Industrial Engineering Commons^™

Profile Interview With Vincent Duffy, Apoorva Sulakhe

Purdue Journal of Service-Learning and International Engagement

Dr. Vincent Duffy is an associate professor in the Department of Industrial Engineering at Purdue University holding a joint appointment with Agricultural and Biological Engineering. Duffy focuses on human factors engineering and ergonomic design. His interest in teaching began early when he was a teaching assistant for IE 386 at Purdue University while pursuing his master’s degree. As an industrial engineering master’s non-thesis student, Duffy realized he had a natural inclination toward teaching. This motivation, along with the support and mentorship of Ferdinand Leimkuhler, the head of the department, turned him toward the fi eld of research. He rejoined Purdue …

Appointment Planning And Scheduling In Primary Care, Babak Hoseini

Dissertations

The Affordable Care Act (ACA) puts greater emphasis on disease prevention and better quality of care; as a result, primary care is becoming a vital component in the health care system. However, long waits for the next available appointments and delays in doctors offices combined with no-shows and late cancellations have resulted in low efficiency and high costs.

This dissertation develops an innovative stochastic model for patient planning and scheduling in order to reduce patients’ waiting time and optimize primary care providers’ utility. In order to facilitate access to patients who request a same-day appointment, a new appointment system is …

Quantitative Analysis Of Regenerative Energy In Electric Rail Traction Systems, Mahmoud Saleh, Oindrilla Dutta, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper aims at determining the influential factors affecting regenerative braking energy in DC rail transit systems. This has been achieved by quantitatively evaluating the dependence of regenerative energy on various parameters, such as vehicle dynamics, train scheduling, ground inclination and efficiency of the electrical devices. The recuperated power and energy have been presented by a mathematical model, comprising of a set of empirical forms, which allows for thorough analysis. A detailed simulation model of a typical DC-traction system has been developed to validate the developed empirical forms. The results verified the validity of the proposed mathematical model, and demonstrated …

Identification Of Reverse Engineering Candidates Utilizing Machine Learning And Aircraft Cannibalization Data, Marc Banghart

International Journal of Aviation, Aeronautics, and Aerospace

As military aircraft continue to remain in service and age, cannibalization of parts is increasing. Proactive identification of parts that are at high risk for cannibalization will inform engineering processes such as reverse engineering, thus allowing potentially reducing lead time to develop new parts. The research objective was to develop a causal structure that can be used for prediction of when cannibalization actions may occur. Bayesian networks allow encoding of causality between various descriptive features given a data set. The method utilized a tabu search algorithm, identified the underlying causal structure and the associated node probabilities. The method is then …

Utilizing Functional Near-Infrared Spectroscopy For Prediction Of Cognitive Workload In Noisy Work Environments, Ryan Gabbard, Mary E. Fendley, Irfaan A. Dar, Rik Warren, Nasser H. Kashou

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Occupational noise frequently occurs in the work environment in military intelligence, surveillance, and reconnaissance operations. This impacts cognitive performance by acting as a stressor, potentially interfering with the analysts’ decision-making process. We investigated the effects of different noise stimuli on analysts’ performance and workload in anomaly detection by simulating a noisy work environment. We utilized functional near-infrared spectroscopy (fNIRS) to quantify oxy-hemoglobin (HbO) and deoxy-hemoglobin concentration changes in the prefrontal cortex (PFC), as well as behavioral measures, which include eye tracking, reaction time, and accuracy rate. We hypothesized that noisy environments would have a negative effect on the participant in …

Process Management And Design Layout Of High Throughput Screening, Anthony Vasquez, Kyle Dupuy

Industrial and Manufacturing Engineering

Calibr is a pharmaceutical company in San Diego and growing very quickly rate and need help redesigning their lab layout and in doing so reducing their cycle times and down times in machines. In addition to this, they do not currently have an accurate measurement of how long their processes take in an overall cycle. The objective of this project is to provide Calibr with a redesigned layout to accommodate new equipment as well as a software tool that can output Gantt charts for their planning of their testing. Our approach to this project first included mapping out the facilities …

Implementation Of A Multi-Criteria Decision Analysis (Mcda) Toolkit To Aid In Ranking Naval Mission Vessel Combinations With Uncertainty, Andrew R. Miller

Engineering Management & Systems Engineering Theses & Dissertations

United States (U.S.) military bases have largely been constructed outside of the contiguous United States (OCONUS) due to the need of close support logistics for conflicts and wars. In contrast, military bases within the contiguous United States (CONUS) have been constructed mostly due to economic and other related monetary factors. In addition to monetary concerns for the placement of military bases (specifically naval bases), there exists tactical, environmental, cultural, climate, logistical, and geographical issues that need to be fully considered before deciding on a naval installation location and the vessels to be stationed there. I will present a new toolkit …

Macrodamage Accumulation Model For A Human Femur, Farah Hamandi, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

The objective of this study was to more fully understand the mechanical behavior of bone tissue that is important to find an alternative material to be used as an implant and to develop an accurate model to predict the fracture of the bone. Predicting and preventing bone failure is an important area in orthopaedics. In this paper, the macrodamage accumulation models in the bone tissue have been investigated. Phenomenological models for bone damage have been discussed in detail. In addition, 3D finite element model of the femur prepared from imaging data with both cortical and trabecular structures is delineated using …

Split-Merge Model Of Workunit Replication In Distributed Computing, Alexander Rumyantsev, Srinivas R. Chakravarthy

Industrial & Manufacturing Engineering Presentations And Conference Materials

No abstract provided.

Adaptive Learning Pedagogy In Udl And Multi-Modal Training, Ziho Kang, Mattlyn R. Dragoo, Randa L. Shehab, Han Yuan, Lei Ding, Stephen G. West

National Training Aircraft Symposium (NTAS)

Currently, most learning methods are based on classroom teaching through unidirectional communication using boards or slides. However, the Universal Design for Learning (UDL) asserts that the students can increase their performance if the instructors can provide the students with diversified information representation, expression, and engagement means. Although UDL minimizes the mismatch between the teaching and learning styles, we lack the detailed methods to implement the UDL and its associated multi-modal training methods in the context of air traffic control candidates and/or technical operators. We propose an approach that adapts the Index of Learning Styles (ILS) based on four categories: perception, …

A Mixed Methods Study Of The Performance And Dynamics Of University Technology Transfer And Commercialization, Berk Dogan

LSU Master's Theses

The technology transfer and commercialization encompasses various activities involved in acquiring intellectual property rights for the inventions, marketing of the inventions, and diffusing into the public domain through commercialization. Although many scholars have studied technology transfer within the academic institutions' context, the process has been assumed to be sequential. The technology transfer process is a complex process to be generalized as a linear sequential process. A mixed methods approach has been used to triangulate the findings from the literature review and descriptive analyses to conceptualize an alternative model that reflects the actual process more accurately. It was found that the …

Predictive Power And Validity Of Connectome Predictive Modeling: A Replication And Extension, Michael Wang, Joaquin Goni, Enrico Amico

The Summer Undergraduate Research Fellowship (SURF) Symposium

Neuroimaging, particularly functional magnetic resonance imaging (fMRI), is a rapidly growing research area and has applications ranging from disease classification to understanding neural development. With new advancements in imaging technology, researchers must employ new techniques to accommodate the influx of high resolution data sets. Here, we replicate a new technique: connectome-based predictive modeling (CPM), which constructs a linear predictive model of brain connectivity and behavior. CPM’s advantages over classic machine learning techniques include its relative ease of implementation and transparency compared to “black box” opaqueness and complexity. Is this method efficient, powerful, and reliable in the prediction of behavioral measures …

Pilot Performance With Advance Sensor Technlogies Considerations, Erin R. Groll, Nsikak Udo-Imeh, Steven Landry Dr.

The Summer Undergraduate Research Fellowship (SURF) Symposium

Research on human performance indicates people may discretely shift modes as the difficulty in tasks changes. These modes are referred to as “cognitive control modes.” Cognitive control modes are ways people operate and handle their process of thinking during a series of tasks. However, past work has been confined to subjective reports of these mode changes - objective markers in data of cognitive control modes, which should appear if these mode changes are truly discrete, have not be identified. This work will attempt to identify markers of cognitive control modes in data collected on pilots flying instrument approaches. Specifically, a …

Essays In Measuring, Controlling, And Coordinating Supply Chain Inventory And Transportation Operations, Payam Parsa

Graduate Theses and Dissertations

Supply chain collaboration programs, such as continuous replenishment program (CRP), is among the most popular supply chain management practices. CRP is an arrangement between two partners in a supply chain to share information on a regular basis for lowering logistics costs while maintaining or increasing service levels. CRP shifts the replenishment responsibility to the upstream partner to avoid the bullwhip effect across the supply chain. This dissertation aims to quantify, measure, and expand the benefits of CRP for the purpose of reducing logistics cost and improving customer service. The developed models in this dissertation are all applied in different case …

An Economic Analysis Of Residential Photovoltaic Systems With And Without Energy Storage, Rodney Moses Kizito

Graduate Theses and Dissertations

Residential photovoltaic (PV) systems serve as a source of electricity generation that is separate from the traditional utilities. Investor investment into residential PV systems provides several financial benefits such as federal tax credit incentives for installation, net metering credit from excess generated electricity added back to the grid, and savings in price per kilowatt-hour (kWh) from the PV system generation versus the increasing conventional utility price per kWh. As much benefit as stand-alone PV systems present, the incorporation of energy storage yields even greater benefits. Energy storage (ES) is capable of storing unused PV provided energy from daytime periods of …

Models And Methodologies To Address Emerging Needs In Network And Supply Chain Optimization, Forough Enayaty Ahangar

Graduate Theses and Dissertations

In this dissertation, we model three different security scenarios and propose solution methodologies to address each problem.

Chapter 2 presents a large-scale optimization approach for solving a dynamic bi-level network interdiction problem (NIP) in which interdiction activities must be scheduled in order to minimize the cumulative maximum flow over a finite time horizon. A logic-based decomposition (LBD) approach is proposed that utilizes constraint programming to exploit the scheduling nature of this dynamic NIP. Chapter 3 considers a set of centers to which content (e.g., data or smuggled items), are assigned to ensure availability. An interdictor (e.g., border security officials) attempts …

Personalized Decision Modeling For Intervention And Prevention Of Cancers, Fan Wang

Graduate Theses and Dissertations

Personalized medicine has been utilized in all stages of cancer care in recent years, including the prevention, diagnosis, treatment and follow-up. Since prevention and early intervention are particularly crucial in reducing cancer mortalities, personalizing the corresponding strategies and decisions so as to provide the most appropriate or optimal medical services for different patients can greatly improve the current cancer control practices. This dissertation research performs an in-depth exploration of personalized decision modeling of cancer intervention and prevention problems. We investigate the patient-specific screening and vaccination strategies for breast cancer and the cancers related to human papillomavirus (HPV), representatively. Three popular …

Simulation Modeling Approach For Evaluating A Solution Designed To Alleviate The Congestion Of Passenger Flow At The Composure Area Of Security Checkpoints, Maria Luisa Janer Rubio

Graduate Theses and Dissertations

In a previous study, we found that replacing the exit roller of a security checkpoint lane for a continuously circulating conveyor could potentially increase the throughput of passengers by over 28% while maintaining the TSA security-waiting time limit (Janer and Rossetti 2016). This study intends to expand this previous effort by investigating the impact of this circulating conveyor on the secondary screening related processes. Leone and Liu (2011) found that imposing a limit on the x-ray screening time, and diverting any item exceeding this limit to secondary screening, could decrease the waiting time by 43%. Our objective is to verify …

Decision Support System For Container Port Selection Using Multiple-Objective Decision Analysis, Rivelino De Icaza

Graduate Theses and Dissertations

Ports are essential for maritime transportation and global supply chains since they are nodes that connect the sea- and land-based modes of transportation. With containerization and supply chains stimulating global trade, ports are challenged to adjust to changes in the market to create value to their customers. Therefore, this dissertation research focuses on the container port selection decision analysis to provide information to help shipping lines select the best port for their shipping networks. Since the problem is complex, dynamic, and involves multiple and conflicting criteria, the research proposes to use the multi-objective decision analysis with Value-Focused Thinking approach. The …

Decision Models For Fast-Fashion Supply And Stocking Problems In Internet Fulfillment Warehouses, Jingran Zhang

Dissertations

Internet technology is being widely used to transform all aspects of the modern supply chain. Specifically, accelerated product flows and wide spread information sharing across the supply chain have generated new sets of decision problems. This research addresses two such problems. The first focuses on fast fashion supply chains in which inventory and price are managed in real time to maximize retail cycle revenue. The second is concerned with explosive storage policies in Internet Fulfillment Warehouses (IFW).

Fashion products are characterized by short product life cycles and market success uncertainty. An unsuccessful product will often require multiple price discounts to …