Cfd Optimization Using Ansys Fluent For Advanced Thermal Energy Conversion, A Case Study On Heat Recovery Systems In Iraqi Power Plants, Basim Mohammed Abid Ali

Al-Esraa University College Journal for Engineering Sciences

The energy sector in Iraq has lots of potential but the infrastructures are old and lack optimum thermal efficiency resulting in high consumption of fuel and environmental degradation. The study focuses on the urgent necessity of modernization of the thermal energy conversion systems in the industrial plants of Iraq by means of the further development of numerical simulation. The paper applies the Computational Fluid Dynamics(CFD) through ANSYS Fluent to model and optimize a shell-and-tube heat exchanger, which is similar to the ones employed in heat recovery units in Iraqi thermal power plants like the Al-Dora power plant in Baghdad. The …

Spatial Estimation For Gas Flaring And Natural Gas Waste From Oil Production Using Remote Sensing And Gis Techniques, Hisham M. Jawad Al Sharaa

Al-Esraa University College Journal for Engineering Sciences

This study aims to provide a comprehensive geospatial gas flaring intensity and emission doses analysis throughout oil production areas in Iraq based on remote sensing and GIS-based interpolation methods. Satellite image and spatial data were combined to create a map of flaring locations, refinery locations, and associated CO₂-equivalent emissions. The results show that there is a clear spatial variation in the intensity of the emissions ranging from northern regions towards the oil fields in the south near Basra, Rumaila and West Qurna, where refinery density and high flaring activities are observed. Interpolation modelling suggests that the majority of …

Ai-Enhanced Heat Transfer Optimization In Magnetic Bio-Nanofluids, Hasan Attyah Shaboot

Al-Esraa University College Journal for Engineering Sciences

This study presents a hybrid Artificial Intelligence–Computational Fluid Dynamics (AI-CFD) framework for optimizing heat transfer in magnetic bio-nanofluids subjected to external magnetic fields. Magnetic bio-nanofluids, composed of biocompatible base fluids containing superparamagnetic nanoparticles, exhibit tunable thermal and flow behavior, making them promising for biomedical and micro-cooling applications. Conventional optimization methods based on experiments or brute-force CFD are computationally expensive and limited in exploring the full design space. To overcome these challenges, an Artificial Neural Network (ANN) surrogate model was developed to predict two key performance indicators, the Nusselt number and the friction factor, with high accuracy (R² > 0.997). The …

Adaptive Modulation Techniques To Enhance Ofdm System Performance, Alaa Aqeel Mohammed

Al-Esraa University College Journal for Engineering Sciences

The fourth-generation (4G) mobile communication is supposed to combine a broad coverage of services, including high-speed data, video streaming, multimedia applications and voice transmission, into a single scale. Adaptive OFDM (AOFDM) is among the most popular techniques proposed to meet this objective in which the settings of the transmission are dynamically optimized to the prevailing changing conditions of the channel fading. This paper is concerned with the adaptive modulation in OFDM. We find out the performance of un-coded adaptive modulation on the schemes of QAM and PSK. An effort to use convolutional coding is also integrated into the structure of …

Design And Development Of Solar-Powered Water Desalination Systems, Salam Ali Hassoon Alabooda

Al-Esraa University College Journal for Engineering Sciences

Background: Freshwater scarcity and growing energy demand have promoted interest in sustainable desalination technologies, particularly in arid areas like Iraq which has high solar resource and decentralized water supply becomes a key factor. Aim: The purpose of this study was to design and test a solar powered water desalination system that could enhance fresh water productivity, thermal efficiency and quality of water under the climatic conditions of Iraq. Methodology: It was designed as hypothetical pilot-scale system that comprised of a single-slope solar still combined with a flat-plate solar collector, a 200 W photovoltaic-driven circulation pump and 18 kg of phase …

Comparative Adsorptive Performance Of Clinoptilolite, Purolite, And Mesoporous Carbon (Cmk-3) For Heavy Metals And Hydrocarbons Removal From Real Petrochemical Effluent, Eynas Muhamad Majeed, Nuha Muhsen Ali

Al-Esraa University College Journal for Engineering Sciences

Petrochemical activities result in the generation of effluent that contain highly toxic heavy metals and oil products, which are very hazardous to the environment. The research tries to examine the adsorption capacity of three materials synthetic clinoptilolite, synthetic Purolite, and synthesized mesoporous carbon (CMK-3) in the removal of Ni²⁺, Cd²⁺, Pb²⁺, benzene, and toluene present in real refinery effluent obtained at Al-Dora Refinery in Iraq (Baghdad). The experiments were carried by batch adsorption that investigated the equilibrium behavior, kinetic performance, and the influence of ionic strength and organic co-contaminants. The heavy metal adsorption was …

The Impact Of Architectural Form On Seismic Performance Of Buildings, Durgham Munir Abdul Hadi, Abdullah Saadoon Salman, Lahib Ali Abdul Hussein

Al-Esraa University College Journal for Engineering Sciences

Seismic overall performance of buildings is a important issue in each architectural and structural design, especially in regions exposed to seismic dangers. Despite giant improvements in structural engineering technologies, the function of architectural form stays insufficiently incorporated into layout practices geared toward improving seismic resistance. This look at investigates the effect of the formal dimension of architectural design on the seismic performance of buildings by analyzing key shape-related attributes, namely regularity, symmetry, simplicity, continuity, and slenderness. An analytical–descriptive method is followed, based totally on an extensive evaluation of applicable literature and the assessment of architectural configurations with regards to their …

Quality Of Life Indicators In Historic Urban Spaces: A Case Study Of Al-Mustansiriya Madrasa, Baghdad / Iraq, Israa H. Karam Ali, Shireen I. Khazaal

Al-Esraa University College Journal for Engineering Sciences

Historic urban spaces play a central role in shaping social interaction, environmental comfort, and collective identity in cities with deep cultural heritage. Despite this importance, empirical assessments of their performance in terms of Quality of Life (QoL) from the perspective of contemporary users remain limited, particularly in the context of Baghdad. This study examines Quality of Life indicators within a historic urban space through a case study of Al-Mustansiriya Madrasa, one of Baghdad's most prominent historic educational complexes. A descriptive–analytical approach was adopted, integrating a structured questionnaire survey, systematic on-site observation, and spatial analysis based on Space Syntax techniques. The …

Interaction Design In Museum Architecture: A Contemporary Developmental Vision For The Iraqi Museum, Afaf Abdel Sahib Mohammed, Enas Salim Abdulahaad

Al-Esraa University College Journal for Engineering Sciences

The Iraqi Museum's remaining architectural form and traditional display techniques do not allow for enough interaction between visitors and the items, despite the museum's great heritage and cultural value. This between visitors and the exhibits. Additionally, the museum does not include interactive technologies and contemporary architecture, which are now essential components of modern museums around the world.This invites the question of how to optimize the Iraqi Museum's visitor experience by applying the principles of interaction design in museum architecture within a contemporary developmental vision. In order to revive the architectural spaces within the Iraqi Museum, the research aims to generate …

Experimental Analysis Of Diesel Engine Combustion Chamber Performance Using Field Measurements At The State Company For Heavy Engineering Equipment, Mohammed Kanaan Sedeeq

Al-Esraa University College Journal for Engineering Sciences

The current paper provides a detailed experiment and numerical study of the performance of the combustion chamber of a heavy-duty diesel engine in the common Iraqi industrial conditions at the State Company of Heavy Engineering Equipment (HEESCO). The main goal is to close the difference between what is specified by the manufacturers concerning the performance data, which is usually assumed to be under ideal conditions of the ISO standard, and the real efficiency of operation as witnessed in the field. The methodology is based on a hybrid approach that combines direct field measurements of in-cylinder pressure, temperature and fuel flow …

An Ai And Iot Framework For Dynamic Optimization And Sustainability In Smart Cities, Zeinab E. Ahmed, Rashid A. Saeed, Salah Hagahmoodi, Mamoon M. Saeed, Khalid Hamid, Sally D. Abugasim, Eyman F. A. Elsmany

Al-Esraa University College Journal for Engineering Sciences

Smart cities are emerging as a critical solution for creating more efficient, sustainable, and comfortable urban environments. This transformation is primarily driven by the synergistic integration of the Internet of Things (IoT) and Artificial Intelligence (AI). The IoT provides a pervasive network of connected sensors that collect real-time urban data, while AI serves as the analytical engine that processes this information to optimize city-wide systems. This paper presents a comprehensive framework that leverages this AI-IoT convergence for dynamic optimization to achieve long-term urban sustainability. The framework focuses on enabling intelligent, data-driven decision-making across core urban domains. The discussion and analysis …

Optimization Of Bearing Design In Centrifugal Pumps Using Finite Element And Experimental Methods: Application At South Refineries Company, Basra, Mohammed Hasab Naser Al-Mtasher

Al-Esraa University College Journal for Engineering Sciences

In the study, nonlinear vibration and thermo-mechanical characteristics of centrifugal pump bearings utilized in the cooling tower system of South Refineries Company (Basra) were properly examined using a combined experimental and numerical method. The intent of the study was to learn the impact of misalignment, the nature of the lubrication film, and thermal gradients on the stability of the operation of these bearings and their service life under realistic industry environment conditions. Finite element model (FEM) was constructed and tested on the basis of real field data obtained at the working pumps that allowed realistic distribution of stress and temperature. …

Li+/Na+ Hybrid Ion Conduction Mechanism In The Superionic Conductor Li3–XNaXZr2Si2Po12, Yi-Hong Wu, Xia Xie, Lei Zhu, Mu-Ran Yu, Guo-Tai Zhang, Jun-Chao Chen, Shu-Ying Sun, You-Wei Wang, Wei-Ping Tang

Journal of Electrochemistry

Hybrid ion conductors that transport multiple ionic conductive species provide a useful platform for understanding how mixed-ion transport governs ionic conductivity within a single phase. However, the controlled introduction of multiple mobile ions into solid-state electrolytes and a mechanistic understanding of their migration within the framework remain challenging. Herein, a skeleton-retained Li⁺↔Na⁺ cationic exchange was used to simultaneously induce Li⁺ and Na⁺ cations into the NASICON-type framework of Li_3–xNa_xZr₂Si₂PO₁₂ (0 < x < 3). We show that the interpenetration of NaO₆ and NaO₈ coordination polyhedra significantly influences the ionic conductivity of hybrid ion conductors. Computational …

Distribution And Transport Of Lithium Ions At Interfaces Between Graphite And Carboxymethyl Celluloses, Zi-Jun Huang, Zhen-Ying Zheng, Hua-Wei Cao, Jian Wang, Qing-Feng Zhang, Sheng-Li Chen

Journal of Electrochemistry

Carboxymethyl cellulose (CMC) is a water-processable binder widely used for graphite anodes. However, a microscopic understanding of why the identity of CMC counterions (Li⁺/Na⁺/K⁺) strongly affects electrode performance remains limited. Here, molecular dynamics (MD) simulations are used to track Li⁺ transport accessibility across electrolyte/CMC/graphite three-phase interfaces, comparing pure CMC-Li, CMC-Na, CMC-K, and mixed-counterion CMC binders. We find that CMC-Li sustains a continuous Li⁺ transport pathway from the electrolyte through the binder phase toward graphite. In contrast, in CMC-Na and CMC-K, Na⁺/K⁺ ions preferentially enrich at the graphite/binder interface, forming …

Distinct Co2 Electroreduction Behaviors Over Planar And Non-Planar Cobalt Molecular Catalysts, Ru Jia, Cheng-Biao Zhu, Zi-Mo Zhang, Tuo Wang, Kai-Cong Yang, Guang-Zhe Wang, Yang Hu, Ting-Ting Zhang, Zhen-Wei Wei, Li Xiao, Gong-Wei Wang, Lin Zhuang

Journal of Electrochemistry

Molecular catalysts serve as ideal platforms for studying electrocatalytic reaction mechanisms. While current research mainly focuses on modulating central metals or surrounding ligands, the influence of molecular spatial configuration remains largely unexplored. Herein, we synthesized two cobalt complexes with similar ligand environments but distinct spatial geometries, a planar cobalt hexaazamacrocyclic complex (CoHAM) and a non-planar acyclic Co(phen)₂Cl₂, and evaluated their performance in CO₂ reduction reaction (CO₂RR). The planar CoHAM exhibited dramatically superior CO₂RR performance compared to the non-planar Co(phen)₂Cl₂. Through a series of combined analyses using in-situ …

On The Use Of Lorawan For Smart Fishing Applications In The Blue Economy Sector, Eva Shayo

Tanzania Journal of Engineering and Technology (TJET)

The growth of digital technology is expected to transform small-scale fishery sectors, where a need for robust, low-cost, long-range communication networks becomes critical. There exist several technologies that are used in the fishery sector but they are never affordable to small scale fisheries. This study evaluates the feasibility of using low cost Long Range Wide Area Network (LoRaWAN) technology specifically tailored for smart fishing environments to small scale fishery sector. Using simulation, we assess the performance of the key performance metrics including probability of success and energy efficiency under varying device densities and time. During evaluation, we considered end devices …

Physicochemical Properties And Chemical Compositions Of Cashew Nut Shell Liquid Extracted With Carbon Dioxide–Expanded Hexane, Neema Msuya, Joseph Yn Philip, Frank Jacob, Kando K. Janga

Tanzania Journal of Engineering and Technology (TJET)

Cashew nut shell liquid (CNSL) is a mixture of phenolic compounds that can effectively replace commercially available phenols in various applications. This study investigated the physicochemical properties and chemical composition of CNSL extracted using CO₂–expanded hexane (CXH) and compared to the traditional Soxhlet extraction method. Steamed cashew nut shells (sCNS) were used in both cases.  The CXH was carried under varying CO₂-mole fractions (0.468-0.892) and temperatures (20-36 °C) whereas Soxhlet extraction was performed at atmospheric pressure and hexane boiling point. Response Surface Methodology (RSM) with Central Composite Face-Centred Design (CCFD) was employed to evaluate the effect …

Review And Development Of An Explicit Machine Learning Model For Pollutant Gas Solubility In Ionic Liquids As Green Solvents, Amir Dashti, Farid Amirkhani, Mojtaba Raji, John L. Zhou, Ali Altaee, Ali Braytee, Brett Turner, Hossein Ali Khonakdar, Amir Razmjou

Research outputs 2022 to 2026

The increasing release of greenhouse gases (GHGs) like CO₂, CH₄, N₂O, and industrial contaminants (indirect GHGs) such as SO₂ and H₂S has prompted significant global worries due to their role in climate change, air pollution, and harm to the environment. Ionic liquids (ILs) as green solvents have emerged as promising alternatives to traditional solvents because of their minimal volatility, high thermal stability, and adjustable physicochemical characteristics. Yet, limited gas solubility data in ILs is hindering their applications in carbon capture and air pollution control. Machine learning (ML) is a powerful tool for modeling and simulating the solubility of polluting gases …

Laminarin-Loaded Solid-In-Oil Nanodispersion For Enhanced Non-Invasive Transdermal Immunization, Md. Shahin Ekka Sarker, Yoshirou Kawaguchi, Rie C. Wakabayashi, Noriho J. Kamiya, Muhammad Moniruzzaman, Masahiro Goto

Publications and Research

Simple and non-invasive transdermal vaccination is an attractive alternative to conventional injection-based immunization. However, the effectiveness of transdermal vaccines is often constrained by the stratum corneum barrier. Although the use of solid-in-oil (S/O) nanodispersion technology has successfully facilitated skin permeation to induce an immunological response, the antibody titers remain suboptimal. Herein, a dectin-1 selective ligand, laminarin, was used as an immunostimulatory adjuvant to enhance the immune response. S/O nanodispersions loaded with laminarin and ovalbumin (OVA) were systematically developed and characterized in terms of particle size, in vitro OVA release behavior, and skin permeation performance using excised mouse skin. In vivo …

Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani

Makara Journal of Science

Humidity sensors are pivotal in numerous sectors, such as environmental monitoring, industrial automation, and health-care. This study presents the fabrication and detailed evaluation of an advanced humidity sensor using ethyl cellulose (EC)-coated LaFe_0.925Ti_0.075O₃ (LFTO) perovskite nanoparticles synthesized via the sol-gel method. The LFTO nanopar-ticles exhibited a mesoporous structure with an enhanced surface area, which significantly improved their moisture adsorption capabilities. The innovative application of EC coating addresses critical substrate adhesion issues, enhancing mechanical stability without compromising sensor sensitivity. Comprehensive performance evaluations revealed minimal hysteresis (

Modeling And Optimization Of Li-Ion Battery Recycling Process, Wang Lingling, Zhou Panpan, Ma Yulong

Dianchi(Changsha)

No abstract provided.

Review On Capacity Degradation Mechanisms And Lifetime Prediction Of Energy Storage Li-Ion Battery, Ma Yue, Chen Yanqiao, Wang Chu, Wang Xianwen, Liu Hui, Chen Yifei, Chen Lai, Yan Kang, Su Yuefeng

Dianchi(Changsha)

No abstract provided.

Opportunities And Challenges Of Cross-Border E-Commerce In Li-Ion Batteries, Ma Jingjing, Chen Xianyi

Dianchi(Changsha)

No abstract provided.

Innovative Hybrid Eor Formulations: Low Salinity Water Coupled With Nanoparticles And Nanopolymers For Carbonate Reservoirs, Aquib Azhar Hakeem

Thesis/ Dissertation Defenses

The recovery of oil from oil-wet carbonated reservoirs remains a challenge due to the unfavorable wettability characteristics and the poor sweep efficiency during the displacement process. In this work, the nano-assisted polymer flooding with Sav10 polymer and silica (SiO2), single-walled carbon nanotube (SWCNT), and titanium dioxide (TiO2) nanoparticles were investigated to enhance the oil recovery from the carbonate core samples at low-salinity conditions. The rheology analysis showed that a Sav10 concentration of 1000 ppm resulted in the most appropriate viscosity, around 3 cP, to effectively control mobility during flooding. The contact angle measurements of the individual nanoparticle dispersions and hybrid …

Photocatalysts Based On Titanium Dioxide And Zinc Phthalocyanine Composites For Photodegradation Of Methylene Blue, Albert R. Koldarov, Mastura Kh. Aripova, Odilzhon E. Abdurakhmonov, Zuhra Ch. Kadirova, Abror O. Tashpulatov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is to analyze the photocatalytic degradation of a model methylene blue solution using titanium dioxide composites with zinc phthalocyanine as the sensitizing photocatalyst under sunlight. The objects of the study are TiO₂-based photocatalysts derived from the spent catalyst of the Shurtan GCC after heat treatment at 650°C (T-650), as well as a composite containing zinc phthalocyanine (T-650/PcZn). It has been established that the photodegradation reaction follows a pseudo-first-order model, while the rate constant for the TiO₂/PcZn composite is significantly higher than that of pure TiO₂, indicating greater efficiency. The …

Magnetic Cellulose Nanocrystal Composites: Synthesis, Properties, Applications, And Opportunities, Mohammad Jahid Hasan, Kishore Chand, Esteban E. Ureña-Benavides, Erick S. Vasquez-Guardado

Chemical and Materials Engineering Faculty Publications

first_page settings Order Article Reprints Open AccessReview

Magnetic Cellulose Nanocrystal Composites: Synthesis, Properties, Applications, and Opportunities

Transport And Interfacial Dynamics Of Electrochemical Formation Processes In Li-Based Batteries, Penghao Zhang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Next-generation high-capacity batteries often rely on electrochemical formation processes rather than conventional intercalation alone. Such processes include lithium metal deposition and Li–O2 discharge-product formation, in which new phases form at the electrochemical interface during operation. As a result, the measured response reflects both electrochemical driving forces and the evolving product morphology. This coupling makes it difficult to interpret electrochemical data, microscopic observations, or model results in isolation. This dissertation examines this problem through three main studies and one preliminary extension on Li–O2 batteries and lithium metal deposition, each addressing a different factor that affects how electrochemical product formation is measured, …

Integrasi Metodologi Hazop Dalam Pengendalian Risiko Dan Keberlanjutan Operasional Pada Unit Pemulihan Urea: Studi Kasus Pada Industri Pupuk, Riny Yolandha Parapat, Arin Nur'aini Putri, Aryasatya Ramadhan Sukresno

National Journal of Occupational Health and Safety

The fertilizer industry is one of the chemical sectors with high-risk potential due to its operational processes involving hazardous materials as well as extreme pressure and temperature conditions. This study aims to identify and analyze hazards in the urea recovery unit using the Hazard and Operability Study (HAZOP) method, while also formulating effective risk control strategies to support the operational sustainability of the plant. The study was conducted directly at a commercial fertilizer plant in West Java using a semi-quantitative approach, which included field observations, review of technical documents such as Process Flow Diagrams (PFD), Piping and Instrumentation Diagrams (P&ID), …

Rheological Protocol To Assess And Optimize Latex Coagulation Dynamics For The Thin Glove Coagulant Dipping Process, Monday U. Okoronkwo, Kok Kong Ng, Wolfram Franke, Gaurav Sant

Chemical and Biochemical Engineering Faculty Research & Creative Works

Many products that directly impact the quality of human life today — gloves, catheters, condoms, and baby bottle teats — are made through the latex-dipping technology. While a variety of methods have been developed – e.g., particle counting, turbidimetry, microscopy, and light scattering – which are suitable for studying the coagulation of latex at very low concentrations, much less work has focused on methods suitable for in-situ characterization of latex coagulation in concentrated solutions (e.g., as relevant to the dipping process). This paper presents a process-relevant rheological protocol for assessing and optimizing latex coagulation dynamics for the thin glove coagulant …

Optimizing Graphene Oxide In Self-Compacting Concrete: A Sustainable Nano-Material Strategy For Enhanced Durability And Structural Performance, Mohammed Shakeebulla Khan, Vijaya G. S

Journal of Sustainable Construction Materials and Technologies

In order to reduce the environmental impact of the constructed world, advanced and sustainable construction materials are needed. This work is a summary of the comprehensive study on a novel self-compacting concrete with nano-engineered material (graphene oxide) modified self-compacting concrete (GO-SCC). The optimum dosage of GO was determined using Taguchi method, Analysis of Variance (ANOVA) and Response Surface Methodology (RSM) multi-objective statistical optimization method, and was found to be 0.10% by weight of cement (bwoc). This dosage of 0.10% GO led to the overall desirability score of 0.87, which confirmed that this was the optimum dosage for six response variables …