Open Access. Powered by Scholars. Published by Universities.®
Science and Technology Studies Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Publication
- Publication Type
Articles 1 - 9 of 9
Full-Text Articles in Science and Technology Studies
Controlled And Scalable Torsional Actuation Of Twisted Nylon 6 Fiber, Shazed Aziz, Sina Naficy, Javad Foroughi, Hugh Ralph Brown, Geoffrey M. Spinks
Controlled And Scalable Torsional Actuation Of Twisted Nylon 6 Fiber, Shazed Aziz, Sina Naficy, Javad Foroughi, Hugh Ralph Brown, Geoffrey M. Spinks
Faculty of Engineering and Information Sciences - Papers: Part A
Large-scale torsional actuation occurs in twisted fibers and yarns as a result of volume change induced electrochemically, thermally, photonically, and other means. A quantitative relationship between torsional actuation (stroke and torque) and volume change is here introduced. The analysis is based on experimental investigation of the effects of fiber diameter and inserted twist on the torsional stroke and torque measured when heating and cooling nylon 6 fibers over the temperature range of 26-62 °C. The results show that the torsional stroke depends only on the amount of twist inserted into the fiber and is independent of fiber diameter. The torque …
Terahertz (6-15 Thz) Spectroscopy And Numerical Modelling Of Intermolecular Vibrations In Benzoic Acid And Its Derivatives, Lucia Lepodise, Josip Horvat, R A. Lewis
Terahertz (6-15 Thz) Spectroscopy And Numerical Modelling Of Intermolecular Vibrations In Benzoic Acid And Its Derivatives, Lucia Lepodise, Josip Horvat, R A. Lewis
Faculty of Engineering and Information Sciences - Papers: Part A
Terahertz spectroscopy of benzoic acid (BA) and two of its derivatives, 2-hydroxybenzoic acid (2OH-BA) and 3-hydroxybenzoic acid (3OH-BA), has been investigated in the spectral region 200 to 500 cm-1 (6.06 to 15.15 THz). The spectra show distinct absorption features. There is agreement between some of the absorption lines observed for these compounds, despite a shift in energy, which is attributed to the differences in the molecular structures. Numerical modelling gave corresponding absorption lines, and this helped in the assignment. Temperature dependence studies revealed that most of the absorption lines are composite lines in this frequency region.
A Comparative Study For Wear Resistant Of Stellite 6 Coatings On Nickel Alloy Substrate Produced By Laser Cladding, Hvof And Plasma Spraying Techniques, Alain Kusmoko, Druce P. Dunne, Huijun Li
A Comparative Study For Wear Resistant Of Stellite 6 Coatings On Nickel Alloy Substrate Produced By Laser Cladding, Hvof And Plasma Spraying Techniques, Alain Kusmoko, Druce P. Dunne, Huijun Li
Faculty of Engineering and Information Sciences - Papers: Part A
Stellite 6 coatings were deposited using laser cladding, high velocity oxygen fuel (HVOF) thermal spraying and plasma spraying techniques on a nickel alloy substrate. The surface roughness, chemical composition and microstructure of these coatings were characterised by a surface profilometer, optical microscopy (OM) and scanning electron microscopy (SEM). The microhardness of the coatings was measured and the wear behaviour of the coatings was examined under controlled test conditions in a pin-on-plate (reciprocating) tribometer. The results showed that fully dense and crack-free laser clad Stellite 6 coatings can be formed on a high nickel steel substrate. Average microhardness values of the …
3d Fem Analysis Of Strip Shape During Multi-Pass Rolling In A 6-High Cvc Cold Rolling Mill, Kezhi Linghu, Zhengyi Jiang, Jingwei Zhao, Fei Li, Dongbin Wei, Jianzhong Xu, Xiaoming Zhang, Xianming Zhao
3d Fem Analysis Of Strip Shape During Multi-Pass Rolling In A 6-High Cvc Cold Rolling Mill, Kezhi Linghu, Zhengyi Jiang, Jingwei Zhao, Fei Li, Dongbin Wei, Jianzhong Xu, Xiaoming Zhang, Xianming Zhao
Faculty of Engineering and Information Sciences - Papers: Part A
A 3D elastic–plastic finite element method (FEM) model of cold strip rolling for 6-high continuous variable crown (CVC) control rolling mill was developed. This model considers the boundary conditions such as accurate CVC curves, total rolling forces, total bending forces and roll shifting values. The rolling force distributions were obtained by the internal iteration processes instead of being treated as model boundary conditions. The calculated error has been significantly reduced by the developed model. Based on the rolling schedule data from a 1,850-mm CVC cold rolling mill, the absolute error between the simulated results and the actual values is obtained …
Enhancement Of The Refrigerant Capacity In Low Level Boron Doped La0.8gd0.2fe11.4si1.6, P Shamba, R Zeng, Jianli Wang, S J. Campbell, S X. Dou
Enhancement Of The Refrigerant Capacity In Low Level Boron Doped La0.8gd0.2fe11.4si1.6, P Shamba, R Zeng, Jianli Wang, S J. Campbell, S X. Dou
Jianli Wang
The effects of boron doping on the itinerant-electron metamagnetic (IEM) transition and the magnetocaloric effects (MCEs) in the cubic NaZn13-type La0.8Gd0.2Fe11.4Si1.6 compound have been investigated. The Curie temperature, TC, of La0.8Gd0.2Fe11.4Si1.6Bx compounds with x=0, 0.03, 0.06, 0.2 and 0.3 was found to increase from 200 K to 222 K with increase in boron doping, x. The maximum values of the isothermal magnetic entropy change, ΔSM, (derived using the Maxwell relation for a field change ΔB=0-5 T) in La0.8Gd0.2Fe11.4Si1.6Bx with x=0, 0.03, 0.06, 0.2 and 0.3 are 14.8, 16, 15, 7.5 and 6.6 J kg−1 K−1 respectively, with corresponding values of …
Enhancement Of The Refrigerant Capacity In Low Level Boron Doped La0.8gd0.2fe11.4si1.6, P Shamba, R Zeng, Jianli Wang, S J. Campbell, S X. Dou
Enhancement Of The Refrigerant Capacity In Low Level Boron Doped La0.8gd0.2fe11.4si1.6, P Shamba, R Zeng, Jianli Wang, S J. Campbell, S X. Dou
Shi Xue Dou
The effects of boron doping on the itinerant-electron metamagnetic (IEM) transition and the magnetocaloric effects (MCEs) in the cubic NaZn13-type La0.8Gd0.2Fe11.4Si1.6 compound have been investigated. The Curie temperature, TC, of La0.8Gd0.2Fe11.4Si1.6Bx compounds with x=0, 0.03, 0.06, 0.2 and 0.3 was found to increase from 200 K to 222 K with increase in boron doping, x. The maximum values of the isothermal magnetic entropy change, ΔSM, (derived using the Maxwell relation for a field change ΔB=0-5 T) in La0.8Gd0.2Fe11.4Si1.6Bx with x=0, 0.03, 0.06, 0.2 and 0.3 are 14.8, 16, 15, 7.5 and 6.6 J kg−1 K−1 respectively, with corresponding values of …
Deposition Of Stellite 6 On Nickel Superalloy And Mild Steel Substrates With Laser Cladding, Alain Kusmoko, Druce P. Dunne, Huijun Li, David J. Nolan
Deposition Of Stellite 6 On Nickel Superalloy And Mild Steel Substrates With Laser Cladding, Alain Kusmoko, Druce P. Dunne, Huijun Li, David J. Nolan
Faculty of Engineering and Information Sciences - Papers: Part A
Stellite 6 was deposited by laser cladding of two different steel substrates (nickel superalloy and mild steel). The chemical compositions and microstructures of these coatings were characterized by atomic absorption spectroscopy, optical microscopy and scanning electron microscopy. The microhardness of the coatings was measured and the wear mechanism of the coatings was examined using a pin-on-plate (reciprocating) wear testing machine. The results showed less cracking and pore development for Stellite 6 coatings applied to the mild steel (MS) substrate. Further, the Stellite coating on mild steel was significantly harder than that deposited on the superalloy. The wear test results showed …
Enhancement Of The Refrigerant Capacity In Low Level Boron Doped La0.8gd0.2fe11.4si1.6, P Shamba, R Zeng, Jianli Wang, S J. Campbell, S X. Dou
Enhancement Of The Refrigerant Capacity In Low Level Boron Doped La0.8gd0.2fe11.4si1.6, P Shamba, R Zeng, Jianli Wang, S J. Campbell, S X. Dou
Faculty of Engineering and Information Sciences - Papers: Part A
The effects of boron doping on the itinerant-electron metamagnetic (IEM) transition and the magnetocaloric effects (MCEs) in the cubic NaZn13-type La0.8Gd0.2Fe11.4Si1.6 compound have been investigated. The Curie temperature, TC, of La0.8Gd0.2Fe11.4Si1.6Bx compounds with x=0, 0.03, 0.06, 0.2 and 0.3 was found to increase from 200 K to 222 K with increase in boron doping, x. The maximum values of the isothermal magnetic entropy change, ΔSM, (derived using the Maxwell relation for a field change ΔB=0-5 T) in La0.8Gd0.2Fe11.4Si1.6Bx with x=0, 0.03, 0.06, 0.2 and 0.3 are 14.8, 16, 15, 7.5 and 6.6 J kg−1 K−1 respectively, with corresponding values of …
Experience In The Application Of Iec/Tr 61000-3-6 To Harmonic Allocation In Transmission Systems, T J. Browne, V J. Gosbell, S Perera, D A. Robinson, L M. Falla, P J. Windle, A C. D Perera
Experience In The Application Of Iec/Tr 61000-3-6 To Harmonic Allocation In Transmission Systems, T J. Browne, V J. Gosbell, S Perera, D A. Robinson, L M. Falla, P J. Windle, A C. D Perera
Faculty of Engineering and Information Sciences - Papers: Part A
Technical report IEC/TR 61000-3-6 is widely used as a guide to harmonic management in HV and MV networks, assisting in coordination of harmonic levels between utility and customer. In 2001, Australia and New Zealand adopted the harmonic standard AS/NZS 61000.3.6, which closely follows the above IEC technical report. As a result, transmission utilities and connected loads are required by government regulations to abide by the harmonic allocations set by the standard. The technical report contains some useful general principles which can be applied to the harmonic management of power systems. However, unexpected difficulties can be found when attempts are made …