Open Access. Powered by Scholars. Published by Universities.®
Science and Technology Studies Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 30 of 32
Full-Text Articles in Science and Technology Studies
Developing An Ontology For Representing The Domain Knowledge Specific To Non-Pharmacological Treatment For Agitation In Dementia, Zhenyu Zhang, Ping Yu, H.C. Chang, S K. Lau, Cui Tao, Ning Wang, Mengyang Yin, Chao Deng
Developing An Ontology For Representing The Domain Knowledge Specific To Non-Pharmacological Treatment For Agitation In Dementia, Zhenyu Zhang, Ping Yu, H.C. Chang, S K. Lau, Cui Tao, Ning Wang, Mengyang Yin, Chao Deng
Faculty of Engineering and Information Sciences - Papers: Part B
Introduction: A large volume of clinical care data has been generated for managing agitation in dementia. However, the valuable information in these data has not been used effectively to generate insights for improving the quality of care. Application of artificial intelligence technologies offers us enormous opportunities to reuse these data. For health data science to achieve this, this study focuses on using ontology to coding clinical knowledge for non-pharmacological treatment of agitation in a machine-readable format. Methods: The resultant ontology—Dementia-Related Agitation Non-Pharmacological Treatment Ontology (DRANPTO)—was developed using a method adopted from the NeOn methodology. Results: DRANPTO consisted of 569 concepts …
First In Vitro Evidence Of Modulated Electro-Hyperthermia Treatment Performance In Combination With Megavoltage Radiation By Clonogenic Assay, Marjorie Mcdonald, Stephanie Corde, Michael L. F Lerch, Anatoly B. Rosenfeld, Michael A. Jackson, Moeava Tehei
First In Vitro Evidence Of Modulated Electro-Hyperthermia Treatment Performance In Combination With Megavoltage Radiation By Clonogenic Assay, Marjorie Mcdonald, Stephanie Corde, Michael L. F Lerch, Anatoly B. Rosenfeld, Michael A. Jackson, Moeava Tehei
Faculty of Engineering and Information Sciences - Papers: Part B
Modulated electro-hyperthermia (mEHT) is a form of hyperthermia used in the treatment of cancer. It is a variation that relies on a particular form of enhanced selectivity to enable more effective cancerous cell death yet maintaining the integrity of healthy non-cancerous cells. It is yet to successfully make the major step into the wider medical community despite several encouraging trials. In this study, we investigate mEHT from an in vitro perspective. We demonstrate a supra-additive effect on 9 L gliosarcoma cells when exposed to mEHT in combination with MV X-ray radiation. The supra-additive effect is hypothesized to be induced by …
Regional Variation In Rates Of Ivf Treatment Across Australia: A Population-Based Study, Louise Rawlings, Pauline Y. O'Shaughnessy, Stephen Robson
Regional Variation In Rates Of Ivf Treatment Across Australia: A Population-Based Study, Louise Rawlings, Pauline Y. O'Shaughnessy, Stephen Robson
Faculty of Engineering and Information Sciences - Papers: Part B
Background: There is variation in uptake of in vitro fertilisation (IVF) between countries, and Australia has high incidence rates of IVF due to universal public funding. However, it remains unclear whether there is regional variation and, if present, what might cause this. Objectives: We sought to determine whether regional variations in treatment rates existed and what might influence these. Methods: The number of cycles of fresh IVF and intrauterine insemination (IUI) for women were obtained for the period 2011 until 2014 in two age groups (25 to 34 years and 35 to 44 years) to calculate incidence rates. Proxy indicators …
Graphene/Pvdf Flat-Sheet Membrane For The Treatment Of Ro Brine From Coal Seam Gas Produced Water By Air Gap Membrane Distillation, Yun Chul Woo, Youngjin Kim, Wang-Geun Shim, Leonard D. Tijing, Minwei Yao, Long D. Nghiem, June-Seok Choi, Seung-Hyun Kim, Ho Kyong Shon
Graphene/Pvdf Flat-Sheet Membrane For The Treatment Of Ro Brine From Coal Seam Gas Produced Water By Air Gap Membrane Distillation, Yun Chul Woo, Youngjin Kim, Wang-Geun Shim, Leonard D. Tijing, Minwei Yao, Long D. Nghiem, June-Seok Choi, Seung-Hyun Kim, Ho Kyong Shon
Faculty of Engineering and Information Sciences - Papers: Part A
No abstract provided.
Robustness Of Ipsa Optimized High-Dose-Rate Prostate Brachytherapy Treatment Plans To Catheter Displacements, Joel Poder, May Whitaker
Robustness Of Ipsa Optimized High-Dose-Rate Prostate Brachytherapy Treatment Plans To Catheter Displacements, Joel Poder, May Whitaker
Faculty of Engineering and Information Sciences - Papers: Part A
Purpose: Inverse planning simulated annealing (IPSA) optimized brachytherapy treatment plans are characterized with large isolated dwell times at the first or last dwell position of each catheter. The potential of catheter shifts relative to the target and organs at risk in these plans may lead to a more significant change in delivered dose to the volumes of interest relative to plans with more uniform dwell times. Material and methods: This study aims to determine if the Nucletron Oncentra dwell time deviation constraint (DTDC) parameter can be optimized to improve the robustness of high-dose-rate (HDR) prostate brachytherapy plans to catheter displacements. …
A Phantom Assessment Of Achievable Contouring Concordance Across Multiple Treatment Planning Systems, Elise M. Pogson, Jarrad Begg, Michael Jameson, Claire Dempsey, Drew Latty, Vikneswary Batumalai, Andrew Lim, Kankean Kandasamy, Peter E. Metcalfe, Lois C. Holloway
A Phantom Assessment Of Achievable Contouring Concordance Across Multiple Treatment Planning Systems, Elise M. Pogson, Jarrad Begg, Michael Jameson, Claire Dempsey, Drew Latty, Vikneswary Batumalai, Andrew Lim, Kankean Kandasamy, Peter E. Metcalfe, Lois C. Holloway
Faculty of Engineering and Information Sciences - Papers: Part A
In this paper, the highest level of inter- and intra-observer conformity achievable with different treatment planning systems (TPSs), contouring tools, shapes, and sites have been established for metrics including the Dice similarity coefficient (DICE) and Hausdorff Distance. High conformity values, e.g. DICEBreast_Shape = 0.99 ± 0.01, were achieved. Decreasing image resolution decreased contouring conformity.
Influence Of Oxygen Plasma Treatment Parameters On Poly(Vinylidene Fluoride) Electrospun Fiber Mats Wettability, Daniela M. Correia, Clarisse Ribeiro, Vitor Sencadas, Gabriela Botelho, S A. Carabineiro, J L. Gomez Ribelles, Senentxu Lanceros-Méndez
Influence Of Oxygen Plasma Treatment Parameters On Poly(Vinylidene Fluoride) Electrospun Fiber Mats Wettability, Daniela M. Correia, Clarisse Ribeiro, Vitor Sencadas, Gabriela Botelho, S A. Carabineiro, J L. Gomez Ribelles, Senentxu Lanceros-Méndez
Faculty of Engineering and Information Sciences - Papers: Part A
Electrospun poly(vinylidene fluoride) (PVDF) fiber mats found applications in an increasing number of areas, such as battery separators, filtration and detection membranes, due to their excellent properties. However, there are limitations due to the hydrophobic nature and low surface energy of PVDF. In this work, oxygen plasma treatment has been applied in order to modify the surface wettability of PVDF fiber mats and superhydrophilic PVDF electrospun membranes have been obtained. Further, plasma treatment does not significantly influences fiber average size (~400 ± 200 nm), morphology, electroactive B-phase content (~80-85%) or the degree of crystallinity (Xc of 42 ± 2%), allowing …
Dce-Mri For Pre-Treatment Prediction And Post-Treatment Assessment Of Treatment Response In Sites Of Squamous Cell Carcinoma In The Head And Neck, Ann D. King, Steven Kwok Keung Chow, Kwok-Hung Yu, Frankie Kwok Fai Mo, David K. W. Yeung, Jing Yuan, Benjamin King Hong Law, Kunwar S. Bhatia, Alexander C. Vlantis, Anil T. Ahuja
Dce-Mri For Pre-Treatment Prediction And Post-Treatment Assessment Of Treatment Response In Sites Of Squamous Cell Carcinoma In The Head And Neck, Ann D. King, Steven Kwok Keung Chow, Kwok-Hung Yu, Frankie Kwok Fai Mo, David K. W. Yeung, Jing Yuan, Benjamin King Hong Law, Kunwar S. Bhatia, Alexander C. Vlantis, Anil T. Ahuja
Faculty of Engineering and Information Sciences - Papers: Part A
Background and Purpose It is important to identify patients with head and neck squamous cell carcinoma (SCC) who fail to respond to chemoradiotherapy so that they can undergo post-treatment salvage surgery while the disease is still operable. This study aimed to determine the diagnostic performance of dynamic contrast enhanced (DCE)-MRI using a pharmacokinetic model for pre-treatment predictive imaging, as well as post-treatment diagnosis, of residual SCC at primary and nodal sites in the head and neck. Material and Methods Forty-nine patients with 83 SCC sites (primary and/or nodal) underwent pre-treatment DCEMRI, and 43 patients underwent post-treatment DCE-MRI, of which 33 …
Mri Distortion: Considerations For Mri Based Radiotherapy Treatment Planning, Amy Walker, Gary P. Liney, Peter E. Metcalfe, Lois Holloway
Mri Distortion: Considerations For Mri Based Radiotherapy Treatment Planning, Amy Walker, Gary P. Liney, Peter E. Metcalfe, Lois Holloway
Faculty of Engineering and Information Sciences - Papers: Part A
Distortion in magnetic resonance images needs to be taken into account for the purposes of radiotherapy treatment planning (RTP). A commercial MRI grid phantom was scanned on 4 different MRI scanners with multiple sequences to assess variations in the geometric distortion. The distortions present across the field of view were then determined. The effect of varying bandwidth on image distortion and signal to noise was also investigated. Distortion maps were created and these were compared to the location of patient anatomy within the scanner bore to estimate the magnitude and distribution of distortions located within specific clinical regions. Distortion magnitude …
Towards A Cryptographic Treatment Of Publish/Subscribe Systems, Tsz Hon Yuen, Willy Susilo, Yi Mu
Towards A Cryptographic Treatment Of Publish/Subscribe Systems, Tsz Hon Yuen, Willy Susilo, Yi Mu
Faculty of Engineering and Information Sciences - Papers: Part A
Publish/subscribe mechanism is a typical many-to-many messaging paradigm when multiple applications want to receive the same message or when a group of applications would like to notify each other. Nonetheless, there exist only a few works that address the security issues for content-based publish/subscribe systems formally. Although the security requirements have been partially addressed by Wang et al., there is no formal definition for all of these security requirements in the literature. As a result, most of the existing schemes do not have any security proof and it is difficult to justify whether those schemes are really secure in practice. …
Sludge Cycling Between Aerobic, Anoxic And Anaerobic Regimes To Reduce Sludge Production During Wastewater Treatment: Performance, Mechanisms, And Implications, Galilee Semblante, Faisal Ibney Hai, Huu H. Ngo, Wenshan Guo, Sheng-Jie You, William Price, Long Nghiem
Sludge Cycling Between Aerobic, Anoxic And Anaerobic Regimes To Reduce Sludge Production During Wastewater Treatment: Performance, Mechanisms, And Implications, Galilee Semblante, Faisal Ibney Hai, Huu H. Ngo, Wenshan Guo, Sheng-Jie You, William Price, Long Nghiem
Faculty of Engineering and Information Sciences - Papers: Part A
Alternate cycling of sludge in aerobic, anoxic, and anaerobic regimes is a promising strategy that can reduce the sludge yield of conventional activated sludge (CAS) by up to 50% with potentially lower capital and operating cost than physical- and/or chemical-based sludge minimisation techniques. The mechanisms responsible for reducing sludge yield include alterations to cellular metabolism and feeding behaviour (metabolic uncoupling, feasting/fasting, and endogenous decay), biological floc destruction, and predation on bacteria by higher organisms. Though discrepancies across various studies are recognisable, it is apparent that sludge retention time, oxygen-reduction potential of the anaerobic tank, temperature, sludge return ratio and loading …
Surface Treatment Evaluation Of Induction Hardened And Tempered 1045 Steel, Alain Kusmoko, Druce P. Dunne, Rosfian Dahar, Huijun Li
Surface Treatment Evaluation Of Induction Hardened And Tempered 1045 Steel, Alain Kusmoko, Druce P. Dunne, Rosfian Dahar, Huijun Li
Faculty of Engineering and Information Sciences - Papers: Part A
Rod-shaped samples of SAE-AISI grade 1045 steel with a ferrite and pearlite structure in the as received condition were subjected to induction hardening to increase the hardness of the surface layer. The heat treatment process was carried out using induction heating with five different peak temperatures: 8000C, 9000C, 10000C, 11000C and 1200 0C for 2 s, before water quenching. The chemical composition and the microstructures of these samples were characterized by spectrometry and optical microscopy. The microhardness of the surface of each samples was measured and preliminary tensile testing was conducted. The results showed the formation of a significant hardened …
A Review On The Occurrence Of Micropollutants In The Aquatic Environment And Their Fate And Removal During Wastewater Treatment, Yunlong Luo, Wenshan Guo, Huu Hao Ngo, Long Duc Nghiem, Faisal Ibney Hai, Jian Zhang, Shuang Liang, Xiaochang C. Wang
A Review On The Occurrence Of Micropollutants In The Aquatic Environment And Their Fate And Removal During Wastewater Treatment, Yunlong Luo, Wenshan Guo, Huu Hao Ngo, Long Duc Nghiem, Faisal Ibney Hai, Jian Zhang, Shuang Liang, Xiaochang C. Wang
Faculty of Engineering and Information Sciences - Papers: Part A
Micropollutants are emerging as a new challenge to the scientific community. This review provides a summary of the recent occurrence of micropollutants in the aquatic environment including sewage, surface water, groundwater and drinking water. The discharge of treated effluent from WWTPs is a major pathway for the introduction of micropollutants to surface water. WWTPs act as primary barriers against the spread of micropollutants. WWTP removal efficiency of the selected micropollutants in 14 countries/regions depicts compound-specific variation in removal, ranging from 12.5 to 100%. Advanced treatment processes, such as activated carbon adsorption, advanced oxidation processes, nanofiltration, reverse osmosis, and membrane bioreactors …
Ropes Eye Plaque Dosimetry: Commissioning And Verification Of An Ophthalmic Brachytherapy Treatment Planning System, J Poder, N Annabell, M Geso, M Alqathami, S Corde
Ropes Eye Plaque Dosimetry: Commissioning And Verification Of An Ophthalmic Brachytherapy Treatment Planning System, J Poder, N Annabell, M Geso, M Alqathami, S Corde
Faculty of Engineering and Information Sciences - Papers: Part A
In this study, the Plaque SimulatorTM eye plaque brachytherapy planning system was commissioned for ROPES eye plaques and Amersham Health model 6711 Iodine 125 seeds, using TG43-UI data. The brachytherapy module of the RADCALC® independent checking program was configured to allow verification of the accuracy of the dose calculated by Plaque SimulatorTM. Central axis depth dose distributions were compared and observed to agree to within 2% for all ROPES plaque models and depths of interest. Experimental measurements were performed with a customized PRESAGEm 3-D type dosimeter to validate the calculated depth dose distributions. Preliminary results have shown the effect of …
Effects Of Tungsten Addition And Heat Treatment Conditions On Microstructure And Mechanical Properties Of Microalloyed Forging Steels, Jingwei Zhao, Zhengyi Jiang, Chong Soo Lee
Effects Of Tungsten Addition And Heat Treatment Conditions On Microstructure And Mechanical Properties Of Microalloyed Forging Steels, Jingwei Zhao, Zhengyi Jiang, Chong Soo Lee
Faculty of Engineering and Information Sciences - Papers: Part A
In the present work, the effects of tungsten (W) addition and heat treatment conditions on the microstructure, impact toughness and tensile properties of microalloyed forging steels were studied. Four kinds of microalloyed forging steels were produced by varying W additions (0, 0.5, 1 and 2 wt%). Heat treatment was carried out at temperatures ranging from 840 to 950 °C followed by air and furnace cooling. Mechanical tests were used to evaluate the room temperature Charpy impact and tensile properties. The resulting microstructures were analysed via optical microscope (OM), scanning electron microscope (SEM) and transmission electron microscope (TEM). The results show …
Enhancing Impact Fracture Toughness And Tensile Properties Of A Microalloyed Cast Steel By Hot Forging And Post-Forging Heat Treatment Processes, Jingwei Zhao, Zhengyi Jiang, Chong Soo Lee
Enhancing Impact Fracture Toughness And Tensile Properties Of A Microalloyed Cast Steel By Hot Forging And Post-Forging Heat Treatment Processes, Jingwei Zhao, Zhengyi Jiang, Chong Soo Lee
Faculty of Engineering and Information Sciences - Papers: Part A
In the present work, the effects of hot forging and post-forging heat treatment on the impact fracture toughness and tensile properties of a microalloyed cast steel were investigated. Mechanical tests were used to evaluate the room temperature impact fracture toughness and tensile properties of the steel. The resulting microstructures were analysed by optical microscope (OM), scanning electron microscope (SEM) and transmission electron microscope (TEM). The extraction replica technology was used to investigate the characterisation of complex precipitates formed during heat treatment. The obtained results showed that the coarse-grained microstructure of the forged specimen was significantly refined after post-forging heat treatment. …
Enhancing Mechanical Properties Of A Low-Carbon Microalloyed Cast Steel By Controlled Heat Treatment, Jingwei Zhao, Jeong Hun Lee, Yong Woo Kim, Zhengyi Jiang, Chong Soo Lee
Enhancing Mechanical Properties Of A Low-Carbon Microalloyed Cast Steel By Controlled Heat Treatment, Jingwei Zhao, Jeong Hun Lee, Yong Woo Kim, Zhengyi Jiang, Chong Soo Lee
Faculty of Engineering and Information Sciences - Papers: Part A
In the present work, detailed studies were made on the optimization of microstructure and mechanical properties of a low-carbon microalloyed cast steel through control of heat treatment conditions. Specimens were austenitized at temperatures ranging from 950 to 1200 °C for 2 h followed by different cooling methods (furnace, air and water). For analyzing the effect of holding time on mechanical properties, some cast specimens were austenitized at 1100 °C for different times followed by furnace cooling. After heat treatment, mechanical tests were employed to evaluate the room temperature Charpy impact and tensile properties. The characterization of complex precipitates formed during …
Mechanical Properties Of Al-Mg-Si Alloy Sheets Produced Using Asymmetric Cryorolling And Ageing Treatment, Hai-Liang Yu, A Kiet Tieu, Cheng Lu, Xiang-Hua Liu, Ajit Godbole, Charlie Kong
Mechanical Properties Of Al-Mg-Si Alloy Sheets Produced Using Asymmetric Cryorolling And Ageing Treatment, Hai-Liang Yu, A Kiet Tieu, Cheng Lu, Xiang-Hua Liu, Ajit Godbole, Charlie Kong
Faculty of Engineering and Information Sciences - Papers: Part A
An asymmetric cryorolling technique was used to reduce the thickness of an Al-Mg-Si alloy sheet from 1.5 mm to 0.19 mm. The samples were subsequently aged for 48 h at 100 degrees celcius. The hardness and tensile strength of both rolled and aged sheets increased with the number of passes up to the sixth pass, but the tensile stress decreased after the seventh pass. Investigation of the microstructure of the sheets showed that the grain size after seven passes was about 235 nm and revealed the presence of Fe-Cr-Mn-Si particles in the samples. The deformation of Fe-Cr-Mn-Si particles and sheet …
The Potential For An Enhanced Role For Mri In Radiation-Therapy Treatment Planning, P Metcalfe, G P. Liney, L Holloway, A Walker, M Barton, G P. Delaney, S Vinod, W Tome
The Potential For An Enhanced Role For Mri In Radiation-Therapy Treatment Planning, P Metcalfe, G P. Liney, L Holloway, A Walker, M Barton, G P. Delaney, S Vinod, W Tome
Faculty of Engineering and Information Sciences - Papers: Part A
The exquisite soft-tissue contrast of magnetic resonance imaging (MRI) has meant that the technique is having an increasing role in contouring the gross tumor volume (GTV) and organs at risk (OAR) in radiation therapy treatment planning systems (TPS). MRI-planning scans from diagnostic MRI scanners are currently incorporated into the planning process by being registered to CT data. The soft-tissue data from the MRI provides target outline guidance and the CT provides a solid geometric and electron density map for accurate dose calculation on the TPS computer. There is increasing interest in MRI machine placement in radiotherapy clinics as an adjunct …
Validation Of An Imrt Beam Model Using A Secondary Treatment Planning System As A 3d Dosimeter, A Xing, S Arumugam, L Holloway, G Goozee
Validation Of An Imrt Beam Model Using A Secondary Treatment Planning System As A 3d Dosimeter, A Xing, S Arumugam, L Holloway, G Goozee
Faculty of Engineering and Information Sciences - Papers: Part A
A treatment planning system IMRT beam model is usually validated using phantom-based measurement, however this will not detect errors related to patient anatomy and inhomogeneity. In this study a secondary treatment system (CMS XIO) was used as a 3D dosimeter to verify an IMRT beam model recently commissioned in a Philips Pinnacle treatment planning system. Data sets from three head-neck and two prostate patients previously treated were utilised. The IMRT plans for these patients were planned in Pinnacle and transferred to XIO. The dose at each voxel in the patient volume was calculated in both XIO and Pinnacle. The 2D …
Modification Of A Polyamide Reverse Osmosis Membrane By Heat Treatment For Enhanced Fouling Resistance, Takahiro Fujioka, Long D. Nghiem
Modification Of A Polyamide Reverse Osmosis Membrane By Heat Treatment For Enhanced Fouling Resistance, Takahiro Fujioka, Long D. Nghiem
Faculty of Engineering and Information Sciences - Papers: Part A
The use of heat treatment to improve solute rejection and fouling resistance of a polyamide reverse osmosis (RO) membrane was investigated in this study. Heat treatment was carried out by immersing the membrane samples in Milli-Q water at 70 degrees celcius for a specific duration. Heat treatment reduced the pure water permeability from 4.1 to 2.8 L/m2 bar but improved conductivity rejection from 95.5 to 97.0 percent. As a result, a correlation was observed between changes in the two parameters. Marginal changes in the membrane surface characteristics were observed as a result of heat treatment. Heat treatment significantly improved the …
I-125 Ropes Eye Plaque Dosimetry: Validation Of A Commercial 3d Ophthalmic Brachytherapy Treatment Planning System And Independent Dose Calculation Software With Gafchromic Ebt3 Films, Joel Poder, Stephanie Corde
I-125 Ropes Eye Plaque Dosimetry: Validation Of A Commercial 3d Ophthalmic Brachytherapy Treatment Planning System And Independent Dose Calculation Software With Gafchromic Ebt3 Films, Joel Poder, Stephanie Corde
Faculty of Engineering and Information Sciences - Papers: Part A
Purpose: The purpose of this study was to measure the dose distributions for different Radiation Oncology Physics and Engineering Services, Australia (ROPES) type eye plaques loaded with I-125 (model 6711) seeds using GafChromic R EBT3 films, in order to verify the dose distributions in the Plaque SimulatorTM (PS) ophthalmic 3D treatment planning system. The brachytherapy module of RADCALC R was used to independently check the dose distributions calculated by PS. Correction factors were derived from the measured data to be used in PS to account for the effect of the stainless steel ROPES plaque backing on the 3D dose distribution. …
Mine Water Treatment Using A Vacuum Membrane Distillation System, Muttucumaru Sivakumar, M Ramezanianpour, G O Halloran
Mine Water Treatment Using A Vacuum Membrane Distillation System, Muttucumaru Sivakumar, M Ramezanianpour, G O Halloran
Faculty of Engineering and Information Sciences - Papers: Part A
Water scarcity and strict environmental regulations has seen the rapid development of membrane technologies in water and wastewater treatment. Effluent discharge from a local coal mine containing 2332 mg/L of TDS (Total Dissolved Solids), 14.4 mg/L of Ca, 2.72 mg/L of Mg, 1.92 mg/L of Fe and 3.38 mg/L of Al is treated by a vacuum membrane distillation system. This technology aims to remove particles and dissolved impurities by evaporation and condensation technique that mimics what occurs in nature within a water cycle. It employs a hollow-fiber membrane that enables to remove 99.9% of TDS from mine water. This paper …
Coupling Granular Activated Carbon Adsorption With Membrane Bioreactor Treatment For Trace Organic Contaminant Removal: Breakthrough Behaviour Of Persistent And Hydrophilic Compounds, Luong N. Nguyen, Faisal I. Hai, William E. Price, Jinguo Kang, Long D. Nghiem
Coupling Granular Activated Carbon Adsorption With Membrane Bioreactor Treatment For Trace Organic Contaminant Removal: Breakthrough Behaviour Of Persistent And Hydrophilic Compounds, Luong N. Nguyen, Faisal I. Hai, William E. Price, Jinguo Kang, Long D. Nghiem
Faculty of Engineering and Information Sciences - Papers: Part A
This study investigated the removal of trace organic contaminants by a combined membrane bioreactor - granular activated carbon (MBR-GAC) system over a period of 196 days. Of the 22 compounds investigated here, all six hydrophilic compounds with electron-withdrawing functional groups (i.e., metronidazole, carbamazepine, ketoprofen, naproxen, fenoprop and diclofenac) exhibited very low removal efficiency by MBR-only treatment. GAC post-treatment initially complemented MBR treatment very well; however, a compound-specific gradual deterioration of the removal of the above-mentioned problematic compounds was noted. While a 20% breakthrough of all four negatively charged compounds namely ketoprofen, naproxen, fenoprop and diclofenac occurred within 1000-3000 bed volumes …
Removal Of Emerging Trace Organic Contaminants By Mbr-Based Hybrid Treatment Processes, Luong Nguyen, Faisal Ibney Hai, Jinguo Kang, William E. Price, Long D. Nghiem
Removal Of Emerging Trace Organic Contaminants By Mbr-Based Hybrid Treatment Processes, Luong Nguyen, Faisal Ibney Hai, Jinguo Kang, William E. Price, Long D. Nghiem
Faculty of Engineering and Information Sciences - Papers: Part A
The aim of this study was to demonstrate the complementarity of combining membrane bioreactor (MBR) treatment with UV oxidation or high pressure membrane filtration processes such as nanofiltration (NF) or reverse osmosis (RO) for the removal of trace organic contaminants (TrOC). The results suggest that the removal mechanisms of TrOC by either UV oxidation or NF/RO membrane filtration differ significantly from those of an MBR system. Thus, they can complement MBR treatment very well to significantly improve the removal of TrOC. MBR treatment can effectively remove hydrophobic and readily biodegradable hydrophilic TrOC. The remaining hydrophilic and biologically persistent TrOC were …
The Fate Of Pharmaceuticals, Steroid Hormones, Phytoestrogens, Uv-Filters And Pesticides During Mbr Treatment, Kaushalya C. Wijekoon, Faisal I. Hai, Jinguo Kang, William E. Price, Wenshan Guo, Hao H. Ngo, Long D. Nghiem
The Fate Of Pharmaceuticals, Steroid Hormones, Phytoestrogens, Uv-Filters And Pesticides During Mbr Treatment, Kaushalya C. Wijekoon, Faisal I. Hai, Jinguo Kang, William E. Price, Wenshan Guo, Hao H. Ngo, Long D. Nghiem
Faculty of Engineering and Information Sciences - Papers: Part A
This study examined the relationship between molecular properties and the fate of trace organic contaminants (TrOCs) in the aqueous and solid phases during wastewater treatment by MBR. A set of 29 TrOCs was selected to represent pharmaceuticals, steroid hormones, phytoestrogens, UV-filters and pesticides that occur ubiquitously in municipal wastewater. Both adsorption and biodegradation/transformation were found responsible for the removal of TrOCs by MBR treatment. A connection between biodegradation and molecular structure could be observed while adsorption was the dominant removal mechanism for the hydrophobic (logD > 3.2) compounds. Highly hydrophobic (logD > 3.2) but readily biodegradable compounds did not accumulate in sludge. …
Effect Of The Austenitising Heat Treatment On The Microstructure And Hardness Of Martensitic Stainless Steel Aisi 420, Lilian D. Barlow, Madeleine Du Toit
Effect Of The Austenitising Heat Treatment On The Microstructure And Hardness Of Martensitic Stainless Steel Aisi 420, Lilian D. Barlow, Madeleine Du Toit
Faculty of Engineering and Information Sciences - Papers: Part A
The effect of austenitizing on the microstructure and hardness of two martensitic stainless steels was examined with the aim of supplying heat-treatment guidelines to the user that will ensure a martensitic structure with minimal retained austenite, evenly dispersed carbides and a hardness of between 610 and 740 HV (Vickers hardness) after quenching and tempering. The steels examined during the course of this examination conform in composition to medium-carbon AISI 420 martensitic stainless steel, except for the addition of 0.13% vanadium and 0.62% molybdenum to one of the alloys. Steel samples were austenitized at temperatures between 1000 and 1200 C, followed …
Distortion Behavior Of A Heavy Hydro Turbine Blade Casting During Forced Air Cooling In Normalizing Treatment Process, Hailiang Yu, Jinwu Kang, T J. Wang, J A. Ma, Y Y. Hu, Tianyou Huang, S B. Wang, Y Wu, C C. Zhang, Yan-Tao Dai, P Li
Distortion Behavior Of A Heavy Hydro Turbine Blade Casting During Forced Air Cooling In Normalizing Treatment Process, Hailiang Yu, Jinwu Kang, T J. Wang, J A. Ma, Y Y. Hu, Tianyou Huang, S B. Wang, Y Wu, C C. Zhang, Yan-Tao Dai, P Li
Faculty of Engineering and Information Sciences - Papers: Part A
Distortion behavior of blade castings in heat treatment process determines their geometrical accuracy, and improper control of it may result in additional repair, shape righting, or even rejection. This article presents a novel approach for discovering the distortion behavior of heavy blade castings during heat treatment process in production. Real-time measurements of distortion and temperature field of a heavy hydro turbine blade casting weighted 17 ton during forced air cooling in normalizing treatment process were carried out by using deformation measurement instruments and an infrared thermal imaging camera. The distortion processes of the typical locations of blade and the temperature …
Predicting The Fate Of Emerging Trace Organic Contaminants Of Concern During Mbr Treatment Based On Their Molecular Properties, K C. Wijekoon, L D. Nghiem, F I. Hai, J Kang, W E. Price
Predicting The Fate Of Emerging Trace Organic Contaminants Of Concern During Mbr Treatment Based On Their Molecular Properties, K C. Wijekoon, L D. Nghiem, F I. Hai, J Kang, W E. Price
Faculty of Engineering and Information Sciences - Papers: Part A
We demonstrate that the fate of emerging trace organic contaminants during membrane bioreactor (MBR) treatment can be qualitatively predicted by assessing their molecular properties. This work futher expands the qualitative framework for the prdiction of trace organic removal by MBR treatment reported in our recent study.
Coupling Powdered Activated Carbon (Pac) Adsorption With Membrane Bioreactor (Mbr) Treatment For Enhanced Removal Of Trace Organics, Luong Nguyen, Faisal Ibney Hai, Long Nghiem, Jinguo Kang, William Price
Coupling Powdered Activated Carbon (Pac) Adsorption With Membrane Bioreactor (Mbr) Treatment For Enhanced Removal Of Trace Organics, Luong Nguyen, Faisal Ibney Hai, Long Nghiem, Jinguo Kang, William Price
Faculty of Engineering and Information Sciences - Papers: Part A
the occurrence of trace organics such as pesticides, pharmaceutically active compounds, natural and synthetic hormones as well as varous industrial compounds in the aquatic environment is of great concern due to their potential adverse effects on human health and those of other biota. Therefore, the removal of these compounds from wastewater is an important consideration to ensure safe drinking water and better protection of the environment. In the literature, several techniques have been explored for trace organics removal, namely, conventional activated sludge, membrane bioreactors (MBRs), and absorptioin. However it has been found that neither MBR nor activated carbon on its …