Industrial Engineering Commons^™

Experimental And Numerical Studies Of Laser Powder-Bed Fusion Process With Ti-6al-4v Powder: (1) Porosity And Mechanical Properties, And (2) Transient Phenomena In One- And Two-Dimensional Fabrications., Santosh K. Rauniyar

Electronic Theses and Dissertations

Laser powder bed fusion (L-PBF) process represents a form of metal additive manufacturing (AM) where micron-level powdered material is selectively melted and fused layer by layer to create intricate three-dimensional parts. This process involves rapid melting and solidification, leading to intense thermocapillary convection within the molten pool. The melt pool is a crucial element of the L-PBF process and refers to the localized region where the powder particles are melted and solidified to form each layer of the printed part. The shape and dimensions of the melt pool directly influence the accuracy and surface finish of the printed part. Precise …

Laser-Induced Forward Transfer (Lift) Based Bioprinting Of The Collagen I With Retina Photoreceptor Cells, Md Shakil Arman, Ben Xu, Andrew Tsin, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

This study focuses on the 3D bioprinting of retina photoreceptor cells using a laser-induced forward transfer (LIFT) based bioprinting system. Bioprinting has a great potential to mimic and regenerate the human organoid system, and the LIFT technique has emerged as an efficient method for high-resolution micropatterning and microfabrication of biomaterials and cells due to its capability of creating precise, controlled microdroplets. In this study, the parameters for an effective femtosecond laser-based LIFT process for 3D bioprinting of collagen biomaterial were studied. Different concentrations of collagen I solutions were tested and 0.75 mg/ml to 1 mg/ml collagen Ⅰ was identified as …

Variability In Anesthesia And Its Implications For Improving Patient Safety, Joshua Michael Biro

All Dissertations

Improving patient safety in anesthesia has proven to be an arduous and challenging task. Despite the many strategies and interventions to improve patient safety that have been employed, patient harm in anesthesia remains a problem. The struggle to reduce patient harm in anesthesia is both attributable to and representative of the complexity of the anesthesia system. In navigating this complex system, anesthesia providers have different approaches to how they accomplish their work, which results in variability in anesthesia practice. This variability provides an immense challenge to designing and implementing efforts to improve patient safety, as rigid interventions are often met …

Visibility Based Hospital Inpatient Unit Design., Uttam Karki

Electronic Theses and Dissertations

Patient fall is one of the adverse events in an inpatient unit of a hospital that can lead to disability and/or mortality. Healthcare literature suggests that increased visibility of patients by unit nurses is essential to improve patient monitoring and, in turn, reduce falls. However, such research has been descriptive in nature and does not provide an understanding of the characteristics of an optimal inpatient unit layout from a visibility-standpoint. This dissertation fills significant voids in this domain and adds much-needed realism to develop insights that hospital decision-makers can use to design their inpatient unit layout. Our first contribution (Chapter …

A Novel Approach For Defect Detection Of Wind Turbine Blade Using Virtual Reality And Deep Learning, Md Fazle Rabbi

Open Access Theses & Dissertations

Wind turbines are subjected to continuous rotational stresses and unusual external forces such as storms, lightning, strikes by flying objects, etc., which may cause defects in turbine blades. Hence, it requires a periodical inspection to ensure proper functionality and avoid catastrophic failure. The task of inspection is challenging due to the remote location and inconvenient reachability by human inspection. Researchers used images with cropped defects from the wind turbine in the literature. They neglected possible background biases, which may hinder real-time and autonomous defect detection using aerial vehicles such as drones or others. To overcome such challenges, in this paper, …

Examining Individuals' Use Of The Internet For Healthcare Activities Over Time: Statistical Analysis Of Nhis Data, Zachary Junkins

All Theses

Telehealth is an increasingly important component of healthcare services. Telehealth services may present an opportunity to increase the equity, accessibility, and effectiveness of healthcare. As such, it is critical that telehealth design focus on reducing the barriers to access and usability that may impair some telehealth users. I utilized data from the National Health Interview Survey (NHIS) and multiple logit regression models focused on different aspects of telehealth in order to determine demographic characteristics, behaviors, or opinions which may predict groups that are likely to face a barrier to using telehealth services. This analysis provides an exploratory look at the …

Characterizing Logistics Operations Within A Federal Staging Area For Hurricane Response: A Qualitative Analysis Of Federal, State And Local Perspectives, Jannatul Shefa

Graduate Theses and Dissertations

A successful deployment of logistics operations following a disaster is a collective contribution of federal, state, and local entities to ascertain an efficient and effective response. This research analyzes data from interviews with disaster response logistics experts from these entities. The objective is to investigate the information sources and planning processes used in these organizations to plan vehicle routes for critical resource deliveries to impacted areas. Special attention is directed to the impacts of incomplete knowledge of infrastructure status, such as road disruptions due to debris or flooding. Supported by both qualitative and quantitative evidence, the study finds that incomplete …

Estudio Termoquímico Asistido Por Computadora De Los Polifenoles Presentes En La Fresa [Thermochemical Computer Assisted Study Of Polyphenols Presented In Strawberry], Federico Lopez, Jeimmy Rocio Bonilla Méndez, Luis Ricárdez Sandoval, Hiram Moya, Daniela Mainardi, Arturo González Quiroga, Jeffrey Leon-Pulido

Manufacturing & Industrial Engineering Faculty Publications

Las fresas son un alimento importante en Latinoamérica debido a sus componentes químicos, puesto que son una considerable fuente de calorías y polifenoles. Estos elementos son útiles por su capacidad antioxidante y otras propiedades beneficiosas para la salud. Sin embargo, la presión y la temperatura pueden llegar a afectar la integridad molecular de estos componentes, por lo tanto, en el proceso de producción de diferentes productos basados en fresas, se requiere estudiar las propiedades termoquímicas de los diferentes polifenoles presentes en esta fruta. Para ello, se extrajeron datos de las principales familias de polifenoles, antocianinas, flavanoles, flavonoles, ácidos hidroxibenzoicos y …

An Effective Heuristic To Reduce Total Flowtime For Randomly-Structured Flowshop Problems, Arun John Abraham

Theses

We propose a heuristic to reduce total flowtime in a six-job, four-machine permutation flowshop scheduling problem. This work contributes to the prolific research efforts reported in the permutation flowshop scheduling problem (PFSP).

The heuristic was applied to 102 randomly structured flowshop scheduling problems, with job processing times generated using an integer uniform distribution in the interval [1,100]. The results of computational experiments were deemed satisfactory after being evaluated by using the ordinal and percentile ranks of the resulting total flowtime for the six jobs.

Deep Cnn-Based Automated Optical Inspection For Aerospace Components, Shashi Bhushan Jha

Doctoral Dissertations and Master's Theses

ABSTRACT

The defect detection problem is of outmost importance in high-tech industries such as aerospace manufacturing and is widely employed using automated industrial quality control systems. In the aerospace manufacturing industry, composite materials are extensively applied as structural components in civilian and military aircraft. To ensure the quality of the product and high reliability, manual inspection and traditional automatic optical inspection have been employed to identify the defects throughout production and maintenance. These inspection techniques have several limitations such as tedious, time- consuming, inconsistent, subjective, labor intensive, expensive, etc. To make the operation effective and efficient, modern automated optical inspection …

Electrical Vehicle Charging Infrastructure Design And Operations, Yu Yang, Hen-Geul Yeh

Mineta Transportation Institute

California aims to achieve five million zero-emission vehicles (ZEVs) on the road by 2030 and 250,000 electrical vehicle (EV) charging stations by 2025. To reduce barriers in this process, the research team developed a simulation-based system for EV charging infrastructure design and operations. The increasing power demand due to the growing EV market requires advanced charging infrastructures and operating strategies. This study will deliver two modules in charging station design and operations, including a vehicle charging schedule and an infrastructure planning module for the solar-powered charging station. The objectives are to increase customers’ satisfaction, reduce the power grid burden, and …

Product Costing And Pricing In Small And Medium Enterprises In Tanzania, Cosmas F Kindole

Tanzania Journal of Engineering and Technology (TJET)

metalwork small and medium enterprises located in Dar es Salaam with the aim of establishing methods used by SMEs in Tanzania in setting selling prices of their products. The study was necessitated by the apparent discrepancy of prices for similar products from SMEs. The approach used to gather information was mainly through direct interview and the use of questionnaires. Direct observation and literature review were also used to establish the whole costing and pricing practices in metal manufacturing SMEs. The findings of the study established that product selling practices of the surveyed SMEs were based on instinct and appearance of …

Assessments Of The Application Of Earned Value Management System For Construction Project Performance Measurement In Zanzibar, Juma M. Matindana

Tanzania Journal of Engineering and Technology (TJET)

Many construction projects in developing countries including in Zanzibar suffer from time and budget overruns. The Revolution Government of Zanzibar established different bodies such as Zanzibar Contractors Registration Board (ZCRB), Zanzibar Architects, Engineers and Quantity Surveyors Registration Board (ZAEQRB), Zanzibar Public Procurement and Disposal of Public Asset Authority (ZPPDA), among others with the aim of controlling the performance of project. Often scope creep, time and cost overruns are very common problems in construction projects. This study aims at addressing those problems by assessing the use of Earned Value Management (EVM) methodology in measuring construction industry performance in Zanzibar. The study …

Review On Modifications Of Sisal Fibers For Textile Applications, Liberato V Haule

Tanzania Journal of Engineering and Technology (TJET)

Properties of sisal fibers such as high coarseness and poor drapability made the fibers less suitable in production of conventional textiles compared to synthetic fibers. The environmental consciousness and depletion of petrochemical resources have attracted researchers on investigating the use of natural fibers in the industrial production of conventional textiles. Sisal is among highly researched natural fibers due to its features such as strength, recyclability, availability, low processing cost, light weight and ease process ability. This paper reviews possible modifications of sisal fibers to enhance performance in conventional textiles applications

Recor-Diy, Maxwell W. Ferrer

Industrial and Manufacturing Engineering

RecorDIY is an affordable alternative to ordering Vinyl Records from a manufacturer in the form of an at-home record-cutting lathe. This report will cover the record cutting process from audio to physical, at home record lathes that are currently available, and the possible improvements that I plan to implement in order to make these devices a more viable alternative for small artists. Current models can only create low fidelity records, specifically they struggle with lots of “noise”, extra sounds such as static that make it harder to hear the actual audio. Another issue is record size, as current models can …

Tank Level Controller Plc Lab, Siddhi Upadhyaya, Teghvir Grewal

Electrical Engineering

The California Polytechnic State University San Luis Obispo’s Electrical Engineering Department is currently developing lab experiments for the new EE435 (Industrial Power Control and Automation) class. In order to support these efforts, fourth year Cal Poly students are expected to develop laboratory experiments that will be conducted during this new class for the semester system. The lab experiment focused on in this project is called the Tank Level Controller. This experiment will introduce EE 435 students to Schneider Electric Programmable Logic Controller (PLC) hardware and software, which is prominent in the automation industry.
This experiment will require students to develop …

Experimental Investigation Of Various Energy-Absorbing Layer Materials And Sodium Alginate Viscosities On The Jet Formation In Laser-Induced-Forward-Transfer (Lift) Bioprinting, Shuqi Zhou, Chaoran Dou, Jianzhi Li, Qiqi Zhang, Qilin Dai, Ben Xu

Manufacturing & Industrial Engineering Faculty Publications

Laser-induced-forward-transfer (LIFT) bioprinting technology has been viewed as a regenerative medicine technology because of its high printing quality and good cell viability. To stabilize the jet to achieve high-quality printing, an energy-absorbing layer (EAL) can be introduced. In this study, three materials (graphene, gelatin, and gold) were utilized as the EAL. The effect of each EAL on the jet generation process was investigated. Besides, the effect of graphene EAL thickness was addressed for various experimental conditions. The jet generation process using sodium alginate solutions with different concentrations (1 and 2 wt. %) was also discussed to investigate the effect of …

Passive Vs. Active Wearable Technology Monitoring Trunk Flexion In Elementary Teachers, Bailey Jose

Theses and Dissertations

The objective of this study was to assess the biomechanical and subjective measures of elementary school teachers while wearing active and/or passive wearable devices during the average workday. Five elementary school teachers wore a harness that held an Upright GO 2 posture tracking device and a Vicon Blue Trident sensor on the participant's upper back for two school days. Haptic feedback was on for one day and off for the other. Data from the Vicon wearable was analyzed to determine participants’ trunk flexion severity, frequency, and duration. Surveys were used to determine perceived exertion and perception of wearable technology. This …

A Generalizable Method And Case Application For Development And Use Of The Aviation Systems – Trust Survey (As-Ts)., Jamison Hicks

Theses and Dissertations

Automated systems are integral in the development of modern aircraft, especially for complex military aircraft. Pilot Trust in Automation (TIA) in these systems is vital for optimizing the pilot-vehicle interface and ensuring pilots use the systems appropriately to complete required tasks.

The objective of this research was to develop and validate a TIA scale and survey methodology to identify and mitigate trust deficiencies with automated systems for use in Army Aviation testing. There is currently no standard TIA assessment methodology for U.S. Army aviation pilots that identifies trust deficiencies and potential mitigations.

A comprehensive literature review was conducted to identify …

Developing Systems Engineering And Machine Learning Frameworks For The Improvement Of Aviation Maintenance, Fatine Elakramine

Theses and Dissertations

This dissertation develops systems engineering and machine learning models for aviation maintenance support. With the constant increase in demand for air travel, aviation organizations compete to maintain airworthy aircraft to ensure the safety of passengers. Given the importance of aircraft safety, the aviation sector constantly needs technologies to enhance the maintenance experience, ensure system safety, and limit aircraft downtime. Based on the current literature, the aviation maintenance sector still relies on outdated technologies to maintain aircraft maintenance documentation, including paper-based technical orders. Aviation maintenance documentation contains a mixture of structured and unstructured technical text, mainly inputted by operators, making them …