Digital Commons Network^™

Mechanical, Durability, And Environmental Performance Of Limestone Powder-Modified Ultra-High-Performance Concrete, Yashovardhan Sharma, Meghana Yeluri, Srinivas Allena

Civil and Environmental Engineering Faculty Publications

Ultra-high-performance concrete (UHPC) delivers outstanding durability and strength but typically relies on high Portland cement content. This study evaluates a 20% cement replacement with limestone powder (LP) in UHPC and benchmarks performance under two curing regimes: moist curing (MC) and warm bath curing at 90 degrees C (WB). Metrics include workability, compressive and flexural behavior, shrinkage, freeze-thaw resistance, chloride transport (surface resistivity, RCPT), material cost, and embodied CO2. LP improved fresh behavior: flow increased by 14.3% in plain UHPC and 33% in fiber-reinforced UHPC (FR-UHPC). Compressive strengths remained in the UHPC range at 28-56 days (approximately 142-152 MPa with LP), …

Analytical Assessment Of Pedestrian Crashes On Low-Speed Corridors, Therezia Matongo, Deo Chimba

Civil and Architectural Engineering Faculty Research

This study presents a comprehensive statewide analysis of pedestrian-involved crashes recorded in Tennessee between 2002 and 2025. We evaluated the influence of roadway, traffic, environmental, and socioeconomic factors on pedestrian crash frequency and severity with substantial components focused on lighting impacts including dark and nighttime. A multi-method analytical framework was implemented, combining descriptive statistics, non-parametric tests, regression analysis, and advanced machine learning techniques including the Adaptive Neuro-Fuzzy Inference System (ANFIS) and the gradient boosting model (XGBoost). Results indicated that dark and nighttime conditions accounted for a disproportionate share of severe crashes—fatal and serious injuries under dark conditions reached over 40%, …

Equity-Aware Natural Hazards Resilience Assessment And Improvement Of Road Networks, Naqib Mashrur

LSU Doctoral Dissertations

As climate change intensifies the frequency and severity of hurricanes, the resulting flood events pose escalating threats to transportation infrastructure and community well-being. This dissertation addresses the intersection of flood resilience, network connectivity, and social equity by integrating principles from network analysis, equity planning, and disaster resilience. The research begins by examining the social dimensions of accessibility loss during hurricane-induced flooding. Spatial and demographic analysis reveals that Native American and Hispanic populations in the case study region experience the most significant reductions in access to essential service facilities, highlighting inequities in systems.

Investigating a region southern Louisiana road network demonstrates …

Evaluating Use Of Multiple Hydrologic Storage Indicators To Enhance Streamflow Forecasting, Reza Morovati

All Graduate Theses and Dissertations, Fall 2023 to Present

Accurate seasonal streamflow forecasts are essential for managing water resources in the western United States, where much of the water supply depends on snow accumulation and melt. Water managers, farmers, and communities rely on these forecasts to plan for water use, prepare for droughts, and protect the environment. However, traditional forecasting methods often do not fully use all the available information about how water is stored in the landscape, such as in snowpacks, soil moisture, and groundwater. This can limit the accuracy of predictions and make water management more difficult.

This study aimed to improve streamflow forecasts by explicitly including …

The Equity Implications Of Pecuniary Externalities On An Electric Grid, Charles Sims, Gasser G. Ali, J Scott Holladay, Tim Roberson, Chien-Fei Chen, Islam H. El-Haddad

Civil Engineering Faculty Publications

The adoption of rooftop photovoltaic (PV) systems can create upward pressure on retail electricity rates as utilities are forced to spread their fixed costs of generation and transmission across a smaller customer base. Since high-income households are more likely to purchase PV systems, low-income households may be disproportionately impacted by these rate increases. Using a novel combination of agent-based computational economic modeling and a choice experiment of rooftop solar adoption, we show how this pecuniary externality between low- and high-income customers increases low-income electricity bills by 10% in an area with some of the highest poverty rates in the United …

Depth-Averaged Two-Dimensional Hydrodynamic Modeling In Headwater Channel And Floodplain Design., Jesse Dylan Robinson

Electronic Theses and Dissertations

In the channels and floodplains of inland waterways the hydrodynamic forces of floods destroy property and infrastructure, threaten lives, and damage aquatic habitat. Flood simulations using robust and efficient depth-averaged two-dimensional hydrodynamic models (2D models) can be interpreted to design effective solutions for areas vulnerable to damage. The reliable interpretation of 2D models for use in design is improved here through direct comparison of 2D model output to observed flood events at 6 headwater research sites. Instrumentation was used for model calibration and to define the surface hydrodynamics at sites with confined flows, wide and shallow flows, at vertical steps, …

Alkali-Silica Reactivity And Ionic Transport In Mortar With Hydrophobic Inclusions., Isaac Offei

Electronic Theses and Dissertations

Alkali-silica reaction (ASR) causes extensive damage to concrete infrastructure worldwide, with traditional mitigation strategies increasingly constrained by supplementary cementitious material (SCM) supply limitations. This dissertation investigates an innovative approach to ASR prevention through strategic application of hydrophobic materials to modify moisture and ionic transport pathways in cement mortars. The research employed a comprehensive three-objective experimental program using highly reactive aggregates and three hydrophobic materials: hexamethyldisilazane (HMDS)-treated fumed silica, silane-based emulsion, and silane-based crème. The first objective demonstrated the feasibility of hydrophobic aggregate surface modification, achieving 46% and 38% reductions in ASR expansion for washed and non-washed hydrophobic aggregates, respectively. Microstructural …

Steel-Concrete Composite Girder Experiments To Isolate Interface Load Transfer Effects On Stud Fatigue Life, Marc Crespi Hromcova

Graduate Theses and Dissertations

Metal fatigue resulting from repeated loading is a primary limit state that affects the quantity of headed shear studs required in the composite design of steel bridge girders. While concrete-deck-to-steel-superstructure load transfer is only considered through stud bearing in the American Association of State Highway Transportation Officials (AASHTO) design standards, friction and interface interlocking effects may also contribute. This study aims to experimentally quantify the effect of interface conditions on the fatigue life of headed studs within composite girders. In this study, two full-scale composite girder specimens having the same geometry and material properties are tested with two interface conditions. …

Optimizing Indigenous Timber Short-Gap Crossing Designs By Minimizing Wood Moisture Content, Robert Greenwood

Graduate Theses and Dissertations

Reducing moisture content increases wood strength and reduces the weight of timber members. An accurate and efficient method for measuring moisture content is important for the design and construction of indigenous timber short-gap crossings. This study evaluates different methods for measuring moisture content in timber, describes a methodology for developing a representative moisture content value for a timber log, and approaches for quickly drying large timber logs. The results of this thesis will support activities in developing a representative moisture content of a log for structural design purposes and reducing weight for constructability purposes. The approaches discussed were developed considering …

Toward A Better Understanding Of Friction, Adhesion, And Stud Bearing Shear Transfer At The Steel-Concrete Interface Of Composite Bridge Girders, Callie Grace James

Graduate Theses and Dissertations

Following curing of the concrete deck, load transfer between the concrete and steel components in a composite bridge girder is possible through three mechanisms: 1) mechanical contact (bearing) between the embedded shear connectors and surrounding cured concrete, 2) adhesion between the cured concrete and steel-section top flange, and 3) friction between the contacting materials Understanding the mechanisms of bearing, adhesion, and friction shear transfer at the steel-concrete interface of composite bridge girders is necessary for efficient proportioning of headed shear connectors (or studs) in design. To better understand the roles that stud bearing, adhesion, and friction play in composite girder …

Investigation Of Hot Mix Asphalt Aging Effect On Binder Performance, Zahra Mohajeri

Open Access Theses & Dissertations

Asphalt roads continuously experience physicochemical changes under the combined influence of oxygen, heat, ultraviolet (UV) radiation, and water. Oxidation increases molecular polarity and association, causes maltenes loss, and continues hardening the asphalt binder, reducing ductility, stress-relaxation capacity, and resistance to cracking (Petersen 1982; Colbert and You 2012). Because aging is a cumulative process beginning at plant production, accelerating during construction/compacting, and continuing in service, the laboratory tests and indices must capture the extent of short-and long-term aging to support performance-related specification and Balanced Mix Design (BMD) (AASHTO R30 2022; Kim et al. 2017). This chapter reviews: (i) laboratory and field-representative …

Rapid Construction Of Short Gap Crossings Using Indigenous Timber, Jack Everett Hamburger

Graduate Theses and Dissertations

This thesis examines multiple design options for constructing short span crossings for the military using indigenous timbers. Using indigenous timbers allows for a significant reduction in resources that must be brought into a site for construction. Construction time is minimized by optimizing the steps to convert indigenous timber into structural members for use as timbers in a short gap crossing. A major objective during this thesis study was to examine approaches for maximizing timber strength for design purposes and reduce timber weight for handling purposes. Wood strength and wood weight are highly dependent on moisture content. Decreasing moisture content addresses …

A Comparative Analysis Of Complete Streets And Multimodal Transport Approaches: Implications For Sustainable Urban Mobility In Lincoln, And Global Contexts, Oliva Richard Kilyenyi

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Movement of people and goods in urban areas through different modes of transportation including walking, cycling, public transit and by autos is termed as urban mobility. Urban mobility presents significant environmental, social, and economic challenges for cities worldwide as they grapple with the impacts of conventional transportation systems, particularly in North America context where car-centric planning approaches has dominated urban developments since 1950s. Car-centric dominance is 80% in North American Metropolitan areas (Manaugh et al., 2015). The impacts of these conventional systems include greenhouse gas emission emissions contributing approximately 24% of global carbon dioxide (CO₂) emissions, air pollution …

Impact Of Equipment Type On Measured Particle Size Of Civil Engineering Materials, Tanner Turben, Tasnimul R. Ferdous, Andrew Braham, Wen Zhang

Civil Engineering Faculty Publications and Presentations

Particle size analysis (PSA) captures the size distribution of finely graded materials with particles generally smaller than 1000 microns. Many civil engineering materials do not leverage PSA for material specifications or acceptance despite the insight into material performance and quality gained through understanding the particle size. The objectives of this study are to compare PSA measurement principles by testing 13 civil engineering materials by laser diffraction, Coulter counter, and microscopy. Asphalt emulsions, cementitious materials, sands, clays, and biological samples were selected to represent a wide set of interests and shapes. It was found that between laser diffraction and Coulter counter …

Rainfall-Runoff Modelling In An Indonesian Humid Tropical Area Using Satellite-Based Precipitation Products, Noordiah Helda

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This dissertation explores three rainfall-runoff models in the humid tropical regions of Indonesia using satellite-based precipitation products (SBPPs) and develops integrated machine-learning modeling frameworks. Several ground-based observations from BMKG (Badan Meteorologi, Klimatologi, dan Geofisika (also known as the Indonesian Agency for Meteorology, Climatology, and Geophysics)) stations across Indonesia (133−165 stations) are compared and evaluated against satellite products, indicating that GPM performs well, with R-squared values ranging from 0.54 to 0.76 and correlation coefficients ranging from 0.45 to 0.69, respectively.

In the Martapura Watershed, South Kalimantan, due to a lack of observational discharge data, streamflow was generated using the FJ Mock …

Intrinsic Disinfection Byproducts In Free Chlorine And Chloramine Systems: Formation Of Chlorite, Chlorate, Perchlorate, And Chloronitramide Anion, Julian L. Fairey, Ashley D. Pifer, David G. Wahman

Civil Engineering Faculty Publications and Presentations

Intrinsic disinfection byproducts are formed by reactions between disinfectant species and/or their decomposition products. In this review, we focus on a subset that accumulates in free chlorine and chloramine drinking water systems. First, we review the sequential formation of chlorite, chlorate, and perchlorate in hypochlorite feedstocks. Model simulations indicate chlorate and perchlorate can accumulate under realistic dosing conditions and can be managed with less concentrated feedstocks and climate-controlled storage. Second, we review the formation pathways of dichloramine and chloronitramide anion. Chloronitramide anion accumulation may be mitigated by increasing monochloramine stability and quenching reactive nitrogen species in its formation pathway.

Using Hydraulic And Hydrologic Modeling To Determine Scour At Toro Creek Under Climate Change Conditions, Gabriel E. Alaniz

Master's Theses

ABSTRACT

This study evaluates bridge scour at the Toro Creek crossing of Highway 1 in Morro Bay, California, under present conditions and future climate conditions with more frequent extreme rainfall events. California infrastructure is becoming increasingly vulnerable to extreme storm events and increased intense precipitation events brought by climate change. This analysis focuses on the calculation of scour for both the northbound and southbound spans. Highway 1 plays a vital role in California’s coastal transportation infrastructure by carrying more than 20,000 vehicles daily (Caltrans, 2017). In this thesis, a hydrological model (HEC-HMS) is used to simulate runoff under present-day and …

Development Of A Handy Tool For The Selection Of Urban Stormwater Best Management Practices, Aaron T. Kenny

Civil & Environmental Engineering Theses & Dissertations

The City of Norfolk, Virginia faces substantial stormwater management challenges due to shallow groundwater, tidal influence, dense urban development, and limited right-of-way. These constraints limit the applicability of many Best Management Practices (BMPs) and require the early identification of feasible practices before detailed hydrologic modeling. This thesis introduces a decision-support tool that quickly and systematically identifies and prioritizes BMPs that are both feasible and well-suited to Norfolk’s Municipal Separate Storm Sewer System (MS4) program, streamlining early-stage selection and saving time and resources.

The tool implements a two-stage methodology. First, feasibility gates are applied using catalog attributes derived from the Virginia …

Identifying Influential Assets In Higher Order Interdependent Infrastructure Networks Through Population Impact, Akshat Chulahwat, Emad M. Hassan, Mersedeh Tariverdi, Miguel Nunez-Del-Prado, Hussam Mahmoud

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A significant increase in catastrophic events worldwide has had a disastrous impact on the built environment, as these disruptive events devastate critical infrastructure lifelines, resulting in a substantial reduction of services across a community. Management of critical infrastructure assets is essential, and this can be achieved by optimal resource allocation to key assets within interconnected systems. The majority of current literature focuses on capturing the behavior of infrastructure systems individually, which presents a computational problem when dealing with complex, interdependent infrastructure systems. In this study, a comprehensive framework to evaluate a type of influence metric for ranking node and edge …

Evaluating Crumb Rubber Modified (Crm) Asphalt As A Sustainable Binder Alternative For High-Friction Surface Treatments, Abdallah Aboelela, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High-friction surface treatments (HFSTs) are widely applied to improve pavement safety by enhancing long-term skid resistance. Although epoxy resins are commonly used due to their strength and durability, their high cost, susceptibility to delamination, incompatibility with substrates of flexible pavements, and adverse environmental concerns limit their long-term performance. This study presents crumb rubber modified (CRM) asphalt as a sustainable alternative binder for HFST applications. CRM binders offer high performance and compatibility with existing pavement surfaces, cost effectiveness and reduced environmental impacts as compared to epoxy binders. In addition, the binder development utilizes enhanced recycling technologies for interacting with used tire …

Piezoelectric Energy Harvesting From Roadways: Challenges, Advances, And Future Directions, Heba Mohamed Gaber, Mohamed Abdel-Raheem

Civil Engineering Faculty Publications

As the global demand for renewable energy intensifies, piezoelectric energy harvesting from roadways has emerged as a promising avenue for sustainable power generation. This systematic literature review analyzes 61 peer-reviewed studies to assess the feasibility, performance, and potential of integrating piezoelectric systems into roadway infrastructure. While technology faces challenges, such as high installation costs, limited energy output, and a scarcity of thorough economic evaluations, findings suggest it holds considerable promise as a supplementary renewable energy source. The review analyzes the operational characteristics and efficiencies of various piezoelectric transducers, identifies key factors influencing system performance, and evaluates recent technological advances. It …

Advancements In Sinkhole Remediation: Field Data-Driven Sinkhole Grout Volume Prediction Model Via Machine Learning-Based Regression Analysis, Bubryur Kim, Yuvaraj Natarajan, K. R. Sri Preethaa, V. Danushkumar, Ryan Shamet, Jiannan Chen, Rui Xie, Timothy Copeland, Boo Hyun Nam, Jinwoo An

Civil Engineering Faculty Publications

Sinkhole formation poses a significant geohazard in karst regions, where unpredictable subsurface erosion often necessitates costly grouting for stabilization. Accurate estimation of grout volume remains a persistent challenge due to spatial variability, site-specific conditions, and the limitations of traditional empirical methods. This study introduces a novel machine learning-based regression model for grout volume prediction that integrates cone penetration test (CPT)-derived Sinkhole Resistance Ratio (SRR) values, spatial correlations between CPT and grouting points (GPs), and field-recorded grout volumes from six sinkhole sites in Florida. Three data transformation methods, the Proximal Allocation Method (PAM), the Equitable Distribution Method (EDM), and the Threshold-based …

Friction And Texture Evaluation Of Asphalt-Based Binders As Alternatives To Epoxy-Based High-Friction Surface Treatments, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High-friction surface treatment (HFST) is a safety-focused pavement treatment that restores and maintains pavement friction to reduce road accidents. Traditional epoxy-based HFSTs, while widely used, face challenges such as high costs, potential compatibility issues with the substrate pavement, and long-term durability under specific conditions. This study investigates asphalt-based alternative HFST, which is compatible with various pavement types and cost-effective and versatile solutions for a wider range of pavement applications. Performance and friction testing, including the British pendulum test, British wheel test, and dynamic friction test, were performed to examine the coefficient of friction (COF) before and after polishing with a …

Analysis Of Progressive Failure From Hydrofracturing Tests In Boise Sandstone, Alejandra Sanchez Arizmendi

Boise State University Theses and Dissertations

Sealed borehole laboratory hydrofracturing tests with acoustic emission monitoring were used to investigate the acoustic emission activity, damage thresholds, progressive failure, and tensile strength as a function of injection rate for twenty Boise Sandstone specimens. Four injection rates 15.7, 31.4, 62.8, and 125.6 mL/minute were used in the testing.

Increasing the injection rate initially increased and then decreased acoustic emission activity. The highest injection rate resulted in the lowest number of AE hits. The acoustic emission data was collected via two ultrasonic sensors. The highest average AE hits at the 31.4 mL/min injection rate was 613 and the lowest average …

A Machine Learning Approach To Estimating Agricultural Return Flows: A Case Study Of The Twin Falls Canal Company In Idaho, Kendra Alise Figgins

Boise State University Theses and Dissertations

Idaho is the third largest water user in the United States due to its extensive agriculture industry (Murray, 2018). Irrigation has allowed farmers to take advantage of the warm climate and rich soils of the Eastern Snake River Plain to develop one of the nation’s most productive agricultural regions. This area now contains one-third of Idaho’s irrigated acres (Idaho Department of Water Resources, 2024). It also contains critical hydrologic connections between the Snake River and the Eastern Snake Plain Aquifer.

Farming practices in Idaho have gradually shifted over time. Warming temperatures and increased irrigation efficiency are allowing an expansion of …

Sustainability Assessment Of Ground Improvement Techniques: A Life Cycle Analysis Of Lime, Cement, Geopolymers And Biopolymers For Roadway Application, Jillian R. Frost

Boise State University Theses and Dissertations

Ground improvement design (GID) is a vital part of constructing safe, long-lasting infrastructure. Traditionally, this is done with a chemical additive such as lime or cement that is mixed with in-situ soil to improve soil parameters such as compressibility, and strength. These stabilizers produce high amounts of carbon emissions. As a response, engineers and researchers are beginning to develop new stabilization methods using biopolymers and geopolymers in hopes of achieving comparable soil stability results as well as reduced environmental impacts.

This thesis work integrates a life-cycle analysis (LCA) and life-cycle-cost-analysis (LCCA) framework to evaluate and compare four soil stabilizer types: …

The Effect Of Loading Conditions And Specimen Size On The Tensile Strength Of Ring-Shaped Specimens, Kolby Scott Mcclure

Boise State University Theses and Dissertations

This study introduces a custom-built direct tension testing apparatus designed for ring-shaped rock specimens. The apparatus applies a uniform axial load to the inner surface of the ring and is compatible with standard geotechnical testing equipment. Using this device, 176 granite specimens sourced from Horseshoe Bend, Idaho, were tested under three configurations: Brazilian, indirect ring tension, and direct ring tension. Only specimens exhibiting valid diametrical splitting failure modes (126 out of 176) were included in the final analysis. Direct tension tests yielded the lowest tensile strengths, followed by Brazilian tests, with indirect tension tests producing the highest values. While scatter …

Feasibility Of Small-Modular Reactors In Hybrid Energy Systems, Taylor Reid

Boise State University Theses and Dissertations

This thesis evaluates the feasibility of integrating next-generation nuclear technology into hybrid energy systems, framing the analysis within the guidelines suggested by the World Energy Council’s, Energy Trilemma. The trilemma seeks to balance energy security, economics/equity and sustainability. To this end, a computer model was created to illustrate how the limitations of intermittent renewables, like wind and solar (PV), can be addressed when they are combined with a baseload provided by a next-generation nuclear Small Modular Reactor (SMR). The baseload power provided by nuclear energy can smooth the variability of wind or solar power, while simultaneously offsetting the cost of …

Building Services Engineering November/December 2025

Building Services Engineering

No abstract provided.

Modeling Flood Risks For Small-Scale Coastal Watershed Across Shared Socioeconomic Pathway Scenarios, Sebastian Loschner

Graduate Theses and Dissertations (2019 - present)

Coastal flooding, driven by the mixture of natural processes and human activities such as precipitation, waves, sea level rise, and urbanization, remains a growing concern. While recent flood-risk studies use IPCC's Shared Socioeconomic Pathways with climate projections to assess future flood exposure, smaller coastal watersheds, < 120,000 acres, remain insufficiently studied. Projected sea level rise is expected to intensify these impacts in smaller systems, potentially causing more severe flooding than reported for larger watersheds. To address this gap, this study used the SRH-2D model integrated with Aquaveo's Surface-water Modeling System to simulate flooding in the lower Fish River basin, Alabama. A coastal watershed sensitive to both riverine and tidal influences. Simulations tested different sea levels based on SSP scenarios corresponding to low, moderate, and high emissions for the years 2050 and 2100. Results indicate that the midcentury scenarios remained even in inundation extent and volume, between 9.9-10.4% compared to the 2020 baseline, the latter scenarios had a wider range in results of between 25.9-50.3% compared to the same baseline. Across scenarios, the most vulnerable and inundated areas of the smaller coastal watershed were the narrow points where upstream flow convene with downstream backwater. These findings highlight the need for futuristic location-specific flood mitigation strategies.