Digital Commons Network^™

An Investigation Of The Legitimacy Of The Underlying Assumptions Of The Scs Curve Number Method By Application To Actual Urban Watersheds, Robert K. Peterson

Theses and Dissertations--Civil Engineering

The Soil Conservation Service (SCS) Curve Number (CN) method is widely used to estimate direct runoff, and its TR-55 urban-adapted Curve Numbers are commonly applied in stormwater design. However, the underlying assumptions of the method have been the subject of contemporary review, and concerns remain that these values underestimate runoff in actual urban watersheds. This study evaluates the performance of TR-55 CNs using rainfall–runoff data from twenty real-world urban watersheds in the National Stormwater Quality Database.

Empirical Curve Numbers were derived using two calibration techniques, the asymptotic CN method (CN∞) and a nonlinear least-squares optimization method (CN_LS), and …

Earthquake Wrangler: Leveraging Ios Technology For Earthquake Detection And Early Warning Application To Enhance Public Safety., Luis F. Salome

Theses and Dissertations--Civil Engineering

Earthquakes are devastating natural phenomena and generate secondary hazards such as tsunamis, landslides and fires. Their catastrophic impacts span both developed nations including the United States, Japan, Turkey, and Italy and developing countries such as El Salvador, Haiti, Nepal and the Philippines, where disparities in early warning infrastructure remain important. Seismic events start with stress waves generated by tectonic plate motion, with body waves (P- waves and S-waves) and surface Rayleigh and love waves that carry energy through the earth. While some regions have adopted advanced early warning systems based on seismic hazard models and strong ground motion analysis, others …

Harmful Algal Bloom Prediction Modeling In The Face Of A Changing Climate, Jordan E. Spears

Theses and Dissertations--Civil Engineering

Harmful algal blooms (HABs) in rivers pose significant threats to drinking water quality and public health, yet the predictive understanding of their proliferation remains limited, particularly regarding the influence of flow conditions in large rivers. This thesis addresses the critical knowledge gap of the relationship between seasonal flow variability and HAB proliferation in the Ohio River, with the Markland Pool serving as the primary study site. This study quantified the impact of early summer high flow events (>7500 m³ s^-1) and late summer to early fall low flow conditions (< 1500 m³ s^-1) by integrating …

Development Of Generalizable Data-Driven Traffic State Prediction Solutions: A Comprehensive Approach, Md Mobasshir Rashid

Graduate Thesis and Dissertation post-2024

Increased urbanization and population growth lead to more traffic in the transportation system, causing severe congestion. Particularly during disruptive events such as hurricanes or traffic incidents, the traffic flow in the network worsens significantly. As a result, there is a need for data-driven traffic prediction models to reduce congestion in real-time, and the prediction model should be generalizable to be applicable across different dynamic scenarios. Additionally, a robust and adaptable traffic prediction model can help traffic managers to take proactive actions to optimize traffic flow. However, the majority of data-driven traffic prediction models suffer from limited applicability as they are …

Citizen-Centric Building Energy Retrofits: Understanding And Supporting Citizens As Occupants, Participants, Decision-Makers, And Learners In Home Energy Retrofits, Nikhil Singh Yaduvanshi

Civil Engineering Dissertations - Archive

Residential building retrofits remain significantly under-adopted despite substantial technological advances, economic incentives, and policy efforts, creating a critical gap between technical potential and actual implementation in achieving climate goals. Assessment of citizen involvement in building retrofit processes plays a critical role in formulating effective home retrofit program designs to ensure maximum adoption rates and avoid energy waste. Although, existing retrofit programs and decision-making models recognize the importance of citizen involvement, the extent of citizen capabilities and the effects of citizen-centered approaches on retrofit adoption and building performance has not been comprehensively examined. The adoption and success of retrofit programs depends …

Assessment Of The Feasibility Of Utilizing Plastic Waste In Infrastructure To Promote Circular Economy In Bangladesh, Md Lutfor Rahman

Civil Engineering Dissertations - Archive

This study presents a comprehensive assessment of municipal solid waste (MSW) and plastic waste characterization across Bangladesh, with a focus on circular economy opportunities and the long-term economic viability of plastic road. Using on-site waste characterization data for 13 major cities from four geographic zones of Bangladesh —Northwest, Northeast, Southwest, and Southeast—the research identifies food waste as the dominant component of the national waste stream (67.3%), followed by plastic (12.4%), textiles (7.8%), and paper (4.7%). Among plastics, low-density polyethylene (LDPE) overwhelmingly dominates (89.7%), highlighting the continued prevalence of single-use flexible plastics.

A life cycle cost analysis (LCCA) was conducted comparing …

Implementation And Performance Evaluation Of Plastic Road Mix Design In Parking Lot, Ishraq Faruk

Civil Engineering Dissertations - Archive

The uncontrolled proliferation of plastic waste has emerged as a global environmental crisis, with high-density polyethylene (HDPE) constituting a substantial fraction of the waste stream due to its extensive use in packaging and its resistance to degradation. In parallel, asphalt pavements particularly in urban infrastructure such as parking lots experience accelerated deterioration from raveling, rutting, and cracking as a result of thermal cycling, repetitive loading, and inadequate drainage. These converging challenges present an opportunity for innovative, circular-economy-based sustainable pavement technologies that simultaneously improve surface durability and mitigate plastic waste accumulation.

This research investigates the full-scale implementation and monitoring of HDPE …

Leveraging Product And Process Characteristics Across The Concrete Pavement Life Cycle To Integrate Global Warming Potential Into Project Procurement Processes, Michelle Annette Cooper

Dissertations, Master's Theses and Master's Reports

The objective of this research is to support sustainable procurement of concrete pavements by linking materials-level global warming potential (GWP) to the project-level. Infrastructure owners require reliable environmental product declarations (EPDs) and methodologies for integrating GWP into the procurement process to ensure equitable decision-making. This work provides insights into current EPD reliability by assessing the sensitivity of concrete GWP to materials-level contributors to recommend a level of supply chain specificity needed to effectively communicate GWP. A benchmarking methodology was developed and implemented to establish reference values for procuring sustainable products. Having provided evidence towards EPD reliability, this work presents a …

Life Cycle Assessment And Life Cycle Cost Assessment Of A Floating Treatment Wetland In A Wastewater Lagoon Located In Copper Harbor, Michigan, Erin Browne

Dissertations, Master's Theses and Master's Reports

A full-scale floating treatment wetland was implemented in a wastewater treatment lagoon in Copper Harbor, Michigan. Copper Harbor is a small, rural community located in a cold climate. Many studies have focused on the performance of floating treatment wetlands in mesocosm studies in warmer climates, but there is not a lot of research conducted on the feasibility and performance of full-scale floating treatment wetlands in wastewater lagoons, specifically in cold climates. The 2024 treatment season was the first season with the floating treatment wetland implemented in the wastewater lagoon. A preliminary assessment of the cost and environmental impacts of a …

Enhancing Operational Efficiency Of Paratransit Services Using Predictive Models, Troyee Saha

Civil Engineering Dissertations - Archive

Paratransit services play a vital role in supporting the mobility of older adults and individuals with disabilities, yet they experienced major disruptions during the COVID-19 pandemic and continue to face ongoing operational issues such as trip cancellations. This dissertation explores these challenges through three distinct analyses using data from Arlington, TX. The first chapter investigates how COVID-19-related factors (policies, cases, and vaccination) and socio-demographics influenced paratransit usage from 2019 to 2021. Applying SARIMAX and Poisson regression models, the study finds a substantial drop in ridership—41% in 2020—and a shift toward essential medical travel. It also reveals that restrictive policies, such …

Development Of Supervised Machine Learning-Based Life-Cycle Cost Estimation And Prediction Models For Comparative Sewer System Rehabilitation Using Open-Cut And Trenchless Cured-In-Place Pipe Methods, Gayatri R. Thakre

Civil Engineering Dissertations - Archive

Aging wastewater infrastructure in the United States demands renewal strategies that balance cost-effectiveness, sustainability, and minimal social disruption. Conventional open-cut pipeline installation (OCPI) involves extensive excavation and restoration, whereas trenchless alternatives such as Cured-in-Place Pipe (CIPP) Renewal Technology offer reduced surface disturbance and environmental impacts. However, existing studies primarily focus on Construction Costs (CC), neglecting integrated life-cycle evaluations that also account for Environmental Costs (EC) and Social Costs (SC).

The primary objectives of this research are to develop supervised machine-learning (ML) models to estimate and predict CC in 2025 US dollars (USD) per linear foot of OCPI and CIPP Renewal …

Development Of A Drone-Assisted Pavement Management Framework Based On The Pavement Condition Index For University Parking Lots, Omesh Pasuluru

Civil Engineering Theses - Archive

Efficient pavement management is essential for keeping university parking lots in good condition. At the University of Texas at Arlington, parking areas experience heavy use and environmental wear, which can cause damage if not addressed early. Traditional methods for assessing pavement conditions are time-consuming, interrupt daily activities, and are expensive. Hence, there is a need for better solutions. This study introduces a drone-based pavement management approach that uses the Pavement Condition Index (PCI) system. The PCI is a numerical scale from 0 to 100 that rates pavement quality based on surface condition. A high PCI score (85-100) indicates the pavement …

Structural Performance Of High-Rise Rc Buildings With Sfrc Columns And Shear Walls Subjected To Seismic Loading, Ali Azzawi

Civil Engineering Theses - Archive

To investigate the seismic performance of high-rise RC buildings with steel fiber reinforced concrete (SFRC) columns and shear walls, a detailed numerical analysis was established using RISA-3D software on twelve-story RC buildings subjected to earthquakes. The variables included in this research are steel fiber volume fraction (SFVF), number of stories with SFRC columns and shear walls, and concrete strength grade. The mechanical properties of the concrete for each mix are evaluated experimentally. Three types of concrete mix designs were performed in the Civil Engineering Laboratory Building (CELB) using different dosages of steel fibers (0, 25lb/cy, and 70lb/cy). The properties of …

Investigation Of Aluminum Hollow Shapes Subject To Torsion, Nora Frederick

Honors Theses

This research investigates the torsional strength of hollow aluminum shapes, specifically fairly stocky square and circular cross-sections made from 6061-T6 alloy. A total of six cross-sections were tested, with six specimens for each cross-section, resulting in 36 tests. Torque and angular deformation data were recorded for each specimen to determine the torque corresponding to full- yield of the cross-section. Additionally, Strand7 finite element models were created to simulate the experimental results and assess whether the torsional behavior could be accurately replicated through numerical analysis. This allows for future research to be conducted using Strand7 or similar finite element software.

The …

In-Plane Shear Stiffness Of Stay-In-Place Forms And Bracing Effects On The Torsional Stability Of Press-Brake-Formed Tub Girders, Ethan L. Host

Graduate Theses, Dissertations, and Problem Reports (ETD)

Press-brake-formed tub girders have welded internal angle bracing that is believed to be necessary for torsional stability under eccentric loading. However, this bracing creates fatigue weld hotspots overtime, which are subject to cracking. This study was performed to assess the torsional behavior of the Valmont U12 press-brake-formed tub girder (PBFTG) under various configurations using finite element analysis (FEA) modeling and experimental laboratory testing. The primary objective was to (1) determine the necessity of various angle bracing throughout the beam, and the effects removing said braces has on the torsional stiffness of the girder and (2) investigate the use of stay-in-place …

Performance And Economic Evaluation Of Asphalt-Based High Friction Surface Treatment (Hfst) Applications, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High Friction Surface Treatments (HFSTs) are recognized for enhancing friction between tires and road surfaces, with reduced road accidents being a key benefit. Epoxy-based HFSTs, though widely used, come with challenges like compatibility issues with existing pavements, higher installation and removal costs, and reduced durability tied to substrate quality. Recently, state agencies have increasingly focused on developing asphalt-based alternative binders for HFST applications as highlighted in the National Cooperative Highway Research Program (NCHRP) RFP #NCHRP 10-145. This study introduces asphalt-based HFSTs as an alternative to traditional epoxy-based treatments. Various aggregate types were examined for friction performance and the effect of …

Mitigation Of Antibiotic Resistance Using Ultraviolet Light-Emitting Diodes For Water Treatment, Nicole Heyniger, Patrick J. Mcnamara, Anthony D. Kappell, Brandon Schultz, Troy Skwor, Brooke K. Mayer

Civil and Environmental Engineering Faculty Research and Publications

The presence of antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) in the environment is a growing issue, which has been exacerbated by the overuse and misuse of antibiotics in health care and agricultural systems. One means of mitigating antibiotic resistance is through drinking water and wastewater treatment, specifically during disinfection processes. Ultraviolet light-emitting diodes (UV-LEDs) are an emerging disinfection technology featuring adjustable peak wavelength emissions. We assessed the use of UV-LED for treating waterborne ARB (Escherichia coli and Aeromonas hydrophila) and ARGs (intracellular and extracellular) compared to conventional low-pressure UV (LP-UV). Overall, less efficient reduction (bacterial inactivation and/or gene …

Quantifying Subsurface Pavement Temperatures Subject To Future Climates And Implications For Pavement Resilience, Austin Michael Jarrell

Graduate Theses, Dissertations, and Problem Reports (ETD)

Assessment of anthropogenic climate change impacts in pavement design and analysis remains limited within engineering practice, despite growing recognition of the need for climate-resilient roadway infrastructure. Research efforts have increasingly focused on integrating future climate projections into mechanistic-empirical pavement design, which represents the leading edge of the state of practice. However, a lack of consensus persists regarding the optimal methods for incorporating climate projections, particularly in the selection of downscaling techniques and global climate models (GCMs) to ensure accuracy and applicability for pavement performance analysis. This research investigates the impact of statistical downscaling methodologies and GCM selection routines on subsurface …

Framework To Guide The Review And Update Of Wvdoh Schedule Review Practices And Specifications, Myles Joshua Avery

Graduate Theses, Dissertations, and Problem Reports (ETD)

Roadway and bridge construction projects are often complex, necessitating high quality schedules to ensure the work is completed on time and within budget. The West Virginia Division of Highways (WVDOH) utilizes scheduling procedures and policies outlined within the Prosecution and Progress section of its Standard Specifications for Roads and Bridges to ensure timely and cost-effective project deliveries. Recently, concern has risen that the existing language within this section is outdated and fails to cater to modern scheduling techniques, technologies, and industry practices. In turn, WVDOH personnel question whether schedules that follow the existing specifications align with the complexities, types, values, …

The Impact Of Skew On The Flexural Behavior Of Press-Brake-Formed Tub Girders, Matthew Allan Weatherholt

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Short Span Steel Bridge Alliance (SSSBA) is a group of bridge and buried soil steel structure industry leaders who have joined together to provide educational information on the design and construction of short span steel bridges in installations up to 140 feet in length. Press-brake-formed-tub-girders (PBFTGs) were developed by a technical working group within the SSSBA in response to a rising demand for rapid infrastructure replacements for short span bridge applications. PBFTGs are produced from structural steel plate and can be finished as weathering steel or galvanized. After being cold bent to the appropriate shape, shear studs are welded …

A Durability Evaluation Of Class B Concrete Bridge Substructures Under West Virginia Freeze–Thaw Conditions, Nathaniel Wayne Dunbar

Graduate Theses, Dissertations, and Problem Reports (ETD)

This study evaluates whether the West Virginia Division of Highways (WVDOH) Class B concrete specification for bridge substructures remains adequate under modern durability and design-life expectations. The current specification, which permits a minimum compressive strength of 3,000 psi, reflects practices established when shorter service lives were generally assumed. Modern AASHTO LRFD provisions are based on a 75-year design life, raising concern that this lower-strength concrete may not provide sufficient durability under West Virginia’s climatic conditions.

To address this issue, bridge inspection data, regional climate mapping, and durability modeling were used to assess the condition and performance of concrete substructures across …

Software Literacy In Construction, Aidan Cazares

Williams Honors College, Honors Research Projects

The construction industry increasingly relies on software like Bluebeam Revu for their quantity takeoff, document management, and collaboration needs. This project will outline pertinent information obtained through their Bluebeam professional training program and reflect it with a detailed estimate of a real life construct project.

Structural Analysis And Design Methodologies Of Roller Coasters, Benjamin Komar

Williams Honors College, Honors Research Projects

This project explores the structural analysis behind the design of roller coaster tracks and supports as practiced by modern engineers. It also examines various roller coaster design methods currently in use. This research will be used to craft a detailed explanation of the roller coaster design process. Additionally, a 3D model of a roller coaster was developed based on the researched design procedures, featuring three track sections with different loading conditions to create a supporting structure for 2D truss analysis. The results of the truss analysis were then compared to those obtained using RISA-3D, a finite element structural design software.

Experimental And Simulation Of Compression After Impact (Cai) Tests For Thermoplastic Composite Materials, M. M. Shahzamanian, Sydney Houck, Li Ai, Md Mushfiqur Rahman Fahim, Sourav Banerjee, Wout De Backer, Paul Ziehl

Civil Engineering Faculty Publications

Damage caused by low velocity impacts in composite materials may go undetected, resulting in significant damage being unnoticeable. This phenomenon has been studied using experiments and simulations on a typical composite material, Toray T1225 LM-PAEK UD Tape, following impacts with varying energy levels. To the authors’ knowledge, there is a lack of information on thermoplastics and compression after impact (CAI) in the publicly available literature, and there have been insufficient results and discussions regarding CAI tests on thermoplastic composite materials at the relatively high levels of impact used, especially with the rise in the use of thermoplastic materials for the …

Drone-Based Multimodal Sensing On Vegetations And Data Analytics For Early Detection Of Gas Leakage From Underground Pipelines, Pengfei Ma

Doctoral Dissertations

"This study explored the feasibility of using multimodal remote sensors in the early detection of natural gas leaks from underground pipelines, as vegetation situated above pipelines can discern microbial changes in soil when affected by gas and exhibit physiological stress symptoms on leaves. Three sensors (RBG, thermal, and hyperspectral cameras) were utilized to monitor vegetation stress as an indicator of gas leaks. A laboratory experiment was conducted to evaluate the workability of vegetation for gas leak detection. Regular hyperspectral imagery was collected from test vegetations to identify gas stress and distinguish it from other environmental stressors such as salinity impact, …

Flexural Post-Cracking Performance Of Macro Synthetic Fiber Reinforced Super Workable Concrete Influenced By Shrinkage-Reducing Admixture, Jingjie Wei, Nima Farzadnia, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Most literature has focused on the effect of shrinkage-reducing admixture (SRA) in shrinkage mitigation resistance of concrete. This study aims to examine the impact of SRA on the efficiency of macro synthetic fibers (MSF) in enhancing the flexural post-cracking behavior of fiber-reinforced super workable concrete (FR-SWC). A comparative analysis of the influence of fiber combinations on the flexural post-cracking behavior of beams is also included. Results showed that a higher dosage of SRA, particularly at 5 % by mass of binder, had a noticeable negative impact on flexural post-cracking performance of beams while exhibiting positive effect on workability and shrinkage …

Class-Wise Histogram Matching-Based Domain Adaptation In Deep Learning-Based Bridge Element Segmentation, Tarutal Ghosh Mondal, Zhenhua Shi, Haibin Zhang, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study focused on the problem of domain shift in deep learning-based bridge element segmentation. The impracticability of accounting for all possible variabilities vis-à-vis structural shape, size, color, texture, illumination, and other operational conditions in the training process leads to the deterioration in the model performance when applied to test data from novel unseen domains. In such situations, rebuilding the model with labeled training data from the target domain becomes prohibitively expensive and time-consuming in many practical cases. Recent advancements in unsupervised domain adaptation techniques are known to provide viable solutions to this problem. However, it was observed in this …

Effect Of Gluconate Molecules On The Reaction Kinetics Of C-(N)-A-S-H And N-A-S-H Gel Formation, Jiafeng Kong, Chao Sun, Zuhua Zhang, Chenglong Cai, Yubin Cao, Yanru Wang, Hongyan Ma, Xuesen Zeng, Hao Wang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Organic ligands are widely used to regulate setting in cementitious binders, yet their chemistry-selective action in geopolymers (GPs) remains unclear. Here we isolate the role of sodium gluconate (SG) in early reaction kinetics across a Ca-rich GP that forms a calcium-(sodium)-aluminosilicate hydrate (C-(N)-A-S-H) gel and a Ca-poor GP that forms a sodium-aluminosilicate hydrate (N-A-S-H) gel. Four GPs spanning Ca/Si ≈ 1.01 to 0.01 were prepared with identical activator chemistry and dosages of SG up to 5 wt.% of precursors. Setting time, isothermal calorimetry, pore-solution speciation (TOC, ICP-OES, and pH), selective dissolution (reaction extent), low-field¹H NMR, XRD, FTIR, SEM-EDS, …

Influence Of Deck Area And Average Daily Traffic On The Deterioration Of Bridge Superstructures., Faysal Ahamed

Graduate Theses, Dissertations, and Problem Reports (ETD)

State Departments of Transportation (DOTs) are responsible for maintaining approximately 623,000 bridges across the United States. Effective bridge management requires a comprehensive understanding of the factors influencing structural deterioration. Numerous studies have explored the effects of average daily traffic (ADT) and deck area (DA) on bridge deck deterioration. Given the interdependence between bridge decks and superstructures, it is plausible that ADT and DA significantly influence superstructure condition ratings and deterioration trends. However, their impact on superstructures remains insufficiently studied. In addition, existing studies primarily focus on overall bridge deterioration without adequately differentiating between superstructure designs and materials and maintenance authorities. …

Artificial Intelligence’S Role And Impact On The Engineering Discipline, Andrew Angelini

Williams Honors College, Honors Research Projects

The purpose of this Honors Research project was to explore the impact of Artificial Intelligence (AI) on the Engineering Discipline as a whole. Specifically, civil engineering’s discipline of transportation was used to display the effectiveness of AI in engineering. This discipline was used due to its wide use in engineering and overall designs that can be created within this discipline. These designs include maintenance of traffic plans, engineering plan sets, horizontal and vertical curve design, intersection design, traffic signaling, highway material design, and phasing of intersections and traffic accounting for pedestrians. Through similar prompts that were given to a publicly …