Digital Commons Network^™

Wind Tunnel Test Study On Wind-Resistant Performance Of Shuangliu Yangtze River Bridge, Li Xiukun, Wu Xuewei, Yang Can, Peng Xiaobin, Huang Zhiwen

Journal of China & Foreign Highway

The main bridge of Shuangliu Yangtze River Bridge on the Xingang Expressway in Wuhan City is a single-span suspension bridge with a main span of 1 430 m and a bridge tower of 272.75 m.The stiffening girder is in the form of a closed flat steel box girder with a width of 50.5 m.In order to study the wind-resistant performance of the bridge during operation,the performance of vortex-induced vibration of the girder was tested through wind tunnel tests of section model with two different geometric scales of 1∶60 and 1∶30,respectively.The sensitivity of the vortex-induced vibration response to the structural damping …

Application Of Forward-Ba Ck Ana Lysis And Difference Iteration Method For Solving Initial Cable Tension Of Arch Bridge, Xu Yufeng, Li Zihui, Zhang Zhantao

Journal of China & Foreign Highway

This article presented a method that c ombined the forward-back analysis method and the difference iteration method to solve the initial cable tension according to the state of a built bridge for an arch bridge.Given the known target state of the bridge,a reasonable set of initial cable tensions was determined as the initial value of iteration by the forward-back method.These initial tensions were then applied to the calculation model based on the actual construction process.Through the difference iteration method,the initial cable tensions were optimized.The results show that the method can effectively determine the final cable tension that meets engineering precision …

Experimental Study On Bending And Shear Performance Of Joint With Looped Reinforcement In Prefabricated Components, Liu Zhiquan, Hu Ke, Shi Xuefei, Zhong Yuzhuo

Journal of China & Foreign Highway

A joint with looped reinforcement is a type of steel bar connection structure with wet joints characterized by quick construction.In order to study the bending and shear stress performance and load-bearing capacity characteristics of the wet joints,four bearing capacity tests for bending and shear were designed and conducted for common application scenarios.The load,strain,and displacement changes of the specimens during the test process were tested,and the failure characteristics,load–displacement changes,and ultimate bearing capacity of this type of wet joint were analyzed.The results show that the wet joint with looped reinforcement has good ductility and conforms to the design principles of reinforced concrete.The …

Bending Moment Calculation And Reinforcement Recommendations For Cast-In-Place Cover Slabs In Slab Culverts, Li Yukun, Wan Kecheng, Fu Fulin

Journal of China & Foreign Highway

To address the complexity and lack of practical methods for calculating bending moments of cast-in-place cover slabs in slab culverts,the slabs were simplified as one-way slabs with a pair of opposing edges simply supported and the other pair of edges free.Theoretical formulas for calculating the bending moments within the slabs under uniformly distributed loads were derived using elastic theory.The accuracy of the theoretical formulas was validated through case studies via finite element software.Various combinations of length,width,and fill heights exist in highway projects,making the use of theoretical formulas for bending moment calculations cumbersome.Therefore,a simplified method for calculating maximum bending moments in …

Research On Whole-Hole Testing Technology For Under-Anchor Tension In Prestressed Concrete Girders, Zhu Jianzhao, Dong Hao, Gu Jungang, Feng Lu, Li Shuyang, Zhang Shoulong, Chen Chaung

Journal of China & Foreign Highway

This study aims to propose a new testing method,namely whole-hole back-pull testing technology,to reduce costs and increase efficiency in under-anchor tension testing,effectively addressing the engineering challenges of large testing volume and tight schedules.Based on the principle of the traditional back-pull method,the mechanism of whole-hole back-pull testing technology was explained through theoretical analysis and formula derivation.Technical optimization was carried out in conjunction with experimental research,and a complete application method was proposed.A feasibility analysis was carried out.The study obtained the simplified mechanical model and typical test curves of the whole-hole back-pull testing technology and proposed a formula and application method for determining …

Settlement Mechanism And Re Inforcement Measure For Large-Diameter And Small-Clearance Parallel P Ipe Jacking Undercrossing Complex Building, Tang Gang, Huang Wen Jie, Zhang Wenbo, Li Wenjie, Liang Bin

Journal of China & Foreign Highway

This study aims to study the settlem ent changes and distribution of various parts of a complex building during the construction of a large-diameter and small-clearance parallel pipe jacking undercrossing complex building.On the basis of the pipe jacking project of water quality guarantee engineering 2# for Tiegang –Shiyan Reservoir in Shenzhen,the settlement mechanism of pipe jacking undercrossing construction was analyzed.Through numerical simulation,the influence of the presence or absence of grouting reinforcement,and parameters such as longitudinal spacing and burial depth of pipe jacking on the variation trend and distribution law of building settlement was analyzed.The theoretically predicted values,numerical simulation values,and on-site …

Bridge Damage Detection And Bim Localization Methods Based On Image Recognition, Li Yu, Guo Hongjun

Journal of China & Foreign Highway

To overcome insufficient information of 2D detection data in traditional bridge maintenance,which hinders precise decision-making,this study proposed an automated method based on deep learning and structure from motion (SfM ) technology,which realized the complete process from image recognition to the accurate mapping of damage information in a building information model (BIM ).First,the YOLOv 8 deep learning model was used to automatically detect bridge surface damage.Second,the SfM technology was applied for the local 3D reconstruction of the damage area and to determine the 3D coordinates of the damage.Then,the least squares method was used to align the local coordinate system with the …

Bending Capacity And Strengthening Design With Bonding Steel Plates Of Concrete Sections In French Standards, Wu Zi

Journal of China & Foreign Highway

In the French general technical clauses widely used in Francophone African countries,only the calculation principles for the bending capacity of normal concrete sections are provided,with explicit formulas not listed,and the strengthening design of structures is not involved.According to the fundamental principles of concrete structures and French standard regulations,the calculation formulas for the bending capacity of normal concrete sections were derived.On the basis of the assumptions of strengthening design,calculation formulas for strengthening with bonding steel plates were derived.Through practical engineering calculations conducted on the VDN Expressway project in Senegal,the applicability and reliability of the proposed formulas were verified.This study can offer …

Quantitative Evaluation Of Tunnel Rock Mass Integrity Based On Mwd Technology, Zhang Kunmu, Peng Hao, Liang Ming, Han Yu, Song Guanxian

Journal of China & Foreign Highway

In tunnel construction,the quantitative evaluation of rock mass integrity heavily relies on information from the exposed face,and there are challenges when drilling data is used for integrity evaluation.To this end,this study introduced a novel method for quantitative evaluation of rock mass integrity during drilling,integrating numerical statistics with machine learning.A substantial dataset of digital drilling data was collected,covering three common types of rock mass integrity:relatively intact,relatively fractured,and fractured.Subsequently,a high-performance random forest model for the classification of rock mass integrity was developed through data preprocessing and hyperparameter optimization.The interpretability of the model ’s predictive results was enhanced using Shapley additive explanations (SHAP …

Object Detection And Tracking Based On Fusion Of Radar And Camera On Highway Side, Zeng Yongqiang, Zhang Yonghua, Zhao Hui, Liu Xin, Xu Mingsheng, Shen Jianwei, Hu Zhiwei, Chen Zhenquan

Journal of China & Foreign Highway

Camera is the most widely used sensor in intelligent transportation systems (ITS),but the decline of detection and positioning accuracy caused by target occlusion and external environment interference has always been an important factor restricting the development of ITS.In order to solve this problem,a multi-mode fusion target detection and tracking method based on millimeter-wave radar (MWR ) and camera on highway side was designed.Compared with cameras,high-resolution MWR had better measurement accuracy and weather robustness,serving as a better complement to camera perception.The proposed method used the center point-based radar and camera fusion algorithm for target detection and adopted the greedy algorithm for …

A Decision Support Model For Building Material And Component Reuse In The Context Of Circular Buildings, Havva Aksel

Journal of Sustainable Construction Materials and Technologies

Construction activities cause significant environmental impacts such as waste generation, pollution, resource consumption, and land use, which are expected to increase with global construction demands. To mitigate these environmental problems, the circular building occurs as an emerging concept depending on in the circular economy, which aims to minimize waste and redefine the “end-of-life” concept by reducing, reusing, recycling, and recovering materials. The reuse of building materials and components (BMCs) from existing structures represents a crucial strategy for achieving circularity in the built environment. Within this framework, design plays a key role. However, designing with reclaimed BMCs remains complex due to …

Evaluating Traffic Safety And Geometric Characteristics Using Machine Learning Ensemble Techniques: A Case Study Of Egyptian Rural Multi-Lane Divided Roads, Sania R. Elagamy, Ahmed N. Awaad, Usama E. Shahdah, Sherif M. El-Badawy, Marwa E. Elbany, Eman K. Ali

Mansoura Engineering Journal

Crash prediction models are essential for evaluating traffic safety by analyzing crash occurrence, frequency, or severity. Recently, machine learning techniques have gained prominence in statistical regression modeling and data analysis. This study assesses the effectiveness of machine learning in predicting crashes on Egyptian rural multi-lane divided roads using limited regional data. Supervised machine learning ensemble techniques were applied to predict crash-prone segments (classification) and estimate the total number of crashes per segment (regression). A comparative analysis aims to identify the most suitable method. The Synthetic Minority Oversampling Technique (SMOTE) addressed data imbalance, while K-means Clustering (KC) enhanced regression model accuracy, …

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab

Journal of Materials Exploration and Findings

This study investigates the potential of ceramic membranes derived from areca nut fiber as a cost-effective and environmentally sustainable material for the removal of iron (Fe) and manganese (Mn) from groundwater. Two types of membranes were fabricated: one without activation and one chemically activated using 10% sodium hydroxide (NaOH). The morphological and elemental characteristics of both membranes were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) mapping. The concentrations of Fe and Mn before and after treatment were measured using Atomic Absorption Spectroscopy (AAS). The NaOH-activated membrane exhibited a more porous surface structure and higher oxygen content, …

Quantifying Biocrust Evaporation In Arid Lands By Combining Thermal Imaging And Lysimeter Measurements, Rebekah C. Magness

UNLV Theses, Dissertations, Professional Papers, and Capstones

Biological soil crusts (biocrusts) are miniature ecosystems of living organisms incorporated within the soil matrix and established in the topmost millimeters of the soil surface. Biocrust plays a critical role in the hydrologic processes in arid lands, yet the extent to which it increases or decreases evaporation remains unclear. To gain a better understanding of the impact of biocrust on evaporation compared to bare soil, I studied a cyanobacteria-dominated biocrust patch surrounded by bare soil atop a lysimeter in the Mojave Desert near Las Vegas, Nevada. Using high-resolution thermal imaging, and the known latent heat flux from the lysimeter, I …

Advancing Sustainable Co2 Mitigation: Experimental And Computational Analysis Of Thermal Carbon Chitosan Sorbent For Automotive Exhaust Capture, Dalia A. Ali Dr., Amir Ahmed Elgamal Eng., Rania Rushdy Moussa Dr.

Chemical Engineering

This study investigated the efficiency of thermal carbon chitosan (TCCS) sorbent for CO2 capture from vehicle exhaust emissions within a designed adsorption system. TCCS was synthesized and meticulously characterized using a series of analytical techniques, including Brunauer-Emmett-Teller (BET) surface area analysis, Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Ther- mogravimetric Analysis (TGA), Energy Dispersive X-ray Spectroscopy (EDX), and Differential Scanning Calo- rimetry (DSC). The TCCS adsorbent showed high thermal stability and a heating value (HHV) of 23.5 MJ/kg. Adsorption isotherm study demonstrated that the maximum capacity of CO2 adsorption is 0.084 kg.CO2/kg. TCCS, as well …

Jer-2021 Assistance To The State Water Resources Research Institute Program (Year 1 Of 5) For The 104(B) Program, David Tarboton

Funded Research Records

No abstract provided.

Wg-2413 Remote Sensing Of Wine-Grapevine Transpiration For Improving Vine Water Status, Alfonso Faustino Torres

Funded Research Records

No abstract provided.

Developing A Waste-To-Energy Assessment Framework Integrating Engineering And Policy Dimensions Using A Triple Bottom Line Approach, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The management of municipal solid waste (MSW) in swiftly urbanizing Philippine cities has emerged as a critical concern in both energy and governance. Dependence on landfills is approaching critical thresholds as disposal sites near saturation, transportation costs escalate, and host communities increasingly resist garbage transfers. In response, this study proposes a comprehensive Waste-to-Energy (WtE) assessment framework that integrates engineering evaluation with policy and stakeholder analysis to support sustainable decision- making.

Using Baguio City as a case study, the framework applies a Triple Bottom Line (TBL) approach to evaluate three waste management scenarios: (1) current landfill-dominated practices, (2) engineered landfill with …

Equity-Aware Natural Hazards Resilience Assessment And Improvement Of Road Networks, Naqib Mashrur

LSU Doctoral Dissertations

As climate change intensifies the frequency and severity of hurricanes, the resulting flood events pose escalating threats to transportation infrastructure and community well-being. This dissertation addresses the intersection of flood resilience, network connectivity, and social equity by integrating principles from network analysis, equity planning, and disaster resilience. The research begins by examining the social dimensions of accessibility loss during hurricane-induced flooding. Spatial and demographic analysis reveals that Native American and Hispanic populations in the case study region experience the most significant reductions in access to essential service facilities, highlighting inequities in systems.

Investigating a region southern Louisiana road network demonstrates …

Alkali-Silica Reactivity And Ionic Transport In Mortar With Hydrophobic Inclusions., Isaac Offei

Electronic Theses and Dissertations

Alkali-silica reaction (ASR) causes extensive damage to concrete infrastructure worldwide, with traditional mitigation strategies increasingly constrained by supplementary cementitious material (SCM) supply limitations. This dissertation investigates an innovative approach to ASR prevention through strategic application of hydrophobic materials to modify moisture and ionic transport pathways in cement mortars. The research employed a comprehensive three-objective experimental program using highly reactive aggregates and three hydrophobic materials: hexamethyldisilazane (HMDS)-treated fumed silica, silane-based emulsion, and silane-based crème. The first objective demonstrated the feasibility of hydrophobic aggregate surface modification, achieving 46% and 38% reductions in ASR expansion for washed and non-washed hydrophobic aggregates, respectively. Microstructural …

Toward A Better Understanding Of Friction, Adhesion, And Stud Bearing Shear Transfer At The Steel-Concrete Interface Of Composite Bridge Girders, Callie Grace James

Graduate Theses and Dissertations

Following curing of the concrete deck, load transfer between the concrete and steel components in a composite bridge girder is possible through three mechanisms: 1) mechanical contact (bearing) between the embedded shear connectors and surrounding cured concrete, 2) adhesion between the cured concrete and steel-section top flange, and 3) friction between the contacting materials Understanding the mechanisms of bearing, adhesion, and friction shear transfer at the steel-concrete interface of composite bridge girders is necessary for efficient proportioning of headed shear connectors (or studs) in design. To better understand the roles that stud bearing, adhesion, and friction play in composite girder …

A Comparative Analysis Of Complete Streets And Multimodal Transport Approaches: Implications For Sustainable Urban Mobility In Lincoln, And Global Contexts, Oliva Richard Kilyenyi

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Movement of people and goods in urban areas through different modes of transportation including walking, cycling, public transit and by autos is termed as urban mobility. Urban mobility presents significant environmental, social, and economic challenges for cities worldwide as they grapple with the impacts of conventional transportation systems, particularly in North America context where car-centric planning approaches has dominated urban developments since 1950s. Car-centric dominance is 80% in North American Metropolitan areas (Manaugh et al., 2015). The impacts of these conventional systems include greenhouse gas emission emissions contributing approximately 24% of global carbon dioxide (CO₂) emissions, air pollution …

Advancements In Sinkhole Remediation: Field Data-Driven Sinkhole Grout Volume Prediction Model Via Machine Learning-Based Regression Analysis, Bubryur Kim, Yuvaraj Natarajan, K. R. Sri Preethaa, V. Danushkumar, Ryan Shamet, Jiannan Chen, Rui Xie, Timothy Copeland, Boo Hyun Nam, Jinwoo An

Civil Engineering Faculty Publications

Sinkhole formation poses a significant geohazard in karst regions, where unpredictable subsurface erosion often necessitates costly grouting for stabilization. Accurate estimation of grout volume remains a persistent challenge due to spatial variability, site-specific conditions, and the limitations of traditional empirical methods. This study introduces a novel machine learning-based regression model for grout volume prediction that integrates cone penetration test (CPT)-derived Sinkhole Resistance Ratio (SRR) values, spatial correlations between CPT and grouting points (GPs), and field-recorded grout volumes from six sinkhole sites in Florida. Three data transformation methods, the Proximal Allocation Method (PAM), the Equitable Distribution Method (EDM), and the Threshold-based …

Rainfall-Runoff Modelling In An Indonesian Humid Tropical Area Using Satellite-Based Precipitation Products, Noordiah Helda

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This dissertation explores three rainfall-runoff models in the humid tropical regions of Indonesia using satellite-based precipitation products (SBPPs) and develops integrated machine-learning modeling frameworks. Several ground-based observations from BMKG (Badan Meteorologi, Klimatologi, dan Geofisika (also known as the Indonesian Agency for Meteorology, Climatology, and Geophysics)) stations across Indonesia (133−165 stations) are compared and evaluated against satellite products, indicating that GPM performs well, with R-squared values ranging from 0.54 to 0.76 and correlation coefficients ranging from 0.45 to 0.69, respectively.

In the Martapura Watershed, South Kalimantan, due to a lack of observational discharge data, streamflow was generated using the FJ Mock …

Large-Scale Experimental Study On The Impact Of Air Cleaning & Ventilation On Indoor Air Quality And Student Illness-Related Absenteeism, Daud Nosham

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This large-scale randomized experimental field study investigated the effect of portable air purifiers (PAPs) on classroom’s air quality and student’s illness related absenteeism. PAPs were installed in 317 classrooms from various school districts located in Eastern Nebraska. The classrooms were randomly assigned into four conditions: three treatment conditions (T1, T2 & T3) and one control condition (device without any filter). T1 was equipped with HEPA filters, T2 added Activated Carbon (AC) layer to HEPA, and T3 further integrated Germicidal Ultraviolet (GUV) alongside HEPA and AC filters. The measured variables were carbon dioxide (CO2), fine particles (PN2.5) and coarse particles (PNcoarse), …

Using Hydraulic And Hydrologic Modeling To Determine Scour At Toro Creek Under Climate Change Conditions, Gabriel E. Alaniz

Master's Theses

ABSTRACT

This study evaluates bridge scour at the Toro Creek crossing of Highway 1 in Morro Bay, California, under present conditions and future climate conditions with more frequent extreme rainfall events. California infrastructure is becoming increasingly vulnerable to extreme storm events and increased intense precipitation events brought by climate change. This analysis focuses on the calculation of scour for both the northbound and southbound spans. Highway 1 plays a vital role in California’s coastal transportation infrastructure by carrying more than 20,000 vehicles daily (Caltrans, 2017). In this thesis, a hydrological model (HEC-HMS) is used to simulate runoff under present-day and …

Data-Driven Evaluation Of Sustainable Waste-To-Energy Pathways For Intelligent Urban Systems, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The handling of municipal solid waste (MSW) in swiftly urbanizing Philippine cities poses intricate energy and governance challenges. In Baguio City, reliance on landfills has reached critical levels due to diminishing capacity, rising transport costs, and opposition to trash transfers by nearby LGUs. Although shaped by unique topographical and governance constraints, Baguio’s situation reflects issues faced by other rapidly growing Philippine cities; therefore, analyzing it offers insights for national MSW decision-making. This study applies a triple bottom line (TBL) framework to assess three management scenarios: (1) Status Quo, where all MSW is landfilled with no energy recovery; (2) Landfill with …

Engineering Risk And Indigenous Resilience Toward Intelligent Decision Support For Mining In Ancestral Lands, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

Mining within ancestral territories reveals an ongoing conflict between technical viability and Indigenous consent. This collaborative study, conducted by an engineering scholar and a policy researcher of Indigenous heritage in Benguet among the Ibaloi and Kankanaey peoples, investigates how risk transparency and policy alignment can bridge existing divides, while formulating principles applicable to other Indigenous mining contexts. The study provides an initial evaluation of the feasibility of a proposed large-scale mining operation within a risk-informed, data-driven governance framework. Three elements of engineering risk were assessed utilizing literature-derived and proxy parameters: (1) Land degradation is indicated by a Soil Productivity Index …

Surface Reaction And Transportation Of Radium-226 In Marine Systems, Jiusi Wang

All Dissertations

Historical uses of radium (Ra)-containing self-luminous paint, such as on gauges and dials in naval ships, have led to the potential for such paint, and thus Ra, to be released into the marine environment. Radium-226 (²²⁶Ra) behavior in marine systems is not fully described in the literature, presenting a knowledge gap in the process of evaluating potential ecological impact of Ra in marine systems. This study explores various mechanisms contributing to Ra environmental transport in marine systems on a laboratory scale, including leaching, sorption, and diffusion. ²²⁶Ra leaching from watch hand dials containing radioactive luminous paint is …

Modeling Flood Risks For Small-Scale Coastal Watershed Across Shared Socioeconomic Pathway Scenarios, Sebastian Loschner

Graduate Theses and Dissertations (2019 - present)

Coastal flooding, driven by the mixture of natural processes and human activities such as precipitation, waves, sea level rise, and urbanization, remains a growing concern. While recent flood-risk studies use IPCC's Shared Socioeconomic Pathways with climate projections to assess future flood exposure, smaller coastal watersheds, < 120,000 acres, remain insufficiently studied. Projected sea level rise is expected to intensify these impacts in smaller systems, potentially causing more severe flooding than reported for larger watersheds. To address this gap, this study used the SRH-2D model integrated with Aquaveo's Surface-water Modeling System to simulate flooding in the lower Fish River basin, Alabama. A coastal watershed sensitive to both riverine and tidal influences. Simulations tested different sea levels based on SSP scenarios corresponding to low, moderate, and high emissions for the years 2050 and 2100. Results indicate that the midcentury scenarios remained even in inundation extent and volume, between 9.9-10.4% compared to the 2020 baseline, the latter scenarios had a wider range in results of between 25.9-50.3% compared to the same baseline. Across scenarios, the most vulnerable and inundated areas of the smaller coastal watershed were the narrow points where upstream flow convene with downstream backwater. These findings highlight the need for futuristic location-specific flood mitigation strategies.