Industrial Engineering Commons^™

Risk Mitigation In The Supply Chain Caused By Multitple Phase-In And Phase-Out Components Using Simio Simulation, Anabel Renteria Marquez

Open Access Theses & Dissertations

Manufacturing is constantly changing, adapting to new technologies and making improvements on their products design, while dealing with engineering design changes can represent an improvement or savings to the company it can also end up as a huge risk of disruption in the Supply Chain if there is not a safety phase-in and phase-out components transition because the network became more complex and affected processes needs to be revalidated, here comes the importance to set up an strategy to mitigate any possible risk and maximize total revenue.

A case study for a two tiers level Supply Chain system is evaluated …

Weighting Policies For Robust Unsupervised Ensemble Learning, Ramazan Unlu

Electronic Theses and Dissertations

The unsupervised ensemble learning, or consensus clustering, consists of finding the optimal com- bination strategy of individual partitions that is robust in comparison to the selection of an algorithmic clustering pool. Despite its strong properties, this approach assigns the same weight to the contribution of each clustering to the final solution. We propose a weighting policy for this problem that is based on internal clustering quality measures and compare against other modern approaches. Results on publicly available datasets show that weights can significantly improve the accuracy performance while retaining the robust properties. Since the issue of determining an appropriate number …

Space Utilisation Strategy For Thailand Underground Transit Station. A Case Study Of Thailand Cultural Centre Underground Station, Wirasinee Tongsoo

Chulalongkorn University Theses and Dissertations (Chula ETD)

The ridership of Thailand underground station continuously increases every year. On the other hand, space management of terminal of underground station does not success as expected. The main reason is space does not have strategy to handle. majority of renter rarely stay until the completion of the rental contract, and they prefer to break the contract, pay the fine and move business elsewhere. According to research, there is no research study about this for Thailand underground station. In order to create appreciate plan for Thailand underground station in 2022. The strategy is core to integrate plan. Passengers would be attracted …

Condition Assessment Of End-Of-Use Products For Remanufacturing, Jovan Morgan

Research Opportunities for Engineering Undergraduates (ROEU) Program 2016-17

The goal of the project is to use the automated 3-D laser scanner using a Capnut as a test object to detect surface defects, corrosion and calculation error through offline quality inspection. potentially reducing labor time and cost for both consumers and manufacturers.

Reusable Medical Equipment Inventory Assessment At A Detroit Medical Center, Tannaz Khaleghi

Wayne State University Theses

In recent years an outstanding growth has been observed in utilizing various medical devices due to growing demand. When both the quantity and quality into account, the price of medical devices becomes a critical factor to maintain cost/profit balances in financial systems. As a result healthcare systems should put more emphasis on how many of the trays they buy and store as their inventory due to high costs. Adequate levels of reusable medical equipment (RME) inventory is crucial for many healthcare systems

due to the RME equipment being expensive. On the other, the RME availability for vital departments such as …

Conceptual Design Process Improvement For Drainage Systemusing Project Management, Wantanee Kongpanya

Chulalongkorn University Theses and Dissertations (Chula ETD)

The major concern in the architecture, engineering, and construction (AEC) industry is time, cost, and quality. The design for industrial building project usually complex, particularly in a field of mechanical and piping process due to the large involvement of project stakeholders. The case company, which is the specialist supplier of industrial piping solution in Thailand, reported the issue of redesigns regarding to their poor project management of conceptual design process in construction project that effect to their work performance and customer satisfaction. Thus, the purpose of this study was to improve the process of conceptual design using project management concept …

Human-Machine Interface Development For Modifying Driver Lane Change Behavior In Manual, Automated, And Shared Control Automated Driving, Walter Joseph Talamonti

Wayne State University Dissertations

Rear-end crashes are common on U.S. roads. Driver assistance and automated driving technologies can reduce rear-end crashes (among other crash types as well). Braking is assumed for forward collision warning (FCW) and automatic emergency braking (AEB) systems. Braking is also used for adaptive cruise control (ACC) and in automated driving systems more generally. However, steering may be advised in an emergency if the adjacent lane is clear and braking is unlikely to avoid a collision. Steering around an obstacle when feasible also eliminates the risk of becoming the new forward collision hazard. Driver assist technology like emergency steer assist (ESA) …

Quality By Design Procedure For Continuous Pharmaceutical Manufacturing: An Integrated Flowsheet Model Approach, Ashley Vezina

Electronic Theses and Dissertations

Pharmaceutical manufacturing is crucial to global healthcare and requires a higher, more consistent level of quality than any other industry. Yet, the traditional pharmaceutical batch manufacturing has remained largely unchanged in the last fifty years due to high R&D costs, shorter patent durations, and regulatory uncertainty. This has led regulatory bodies to promote modernization of manufacturing process to continuous pharmaceutical manufacturing (CPM) by introducing new methodologies including quality by design, design space, and process analytical technology (PAT). This represents a shift away from the traditional pharmaceutical manufacturing way of thinking towards a risk based approach that promotes increased product and …

Fire Safety And Emergency Evacuation Training For Occupants Of Building Using 3d Virtual Simulation, Sayli Bhide

Electronic Theses and Dissertations

With advancement in technology, building structures are becoming bigger and more complex. Incidences of horrifying fires that occur in such complex structures resulting in loss of property as well as lives are recorded worldwide. Emergency evacuation training can play a crucial role in mitigating damage not only in cases of fire, explosion or chemical spill but also in cases of natural calamities like floods and hurricanes. Conventional safety training provided in industries mostly comprises of unidirectional flow of information. Due to this passive learning style, response of employees in real life emergency situations is known to be ineffective. The proposed …

An Sos Conceptual Model, Lvc Simulation Framework, And A Prototypical Implementation Of Unmanned System Interventions For Nuclear Power Plant Disaster Preparedness, Response, And Mitigation, Matthew Davis

Electronic Theses and Dissertations

Nuclear power plant disasters can have severe and far-reaching consequences, thus emergency managers and first responders from utility owners to the DoD must be prepared to respond to and mitigate effects protecting the public and environment from further damage. Rapidly emerging unmanned systems promise significant improvement in response and mitigation of nuclear disasters. Models and simulations (M&S) may play a significant role in improving readiness and reducing risks through its use in planning, analysis, preparation training, and mitigation rehearsal for a wide spectrum of derivate scenarios. Legacy nuclear reactor M&S lack interoperability between themselves and avatar or agent-based simulations of …

Adaptive Scheduling For Operating Room Management, Honghan Ye

Theses and Dissertations--Mechanical and Aerospace Engineering

The perioperative process in hospitals can be modelled as a 3-stage no-wait flow shop. The utilization of OR units and the average waiting time of patients are related to makespan and total completion time, respectively. However, minimizations of makespan and total completion time are NP-hard and NP-complete. Consequently, achieving good effectiveness and efficiency is a challenge in no-wait flow shop scheduling. The average idle time (AIT) and current and future idle time (CFI) heuristics are proposed to minimize makespan and total completion time, respectively. To improve effectiveness, current idle times and future idle times are taken into consideration …

Analytical And Boundary Element Solutions Of Bulk Reacting Lined Ducts And Parallel-Baffle Silencers, Jundong Li

Theses and Dissertations--Mechanical and Aerospace Engineering

Lined silencers of various configurations are used to attenuate the noise from building HVAC equipment, gas turbines, and other machinery. First-mode analytical solutions are presented for sound attenuation along rectangular lined ducts, parallel-baffle silencers, and circular lined ducts. The sound absorptive lining is treated using a bulk property model. The analytical solutions entail solving a nonlinear characteristic equation in the transverse direction after the rigid-wall boundary condition is applied. The solution is compared to the boundary element solution and a local impedance analytical solution for several test cases.

An Efficient Heuristic To Balance Trade-Offs Between Utilization And Patient Flowtime In Operating Room Management, Feidi Dang

Theses and Dissertations--Mechanical and Aerospace Engineering

Balancing trade-offs between production cost and holding cost is critical for production and operations management. Utilization of an operating room affects production cost, which relates to makespan, and patient flowtime affects holding cost. There are trade-offs between two objectives, to minimize makespan and to minimize flowtime. However, most existing constructive heuristics focus only on single-objective optimization. In the current literature, NEH is the best constructive heuristic to minimize makespan, and LR heuristic is the best to minimize flowtime. In this thesis, we propose a current and future deviation (CFD) heuristic to balance trade-offs between makespan and flowtime minimizations. Based on …

Investigating The Impact Of Levels Of Experience On Workload During Nuclear Power Plant Operations, Jonathan Harris

Electronic Theses and Dissertations

The human-machine interface (HMI) of a Nuclear Power Plant (NPP) Main Control Room (MCR) is complex. Understanding HMI factors that influence Reactor Operator (RO) performance and workload when controlling an NPP is important. The Nuclear Regulatory Commission (NRC) began a program of research known as the Human Performance Test Facility (HPTF) with the goal of collecting human performance data to better understand cognitive and physical elements that support safe control room operation. The HPTF team developed an experimental methodology to evaluate workload using perceived ratings, performance measures, and physiological correlates. This methodology focuses on tasks commonly performed during operations in …

Design Of A Framework For Sharing And Generating Combat Damage Assessment(Cda) Of A Hla/Rti Federation, Hongseon Park

Electronic Theses and Dissertations

In this paper, a new framework for sharing Combat Damage Assessment(CDA) is proposed to find out the differences of each CDA system between military combat units belonging to their own federate in a HLA/RTI federation. When there are engagements in a battle among combat units belonging to their own federate in the HLA/RTI federation, each result of damage assessments is very different. This affects the HLA/RTI federation’s confidence and needed to be overcome because it is also one of the major issues to generate reliable engagement data. Also, a RTI can generate only qualitative data about combat damage while quantitative …

A Framework For Lean Transformation In Developing Countries: The Case Of Saudi Arabian Industry, Murad Andejany

Electronic Theses and Dissertations

Lean is a dynamic, knowledge-driven, and customer focused philosophy that continuously eradicates waste and generates value, with a goal to improve a company's productivity, efficiency, and quality. Successful implementation of lean does not only offer cost reduction and improved quality and productivity, but also provides efficient guidance for organizations to attain significant and continued growth. Although its adoption by companies has proven successful in developed countries, there is no sufficient evidence of its successful implementation in developing countries such as Saudi Arabia. A review of the literature indicates that there is a need to study lean transformation in developing countries …

Dynamic Job-Shop Scheduling Program (Djsp) Analysis For Preventive Military Helicopter Maintenance System (Pms), Kyungjin Park

Electronic Theses and Dissertations

Republic of Korea Army(ROKA) has been founding new attack helicopter troops since last year by adopting US main attack helicopter, AH-64E Apache, and peripheral system like pilots and mechanics training systems and their organization. The AH-64E Apache is a major attack helicopter of the US Army and all of its systems are verified in terms of the effectiveness in real operations for several decades. However, ROKA still needs their own version of systems including tactics, template, and maintenance which are suitable for Korean terrain, climate, personnel, and so on. At least ROKA needs to have a chance to verify that …

A Cubesat Communication System Development For Gto Mission, Ashiqur Rahman

Open Access Theses & Dissertations

Tracking, telemetry and command (TT&C) systems on traditional small satellites have advanced significantly in last few decades. The capabilities, requirements and expectations of the communication system have been increased significantly for the smaller satellites. Small satellites are now performing the tasks near to the bigger satellites which increases the dependency on the communication system in terms of reliability and data management. This Thesis paper will focus on development of the communication system of a 1U cube Satellite named Orbital Factory II (OFII). The satellite will be launched into a geostationary transfer orbit (GTO) onboard a United Launch Alliance (ULA) Atlas …

Models For The Residual Life Of Railroad Bearing Grease In Laboratory And Industry Applications, Douglas Timmer, Constantine Tarawneh, Robert Jones

Manufacturing & Industrial Engineering Faculty Publications

Adequate lubrication in railroad bearings is crucial to the safe operation of these components. An investigation of the residual life of railroad bearing grease was conducted in a laboratory setting. The data was collected using a split-split-plot design of experiments. The Oxidation Induction Time (OIT), which is the time required for the remaining antioxidants in a sample of grease to be consumed in a test, is the response variable for this study. Low values of OIT indicate small remaining amounts of antioxidants in the grease and thus small remaining residual life in the grease. OIT measurements were made using differential …

การวิเคราะห์รูปแบบการพัฒนา และการระบุความสำคัญของสถานีในเครือข่ายขนส่งมวลชนทางรางในกรุงเทพมหานคร, พิชญา ณ บางช้าง

Chulalongkorn University Theses and Dissertations (Chula ETD)

เครือข่ายขนส่งมวลชนทางรางในกรุงเทพมหานครเป็นเครือข่ายขนส่งมวลชนทางรางในเมืองเครือข่ายแรกของประเทศไทย ซึ่งในปี พ.ศ. 2572 เครือข่ายดังกล่าวจะมีจำนวนสถานีทั้งหมด 285 สถานี และจะเป็นหนึ่งในเครือข่ายขนส่งมวลชนทางรางที่มีขนาดใหญ่ติด 5 อันดับแรกของโลก ในงานวิจัยนี้ผู้วิจัยได้ทำการศึกษารูปแบบการพัฒนาของเครือข่ายดังกล่าวตั้งแต่เปิดให้บริการในปี พ.ศ. 2542 จนถึง พ.ศ. 2572 ในทุกลำดับการขยายผ่านทฤษฎีเครือข่ายซับซ้อน โดยอาศัยตัวชี้วัดเครือข่ายทั้งหมด 7 ชนิดในการอธิบายปรากฎการณ์ที่เกิดขึ้นจากรูปแบบการพัฒนาเครือข่ายในช่วงเวลาดังกล่าว นอกจากนี้ผู้วิจัยยังได้ทำการพัฒนาตัวชี้วัดรวบยอดเชิงประสิทธิภาพเครือข่าย และเชิงการเป็นจุดแพร่กระจายผลกระทบ เพื่อระบุสถานีที่มีความสำคัญ ซึ่งสามารถนำไปใช้ในการเสริมสร้างความแข็งแรงให้กับเครือข่ายในอนาคตได้ จากผลการวิจัยพบว่า ตัวชี้วัดระดับเครือข่ายโดยภาพรวม อันประกอบไปด้วย ค่าเส้นผ่านศูนย์กลางเครือข่าย ดัชนีแกมมา และค่าเอนโทรปีมาตรฐานของเครือข่าย มีแนวโน้มเพิ่มขึ้น และมีค่าเฉลี่ยของค่าความเป็นศูนย์กลาง Degree อยู่ในช่วง [1.91,2.27] สถานีที่มีค่าความเป็นศูนย์กลาง Closeness สูงมักอยู่บริเวณกึ่งกลางของเครือข่าย ในขณะที่สถานีที่มีค่าความเป็นศูนย์กลาง Betweenness สูงมักอยู่บนเส้นทางรัศมีที่เชื่อมต่อระหว่างกึ่งกลางเมืองและชานเมือง สำหรับผลจากตัวชี้วัดรวบยอดที่ใช้เพื่อระบุความสำคัญของสถานีนั้น พบว่าสถานีที่มีความสำคัญเชิงประสิทธิภาพเครือข่ายสูงมักจะอยู่บริเวณสถานีที่มีค่า Degree สูง และเน้นไปในเส้นทางที่เป็นทางผ่านระหว่างจุดเชื่อมต่อออกไปทางชานเมือง โดยมีการกระจายอยู่หลายจุดทั่วทั้งเครือข่าย ในขณะที่สถานีที่มีความสำคัญเชิงการเป็นจุดแพร่กระจายผลกระทบสูงมักอยู่บริเวณใดบริเวณหนึ่งของเครือข่ายเพียงเท่านั้น