Digital Commons Network^™

Bottom-Up Mechanochemical Synthesis Of Nanographene, Sarah Kerr

Honors Theses

This research explores the application of mechanochemistry in the bottom-up synthesis of nanographene, specifically focusing on the mechanochemical Diels-Alder (DA) reaction. The study investigates the effect of different reaction conditions and dienophiles on the mechanochemical DA reaction, aiming to optimize reaction efficiency and yield using a ball mill. The initial trials with a sterically hindered dienophile (2) and an electron-deficient diene experienced repeated failure, while reactions using dienophile (B), a terminal alkyne showed more promising results. Various variables were examined, including reaction time, jar size, ball size, ball number, shaking frequency, liquid-assisted grinding (LAG), heating, and diene to dienophile ratio, …

Vanadyl Phthalocyanine As A Low-Temperature/Low-Pressure Catalyst For The Conversion Of Fructose To Methyl Levulinate, Juan Luna, Mataz Alcoutlabi, Elizabeth M. Fletes, Helia Magali Morales, Jason Parsons

School of Integrative Biological & Chemical Sciences Faculty Publications

In this study, a vanadyl phthalocyanine was synthesized and characterized using XRD, FTIR, and XPS, confirming the successful metalation of the phthalocyanine ring. XRD analysis showed the vanadyl phthalocyanine crystallized in the P-1 crystal lattice, with unit cell parameters a = 12.058 Å, b = 12.598 Å, and c = 8.719 Å, and the lattice angels were 96.203°, 94.941°, and 68.204°. FTIR spectroscopy supported the metalation by the disappearance of the N-H stretch of the non-metalated phthalocyanine. The vanadyl phthalocyanine was tested as a heterogenous catalyst for the conversion of fructose into methyl levulinate in H2SO4–methanol and HCl–methanol systems. The …

First-Principles Studies Of Electrical Polarization Effects In Ferroelectrics, Antiferroelectrics And Defects, Louis Alaerts

Dartmouth College Ph.D Dissertations

Over the last few decades, density functional theory (DFT) has emerged as a formidable tool in the field of computational material science. Not only has it become a complementary method approach to experiments by rationalizing the many complex properties of materials but its formidable predictive power can also be used to identify the most promising candidates for specific applications. Point defects in semiconductors have become an important platform for the development of quantum networks due to their ability to act as spin-photon interfaces. Spectral diffusion, the broadening of the optical emission line, can significantly impact the performance of these defect-based …

Toxicity And Biodegradability Of Novel Boronium Vs Conventional Ammonium Based Anti Microbial Compounds In Wastewater Treatment Systems, Noor Shalan

Poster Presentations

Quaternary ammonium compounds (QACs) are highly effective as disinfectants, herbicides, and pesticides; thus, overuse causes elevated levels of residual toxicity in domestic and industrial wastewater. QACs can be toxic to essential bacteria breaking down pollutants in wastewater treatment plants (WWTPs) and can remain untreated in effluent, harming the environment, and contributing to antibiotic resistance, posing risks to human health. Novel boronium-based antimicrobial compounds have demonstrated efficacy in eliminating bacteria, fungi, and viruses. If the boronium compounds exhibit lower residual toxicity, they could offer a promising alternative to QACs. Because these compounds are still in development, their potential toxicity to the …

Assessment Of H2s-Induced Cracking Susceptibility In Steam Line Pipes And Weld Zones During Geothermal Well Construction, Riene Kaelamanda Pragitta, Yudha Pratesa

Journal of Materials Exploration and Findings

The susceptibility of steam line pipes, especially in the HAZ (heat-affected zone) and weldment areas, to hydrogen sulfide in the geothermal industry is crucial to understand from the early stages, particularly during construction. The combination of tensile stress from residual stresses after welding and metallurgical phase transformation makes the joint areas vulnerable to sulfide stress cracking. This condition becomes even more extreme when the equipment operates during the well stimulation phase. This research assesses the severity of H₂S-induced cracking using NACE MR0175 and ISO 15156-1 standards, focusing on the effects of pH and partial pressure of H₂S (p_{H₂S …}

Electrodeposition Of Gallium Nitride_Unraveling The Role Of Precursors, Deposition Conditions, And Substrate Effects For Semiconductor Applications, Mauricio Azier Leyva Aranzabal

Open Access Theses & Dissertations

Gallium nitride (GaN) is a wide-bandgap semiconductor noted for its remarkable optoelectronic and structural characteristics, rendering it a potential material for high-power, high-frequency, and optoelectronic device applications. This dissertation investigates the electrochemical synthesis of GaN thin films by potentiostatic and galvanostatic electrodeposition techniques using aqueous solutions of gallium nitrate (Ga(NO3)3), ammonium nitrate (NH4NO3), and auxiliary agents like potassium nitrate and urea. The main aim is to examine the essential elements affecting nitrogen incorporation and film shape while assessing electrochemical performance on various conductive substrates.A thorough investigation was performed to evaluate the impacts of electrodeposition duration, electrolyte pH, precursor molar concentrations, …

Silver Nanoparticles In Ammonia Sensing And Photovoltaics, Madhuka Liyanage

All Dissertations

Nanocomposite films (NCF) containing silver nanoparticles (AgNPs), separated by thin layers of silica/poly-4-vinylpyridine/polyvinylpyrrolidone, were fabricated via drop casting, spin coating, dip coating on glass substrate and drop casting on nylon filter membranes. The more uniform films were produced by drop casting on nylon filter membranes due to their solvent wicking properties. The films demonstrate electrical conductivity that varies in response to moist ammonia and water vapors. The changes in conductivity are attributed to hydrogen bonding between ammonia and water molecules with the silica/polymer layers, as well as the direct adsorption of ammonia onto the silver surface. Notably, NCFs with polyvinylpyrrolidone …

Qualitative And Quantitative Analysis Of New Psychoactive Substances And Related Metabolites Using Liquid Chromatography-Ion Mobility-Mass Spectrometry (Lc-Im-Ms), Ralph Aderorho

All Dissertations

The increasing prevalence of novel psychoactive substances (NPS) in illicit drug markets has posed significant challenges for forensic and clinical toxicology, primarily due to the structural similarity and diversity among these compounds. This dissertation investigates the application of advanced liquid chromatography-ion mobility-mass spectrometry (LC-IM-MS/MS) techniques, using the high-resolution Structures for Lossless Ion Manipulations (SLIM) platform and the drift tube ion mobility spectrometry (DT-IMS), for the qualitative and quantitative analysis of various types of synthetic opioids, synthetic cannabinoids, psychedelics and xylazine. By combining IMS separations with mass spectrometry and targeted chemical derivatization, this work enhances the ability to distinguish and characterize …

The Evolution Of Nanoparticles In Nanoparticle Doped Optical Fibers, Mary Cahoon

All Dissertations

Optical fiber and fiber laser technologies based on silica glass are critical to many technologies today. One method to improve the optical performance of laser fibers is engineer the local environment around the active elements in the glass. To that end, this Dissertation focused on the fabrication and characterization of fibers made with nanoparticles incorporated into the glass to control the local composition. First, the nanoparticle composition and structure was analyzed as it evolved from from the initially-synthesized form to incorporation into the dense aluminum-silicate glass. The aluminum oxide in the glass was found to be important not only to …

Tailoring The Morphology Of Block Copolymers Via Solvent-Vapor Annealing, Bayleigh Madelin Loving

Honors Theses

Triblock polystyrene-polyisobutylene-polystyrene (PS-PIB-PS) copolymers have widespread applications from thermoplastic elastomers to protective coatings for ballistic applications. The incompatibility between the soft PIB and hard PS phases leads to phase separation and subsequent formation of morphological domains like lamellae and cylinders. The structures are stabilized by physical crosslinks, which can greatly improve the toughness of the triblock systems by preventing chain pullout during tensile deformation. We tailored the morphologies (achieving different morphologies with the same block copolymer) by changing the annealing conditions of the block copolymers. Solvent vapor annealing was used to selectively activate the mobility of a particular block, causing …

Disulfide-Cleavable Linkers In Antibody-Drug Conjugates For Targeted Cancer Therapy, Emily Hwang

Undergraduate Honors Thesis Collection

This project aims to discover a way to improve the safety of and reduce adverse side effects of disulfide-linked antibody-drug conjugates. Disulfide-cleavable linkers for antibody-drug conjugates function by exploiting the differential concentrations of dominant thiol species in the blood plasma and in the cytosol of malignant cells. This project aimed to identify a relationship between the stability of disulfide cleavable linkers in the blood plasma and disulfide linker structure, to prevent premature release of the cytotoxic drug. Three disulfide linker analogs with varying carbon chain lengths were synthesized through reaction with 2,2’-dipyridyl disulfide. Each analog was conjugated to a fluorescent …

Semiconductors In Space: Data Analysis Of Microgravity's Impact On Crystal Formation, Keegan Jo Jackson

Undergraduate Honors Thesis Collection

Comprehensive data analysis on crystal growth in microgravity is a requisite to inform understanding of prior work. Our research constructed and analyzed a database containing data gathered from research focusing on semiconductors grown in microgravity. Data curation spanned multiple decades, countries, and semiconductor materials. All relevant reported information was recorded in the database, notably data regarding the metrics used to determine the impact space had on crystal growth: size, structure, uniformity, and performance. After data cleaning and data processing, the database was organized and readied for analysis. Data analysis was performed using RStudio and SciKit-learn. RStudio was employed for data …

Synthesis Of Single Chain Polymer Nanoparticle Networks By Reinitiating Raft Polymerization, Dallas Donovan

Honors Theses

Hydrogel materials, which are polymer networks comprised mostly of water, hold significant promise for biomedical applications due to their compatibility with biological systems. Conventional hydrogel materials are often brittle and weak, but most applications in biomedical systems require materials to be strong and tough. The topology of a polymer network dictates its mechanical properties. An important strategy for designing tougher hydrogels is the release of stored length, such as from the unfolding of polyprotein cross-linkers. Inspired by the success of the strategy, we report progress towards a fully synthetic design using single chain nanoparticles (SCNPs) into a hydrogel. SCNPs, which …

Chemistry Education At The University Of Southern Mississippi Through Computation And Active Learning Methods, Sadie Pitre

Honors Theses

Education is one of the pillars of society. It evolves alongside scientific progress, shaping how students learn and engage with complex topics. The incorporation of new educational standards at The University of Southern Mississippi (USM) was implemented in two parts: through computational chemistry laboratory exercises for teaching laboratories and through the synthesis of organic molecules for research projects in an upper-level spectroscopy class. The goal of these projects is to improve learning of abstract and/or complex topics beyond the teaching methods traditionally utilized in the undergraduate laboratory and in the classroom.

Computational chemistry, which uses theoretical calculations to model molecular …

Synthesis And Characterization Of New Inorganic Materials In Different Length Scales; From Nanometer To Micrometer, Kirkland Sheriff

All Dissertations

In this dissertation there are a new series of Preyssler polyoxometalate (POM) crystalline solids created using electrochemical potential. It was found that using electrochemical potential, where nucleation and reduction occur simultaneously, was a convenient method for exploratory synthesis creating new crystalline solids in aqueous solution and at room temperature. The general structure feature reveals that Preyssler POM was covalently linked by various metals from the d and f block including Co²⁺, Ni²⁺, La³⁺, Nd³⁺, Gd³⁺ and Ho³⁺ where the POM was reduced by 2 to 4 electrons. The resulting solids …

Composition And Rich/Lean Loading-Dependent Density Measurements Of A Series Of Aqueous Ionic Amines For Co2 Capture, Claudia Nguyen

Honors Theses

As climate change worsens worldwide, there is a drive to develop more efficient and sustainable methods to mitigate its impact through carbon capture methods like carbon dioxide scrubbing. Carbon scrubbing directly captures carbon dioxide (CO2) emissions from industries or power plants before they are released into the environment. The CO2 captured can be utilized for various applications or can be stored underground. However, this method faces numerous challenges, such as the degradation of the solvent or corrosion of equipment. As a result, research has expanded to find a better medium to overcome these issues. In particular, aqueous ionic amines (AIA) …

Toxicity And Biodegradability Of Novel Boronium Vs Conventional Ammonium-Based Antimicrobial Compounds In Wastewater Treatment Systems, Noor Shalan

Honors Theses

Quaternary ammonium compounds (QACs) are highly effective as disinfectants, herbicides, and pesticides; thus, overuse causes elevated levels of residual toxicity in domestic and industrial wastewater. QACs can be toxic to essential bacteria breaking down pollutants in wastewater treatment plants (WWTPs) and can remain untreated in effluent, harming the environment, and contributing to antibiotic resistance, posing risks to human health. Novel boronium-based antimicrobial compounds have demonstrated efficacy in eliminating bacteria, fungi, and viruses. If the boronium compounds exhibit lower residual toxicity, they could offer a promising alternative to QACs. Because these compounds are still in development, their potential toxicity to the …

Determining The Structure And Function Of Type Iv-A Anti-Crisprs, Olivine Redman

All Graduate Theses and Dissertations, Fall 2023 to Present

Bacteria face a constant existential threat in the form of infection by viruses along with other forms of mobile genetic elements, such as bacteriophage and transposable elements. To survive, bacteria and other prokaryotes have evolved various immune systems to evade these would-be invaders. One such immune system is the CRISPR-Cas system, an adaptive immune system able to record the genetic signature of invading viruses in order to recognize and destroy them should they be encountered again in the future. In this thesis I present data that sheds light on the mechanism of one particular subtype of CRISPR-Cas systems: the type …

Biomimetic Design Of Mechanochromic Single-Chain Nanoparticle Polymer Networks, Samuel Robinson

Honors Theses

Hydrogels are a class of polymer networks that show promise in many biomedical applications but are typically limited in use due to their brittle nature. Synthesizing hydrogel networks that are comparable to biological materials has long been an area of interest. In this study, we are working to create a polymer network inspired by the muscular protein, titin. Titin can unfold under mechanical tension, releasing stored length, making the muscle material extensible and durable. To mimic this behavior, we propose creating a polymer network with similar stored length using single chain nanoparticles (SCNPs) cross-linked with phenolphthalein (PP) and β-cyclodextrin (β-CD). …

Bioavailability Of Lead In Terre Haute Soils, Terre Haute, Indiana, Zach Kemp

All-Inclusive List of Electronic Theses and Dissertations

Contamination of soils from heavy metal pollution has been a global concern for decades. Heavy metals are released into the soil from natural and anthropogenic releases. The largest producers of heavy metal pollution include mining, industrial production, and the combustion of fossil fuels. Vigo County formed in 1818, and Terre Haute was established in 1832. After the discovery of coal in Clay County in 1867, Terre Haute became the third largest coal producer and fifth largest iron manufacturer in the state during that time. Lead, in particular, is a heavy metal of concern because of the harmful effects to humans …

Modeling Degradation In Li-Ion Batteries: Analyzing Single-Cell Degradation And Applying It To Customized Pack-Level, Mohannad Y. Alkhalil

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

The rapid expansion of lithium-ion (Li-ion) battery applications in areas such as electric vehicles (EVs), renewable energy storage, and portable electronics has drawn attention to the need for improving their performance, safety, and longevity. As Li-ion batteries become essential across technologies, understanding degradation mechanisms is critical for optimizing design and ensuring reliable operation. This work provides a detailed overview of modeling degradation in Li-ion batteries, focusing on single-cell behavior and its implications for pack-level performance.

The PyBaMM (Python Battery Mathematical Modeling) package, an open-source battery simulation tool written in Python, is used for single-cell simulations. Liionpack, another Python-based library, is …

From Molecular Crystals To Catalytic Surfaces: Computational Approaches To Complex Systems, Thiago Henrique Da Silva

Boise State University Theses and Dissertations

Understanding and modeling complex systems is one of the core challenges in modern science. Whether it be the intricate interactions within molecular crystals, the evolving mechanisms of bacterial resistance, or the dynamics of catalytic surfaces, accurately representing these systems is essential for scientific progress. This dissertation addresses these challenges by focusing on advances in computational modeling, demonstrating how various methods such as Density Functional Theory (DFT), machine learning, and custom-developed methods can simplify and help predict complex behaviors across multiple domains. By applying and understanding the scope of these methods to each field, this work underscores how computational modeling bridges …

Mechanistic Investigation Of Ring-Opening Polymerization Of Polycaprolactone Using Tin(Ii) Catalysts: Ligand Effects And Biomedical Applications, Eva-Larue M. Barber

Honors Scholar Theses

This research explores the mechanistic aspects of ring-opening polymerization (ROP) of ε-caprolactone (CL) to produce polycaprolactone (PCL), a biodegradable polymer widely used in biomedical applications. The study investigates how light exposure and catalyst concentration influence polymerization efficiency, using tin(II) 2-ethylhexanoate [Sn(Oct)₂] as the catalyst in a non-polar toluene solvent at 90 °C. Reactions were conducted under either ambient light or black light bulb (BLB) illumination, with monomer-to-catalyst ratios of 1:1 and 200:1.

Proton nuclear magnetic resonance (¹H NMR) spectroscopy was used to analyze conversion efficiency by tracking the disappearance of monomer signals and appearance of characteristic PCL peaks. Results revealed …

Kinetic Analysis Of Hydrolysis And Hydrothermal Conversion Of Methyl Cellulose To Dodecane, Joseph Olembo Were

Electronic Theses and Dissertations

Environmental pollution due to emission of greenhouse gases and increasing global energy demand are some of the concerns associated Analysis with the use of fossil fuels. These concerns have triggered the exploration of sustainable and efficient methods for renewable energy production. One such method is the conversion of cellulosic biomass to hydrocarbon fuels using hydrogen bronze metals. Cellulose is the most abundant biomass globally, and thus its utilization can lead to more sustainable energy production. Previous studies have reported the conversion of cellulose to hydrocarbons at high temperatures and hydrogen pressure. This work focuses on the conversion of methyl cellulose …

A Kinetic Analysis On Hydrolysis And Hydrothermal Conversion Of Cellulose To Dodecane, Joel Nyangoka Onyancha

Electronic Theses and Dissertations

Cellulose, the most abundant biomass on Earth, offers a promising pathway for alternative energy through conversion into alkane hydrocarbons. Traditional methods rely on high temperatures and high-pressure hydrogen, often derived from petroleum. In this study, we investigated the conversion of Microcrystalline Cellulose using hydrogen metal oxides (bronzes) under milder conditions. Following ASTM E3417-24 hydrolysis protocols, we employed hydrogen bronzes with toluene for product extraction. This approach enabled conversion at lower temperatures without pressurized hydrogen. Products were analyzed using Gas Chromatography Mass Spectrometer for identification and Gas Chromatography Flame Ionization Detector for quantification. Our findings revealed the formation of a possible …

Binary Solid/Liquid Equilibrium Of Mixtures Of Thermally Robust Salts And Molecular Compounds For Use As Heat Transfer Fluids, Jared Ridge Mathews

Honors Theses

Fossil fuels, contributors to climate change that may bear catastrophic consequences, power the entire world. The human species is almost entirely dependent on fossil fuels for energy, but other sources of renewable and environmentally friendly energy must be developed. Concentrated solar power (CSP) is a promising source of renewable energy with hampered potential—better heat transfer fluids (HTFs) are needed for it to be economically feasible. Currently, the HTFs in industrial use are predominantly either synthetic oils or nitrate-based molten salts. Synthetic oils are only stable up to 400 °C, and molten salts often have high melting temperatures, making them prone …

Comparison And Evaluation Of Overlay And Leveling Binder In Traffic Circle Construction, Pratik Neupane

Graduate Theses and Dissertations (2019 - present)

Traffic circles play a vital role in managing traffic flow and ensuring safety, yet their unique traffic conditions make them prone to early cracking and deformation. This study evaluated the performance of overlay and leveling binder asphalt mixtures for a reconstructed traffic circle at the University of South Alabama, using plant-mixed laboratory-compacted (PMLC) specimens. Volumetric analyses were performed to determine maximum specific gravity (Gmm), bulk specific gravity (Gmb), and air voids content. Laboratory tests were conducted on both the overlay and leveling binder layers using indirect tensile cracking test (IDEAL-CT) and indirect tensile rutting test (IDEAL-RT) to assess cracking tolerance …

Molecular Insights: Advances In Single Molecule And Single Particle Detection For Analysis Of Chemical, Physical, And Biological Phenomena, James Ethan Batey

Chemistry & Biochemistry Undergraduate Honors Theses

This thesis is focused on recent advancements made in the field of chemical imaging, optical microscopy, and recent developments that have improved spatial, temporal, or spectral resolution or have made certain techniques more accessible and cost effective for their wider adoption. This thesis is organized based on the systems of interest we studied with each new technique. Although, it is important to note that many of the methods here can be used with a multitude of systems even if not explicitly mentioned. The first chapter of this thesis will discuss the current state of chemical imaging, common terminology, and important …

Using Gaussian Process Regression To Learn Thermodynamic Equations Of State With Uncertainty Quantification, Austen T. Lee

Chemical Engineering Undergraduate Honors Theses

This study investigates the use of derivative-informed Gaussian Process (GP) models to estimate thermodynamic behavior across temperature and density by building a Helmholtz-based equation of state. Argon, a stable monatomic gas, was chosen as a case study within the vapor region. The GP model was trained using values of experimentally measurable properties found by taking first and second derivatives of the original potential function. Results show that while the GP model offered uncertainty quantification and informed thermodynamic behavior, it predicted values that deviated from the ground truth depending on the property. The model exhibited high confidence in regions with substantial …

Development Of Porous Separators For Lithium-Ion Batteries Via 3d Printing And Thermally Induced Phase Separation, Abraham Enchinton

Open Access Theses & Dissertations

Additive manufacturing processes allow the development of custom-shape rechargeable batteries, but research in custom filaments for fused deposition modeling (FDM) of battery separators has remained limited until now. This study discusses the development and optimization of a composite thermoplastic filament feedstock to 3D print separator membranes. A number of post-processing steps - leveraging the thermally induced phase separation (TIPS) of the composite filament - are introduced in tandem with FDM to promote microporosity formation through the removal of the sacrificial diluent phase within 3D printed samples. Three distinct compositions of varying polymer/diluent ratios were developed and thoroughly investigated through thermogravimetric …