Nordin, M. W. Jones, S. T. Kowel, J. H. Kulick, R. G. Lindquist

Faculty Publications

We describe the design, construction, and performance of the first real-time autostereoscopic three-dimensional (3-D) display based on the partial pixel 3-D display architecture. The primary optical components of the 3-D display are an active-matrix liquid crystal display and a diffractive optical element (DOE). The display operates at video frame rates and is driven with a conventional VGA signal. Three-dimensional animations with horizontal motion parallax are readily viewable as sets of stereo images. Formation of the virtual viewing slits by diffraction from the partial pixel apertures is experimentally verified. The measured contrast and perceived brightness of the display are excellent, but …

Analysis And Optimization Of A Banyan Based Atm Switch By Simulations, Syed Sohel Hussain

Dissertations and Theses

Asynchronous Transfer Mode (ATM) is proposed technology to create a broadband (high speed) packet switching network capable of transporting wide variety of services including voice, video and data in an integrated manner. The main concern in designing the switching fabrics used in this technology are speed, throughput, delay and variance of delay. We analyze the performance by simulations of ATM switch based on Banyan network in the uniform traffic condition.

We compare the analytical results obtained from three-state model Yan and Jenq to the simulation results. Based on observation of simulation results, we propose non-blocking first stage (NBFS) to increase …

Application Of Inversions To Lossless Image Compression, Ziya Arnavut

Department of Electrical and Computer Engineering: Faculty Publications

Linear prediction schemes, such as that of the Joint Photographic Experts Group (JPEG), are simple and normally produces a residual sequence with lower zero-order entropy. Occasionally the entropy of the prediction error becomes greater than that of the original image. Such situations frequently occur when the image data have discrete gray levels located within certain intervals. To alleviate this problem, various authors have suggested different preprocessing methods. However, the techniques reported require two passes. We extend the definition of Lehmer-type inversions (Lehmer 1960 and 1964) from permutations to multiset permutations and present a one-pass algorithm based on inversions of a …

Investigation Of Fundamental Emi Source Mechanisms Driving Common-Mode Radiation From Printed Circuit Boards With Attached Cables, David M. Hockanson, James L. Drewniak, Todd H. Hubing, Thomas Van Doren, Fei Sha, Michael J. Wilhelm

Electrical and Computer Engineering Faculty Research & Creative Works

Fundamental EMI source mechanisms leading to common-mode radiation from printed circuit boards with attached cables are presented in this paper. Two primary EMI source mechanisms have been identified: one associated with a differential-mode voltage and another associated with a differential-mode current, both of which result in a common-mode current on an attached cable. These mechanisms can be used to relate printed circuit layout geometries to EMI sources. The two mechanisms are demonstrated through numerical and experimental results, and an example from a production printed-circuit design is presented.

Motion Estimation And Video Coding, Xiaochun Xia

Dissertations

Over the last ten years. research on the analysis of visual motion has come to play a key role in the fields of data compression for visual communication as well as computer vision. Enormous efforts have been made on the design of various motion estimation algorithms.

One of the fundamental tasks in motion estimation is the accurate measurement of 2-D dense motion fields. For this purpose. we devise and present in this dissertation a multiattribute feedback computational framework. In this framework for each pixel in an image. instead of a single image intensity. multiple image attributes are computed as conservation …

Scheduling And Discrete Event Control Of Flexible Manufacturing Systems Based On Petri Nets, Huanxin Henry Xiong

Dissertations

A flexible manufacturing system (FMS) is a computerized production system that can simultaneously manufacture multiple types of products using various resources such as robots and multi-purpose machines. The central problems associated with design of flexible manufacturing systems are related to process planning, scheduling, coordination control, and monitoring. Many methods exist for scheduling and control of flexible manufacturing systems, although very few methods have addressed the complexity of whole FMS operations. This thesis presents a Petri net based method for deadlock-free scheduling and discrete event control of flexible manufacturing systems. A significant advantage of Petri net based methods is their powerful …

Novel High-Speed Architecture For Machine Vision Applications, Bassam S. Farroha, Raghvendra G. Deshmukh

Electrical Engineering and Computer Science Faculty Publications

This paper focuses on producing a state-of-the-art technique for designing an image recognition system for machine vision applications. The motivation behind the new system design is to provide a unique methodology, using strategic design techniques, to implement a system that addresses real-world image recognition applications. The introduction of application-specific, massively parallel array of processors, where low-level processing is accomplished on reconfigurable hardware structures, highlights the scheme. The system was built and simulated on a VLSI chip and results were verified using Electric Rules Check and Harris Timing Analysis examination tools. The system is composed of there functional layers and a …

Real-Time Implementation Of An Adaptive Control System For A 3-Zone Rapid Thermal Processing Station, David Hur

Theses

In this thesis, the implementation details of a real time adaptive control system for a TI 3-zone RTP station, as well as the simulation and the experimental results are presented. Extensive simulation of the system is performed in order to ensure proper operation of the system. The experimental results are used to verify proper operation of the closed loop control system. Initial experiments were conducted using two thermocouples. Further experiments were conducted using one thermocouple for the purpose of testing the performance of the system using Extended Kalman Filter as the state estimator.

The implementation of the control system is …

Generation Of Synthetic-Focus Images From Pulse-Echo Ultrasound Using Difference Equations, Daryl G. Beetner, R. Martin Arthur

Electrical and Computer Engineering Faculty Research & Creative Works

To produce a complete-dataset, pulse-echo image requires a knowledge of the time of flight (TOF) from each source to each sensor in the transducer array for each site to be imaged. Increasing the speed of TOF calculation is important in adaptive-focus schemes. The authors determined TOF more rapidly than via direct calculation by representing TOF surfaces by two-dimensional (2-D), positive-integer-degree polynomials implemented in their forward-difference form. Errors which accumulate due to the use of a difference equation depend on the degree of the polynomial and on the size of the image. The number of bits needed to address echo samples …

Real-Time Visual Speech Articulation Training Aid, Neiyer S. Correal

Electrical & Computer Engineering Theses & Dissertations

A real-time visual articulation training aid has been implemented. It provides instantaneous visual feedback of vowel and stop-consonant production on a computer screen. The vowel training system corresponds to an improved floating-point implementation of a previous fixed-point system developed by Beck (1992). The new implementation provides better accuracy and an approximate five-fold increase in speed. Acoustic features computed from global short-time spectral shape are used for classification of vowels. Temporal spectral trajectories timed to begin with burst onset are used for stop consonants. A neural network is used to transform measurements of auditory stimuli from the feature space to a …

Resource/Dataflow Graph Operating System Development, Sriram J. Coimbatore

Electrical & Computer Engineering Theses & Dissertations

Implementation of a new dataflow schedule model is the objective of this thesis. The dataflow model algorithm called the resource/dataflow graph model is implemented on a peer-to-peer communication network comprising of six personal computers. This dataflow model is implemented making use of an earlier dataflow model called ATAMM (Algorithm to Architecture Mapping Model) developed by ODU and National Aeronautics and Space Administration (NASA). Development issues include modification of the RDFG testbed operating system and a scheme to transfer data buffers using the ethernet channel from one processor to another processor. This, in turn, equips each sub-module of an application with …

Nlo Waveguide "And" Switch And Method Therefor, John J. Kester, Iyad A. Dajani, Peter M. Ranon, Thomas G. Alley

AFIT Patents

Method and apparatus are provided for NLO switching by first providing a phase-matched SHG grating which outputs a reinforced SHG beam only when two input beams of frequency (ω) are present in two modes of such wg. The so encoded NLO switch is operated by directing at least two input pulsed laser beams of frequency (ω) into the two modes of the wg to generate a reinforced pulsed output SHG beam and output same from the wg in an NLO switching process. The two input beams desirably have a separate pulse train and the spatial and temporal overlap of the …

Real-Time Optically Processed Face Recognition System Based On Arbitrary Moiré Contours, Rafael A. Andrade, Bernard R. Gilbert, Donald W. Dawson, Chris L. Hart, Samuel Peter Kozaitis, Joel H. Blatt

Electrical Engineering and Computer Science Faculty Publications

We demonstrate a hybrid electronic-optical real-time system that performs 3-D face recognition. We constructed custom reference gratings that formed a desired moire pattern when mixed with images of structurally illuminated faces. The moiré patterns could be in any form such as, equal depth contours, error maps, or any arbitrary pattern. We demonstrate video methods to generate such error maps in real time, thus developing a real-time automated face recognition system based on the optical processing of arbitrary moiré contours. We chose the moiré pattern to be in the form of a Fresnel zone plate, which is displayed on a liquid …

Hybrid Kalman / Minimax Filtering In Phase-Locked Loops, Daniel J. Simon, Hossny El-Sherief

Electrical and Computer Engineering Faculty Publications

A method of combining Kahnan filtering and minimax filtering is proposed and demonstrated in an application to phase-locked loop design. Kalman filtering suffers from a lack of robustness to departures from the assumed noise statistics. Minimax filtering, however, has the drawback of ignoring the engineer's (admittedly incomplete) knowledge of the noise statistics. It is shown in this paper that hybrid Kalman/minimax filtering can provide the “best of both worlds” . Phase-locked loop filter design is used in this paper to demonstrate an application of hybrid estimation.

An Empirical Comparison Of Area-Universal And Other Parallel Computing Networks, Ronald I. Greenberg, Lee Guan

Computer Science: Faculty Publications and Other Works

This paper provides empirical comparison of the communication capabilities of two area-universal networks, the fat-tree and the fat-pyramid, to the popular mesh and hypercube networks for parallel computation. While area-universal networks have been proven capable of simulating, with modest slowdown, any computation of any other network of comparable area, prior work has generally left open the question of how area-universal networks compare to other networks in practice. Comparisons are performed using techniques of throughput and latency analysis that have previously been applied to k-ary n-cube networks and using various existing models to equate the hardware cost of the networks being …

A Multi-Institutional Cooperative Approach To Power Engineering Education, Anil Pahwa, Kraig J. Olejniczak, S. D. Sughoff, Shelli K. Starrett, Mariesa Crow

Electrical and Computer Engineering Faculty Research & Creative Works

This paper describes the multi-institutional cooperative effort between the University of Missouri--Rolla, Kansas State University, and the University of Arkansas to develop two new courses in flexible power system control.

Effect Of Unbalance On Power System Components In The Presence Of Harmonics, Jessica Williams

All Theses

No abstract provided.

Multiresolution Wavelet Processing For Binary Phase-Only Filters, Samuel Peter Kozaitis

Electrical Engineering and Computer Science Faculty Publications

We used the discrete wavelet transform to approximate an image at a lower resolution in preparation for object recognition using correlation techniques. We cross- correlated the low-resolution image with a similarly processed image containing an object of interest. Then, we synthesized the cross-correlation result to the resolution of original image. Using this approach, we avoided cross- correlating an image multiple times and passing information between levels of an image representation such as an image pyramid. We satisfactorily identified objects at 1/4 resolution using the wavelet representation and binary phase-only filters. We chose wavelets based on their impulse response and found …

Acuta 25th Annual Conference- Silver Anniversary- July 14-18, 1996- Chicago Hilton & Towers.

ACUTA: Other Publications

Registration & Hotel Information

Registration if postmarked by June 24, 1996.(Extended from June 14)

. Member Institution/Associate Member - $525. Corporate Affiliate - $525. Non-Member - $650

Registration if postmarked after June 24, 1996.

Member Institution/Associate Member - $57. Corporate Affiliate - $575 . Non-Member - $700

Hotel: Chicago Hilton & Towers

312-922-4400. Rates are $118 Single or Double. Be sure and mention the ACUTA rate! Cutoff date

for hotel is June 19,19961

Due to the popularity of this event and the Chicago destination, the hotel is full on some nights.

However, the ACUTA rate of $ll8 single/double per night …

A Cascadable Pragmatic Block Decoding Algorithm Exploiting Channel Measurement Information, William H. Thesling, Fuqin Xiong

Electrical and Computer Engineering Faculty Publications

The complexity of algorithms to perform soft decision decoding on block codes has impeded their inclusion in practical systems. A well-known class of algorithms for decoding block codes utilizing channel measurement information along with the algebraic properties of the code are the Chase algorithms.¹ In this paper a decoding method similar to Chase's third algorithm is presented. However, in this method, a single test pattern or alternate codeword makes up one stage of the decoder. The method uses information from the previous decoding(s) to assist in generating a test pattern. This single stage ‘Second Chance Algorithm’ can then be …

Visual Speech Recognition Using Multiple Deformable Lip Models, Devi Chandramohan

Electrical & Computer Engineering Theses & Dissertations

Motivated by the fact that human speech perception is a bimodal process (auditory and visual), several researchers have designed and implemented automatic speech recognition (ASR) systems consisting of both audio and visual subsystems, and shown improved performance relative to traditional purely auditory systems. Several visual speech reading approaches have used deformable templates to model the shape of a speaker's lips. Deformable templates are models of image objects, which can be deformed by adjusting a set of parameters to match the object in some optimal way, as defined by a cost function. Using a single deformable lip model has disadvantages such …

A Modularized Software Package For Adaptive Beamforming, Shun-Hsyung Chang, Shao-Wei Leu, Hsing-Wang Liang

Journal of Marine Science and Technology–Taiwan

This paper presents a modularized simulation software package for adaptive beamforming. In recent years, the theory and technology of adaptive beamforming have been applied extensively in many different areas such as radar, sonar, communication systems, and geophysical exploration. As many new beamforming architectures and related algorithms are being introduced, researchers find themselves repeating the laborious process of writing similar software routines in order to conduct simulations. This is largely due to the lack of well-defined and modularized supporting software. Therefore, we have implemented a collection of representative algorithms available for adaptive beamforming and constructed a simulator with menu-driven user interface. …

Network-Integrated Ship Automatic System And Internetworking To The Internet, Li-Der Chou, Jeng Yih Juang

Journal of Marine Science and Technology–Taiwan

Many automatic systems developed for the merchant ships are focused on the Unmanned Machinery Space (UMS), and therefore it is necessary to build a local area network (LAN) on the ship in order to integrate these automatic systems. By means of the Inmarsat satellite system, the shipboard LAN is interconnected with the terrestrial communication networks such as the Internet. In the paper, the shipboard LAN is designed from the view point of survivability, and three concepts to reduce the satellite communication cost for the interconnection of the shipboard LAN and the Internet are proposed. Finally, the way to implement the …

Fluid Delivery System By Process Control, Anthony D. Banks

Electronic Dissertations and Theses

The purpose of this design project is to design and demonstrate a complete mechatronic system that will regulate a desired temperature of a fluid and control the rate at which it is delivered. This system can serve several purposes and have numerous applications. In particular, applications are inclusive of, but not limited to the medical administration of certain types of medication. The Fluid Delivery System By Process Control can be utilized to control any number of factors such as the temperature of the medication, rate of administration, flow control, mixture ratios, and time and frequency of administration.

Investigation Of Radio Wave Propagation In The Martian Ionosphere Utilizing Hf Sounding Techniques, Robert J. Yowell

Theses and Dissertations

This thesis presents a preliminary design of an ionospheric sounder to be carried aboard one or more of NASA's Mars Surveyor landers. Past Russian and American probes have indicated the existence of an ionosphere, but none of these missions remotely sensed this atmospheric layer from the surface. The rationale for utilizing a surface-based Martian ionospheric sounder is discussed. Based on NASA's choice of launch vehicle and power source, a low-weight, low-powered Chirp sounder using a horizontally-polarized dipole antenna is recommended for the sounder experiment. The sounder experiment should be conducted for at least one Martian year, in order to investigate …

Characterization And Fabrication Of A (6h)-Sic As A Piezoresistive Pressure Sensor For High Temperature Applications, Robert Sylvester Okojie

Dissertations

A prototype monolithic 6H-SiC pressure sensor operational up to 350°C, with potential to operate up to 600°C, was batch fabricated and tested. At temperatures higher than 450°C, silicon diaphragms creep under minimal load. To operate beyond 450°C, therefore, the use of 6H-SiC was proposed. However, three key technological issues - fabrication, high temperature metallization, and gage factor characterization - had to be resolved. Since conventional fabrication technology is not applicable to SiC due to its near inert chemistry, photoconductive selectivity techniques to etch the piezoresistors were developed. Techniques to wet etch the cavities in a dark current mode were developed, …

Explicit Congestion Control Algorithms For Available Bit Rate Services In Asynchronous Transfer Mode Networks, Ambalavanar Arulambalam

Dissertations

Congestion control of available bit rate (ABR) services in asynchronous transfer mode (ATM) networks has been the recent focus of the ATM Forum. The focus of this dissertation is to study the impact of queueing disciplines on ABR service congestion control, and to develop an explicit rate control algorithm.

Two queueing disciplines, namely, First-In-First-Out (FIFO) and per-VC (virtual connection) queueing, are examined. Performance in terms of fairness, throughput, cell loss rate, buffer size and network utilization are benchmarked via extensive simulations. Implementation complexity analysis and trade-offs associated with each queueing implementation are addressed. Contrary to the common belief, our investigation …

Design, Process And Performance Simulation Of A 360x360-Element Very High Frame Rate Burst-Image Sensor, Guang Yang

Dissertations

A process was developed for fabrication of 360x360-element Very High Frame Rate (VHFR) burst-image sensor on the bases of one-dimensional (1-D) and two-dimensional (2-D) device and process simulations using SUPREM III, SUPREM IV, PISCES IIB and ISE-TCAD software, and the process data provided by the David Sarnoff Research Center. This process includes SiO₂-Si₃N₄ gate dielectric, four-levels of polysilicon, three-levels of metal, eight implants, and requires twenty-one mask levels. The imagers with a 2-cmx2-cm chip size were fabricated at the David Sarnoff Research Center. The VHFR burst-image sensor is capable of capturing images at frame rates …

A Full Wave Method For Rough Surface Scattering Using Fictitious Current Distributions, Anthony A. Triolo

Dissertations

Rough surface scattering is a current topic of interest in many diverse fields. But, despite its importance, the two most widely used solution methods, the Kirchhoff and first order perturbation methods, are valid only for a restricted range of surface types. There is a large range of surface statistics for which neither of these theories is valid. There are purely numerical solutions to the problem, i.e., the integral equation technique and FDTD method, but these methods require a prohibitively large amount of computer time and storage space for use in practical applications. A full wave method has been introduced by …