Digital Commons Network^™

Electrochemical Impedance Spectroscopy Studies On Inhibitive Performance Of Aluminum Triphosphate Pigment, Yong-Gui Liao, Zhi-Jun Gu, Zhi-Gang Zhang, Qi-Long Guo, Fang-Teng Su

Journal of Electrochemistry

The epoxy coatings on A₃ steel sheets containing calcite or aluminum triphosphate (AlTP), were investigated by Electrochemical Impedance Spectroscopy (EIS). The results showed that calcite pigment is not an inhibitor, but an extender pigment, and that AlTP pigment can considerably enhance the protective performance of epoxy coating. The triphosphate ion at the interface between the steel substrate and the coating can complex with the corrosion product, such as ferric and ferrous ions, and form a compact protective film which effectively separates the steel substrate from the aggressive media.

A Study On The Performance Of Matrix Prepared By Tape Cast And Its Molten Carbonate Fuel Cells (Mcfcs), Hua-Xin Lin, Bao-Lian Yi, Li Zhou, Chang-Qing He, Lian-Ying Kong, En-Jun Zhang

Journal of Electrochemistry

The matrix prepared with γ-LiAlO₂ powder and by tape cast displayed higher ability of preventing from gas cross over and lower ohmic polarization. The voltages of the stack (three cells, 122 cm²) stacked with the matrix were 2.02 and 1.78 V at 200 and 246 mA/cm², respectively, and the output power reached 53.4 W. The cell (28 cm ²) voltages were 0.85 and 0.75 V at 200 and 300 mA/cm², respectively, and the output power was about 6.6 W. Compensating the shrinkage of matrix in stacking cells promoted the enhancement of the …

Rhodium As A Ubiquitous Substrate For Surface Enhanced Raman Spectroscopy, Bin Ren, Xu-Feng Lin, Zhong-Qun Tian

Journal of Electrochemistry

Raman Spectroscopy is a powerful technique in characterizing the molecular structure at the molecular level. However, only after the discovery of surface enhanced Raman scattering (SERS) effect, has it become one of the most widely used technique in surface sciences. The limitation that only Ag, Au and Cu can produce prominent SERS signal of practical significance, greatly hinders the application of this technique. Recently our group has made great progress in extending SERS to pure transition metal surfaces, such as Pt, Ni, Fe, Co etc.

Two-Dimensional Surface Raman Imaging Of A Roughened Iron Electrode In Saline Water, Pei-Gen Cao, Jian-Lin Yao, Jun-Wei Zheng, Bin Ren, Ren-Ao Gu, Zhong-Qun Tian

Journal of Electrochemistry

The analysis of the composite and distribution of iron oxide due to pit corrosion in saline solutions (3.4% NaCl) is of great importance. Many electrochemical methods, XPS, and other photoelectronic techniques have been applied to this domain. Surface enhanced Raman scattering (SERS) spectroscopy can provide the vibrational information of surface species with high sensitivity and is very useful in the study of surface chemistry of iron. Notwithstanding, the application of SERS in iron corrosion is hampered for its SERS-inactivity. Efforts have been devoted to extend the use of SERS to the study of iron.

The Charge Transfer Effect Of Sers Induced By The Electrochemical Hydrogen Evolution Reaction, Feng-Ming Liu, Qi Han, Yan-Xia Chen, Qi-Ling Zhong, Bin Ren, Zhong-Qun Tian

Journal of Electrochemistry

As one of the important mechanisms of SERS, the charge transfer (CT) enhancement requires the strong interaction of the adsorbed species with the substrate in order to permit the transition of charge between the metal Fermi level (energy state) and the molecular orbital. The high enhancement needs the match of the energy gap between the Fermi level (or surface state) and the orbital energy level of the adsorbed molecules with the energy of the incident light. The electrode Fermi level is usually adjusted by the applied potential to satisfy the CT resonance. For the electrochemical reaction process, the frontier orbital …

Eis Characteristics Of Anodic Dissolution For P110 Steel Under Co2 Environment, Jing Li, Dong-Bai Sun, Hong-Ying Yu, Hui-Min Meng, Hui-Qin Li, De-Jun Yang

Journal of Electrochemistry

Effect of temperature on the electrochemical impedance spectroscopy for P110 steel at anodic polarized potential was investigated in simulated CO₂ saturated oil produced water. The results demonstrated that in the range from room temperature to 90 ℃, there was a critical temperature , below which a three time constant impedance spectrum was observed and above which a two time constant spectrum was shown. A reasonable explanation was given to this phenomenon in an effort to elucidate the mechanism of anodic dissolution and characteristics of CO₂ corrosion.

How Can Direct Mthanol Fuel Cell Benefit From Carbonate Media, Lin Zhuang, Yang Wang, Jun-Tao Lu

Journal of Electrochemistry

The kinetics of methanol oxidation and oxygen reduction in 0.5 mol/L K₂CO₃ were compared with those in 0.5 mol/L H₂SO ₄. Experiments revealed that carbonate media could be more beneficial to direct methanol fuel cell(DMFC). Firstly, both electrode reactions show better performance in the carbonate than in the acid; secondly, materials other than noble metals become possible to be used as the anodic and cathodic catalysts; thirdly, the potential dectease caused by methanol crossover could be depressed by using metal oxide catalysts not stable in acid, such as MnO₂.

Synthesis Of Limn2O4-ΔClΔ Cathode Material By Like-Sol-Gel Methode, Zhao-Yong Chen, Yi He, Xing-Quan Liu, Zhi-Jie Li, Zuo-Long Yu

Journal of Electrochemistry

LiMn₂O_4-δCl_δ was synthesized by like sol gel methode, with calculated LiOH·H₂O, Mn(No₃)₂⋅6H₂O and LiCl·H₂O, and made electrochemical test with these compounds as positive materials. Result demostrated that LiMn₂O_4-δCl_δ cathode material has exellent stability and nearly no capacity loss after reaching stability.

Raman Spectroelectrochemical Study On Bioactive Molecules, Xiao-Wei Cao, Hai-Feng Yang, Zhe Su Meng Xiao Yun Wang, Xia-Qin Wu, Zong-Rang Zhang

Journal of Electrochemistry

Electron-transfer reaction is known to be one of the key reactions for generating biological functions. Mechanism revelation at a molecular level of such kind reactions is to be very helpful for us to understand life essence. In fact, surface enhanced Raman scattering (SERS) is one of the most powerful tools for the study on metal-electrolyte and metal-vacuum interfaces since 1970's. Moreover, Raman spectroscopic study in enzymology has provided attractive results during last twenty-five years.

In Situ Raman Spectroelectrochemical Characterization Of The Prussian Blue/Platinum Modified Electrode, Xiao-Wei Cao, Rong Wang, Gui-Hua Wang, Zong-Rang Zhang

Journal of Electrochemistry

Prussian Blue is known to be deposited electrochemically on the electrode surface, producing a dense redox active layer. Since the Prussian Blue modified electrode was first reported by Neff in 1978, different in situ spectroelectrochemical techniques have been widely used to investigate its electrochemical mechanism. But no research work related to the in situ Raman spectroscopic studies on it has been reported. In this paper we try to characterize the nature of thin Prussian Blue films on platinum substrates with in situ Raman spectroelectrochemical technique.

Adsorption Behavior Of Co At The Ultrathin Rh And Pt Film Electrodes, Yong Xie, Xiao-Qin Li, Bin Ren, Zhong-Qun Tian

Journal of Electrochemistry

Pt group metals have been widely used in catalysis such as hydrogenation of organic compounds and the oxidation of carbon monoxide. The information about CO adsorption on the Pt group surfaces and the influence of other surface species, such as hydrogen and CO₂ will be greatly helpful to elucidate the adsorption behavior of CO on Pt group metal surfaces and get a deeper understanding of catalytic mechanisms of Pt group metals. Surface enhanced Raman spectroscopy (SERS) has been becoming an increasingly important means to characterize the electrochemical metal solution interface over the past two decades. Our laboratory has successfully …

Adsorption And Oxidation Of Ethanol On Nm-Pt/Gc Electrode Ii. Eqcm And In-Situ Ftir Spectroscopic Studies In Acid Media, Guo-Liang Chen, Sheng-Pei Chen, Zhi-You Zhou, Chun-Hua Zhen, Shi-Gang Sun

Journal of Electrochemistry

The adsorption and oxidation of ethanol on nm Pt/GC electrode in acid solutions containing 0.1 mol·L ^-1 H₂SO₄ +0.1 mol·L ^-1 CH₃CH₂OH was investigated by using cyclic voltammetry, EQCM and in situ FTIR spectroscopy. The experimental results demonstrated that the oxidation of CH₃CH₂OH is closely relaed to solution acidity and oxygen species on electrode surface; CH₃CH₂OH was oxidized on nm Pt/GC electrode in acidic media via a dual path reaction mechanism, i.e . CH₃CH₂OH may be oxidized into CO₂ through …

The Photoelectrochemistry Of Tio2-Polyaniline Composite Film, Huai-Guo Huang, Zhi-Xin Zheng, Jin Luo, Hong-Ping Zhang, Ling-Ling Wu, Zhong-Hua Lin

Journal of Electrochemistry

A TiO₂ and polyaniline (PANI) composite film was obtained by electrochemical methods. The SEM image of the composite film showed that the PANI film is almost completely covered with TiO₂ efficiency. The spectra of photocurrent for the TiO₂-PANI composite film were different from these of TiO₂ film photosensitized by PANI. The bandgap energy of TiO₂ film on partially oxidized PANI film was determined as 3.0 eV by the threshold energy of photocurrent band for TiO₂. The spectra of photocurrent for partially oxidized PANI film electrode suggested that it has the characteristics of …

Catalytic Effect Of Cl- On Electrodeposition Of Binary Zinc Alloys With Iron Group Metals, Ren-He Yin, Zheng-Hua Fang, Wei-Min Cao, A.Za Karia, Rong-Ming Zhou

Journal of Electrochemistry

Zinc iron group metal alloys were deposited under coulostatic (10C⋅cm^-2) at 40 ℃ chloride baths. The deposited alloys were quantitatively analyzed by Atomic Absorption Spectrometry. The current efficiency, percent content and partial polarization curves were obtained by the results. The morphology of the deposits was observed by means of Scanning Electron Microscopy(SEM). We observe that the electrodeposition of zinc iron group metal alloys is one of the best known examples of anomalous codeposition. We found the catalytic effect of Cl^- on the electrodeposition behavior of iron group metal. Overpotential of iron group metal droped abruptly at high …

On-Road Remote Sensing Of Automobile Emissions In The Denver Area: Year 2, Sajal S. Pokharel, Gary A. Bishop, Donald H. Stedman

Fuel Efficiency Automobile Test Publications

The University of Denver has completed the second year of a five-year remote sensing study in the Denver area. The remote sensor used in this study is capable of measuring the ratios of CO, HC and NO to CO2 in motor vehicle exhaust. From these ratios, we calculate the percent concentrations of CO, CO2, HC and NO in the exhaust that would be observed by a tailpipe probe, corrected for water and excess oxygen not involved in combustion. Mass emissions per mass or volume of fuel can also be determined. The system used in this study was configured to determine …

Effects Of External Electric Field On The Interfacial Properties Of Weakly Dipolar Fluid, V. B. Warshavsky, T. V. Bykov, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

In the framework of modified mean-field density-functional theory, effects of a uniform electric field on the interfacial properties of a model dipolar fluid are studied. Both density and orientational order-parameter profiles of the planar vapor-liquid interface are obtained as a function of the field strength. For the dipolar fluids with reduced dipole moment μ₀^*0^*E*/T*!1) can shift the surface tension by few percent. We also find that the electric field actually reduces the thermodynamical surface tension but enhances the mechanical surface tension at the equimolar dividing surface. To detect these field effects on …

Process For Immobilizing Waste Using Bagasse (Us Patent 6174275), Michael A. Janusa

Faculty Publications

No abstract provided.

Atomically Resolved Single-Walled Carbon Nanotube Intramolecular Junctions, Min Ouyang, Jin-Lin Huang, Chin Li Cheung, Charles M. Lieber

Barry Chin Li Cheung Publications

Intramolecular junctions in single-walled carbon nanotubes are potentially ideal structures for building robust, molecular-scale electronics but have only been studied theoretically at the atomic level. Scanning tunneling microscopy was used to determine the atomic structure and electronic properties of such junctions in single-walled nanotube samples. Metal-semiconductor junctions are found to exhibit an electronically sharp interface without localized junction states, whereas a more diffuse interface and low-energy states are found in metal-metal junctions. Tight-binding calculations for models based on observed atomic structures show good agreement with spectroscopy and provide insight into the topological defects forming intramolecular junctions. These studies have important …

Report Of The State Nuclear Safety Advisor Submitted To The Governor And 120th Legislature As Of January 15, 2001, Paula M. Craighead

Maine Collection

Report of the State Nuclear Safety Advisor submitted to the Governor and 120th Legislature As of January 15, 2001

Paula M. Craighead, State Nuclear Safety Advisor, Executive Department, Maine State Planning Office, Augusta, Maine, 2001.

Contents: Introduction and Executive Summary / I. Maine Yankee Decommissioning / II. Portsmouth Naval Shipyard (PNS) / III. Low-Level Radioactive Waste (LLRW) / IV. High Level Radioactive Waste / V. Transport Routes and Safety Response / VI. Shipments / VII. Status of Federal and State Legal and Administrative Proceedings / References and Resources / Glossary

An Alternative Use For Bagasse: Stabilizing Agent For Lead Waste, Michael A. Janusa

Faculty Publications

Bagasse amounts to one- third of the cane ground and supplies fuel for the generation of steam in raw factories; however, most factories have an excess of bagasse during regular grinding season. Another method for the utilization of bagasse was investigated using bagasse as a stabilizing agent for heavy metal waste solidified /stabilized in cement. Lead nitrate was used as the model heavy me ta l waste with a 10 or 15 per cent lead by weight to cement loading. Samples were cured for 7, 14, and 28 days at 24°C. Samples containing bagasse typically resulted in TCLP extract lead …

Production Of A Novel Copper-Binding Ligand By Marine Synechococcus (Cyanobacteria) In Response To Toxic Concentrations Of Copper, Arunsi C. Brown, Andrew S. Gordon

Virginia Journal of Science

Marine Synechococcus spp. are extremely sensitive to copper toxicity. Some strains have been shown to produce high-affinity, extracellular ligands of unknown structure which form complexes with free cupric ion. They are also known to produce metallothioneins (MT) in response to cadmium and zinc stress. In the present study, marine Synechococcus PCC 73109 (Agmenellum quadruplicatum BG-1) (Van Baalen) was exposed to three concentrations of CuSO₄ for various times. Size exclusion chromatography, atomic absorption spectrophotometry, and reverse phase HPLC were used to isolate an intracellular copper binding ligand of low molecular weight (< 6,500 Da). The ligand was detected after exposure to ≥ 8 μM CuSO₄ for 2 hr in BG-11 medium. …

Resonant Energy Transfer From Argon Dimers To Atomic Oxygen In Microhollow Cathode Discharges, M. Moselhy, R. H. Stark, K. H. Schoenbach, U. Kogelschatz

Bioelectrics Publications

The emission of atomic oxygen lines at 130.2 and 130.5 nm from a microhollow cathode discharge in argon with oxygen added indicates resonant energy transfer from argon dimers to oxygen atoms. The internal efficiency of the vacuum-ultraviolet (VUV) radiation was measured as 0.7% for a discharge in 1100 Torr argon with 0.1% oxygen added. The direct current VUV point source operates at voltages below 300 V and at current levels of milliamperes.

Infared Spectroscopy And Electrical Conductivity Of Copper(Ii) Cinnamate And Iodine-Doped Copper(Ii) Cinnamate, Kumar Krishnan

Student Works (2000-2009)

Copper(II) cinnamate (CC) was prepared from copper(II) acetate monohydrate and cinnamic acid. It was a light-blue powder. The Fourier Transform Infrared (FTIR) spectrum of CC, recorded as potasium bromide (K.Br) disc, indicated the presence of all bonds and functional groups expected of it and showed that it exist as an equal mixture of cis- and trans- isomers. The conductivity of CC at room temperature was 5.22 x 10⁻¹¹Scm⁻¹. It showed metallic behaviour in the temperature range 78-300 K, and its conduction mechanism obeyed Mott's variable range hopping (VRH) model in the same temperature range. The density of states at Fermi …

Preparation And Characterization Of Lithiated Cathode Materials For Lithium Batteries, Shanti Navaratnam

Student Works (2000-2009)

Four different cathode materials, LiNiO₂, LiCoO₂, LiCo₀.₂ Ni₀.₈O₂ and LiCo₀.₄, Ni₀.₆O₂ were synthesized by sol - gel technique. The prepared materials were characterized X-ray diffraction pattern, FT-IR and cyclic voltammetry. X-ray diffraction pattern shows crystallinity of materials, increases with higher calcination temperature. From FT- IR studies, it was shown, that the purity of sample also increased with prolong heating at higher temperatures. It was possible to obtain pure and highly crystalline LiNiO₂ after heating for fourteen hours at 800°c. Cyclic voltammetry shows the four prepared materials are suitable for fabrication of cathode, as lithium ions can intercalate and de-intercalate. LiNiO₂ …

The Effect Of Aluminium Oxide And Cerium Oxide As Dispersoids In Chitosan-Lithium Acetate Complexes, Hoi Mien Leow

Student Works (2000-2009)

In this study, chitosan with 85% deacetylation was used with Ni(OAc)₂·2H₂O as doping salt and Al₂O₃, or CeO₂ as dispersoid. They were mixed in certain weight percentages and dissolved in 100ml of 0.5% acetic acid solution. These solutions were poured into petri dishes and left at room temperature for film formation. Infrared Spectroscopy has shown that there is interaction between chitosan and LiOAc with and without dispersoid. The peaks are shifted. broadened. split and differs in intensity. The electrical conductivity of all samples was calculated using the bulk resistance value obtained from the complex admittance plot. The highest electrical conductivity …

Sulphide Based Materials As Potential Anodes In Lithium Ion Cells, Azlin Sanusi

Student Works (2000-2009)

Sulphides based compounds PbS and SnS have been studied as possible anode material in lithium ion cell. PbS was prepared by the chemical bath deposition technique and SnS by the double decomposition method. Both samples were characterized by the powder X-ray diffraction technique and energy dispersive analysis of X-rays (EDAX). The room temperature electrical conductivity of PbS is 2.6 x 10⁻⁴ S cm⁻¹ and SnS is 5.3 x 10⁻⁷ S cm⁻¹ while at 90°C the electrical conductivity of PbS is 3.3 x 10⁻⁴ S cm⁻¹ and SnS is 2.90 x 10⁻⁶ S cm⁻¹ Cyclic voltammetry determined the potential anode ability …

Synthesis And Characterization Of Lithiated Mixed Metal Oxides For Lithium Ion Rechargeable Batteries, Seng Gee Tan

Student Works (2000-2009)

Lilhiated mixed metal oxides for lithium ion rechargeable batteries were prepared by the sol gel technique. Samples consisting of lithium acetate, nickel nitrate, cobalt nitrate, manganese acetate and aluminium fluoride were characterised using X-ray Diffraction (XRD), Differential Scanning Calorimetry (DSC), Fourier Transform Infrared Spectroscopy (FTIRS). Energy Dispersive Analysis of X-rays (EDAX) w1d Cyclic Voltammetry (CV). Thermal characterization shows that the acetates, nitrates and fluorides of precursors material deform at temperature between 50° to 100°C and the products begin to form at a temperature between 264°C to 271°C. FTIR studies show that the materials must be heated for a longer time …

Effect Of Electron-Attracting Groups On The Thermal Stability Of Subtituted Copper (Ii) Benzoate, Fauziah Kamaruddin

Student Works (2000-2009)

Copper(II) benzoate, copper(II) 4-fluorobenzoate, copper(II) 4-chlorobenzoate, copper(II) 4-bromobenzoate, copper(II) 4-iodobenzoate, copper(II) pentafluoro benzoate, copper(II) 4-nitrobenzoate and copper(II) 3,5-dinitrobenzoate are potential low dimensional thermally stable molecular electronics. The them1al properties of these samples are investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). TGA reveals that copper(II) benzoate (CB) slowly decomposed at 243.5°C, losing 67.7% of its weight at 515°C. The DSC shows two endotherms separated by an exotherm. The first endotherm at 224°C may due to the breaking of bridging bond to give benzoyloxy radicals. The exotherm at 231°C may due to the formation of volatiles from the decomposition …

Characterization Of Lithium Intercalation Oxides Based On Manganese And Copper, Vengidason Seguprakash

Student Works (2000-2009)

In this study, several lithium intercalation compounds have been synthesized and characterized. Lithium manganese copper oxide cathode materials were prepared by sol gel method using tartaric acid as the gelating agent. Five types of cathode materials were synthesized. The sol gel technique has permitted the synthesis of manganese oxides that are capable of reversibly intercalating large amounts of lithium ions. To see the effect of adding copper to lithium manganese oxide several experiments were carried out. These include X-Ray diffraction to see whether the LiMn₂O₄ lattice has widened or collapsed. It was seen that LiMn₂O₄ and LiCu₂O₂ XRD patterns were …

Evidence Of Nanostructure In Multilayer Cdse Thin Films, Suganthi Devadason

Student Works (2000-2009)

Cadmium Selenide multilayer thin films have been prepared using physical vapour deposition method. Alternate layers of Cadmium and Selenium are deposited on unheated glass substrates. Morphological study of the samples has been done using SEM micrographs with a magnification of 5000. The EDX analysis gives the quantitative atomic percentage content of elements present in the samples. It is found that the high Cadmium content in the samples increased the crystallinity. From XRD measurements, it is evident that many films are polycrystalline in nature with a peak corresponding to < 111 > plane orientation of the zinc blende structure. The lattice constant of the …