Digital Commons Network^™

Kinetic Measuremenmt Of Decomposition Of Aniline, 2,4-Dichlorophenol And 1,2,4-Trichlorophenol Using A Calorimetric Method, Ming-Chin Chang

Theses

Biological treatment techniques for detoxification of toxic organic compounds have been studied and applied for many years. There are many research and commercial applications proving that the biological method is more economic and efficient than the other treatment methods.

The traditional biomass measurements are time-consuming tasks. Researchers have intended to develop a simpler, faster, and also accurate method for determining the bioactivity. This study has tried to use the microcalorimetric method to monitor the energy productions from the degradation of aniline, 2,4-Dichlorophenol and 1,2,4-Trichlorobenzene. Thereafter, by utilizing the data obtained from the present study, it was possible to compute kinetic …

Modeling Techniques For Water Supply Forecasting In The Western United States, David Charles Garen

Dissertations and Theses

Water supply forecasting in the western United States is the prediction of the volume of water passing a given point on a stream during the primary snowmelt runoff season. Most water supply forecasts are produced from multiple linear regression models using snowpack, precipitation, and streamflow measurements as independent variables. In recent years, conceptual watershed simulation models, typically using a time step of one day, have also been used to produce these forecasts.

This study examines model usage for: water supply forecasting in the West and has three specific purposes. The first is to examine the traditional usage of multiple linear …

A General Three Dimensional All Quadrilateral Surface Mesh Generation Algorithm, Roger Cass

Theses and Dissertations

Among the available all-quadrilateral mesh generation algorithms progressive-front offers the best quality and robustness. The paving algorithm is a progressive-front technique that generates a two dimensional mesh of all quadrilaterals on planar surfaces. The technique is particularly suited to meshing irregular boundaries with interior holes. This thesis presents an extension of the paving algorithm to generalized three dimensional surfaces. The major problems in three-dimensional surface mesh generation are projection of nodes, calculation of interior angles, and connection of mesh fronts. The solutions to these problems are presented. This work is part of the ongoing CUBIT project at Sandia Labs. The …

Materially Nonlinear Finite Element Analyses Of Trusses And Slab-On-Grade Problems, Moayyad Moh'd Al-Nasra

Civil & Environmental Engineering Theses & Dissertations

The overall approach is to employ the finite-element method along with specified material models to account for material nonlinearity. This study includes two different applications: truss structures and slabs-on-grade.

Procedures for materially nonlinear analysis of truss structures, which apply for both determinate and indeterminate cases are proposed. The proposed procedures are simple and can handle a variety of different stress-strain functions, and the applied load does not have to be incremental. Proposed procedures results are verified with the output of NASTRAN.

A finite-element model for slab-on-grade is introduced. The concrete slab is represented by eight-node brick elements, and the joints …

The Effect Of Flange Restraint On Web Crippling Strength, Bhavnesh H. Bhakta, Roger A. Laboube, Wei-Wen Yu

CCFSS Library (1939 - present)

PREFACE When considering the web crippling strength of a cold-formed steel member, the current edition of the AISI Specification for the Design of Cold-Formed Steel Structural Members does not distinguish between the behavior of a member having its flanges attached to a support member, and a member not attached to its support. To enhance the industry and design professional's understanding of web crippling, a pilot study was initiated at the University of Missouri-Rolla to explore the influence of flange attachment. The financial assistance for this research was provided by the Metal Building Manufacturers Association (MBMA) and the American Iron and …

Mathematic Models On Leaching Behavior Of Chemical Solidification And Stabilization Process For Heavy Metal Sludges, Sz-Hung Chen

Theses

Chemical Solidification and Stabilization of toxic metal-containing sludges is one of the most important problems for environmental protection. Although Chemical Solidification and Stabilization of hazardous wastes prior to disposal is increasing in importance, very little work has been done concerning the leaching mechanisms and kinetic models.

In this study, we apply Freundlich & Langmuir isotherms on Chemical Solidification and Stabilization process, and the theoretical results match with experimental data very well. In the same time, we develop a simple methematical kinetic model which relates leaching concentration of heavy metal to curing time. In this study kinetic model, what you need …

Dynamic Plug Flow Reactor Network Model For Contaminant Transport In Water Distribution Systems, James Uber, Ken Hickey, Mao Fang, Lew Rossman

United States Environmental Protection Agency: Publications

We present a network water quality model that idealizes the distribution system as a network of ideal flow reactors, namely plug flow reactors. The plug flow reactors are linked together through an assumption of complete mixing at the network nodes. The resulting system of coupled 2-D (space - time) partial differential equations are discretized spatially using a finite difference scheme, and solved by numerical integration. The model will be evaluated with regard to its prediction capabilities, relative to previous modeling efforts.

Bulletin No 4216 - Broadscale Boom Spraying, Roger Doyle, Gary Dorr, Des Gilbey, John Peirce

Bulletins 4000 -

For spraying to be effective it must do the job required at a minimum cost, with no unwanted side effects. It is impo1tant to use the right chemical at the right rate, at the right tin1e and in the best conditions.

It is just as important that both the sprayer and the way it is used allows you to meet this objective. This Bulletin will help you select the right boom sprayer, maintain it for efficient operation and use it efficiently and safely.

Pavement Deflection Evaluations, R. Clark Graves, David L. Allen

Kentucky Transportation Center Research Report

In this study a procedure has been developed to evaluate the structural condition of pavements using Road Rater deflection measurements. These procedures compare actual field deflections with deflections calculated by the Chevron N-Layer linear elastic computer program. The results obtained from these procedures are the layer moduli of the pavement materials. Procedures have been developed for asphaltic concrete pavements and composite pavements, including broken and non-broken concrete layers. This report also contains a comparison of structural overlay determined using the results of the new procedure, with overlays calculated using results from the 2-3 Projected procedure currently used by the Pavement …

Express Transit Service For The University Of Central Florida, Arturo J. Perez

Retrospective Theses and Dissertations

As one of the fastest growing universities in the State of Florida, the University of Central Florida (UCF) is faced with the hardships placed on higher learning institutions across the nation. The increase of students paralleled by the increase of motor vehicles on the university campus, and the shortage of funding needed to construct the necessary parking facilities to support this growth, has left the University with a big dilemma, whether to try to overcome the parking space deficit by building the needed spaces to accommodate the demand, or provide a mass transit system that would reduce the number of …

Seismic Response Of Pipeline Systems In A Soil Liquefaction Environment, Hongzhi Zhang

Civil & Environmental Engineering Theses & Dissertations

This research is a study of the general seismic response behavior of buried pipeline systems during a soil liquefaction process. To aid the design of buried pipelines in a soil liquefaction environment, the purpose of this research is to provide the basic dynamic seismic response of different pipeline systems. Several important parameters such as pipe diameter, buried depth, additional mass and the size of the liquefiable soil zone have been introduced. The pipeline systems under study are cross-types, T-types and straight pipelines, with or without a manhole, buried in a soil liquefiable zone.

Time-varying soil spring constants are used for …

Evaluation Of Mechanisms Of Alteration And Humification Of Pahs For Water Quality Management, Ronald C. Sims, Carolyn K. Abbott

Reports

Introduction: Creosote-pentachlorophenol (PCP) is a mixture commonly used as a wood preservative in the U.S. (1). A 1988 survey (2) indicated that 1,397 wood preserving waste contaminated sites exist in the United States consisting of 555 active wood treatment plants and 842 inactive plants. Stinson (3) indentifed 58 wood preserving sites on the National Priorities List, of which 51 have PCP and/or creosote or polycyclic aromatic hydrocarbon (PAH) contamination. Principal classes of organic constituents present in creosote waste are PAHs (~85% by weight) and phenolics. PAHs with less than three fused benzene rings comprise 69% (i.e., naphthalene, anthracene and phenanthrene); …

Bioengineering For Water Cleanup: State-Of-The-Art Assessment, Judith L. Sims, Ronald C. Sims, Jon S. Ginn

Reports

No abstract provided.

A Spatially Distributed Water Balance Based On Physical, Isotropic And Airborne Remotely Sensed Data, C. M.U. Neale, David G. Tarboton, J. J. Mcdonnell

Reports

Introduction: The objective of this research to develop a spatially distributed water balance model based on the integration of spatially distributed data. Progress this year has consisted of model development, instrument acquisition, installation and development of experimental procedures, and baseline data collection. The original research plan called for detailed observations related to the water balance over the year September 1991 to August 1992. The detailed measurements were to start with accumulation of the snowpack followed by melt and evapotranspiration measurements from March to August. The objective was to measure the energy balance parameters starting with the peak accumulation, through the …

Composting Of Explosives Contaminated Soil Using The White Rot Fungus Phanerochaete Chrysosporium, Michael J. Mcfarland, Shashi Kalaskar, Eric Baiden

Reports

Bioaugmentation using the white rot fungus Phanerochaete chrysosporium was found to be effective in enhancing TNT removal in lightly (i.e., below 100 mg/kg) contaminated soil. The percent reduction in TNT increased from 15% to 53% when soils were treated with fungal inoculated organic material. Maximum removal rates improved from 0.33 mg TNT/kg-day to 0.76 mg TNT/kg-day during the same treatment. Neither fungal inoculation nor organic amendment addition resulted in improving TNT removal kinetics in highly contaminated soils (i.e., above 1000 mg/kg). Executive Summary: Laboratory scale compost studies were conducted to evaluate the effect of bioaugmentation with the white rot fungus,

Nonparametric Stratigraphic Interpretation From Drill Log Data, Upmanu Lall, A. I. Ali

Reports

Near surface groundwater contamination is a widespread problem. The potential for contamination of deep aquifers in such areas depends on the vertical hydraulic gradient as well as the extent and location of interconnection between the upper and lower aquifers. In alluvial, sedimentary environment, the geologic units are typically weakly connected lenses or layers of high or low conductivity with variable size, geometry and orientation. Drill logs provide qualitative, local information on such aquifer heterogeneities. A binary (high or low conductivity) indicator function is used to describe the aquifer system. A nonparametric statistical methodology for assessing the probability that a particular …

Fate And Transport Of Tce-Petroleum Hydrocarbon Mixture At Uttr, G. Nash Quashiga, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

In 1988 a preliminary assessment (PA) study was conducted at Chemical Disposal Pit No. 4 to address several concerns of Hill Air Force Base (HAFB), the facility operators. The objectives of the PA were; i) to assess the potential for organic chemical releases to the subsurface environment, and ii) to determine the need for any immediate control measures, if the subsurface environment were threatened.

Optimizing Ground Water Planning And Management, Richard C. Peralta, L. S. Willardson

Civil and Environmental Engineering Faculty Publications

Simulation/optimization (S/0) models can be used to speed the process of computing long term groundwater pumping strategies. These combined models can also greatly ease the planning tasks of water management agencies. They make the process of computing optimal perennial yield groundwater management strategies fairly straightforward. S/0 models dramatically improve conjunctive water management and can help minimize the cost of groundwater contaminant clean-up. The differences between S/0 models and the simulation (S) models currently used by over 98 % of practitioners are illustrated with recent applications of S/0 models in regional planning.

Optimal Groundwater Quantity/Quality Planning For Salt Lake Valley, Ali Gharbi, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

Generally, the embedding technique for optimizing groundwater management has been limited to small scale or steady-state groundwater flow management cases. The embedding approach causes sparse, highly structured constraint matrices which have been sometimes difficult to solve. Embedding applications have been limited by lack of: optimization algorithms able to easily address such matrices for large scale problems, and efficient methods for addressing common nonlinearities and converging to a solution. Computer software, USUEM, addresses these issues by: creation of alternative linear, nonlinear, combined and partitioned formulations of the same problem, implemention of an efficient cycling procedure, and good selection of optimization algorithm …

Pluman, Decision Support System For Groundwater Contaminant Plume Simulation/Optimization Management Model, Herminio H. Suguino, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

No abstract provided.

Parameter Uncertainty And Modeling Of Sludge Dewatering In One Dimension, Joseph H. Plaskett

Dissertations and Theses

Separation of liquid from solids is a necessary step in the ultimate disposal of wastewater sludges. Most commonly, sludges are dewatered by pressure-filtration methods. Mathematical models of the physics of the sludge dewatering process would provide the ability to predict dewatering performance and optimize the design and operation of dewatering facilities.

The Development Of A Highway Revenue Forecasting Model For Indiana, Amit H. Varma, Kumares C. Sinha, Jeffrey L. Spalding

JTRP Technical Reports

No abstract provided.

Behavior Of Square And L-Shaped Slender Reinforced Concrete Columns Under Combined Biaxial Bending And Axial Compression, Wen Hu Tsao

Dissertations

A numerical analysis was developed to evaluate the complete load-deflection and moment-curvature relationships for square and L-shaped slender reinforced concrete columns subjected to biaxial bending and axial load. This computer model can be used for any cross section geometry and material properties of normal concrete. The analysis was based on a deformation control and both the ascending and descending branches of curves can be studied. The finite difference method was introduced to calculate the deflections which satisfy the compatibility equations. Six square slender columns and eight L-shaped slender columns were tested to compare their experimental load-deformation results with the analytical …

The Hydraulic Performance Of A Vortex Tube Foector, F Mtaro

Tanzania Journal of Engineering and Technology (TJET)

The vorle.r tube silt exrrac/or consists of a pipe, rhe crest of which has a slit and lies flush across lhe canal bed.With minimal warer loss, I.oe bedload is extracted through lhe slil settling canal back ro the river, thus reducing or eliminating the bedload transported in main canal. Ihe resulting swirling flow phenomena is of complex nature and depends on sc conirol paramerers, as a result of which previous empirical design approaches have yielded conflicting guidelines. By means Of a simplified hydraulic system, the flow mechanism and energy in rhe can be determined.

Bridge Deterioration Models, Christopher R.H. Howard

Theses

The deteriorated condition of America's bridges raises the need for a proper and optimal method of bridge management, from the conceptual stage through the construction stage, and throughout the useful life of our bridges. State agencies need to expand their data collection process so as to include additional information pertinent to the formulation of a credible system. This is critical in order to accommodate increased research efforts to investigate the behavioral pattern/s of the nations bridges and to eventually optimize bridge management systems. This thesis looks at the bridge deterioration model as a vital tool in realizing more effective bridge …

Flood Forecasting In Tanzanian Catchments, Omari Rumambo

Tanzania Journal of Engineering and Technology (TJET)

Floods are still a problem to many countries in the world todate. Floods do cause damages to property and sometimes loss to human life. Flood control measures by structural and non—structural methods are avail able in the literature . However , structural flood control measures are financially infeasible in most developing countries today. Flood forecasting is a non—structural measure for reducing flood damages. It is a means of providing early The Li near f 1 ood warnings to flood prone areas . Perturbation Model has been appl ied for real time flood The Linear forecasting in Tan zanian catchments . …

Experimental Investigations On The Behaviour Of Wood In Transverse Compression, A Mrema

Tanzania Journal of Engineering and Technology (TJET)

Experimental investigations were done to study the behaviour of wood in transverse compress ion. Three key variables were incorporated in the experiments to study their influence on the •nriables were the orthotropic ratio of the behav iour. These material, the geometry of loading and that of the specimen . Deformation measurements were made at selected locations on test specimens by means of strain—gage based clip gages. Results from the experimental measurements were compared to previous deformation predictions made by a finite element analysis (9) . There is a very good agreement between measured values and those obtained trom the finite …

A Finite Element Analysis Of Wood In Transverse Compression, A Mrema

Tanzania Journal of Engineering and Technology (TJET)

A two dimensional finite element analysis is utilized to predict the stress and strain distributions for wood in transverse compression. Important key var iables are incorporated into the ana lysis to define their influence on the stress and strain distributions. These variables are geometry of loading, geometry of specimen and the orthotropic ratio of the material. Based on the finite element analysis results, relationships are arising stress from developed relat ing maximum stress concentrations to the above three variables. possible appl ications of the results from this study relate to the development of more efficient design of connections such as …

Strength And Fragility Of Concrete, Kang-Qun Shao

Theses

It is known that both strength and fragility are two of the most important properties in concrete. In this research, theories of Chemistry, Physical Chemistry of Surfaces, Thermodynamics and Fracture Mechanics are used to study the relationships between the macromechanical behavior of concrete and the microstructure in concrete. The objectives of this research are therefore to find some effective ways to explain theoretically why the concrete is so brittle (fragile) and how to increase its strength or to decrease its fragility. Based on the present studies, an equation is formulated to calculate the coefficient of the fragility (or brittleness) of …

Stochastic Hydrologic Modeling In Real Time Using A Deterministic Model (Streamflow Synthesis And Reservoir Regulation Model), Time Series Model, And Kalman Filter, Philip Kwok Fan Tang

Dissertations and Theses

The basic concepts of hydrologic forecasting using the Streamflow Synthesis And Reservoir Regulation Model of the U.S. Army Corps of Engineers, auto-regressive-moving-average time series models (including Greens' functions, inverse functions, auto covariance Functions, and model estimation algorithm), and the Kalman filter (including state space modeling, system uncertainty, and filter algorithm), were explored. A computational experiment was conducted in which the Kalman filter was applied to update Mehama local basin model (Mehama is a 227 sq. miles watershed located on the North Santiam River near Salem, Oregon.), a typical SSARR basin model, to streamflow measurements as they became available in simulated …