Industrial Engineering Commons^™

Re-Evaluating Coverage Metrics For Wireless Sensor Network Border Security Applications, Kevin Haney

Industrial Engineering Undergraduate Honors Theses

Wireless sensor networks are an emerging technology used to monitor an environment over time. One specific application of the wireless sensor network is the border security application. Researchers have adapted coverage metrics from general wireless sensor network literature to fit the border security application. While some of the adapted metrics count the number of sensors detecting a potential target, others measure the distance between a potential target and its nearest sensor. No existing metric accounts for both of these factors. To take advantage of this gap and to attempt to increase the accuracy to which coverage is measured in this …

Gridhub: A Grid-Based, High-Density Material Handling System., Gang Hao

Electronic Theses and Dissertations

In the past twenty years, the share of e-commerce has increased (FRED, 2019). Since more and more activities, such as picking and sorting customers’ orders, are done in warehouses, high efficiency warehouses are in demand. Furthermore, the efficiency of warehouses is related to customer satisfaction (Colla and Lapoule, 2012). Storage systems are key components in warehouses, which are related to the efficiency of warehouse operations. In this dissertation, we address an automatic puzzle-based storage system under decentralized control. We call this system GridHub. GridHub meets standards of Industry 4.0 (Lasi et al., 2014), and it features high throughput with parallel …

A Machine Learning Approach For Allocating Route Cost To Customers For Transportation And Logistics Services., Alison Davis

Electronic Theses and Dissertations

Advancements in big data enabled management practices inspire logistics companies to study deeper into their transportation operations with a data driven approach. One such question asks: How can a logistics firm identify high-cost customers in their service network? In the presence of rich data on routes involving many customers, this thesis develops a framework to allocate a route cost among customers that the route serves, where each route is associated with multiple route features related to the transportation cost. Cost is allocated using the proportional allocation approach in combination with the random forest method in machine learning. First, this framework …

Effects Of Design Autonomy On The Flow Experience, Antonio F Coriano

Electronic Theses and Dissertations

Most modern workplace settings are laden with operating procedures aimed at standardizing action in the name of efficiency. The cost of this standardization is the autonomy of the operator. Mihaly Csikszentmihalyi stated the problem concisely in his 1975 work Beyond Boredom and Anxiety “… [M]ost of the institutions that take up our time…are organized around the assumption that serious work is grim and unpleasant. Because of this assumption, most of our time is spent doing unpleasant things”. An experiment was created to study and better understand how to redress this harmful situation. Sixteen subjects were given a SolidWorks computer-aided design …

Locating Emergency Shelters While Incorporating Spatial Factors, Justin Taylor

Graduate Theses and Dissertations

In the immediate response phase of a natural disaster, local governments and nonprofit agencies often establish shelters for affected populations. Decisions regarding at which locations to open shelters are made ad hoc based on available building inventory, and may result in high travel impedance to reach shelters and congestion. This thesis presents a shelter location optimization model based on the two-step floating catchment area (2SFCA) method. The 2SFCA method creates a shelter accessibility score for each areal unit (e.g., census block group) which represents the ability for persons in the unit to access shelter capacity with low travel impedance, relative …

Simulation Modeling Of Cross-Dock And Distribution Center Based Supply Chains, Ghewa Al Chall

Graduate Theses and Dissertations

Companies are implementing new strategies to meet the customer requirements in terms of quality, timing, and cost. One of these strategies is cross-docking, which can be defined as the process of consolidating the products coming from different suppliers, but having the same destination, with minimal handling and almost no storage between loading and unloading of the goods. The purpose of this research is to investigate the benefits of having a cross-docking facility in a supply chain. In this research, we focus on developing discrete event simulation models using the opensource Java Simulation Library (JSL). Also, we work on augmenting an …

Aerial Screw Vtol Rotorcraft, Macale Rielly, Alexa Culp, Thomas Osteen, Adeline Perry

Senior Design Project For Engineers

Known as the “Renaissance Man,” DaVinci’s impressive knowledge of mechanics and inventive prowess would influence engineers and innovators hundreds of years later to make human flight a reality. However, due to the limited capacity of engineering and manufacturing at the time, his invention had been shallowly investigated in a production setting. This project strove to properly acknowledge DaVinci’s invention by thorough examination and critical analysis of his concept with the hopes of gaining a better understanding of why it is considered the “foundation of vertical flight”.

An iterative design approach was employed, utilizing faculty and university resources, team knowledge from …

Kennesaw State University - Maintenance Optimization And Cost Analysis, Mary E. Ogidigben, David T. Murphy, William L. Fowler

Senior Design Project For Engineers

The Department of Housing and Residence Life was looking for ways to improve the quality of their work while saving costs at the same time. The department allowed the team to look over their work orders where the team noticed over 50% of the work orders were related to room turnover. After this discovery, the team focused all efforts on room turnover and went over the process in detail with management. The team asked to see the standard operating procedure for room turnover and learned that most of the staff did not know they had one.

The team wanted to …

When Optimal Isn’T Optimal, Robin Burk

Operations Management Presentations

Whether you’re an operations manager, a financial executive, an engineer, or an analyst, chances are you’ve been taught to optimize the outcomes of your decisions. And taken in a vacuum, that makes a good deal of sense. But as the new discipline of complex adaptive networks shows, in our heavily interconnected, interdependent world optimizing can introduce hidden vulnerabilities to surprisingly expensive failures. In this webinar we’ll discuss examples of such failures and identify conditions for which a satisfactory but not optimal solution is the best approach overall.

Evaluating The Effectiveness Of Continuing Education At Emergency Medical Services, Tasmia Mustaquim

LSU Master's Theses

Emergency Medical Services (EMS) require staff to recertify periodically, which involves a significant amount of continuing education. Great effort is given to designing and delivering a continuing education program, but it is also important to know if the training had all of the intended impacts. Nationally, there is no evidence-based system in place for training evaluation at EMS. This research proposes a framework being used at East Baton Rouge Parish Emergency Medical Services (EBRP-EMS) to evaluate a course, generate reports to indicate the performance of staff, and identify areas of improvement.

The Kirkpatrick Model, which is a 4-level evaluation, is …

Bootstrap Statistics, Greg Hutto

Operations Management Presentations

Bootstrap Statistics is an intuitive approach to learning statistics because of its simplicity, freedom from assumptions and wide applicability. This webinar will refresh your knowledge of statistics and give you intuitive tools to apply concepts. We will deduce robust methods to build point estimates, interval estimates and assert differences or similarities. If time permits, we’ll even evaluate statistical power! And we’ll do it all with only one major assumption and no curtain of math or normal theory clouding our procedures. The webinar will be accompanied by three papers, tool references, slides and a sample data set with solutions.

Application Of Theory Of Constraints (Toc) In Managing Project Information Constraints, Ferdinand Z. Prantl

EMSE Doctoral Projects

The scope of this doctoral project is the non-traditional application of Drum-Buffer-Rope (DBR) from the area of Theory of Constraints (ToC) in mitigating disruption in distribution facilities during phased upgrades caused by information constraint. The relevance of this project is that industrial equipment upgrades pose a significant risk of disrupting the operation of automated distribution facilities. It is partly due to a very high expected availability rate, as well as tight coupling with other upstream and downstream elements of the larger supply chain network. As a consequence of disruption in this scenario, losses incurred not only within the facility being …

Applications Of Image Processing Techniques And Spatial Data Analytics For Pressure Mapping Analysis, Joan Yamil Martinez

Dissertations

The technological advancements in sensors, monitoring systems, and tracking devices are changing how we study our environment; big data sets are becoming more and more prevalent due to the increase of information gathered with ease. One system benefiting from these technological improvements is pressure mapping technology, an easy-to-use and cost-effective solution for assessing contact pressure distributions.

Pressure mapping systems generally produce data sets of very large volume, especially when used for continuous tracking and monitoring, and are widely used for research in fields of ergonomics, sports, industries, and health disciplines. Pressure mapping systems are particularly important in the study of …

Effects Of Transparency And Haze On Trust And Performance During A Full Motion Video Analysis Task, Sarah C. Leibner

Psychology Theses & Dissertations

Automation is pervasive across all task domains, but its adoption poses unique challenges within the intelligence, surveillance, and reconnaissance (ISR) domain. When users are unable to establish optimal levels of trust in the automation, task accuracy, speed, and automation usage suffer (Chung & Wark, 2016). Degraded visual environments (DVEs) are a particular problem in ISR; however, their specific effects on trust and task performance are still open to investigation (Narayanaswami, Gandhe, & Mehra, 2010). Research suggests that transparency of automation is necessary for users to accurately calibrate trust levels (Lyons et al., 2017). Chen et al. (2014) proposed three levels …

Barriers And Facilitators Influencing Compliance With Enhanced Recovery After Surgery Protocol: A Qualitative Study, Paige Boudreaux

LSU Master's Theses

Standardization in many industries has proven to lead to improved productivity and efficiency, however, standard practice in healthcare has proven difficult due to patient and physician variation. Evidence-based practices provide an opportunity to create more standardization. Enhanced Recovery After Surgery (ERAS) programs are attempting to standardize the surgical pathways of patients by implementing standard evidence-based steps, beginning in the surgeons office and continuing through a patients discharge (Ljungqvist, Scott, & Fearon, 2017). Implementing ERAS to standardize the surgical care of patients has shown to improve patient outcomes, reduce length of stay and reduce readmissions, however, there is a lack of …

Biomechanical Behavior Of A Variable Angle Locked Tibiotalocalcaneal Construct, Farah Hamandi, Gerard Simon, Richard T. Laughlin, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

This paper examines the mechanics of the tibiotalocalcaneal construct made with a PHILOS plating system. A failed device consisting of the LCP plate and cortical, locking, and cannulated screws was used to perform the analysis. Visual, microstructure, and fractographic examinations were carried out to characterize the fracture surface topology. These examinations revealed the presence of surface scratching, inclusions, discoloration, corrosion pits, beach marks, and cleavage and striations on the fracture surface. Further examination of the material crystallography and texture revealed an interaction of S, Ni, and Mo-based inclusions that may have raised pitting susceptibility of the device made with Stainless …

A Methodology For Incorporating The Effect Of Grain Size On The Energy Efficiency Coefficient For Fatigue Crack Initiation Estimation In Polycrystalline Metal, Chun-Yu Ou, Rohit Voothaluru, C. Richard Liu

Purdue University Libraries Open Access Publishing Fund

Estimating fatigue crack initiation of applied loading is challenging due to the large number of individual entities within a microstructure that could affect the accumulation of dislocations. In order to improve the prediction accuracy of fatigue crack initiation models, it is essential to accurately compute the energy dissipated into the microstructure per fatigue loading cycle. The extent of the energy dissipated within the microstructure as a fraction of the overall energy imparted by loading has previously been defined as the ‘energy efficiency coefficient’. This work studied the energy efficiency coefficient as a factor in the measurement of accumulated plastic strain …

Utilization And Standardization Of Beverage Based Containers, Michael T. Bobke, Jack C. Maughan, Kenia Vargas

Industrial and Manufacturing Engineering

The purpose of this document is to formally describe and explain all of the decisions associated with the data collection and analysis for this Cal Poly Senior Project. Throughout the project, we will utilize and hone the skills that each team member has developed during our time in Cal Poly's Engineering program. In addition, this document will briefly describe some of Blue Diamond’s history as one of the biggest almond companies in the world. The statement of work will introduce and describe the current status of the beverage base container process and international beverage container design. Next it will discuss …

Rebar Impalement Safety, Spencer C. Nefores, Steven M. Hoover

Industrial and Manufacturing Engineering

This project is sponsored by Webcor with the purpose of finding a better solution to rebar impalement safety. The current rebar impalement safety caps being used by Webcor were found to frequently fall off after being installed. This results in workers being exposed to the hazard for longer than desired. The research that has been done by the team showed that rebar impalement is a serious hazard and results in injury or death every year. Site visits and interviews were performed to aid in understanding the problem and designing solutions. The customer needs, current state of the problem, existing solutions, …

Parklets San Luis, Owen Kenny, Preston Jag Stebel, Leonidas Goodman, Lukas Braun

Industrial and Manufacturing Engineering

Downtown San Luis Obispo has been a popular destination for tourists, students, families, and roadtrippers. However, according to Ryan Betz, Interim Assistant to the City Manager, foot traffic and retail business revenue has been decreasing. Downtown SLO does not have enough free public spaces. Recent projects such as sidewalk bump outs and lighted crosswalks have aimed at making SLO more pedestrian accessible, but they have not actually made downtown more pleasurable. These projects have not seemed to drive any more business or traffic downtown. There are a myriad of ways to rectify this; studies show that having a free place …