Industrial Technology Commons^™

Evaluation Of A Bulge Reduction Technology For Corrugated Fiberboard Containers Under Static Compression, Daan Peleman, Jay Singh, Koushik Saha, Soma Roy

Industrial Technology and Packaging

This research examines the effect of top-to-bottom static compression load on the bulge of RSC containers. The study compares a control regular slotted container (RSC) constructed with corrugated fiberboard to tape-reinforced designs. The bulge reduction, achieved using various tape placements and conditioning environments, were measured. Currently, no research on the effect of reinforcement tape towards reduction in the out-of-plane displacement (bulging) of the corrugated fiberboard panels has been undertaken. Samples related to four different container designs, varying by presence, quantity and the position of the reinforcement tape on the vertical panels, were tested and analyzed. The study involved the use …

Influence Of Fiberboard Container Design On Compression Bulge Displacement, Koushik Saha, Shane Messner, John Dizon, Nirav Chhajed, Jay Singh

Industrial Technology and Packaging

Bulge effect is the out-of-plane displacement of a panel of a corrugated fiberboard box from its original position. This bulge effect often is the result of excessive weight being placed on a box that rests at the bottom of a palletized load. Panels that are out-of-plane reduce the stacking strength of the box and can result in damage to products inside the containers. This study was designed to find the influence of fiberboard container design on its bulging performance when under compression. The objective of the study was to determine if change in height of a regular slotted container will …

Implications Of Variability Of Electromyographic Measurements For Assessing Localized Muscle Fatigue, Hamad Nasser Alasim

Graduate Theses, Dissertations, and Problem Reports (ETD)

The impact of work-related musculoskeletal disorders (WMSDs) is enormous due to a combination of direct and indirect costs associated with healthcare, lost workdays and human suffering. Because of the established relationship between Localized Muscle Fatigue (LMF) development and WMSDs, and in order to reduce and/or prevent WMSDs in workplaces, different fatigue assessment methods have been developed. Surface Electromyography (SEMG) is a commonly used LMF assessment technique. The SEMG signals are typically analyzed in time and frequency domains to predict LMF based on a relative change with respect to initial, or under no-fatigue conditions. Quantifying such change, however, relies on the …

Understanding And Measuring Net Positive Business Strategies, Luke Ruffner Robinson

Graduate Student Theses, Dissertations, & Professional Papers

Despite their attempts to mitigate ecological impacts through sustainability initiatives, businesses are a major cause of the world's ecological problems. Some progressive businesses are attempting to move beyond “net zero” in terms of achieving neutral environmental impacts and instead are now pursuing a goal of net positive. Net positive refers to the idea that business activities could contribute value-added benefits to earth’s ecological systems, for example, by using technologies that sequester and store carbon. However, except for a handful of high-profile corporate case studies, little is known about how companies are developing their strategies to become net positive and …

The Effect Of Cutting Condition Selection On Tool Life In Sand Milling, Craig Ertl

Dissertations and Theses @ UNI

This study was completed to address the problem of determining what effect selected cutting conditions have on tool wear and tool life in robotic sand milling (RSM) operations. The purpose of this study was to analyze the tool wear mechanisms and characteristics that govern the RSM process. The purpose was also to establish an experimental methodology that may be used in future studies to assess tool life when examining various tooling materials and designs, as well as additional sand workpiece materials. Completing this research allowed the machining process to be optimized by analyzing differences in tooling cost with variable values …

Design And Development Of A Perfusion Bioreactor With Internal Volume Expansion And Cell Retention For Cell And Gene Therapy Manufacturing, Corinna Doris

KGI Theses and Dissertations

Economically producing patient-specific cell therapies at commercial levels remains a challenge as it requires manufacturing separate batches per patient where the production system must be scaled-out rather than scaled-up to supply more patient doses. The resulting high production cost and consequent price-point can limit patient access. Specifically, the current cell expansion processes are highly manual and laborious, with the number and complexity of operations and components increasing the opportunities for failure and contamination. This work therefore aims to design a mechanically simple bioreactor that is better suited for scale-out by consolidating the cell expansion process to fewer components, vessels, and …

Space Optimization And Process Improvement, Harith Alshareef

Senior Design Project For Engineers

Siemens Energy warehouse located in Suwanee, GA runs out of space in the Precision Lab due to rapid growth, seasonal peaks, and poor space utilization. The objective of the project is to redesign the Precision Lab layout and improve the tool assessment process to increase efficiency, productivity, and profitability.

The first solution is to add shelves in the Precision lab as well as the Torque lab and reduce the honeycombing effect on the shelves, which results in a 120%-150% increase in the storage space. We propose adding Tablets that include barcode scanner features to reduce the time spent on the …

Evaluating The Resiliency Of Industrial Internet Of Things Process Control Using Protocol Agnostic Attacks, Hector L. Roldan

Theses and Dissertations

Improving and defending our nation's critical infrastructure has been a challenge for quite some time. A malfunctioning or stoppage of any one of these systems could result in hazardous conditions on its supporting populace leading to widespread damage, injury, and even death. The protection of such systems has been mandated by the Office of the President of the United States of America in Presidential Policy Directive Order 21. Current research now focuses on securing and improving the management and efficiency of Industrial Control Systems (ICS). IIoT promises a solution in enhancement of efficiency in ICS. However, the presence of IIoT …

Contributions Of Role-Playing Games: Advantages Of Incorporating Social Media In Disaster Response, Erin Mullin

Graduate Theses and Dissertations

After a disaster, emergency managers need to know who needs help, what type of help they need, and how soon they need it. Traditionally, they have relied on 911 calls and ground assessments to collect this information. Because the needs of a population are not able to be identified in a timely manner by ground assessments and because individuals are often unable to get through to 911, many civilians in distress turn to social media outlets as a last-ditch effort to obtain the services they need. Due to the uncertainty concerning the accuracy of social media posts, responding to disaster …

The Business Case For Industrial Safety: Revealing The Comprehensive Value Of Ergonomic Investments For Manufacturing Enterprises In Industry 4.0, Shane Stan

Honors Program: Senior Projects (Public)

How can today’s manufacturing enterprises construct, implement, and optimize modern safety initiatives in a manner that will present maximum return on investment and facilitate enterprise growth? Furthermore, how can these manufacturers assure individual ergonomic investments become part of a larger strategy to facilitate organizational change in safety? This work addresses these questions by placing industrial ergonomics in a business improvement context which comprehensively presents the financial returns and growth opportunities poised by modern safety initiatives. Additionally, to further strengthen the business case for industrial safety, an ergonomic action planning framework is established to guide the creation of holistic safety programs …

Generalized Relay Network Design And Collaborative Dispatching In Truckload Transportation, Amin Ziaeifar

Operations Research and Engineering Management Theses and Dissertations

The truckload industry faces a serious problem of high driver shortage and turnover rate which is typically around 100\%. Among the major causes of this problem are extended on-the-road times where drivers handle several truckload pickup and deliveries successively; non-regular schedules and get-home rates; and low utilization of drivers dedicated time. These are by-and-large consequences of the driver-to-load dispatching method, which is based on point-to-point dispatching or direct shipment from origin-to-destination, commonly employed in the industry. In this dissertation, we consider an alternative dispatching method that necessitates careful design of an underlying network. In this scheme, a truckload on its …

Design And Validation Of A Modular Instrument To Measure Torque And Energy Consumption In Industrial Operations, Mary De La Cruz, Ramiro Gonzalez, Jesus A. Gomez, Atilano Mendoza, Javier A. Ortega

Mechanical Engineering Faculty Publications

A modular torque measuring instrument capable of performing tapping torque tests (TTT) according to the ASTM D-5619 standard was designed, developed, and validated. With this new instrument, the performance of different lubricants can be evaluated in terms of frictional torque and energy consumption during tapping processes. This instrument can adapt onto any conventional milling machine or CNC machine and operate under various machining operations such as tapping, drilling, and other processes. To validate the design and performance of this new device, three commercially available lubricants were evaluated. From the three tested conditions, the results showed good repeatability, with consistent results …

Toolpath Planning Methodology For Multi-Gantry Fused Filament Fabrication 3d Printing, Hieu Trung Bui

Graduate Theses and Dissertations

Additive manufacturing (AM) has revolutionized the way industries manufacture and prototype products. Fused filament fabrication (FFF) is one of the most popular processes in AM as it is inexpensive, requires low maintenance, and has high material utilization. However, the biggest drawback that prevents FFF printing from being widely implemented in large-scale production is the cycle time. The most practical approach is to allow multiple collaborating printheads to work simultaneously on different parts of the same object. However, little research has been introduced to support the aforementioned approach. Hence a new toolpath planning methodology is proposed in this paper. The objectives …

Automatic Methods To Enhance The Quality Of Colonoscopy Video, Nidhal Kareem Shukur Azawi

Graduate Theses and Dissertations

Colonoscopy is a form of endoscopy because it uses colonoscopy device to help the doctor to understand a colon patient. Enhancing the quality of Colonoscopy images is a challenge because of the wet and dynamic environment inside the colon causes many problems even the colonoscope devise has a good quality. Some of these problems are blurriness, specular highlights shiny areas.

In this work, different kinds of techniques have been investigated in order to improve the quality of colonoscopy images. Also, variety of preprocessing approaches (removing bad images, resizing images, median filtration with and without image resizing) have been conducted to …

Minimodal: Dimensional Domain Of Miniature Shipping Containers For Intermodal Freight Transportation, Lee Stapley

Ursidae: The Undergraduate Research Journal at the University of Northern Colorado

This study explores the feasibility of miniature shipping container usage within existing intermodal transportation (IT) supply chains. Smaller intermodal container shipments may help realign freight shipments with the most efficient transportation mode, rail. These containers embolden the dimensional domain (DD) of shipping. The shipping container dimensional domain (container size variation and modal fluidity) is widespread and results in shipments that are often larger or more infrequent than needed. The DD impacts transport mode, shipping frequency, shipment velocity, intermodal supply chain accessibility, and regional shipping networks. This study suggests that container size impacts the DD and, therefore, mode choice. As miniature …

Keeping Humans In The Loop: Pooling Knowledge Through Artificial Swarm Intelligence To Improve Business Decision Making, Lynn E. Metcalf, David A. Askay, Louis B. Rosenberg

Industrial Technology and Packaging

This article explores how a collaboration technology called Artificial Swarm Intelligence (ASI) addresses the limitations associated with group decision making, amplifies the intelligence of human groups, and facilitates better business decisions. It demonstrates of how ASI has been used by businesses to harness the diverse perspectives that individual participants bring to groups and to facilitate convergence upon decisions. It advances the understanding of how artificial intelligence (AI) can be used to enhance, rather than replace, teams as they collaborate to make business decisions.

Application Of Big Data Analytics In Agriculture Supply Chain Management, Sankara Narayanan Mangalam Ananthapadmanabhan

Master's Theses

The increasing trend in frequency of natural disasters in tandem with globalization of business makes the agricultural supply chain significantly vulnerable to disruption. This thesis presents a pragmatic approach for creating a Business Continuity Model that can notify supply chain planners when there is an increase in risk of agriculture supply chain disruption due to natural disasters. The methodology presented in this thesis applied big data analytics and machine learning algorithms along with agriculture product related exponential decay function to create a regionalized composite risk score, that incorporated both direct and indirect risk associated with the Agriculture Fresh Supply Chain. …

Amplifying The Collective Intelligence Of Teams With Swarm Ai, David Askay, Lynn E. Metcalf, Louis B. Rosenberg, Gregg Willcox, David Baltaxe

Industrial Technology and Packaging

Group decision-making is strengthened by the varied knowledge and perspectives that each member brings, yet teams often fail to capitalize on their diversity. This paper describes how Swarm AI, a novel collaborative intelligence technology modeled on the decision-making process of honey bee swarms, enables networked human groups to more effectively leverage their combined insights. Through an empirical study conducted on 60 small teams, each of 3 to 6 members, we demonstrate the capacity of Swarm AI to significantly amplify the collective intelligence of human groups. A well-known testing instrument—the Reading the Mind in the Eyes (RME) test —was used to …

Design And Implementation Of An Automated Oil Distribution System For A Homogenizer Machine In Gea Mechanical Equipment – Niro Soavi, Luca Gandolfi

Theses

This thesis shows the steps that have been followed and done in order to improve a critical operation of a technological process of the GEA Mechanical Equipment. The critical operation was the filling with different types of oils the homogenizing machine because it was characterized by a lot of inefficiencies and, in particular, by huge risks for job security. These critical issues gave the opportunity and the chance to realize a project in order to give a process optimization and security improvement.

After having faced all the aspects and steps needed for this project, it has been realized a system …

Modeling Of Complex Parts For Industrial Waterjet Cleaning, Braden James

Graduate Theses and Dissertations

Industrial high-pressure waterjet cleaning is common to many industries. The modeling in this paper functions inside a collaborative robotic framework for high mix, low volume processes where human robot collaboration is beneficial. Automation of pressure washing is desirable for economic and ergonomic reasons. An automated cleaning system needs path simulation and analysis to give the operator insight into the predicted cleaning performance of the system. In this paper, ablation, the removal of a substrate coating by waterjet, is modeled for robotic cleaning operations. The model is designed to work with complex parts often found in spray cleaning operations, namely parts …