Science and Technology Studies Commons^™

Research Incentive Programs For Closures Of Public And Private Grade Crossings, Julius Codjoe

Publications

Vehicle-train crashes that occur at highway-rail crossings result in injuries, fatalities, and damage to equipment. In order to reduce the number of vehicle-train crashes, Federal Railroad Administration requires states which have challenges with crossing safety, including Louisiana, to develop a State Action Plan to improve grade crossing safety. Consequently, identification of specific solutions for improving safety at crossings was included in the 2015 Louisiana Transportation Plan as one of its objectives. This study seeks to identify and evaluate current and new incentive programs that encourage closure of at-grade railroad crossings to reduce the number of potential vehicle-train collision points, and …

Table Of Contents Jitim Vol 27 Issue 3, 2018

Journal of International Technology and Information Management

Table of Contents

The Relationship Between Organizational Resources And Green It/S Adoption: A Rbv Approach, Lutfus Sayeed, Alberto Onetti

Journal of International Technology and Information Management

ABSTRACT

The objective of the present study was to empirically explore the impact of the implementation of Green IT/S measures on organizational resources in the US and European firms. The study examined the influence of reconfiguration of resources within a firm while adopting various Green IT/S practices and technologies. Green IT/S implementation requires resource commitment from organizations (Bose and Luo, 2011). What are these resources and how do they affect the extent of Green IT/S measures adopted by businesses? Resource Based View (RBV) of the firm was used as the theoretical framework of the study. The relationship between the adoption …

Crude Oil Prices Forecasting: Time Series Vs. Svr Models, Xin James He

Journal of International Technology and Information Management

This research explores the weekly crude oil price data from U.S. Energy Information Administration over the time period 2009 - 2017 to test the forecasting accuracy by comparing time series models such as simple exponential smoothing (SES), moving average (MA), and autoregressive integrated moving average (ARIMA) against machine learning support vector regression (SVR) models. The main purpose of this research is to determine which model provides the best forecasting results for crude oil prices in light of the importance of crude oil price forecasting and its implications to the economy. While SVR is often considered the best forecasting model in …

Research On Safety Management Of Maritime Autonomous Surface Ships, Kangqun Chen

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.

Enhancing Trust In The Cryptocurrency Marketplace: A Reputation Scoring Approach, Dan Freeman, Tim Mcwilliams, Sudip Bhattacharyya, Craig Hall, Pablo Peillard

SMU Data Science Review

Trust is paramount for the effective operation of any monetary system. While the distributed architecture of blockchain technology on which cryptocurrencies operate has many benefits, the anonymity of users on the blockchain has provided criminal users an opportunity to hide both their identities and illicit activities. In this paper, we present a scoring mechanism for cryptocurrency users where the scores represent users’ trustworthiness as safe or risky transactors in the cryptocurrency community. In order to distinguish law-abiding users from potential threats in the Bitcoin marketplace, we analyze historical thefts to profile transactions, classify them into risky and non-risky categories using …

Yelp’S Review Filtering Algorithm, Yao Yao, Ivelin Angelov, Jack Rasmus-Vorrath, Mooyoung Lee, Daniel W. Engels

SMU Data Science Review

In this paper, we present an analysis of features influencing Yelp's proprietary review filtering algorithm. Classifying or misclassifying reviews as recommended or non-recommended affects average ratings, consumer decisions, and ultimately, business revenue. Our analysis involves systematically sampling and scraping Yelp restaurant reviews. Features are extracted from review metadata and engineered from metrics and scores generated using text classifiers and sentiment analysis. The coefficients of a multivariate logistic regression model were interpreted as quantifications of the relative importance of features in classifying reviews as recommended or non-recommended. The model classified review recommendations with an accuracy of 78%. We found that reviews …

Determination Of Takeoff And Landing Distances Using An Ipad Performance Application For The Diamond Da40, Tyler A. Babb, Christina Hiers

International Journal of Aviation, Aeronautics, and Aerospace

All pilots are required to calculate aircraft performance parameters prior to flight. This includes takeoff and landing distances. Traditionally, pilots in training have planned for takeoff and landing performance using paper charts provided by the manufacturer. However, professional pilots use devices such as Flight Management Systems (FMS), Electronic Flight Bag (EFB) applications, or on-board performance computers (OPC) to make such calculations. During primary flight training, student pilots could make performance calculations with proper software, similar to the method they will typically use at the professional level. Recently an iPad application was released which can calculate numerous performance parameters for specific …

Book Review: Fundamentals Of International Aviation, Alan Bender

International Journal of Aviation, Aeronautics, and Aerospace

Not applicable.

Incorporating Diegetic Elements To Increase Engagement In Games For Engineering Education, Katherine Smith, Yuzhong Shen, Anthony W. Dean

VMASC Publications

One of the difficulties in developing educational games is maintaining player engagement. This engagement is critical for games to provide effective learning experiences. One way to increase engagement in games is to limit interruptions during game play. In educational games, this can be accomplished by incorporating learning or problem-solving elements diegetically. Diegetic elements are those that are part of the game scene. With this in mind, a series of games for Science, Technology, Engineering, and Mathematics (STEM) education has been developed focusing on content in courses that are prerequisites to the engineering curriculum. These games cover topics in pre-calculus, calculus, …

Desalination Concentrate Disposal: Ecological Effects And Sustainable Solutions, Ryan Hanley

Global Honors Theses

Freshwater availability is a growing global concern, and desalination is often presented as the solution, but from this important technology comes issues of toxic waste. Ecosystems are delicate areas that contain species adapted to that specific location, and any chemical or physical changes can disrupt the fitness of species. The concentrate byproduct waste from desalination plants is toxic to species if the concentrate is not compatible with the receiving water body. A critical review of scientific articles, industry-leading books, conversations with industry experts, and information from the American Membrane Technology Association conference was used to analyze the current knowledge. Species …

Sensor Technologies For Intelligent Transportation Systems, Juan Guerrero-Ibáñez, Sherali Zeadally, Juan Contreras-Castillo

Information Science Faculty Publications

Modern society faces serious problems with transportation systems, including but not limited to traffic congestion, safety, and pollution. Information communication technologies have gained increasing attention and importance in modern transportation systems. Automotive manufacturers are developing in-vehicle sensors and their applications in different areas including safety, traffic management, and infotainment. Government institutions are implementing roadside infrastructures such as cameras and sensors to collect data about environmental and traffic conditions. By seamlessly integrating vehicles and sensing devices, their sensing and communication capabilities can be leveraged to achieve smart and intelligent transportation systems. We discuss how sensor technology can be integrated with the …

Compressive Behaviour Of Square Fibre-Reinforced Polymer-Concrete-Steel Hybrid Multi-Tube Concrete Columns, Chun Wa Chan, Tao Yu, Shi Shun Zhang

Faculty of Engineering and Information Sciences - Papers: Part B

Fibre-reinforced polymer-concrete-steel hybrid multi-tube concrete columns are a new form of columns recently proposed at the University of Wollongong. An multi-tube concrete column consists of an external fibre-reinforced polymer tube and a number of circular internal steel tubes, with the space inside all the tubes filled with concrete. This article presents the first ever experimental study on square multi-tube concrete columns. The experimental program included a total of 14 stub column specimens tested under axial compression, with the test variables being the thickness of the external fibre-reinforced polymer tube, and the dimensions and configuration of the internal steel tubes. The …

Common Carriage’S Domain, Christopher S. Yoo

All Faculty Scholarship

The judicial decision invalidating the Federal Communications Commission's first Open Internet Order has led advocates to embrace common carriage as the legal basis for network neutrality. In so doing, network neutrality proponents have overlooked the academic literature on common carriage as well as lessons from its implementation history. This Essay distills these learnings into five factors that play a key role in promoting common carriage's success: (1) commodity products, (2) simple interfaces, (3) stability and uniformity in the transmission technology, (4) full deployment of the transmission network, and (5) stable demand and market shares. Applying this framework to the Internet …

Influence Of Steel Fibres On The Behaviour Of Rpc Circular Columns Under Different Loading Conditions, Ahmed Al-Tikrite, Muhammad N. S Hadi

Faculty of Engineering and Information Sciences - Papers: Part B

An experimental program was conducted to investigate the effect of inclusion of steel fibres on the behaviour of Reactive Powder Concrete (RPC) columns. Three different types of steel fibre were used: micro straight steel fibre (MF), macro deformed steel fibre (DF) and waste steel fibre (WF) recovered from discarded tyres. In addition, a hybridization of steel fibres was made up to produce waste-industrial hybridization (WHF) (MF, DF and WF). Twenty reinforced RPC column specimens were prepared and tested under axial concentric, eccentric and flexural loading. Results of testing demonstrated that the ultimate axial load and the corresponding axial deformation increased …

Mechanical Properties And Microstructure Of A Ti-6al-4v Alloy Subjected To Cold Rolling, Asymmetric Rolling And Asymmetric Cryorolling, Hai Liang Yu, Ming Yan, Jintao Li, Ajit R. Godbole, Cheng Lu, Anh Kiet Tieu, Hui Jun Li, Charlie Kong

Faculty of Engineering and Information Sciences - Papers: Part B

The mechanical properties of the Ti-6Al-4V alloy are significantly determined by the process used for manufacture. In this study, the mechanical properties of the Ti-6Al-4V alloy manufactured using cold rolling, asymmetric rolling and asymmetric cryorolling were characterized by subjecting it to the tensile test and the microhardness test. The evolution in the microstructure was studied using scanning electron microscopy, transmission electron microscopy as well as energy dispersive X-ray spectrometry. Results show that the Ti-6Al-4V alloy sheets subjected to asymmetrical cryorolling with low rolling speed ratio between the upper and lower rolls have the highest tensile strength and microhardness. The tensile …

Behaviour Of Carbon Fibre-Reinforced Polymer-Confined Hollow Circular Concrete Columns With Inner Polyvinyl Chloride Tube, Hussamaldeen Goaiz, Tao Yu, Muhammad N. S Hadi

Faculty of Engineering and Information Sciences - Papers: Part B

Existing studies have shown that the use of an inner tube can significantly enhance the effectiveness of confinement in fibre-reinforced polymer-confined hollow columns. The inner tube used in the existing studies, however, generally had a large stiffness and also served as longitudinal reinforcement. The use of a stiff inner tube is inefficient in resisting bending for hollow columns with a relatively small void and may be unnecessary for constraining the inner surface of concrete. Against this background, this article presents the first experimental study on fibre-reinforced polymer-confined hollow columns with an inner polyvinyl chloride tube. The experimental program included a …

Efficient Cost Aggregation For Feature-Vector-Based Wide-Baseline Stereo Matching, Xiaoming Peng, Abdesselam Bouzerdoum, Son Lam Phung

Faculty of Engineering and Information Sciences - Papers: Part B

In stereo matching applications, local cost aggregation techniques are usually preferred over global methods due to their speed and ease of implementation. Local methods make implicit smoothness assumptions by aggregating costs within a finite window; however, cost aggregation is a time-consuming process. Furthermore, most existing local methods are based on pixel intensity values, and hence are not efficient with feature vectors used in wide-baseline stereo matching. In this paper, a new cost aggregation method is proposed, where a Per-Column Cost matrix is combined with a feature-vector-based weighting strategy to achieve both matching accuracy and computational efficiency. Here, the proposed cost …

Local Buckling Of Steel Plates In Concrete-Filled Steel Tubular Columns At Elevated Temperatures, Ghanim Mohammed Kamil, Qing Quan Liang, Muhammad N. S Hadi

Faculty of Engineering and Information Sciences - Papers: Part B

Local buckling remarkably reduces the strength of steel plates in rectangular thin-walled concrete-filled steel tubular (CFST) columns at ambient temperature. This effect is more remarkable at elevated temperature. However, there have been very limited experimental and numerical investigations on the local and post-local buckling behavior of steel plates in CFST columns at elevated temperatures. This paper presents numerical studies on the local and post-local buckling behavior of thin steel plates under stress gradients in rectangular CFST columns at elevated temperatures. For this purpose, finite element models are developed, accounting for geometric and material nonlinearities at elevated temperatures. The initial geometric …

A Construction For {0,1,-1} Orthogonal Matrices Visualized, N A. Balonin, Jennifer Seberry

Faculty of Engineering and Information Sciences - Papers: Part B

No abstract provided.

The Effects Of Forced Interpass Cooling On The Material Properties Of Wire Arc Additively Manufactured Ti6al4v Alloy, Bintao Wu, Zengxi Stephen Pan, Donghong Ding, Dominic Cuiuri, Hui Jun Li, Zhenyu Fei

Faculty of Engineering and Information Sciences - Papers: Part B

To achieve improved microstructure and mechanical properties, an innovative wire arc additive manufacturing (WAAM) process with forced interpass cooling using compressed CO₂ was employed in this study to fabricate Ti6Al4V thin-walled structures. The effects of various interpass temperatures and rapid forced cooling on deposition geometry, surface oxidation, microstructural evolution, and mechanical properties of the fabricated part were investigated by laser profilometry, optical microscopy (OM), scanning electron microscopy (SEM), hardness testing and mechanical tensile testing. Results show that the microstructural evolution and mechanical properties of the deposited metal are not greatly affected by an increasing interpass temperature, however, the deposited …

Shift-Tail Equivalence And An Unbounded Representative Of The Cuntz-Pimsner Extension, Magnus Goffeng, Bram Mesland, Adam C. Rennie

Faculty of Engineering and Information Sciences - Papers: Part B

We show how the fine structure in shift-tail equivalence, appearing in the non-commutative geometry of Cuntz-Krieger algebras developed by the first two listed authors, has an analogue in a wide range of other Cuntz-Pimsner algebras. To illustrate this structure, and where it appears, we produce an unbounded representative of the defining extension of the Cuntz-Pimsner algebra constructed from a finitely generated projective bi-Hilbertian module, extending work by the third listed author with Robertson and Sims. As an application, our construction yields new spectral triples for Cuntz and Cuntz-Krieger algebras and for Cuntz-Pimsner algebras associated to vector bundles twisted by an …

A New Elementary Proof Of Euler's Continued Fractions, Joseph Tonien

Faculty of Engineering and Information Sciences - Papers: Part B

A new elementary proof of Euler's continued fractions

The Impact Of Imaging Modality (Ct Vs Mri) And Patient Position (Supine Vs Prone) On Tangential Whole Breast Radiation Therapy Planning, Kylie L. Dundas, Elise M. Pogson, Vikneswary Batumalai, Geoff P. Delaney, Miriam M. Boxer, Mei Ling Yap, Verity Ahern, Christine Chan, Steven David, Marion Dimigen, Jennifer A. Harvey, Eng-Siew Koh, Karen Lim, George Papadatos, Elizabeth Lazarus, Joseph Descellar, Peter E. Metcalfe, Lois C. Holloway

Faculty of Engineering and Information Sciences - Papers: Part B

Purpose

The purpose of this study was to evaluate the impact of magnetic resonance imaging (MRI) versus computed tomography (CT)-derived planning target volumes (PTVs), in both supine and prone positions, for whole breast (WB) radiation therapy.

Methods and materials

Four WB radiation therapy plans were generated for 28 patients in which PTVs were generated based on CT or MRI data alone in both supine and prone positions. A 6-MV tangential intensity modulated radiation therapy technique was used, with plans designated as ideal, acceptable, or noncompliant. Dose metrics for PTVs and organs at risk were compared to analyze any differences …

Development And Evaluation Of An Mre-Based Absorber With Two Individually Controllable Natural Frequencies, Jie Yang, Shuaishuai Sun, J Chi, Donghong Ning, Haiping Du, Shan-Wen Zhang, Weihua Li, Shixin Mao

Faculty of Engineering and Information Sciences - Papers: Part B

Adaptive tuned mass absorbers, which are based on magnetorheological elastomer (MRE) have been widely accepted for vibration absorption due to their frequency shift capability. Wider frequency bandwidth indicates more effectiveness in reducing vibrations. In order to broaden the effective bandwidth of the MRE-based absorber, this study proposes a new design consisting of an eccentric mass. This design enables the absorber to have two natural frequencies: the rotational natural frequency and the translational one. These two natural frequencies can be controlled separately by adjusting the MRE stiffness and the eccentric length. This design not only broadens the effective bandwidth of the …

Position Control Of A Soft Prosthetic Finger With Limited Feedback Information, Solen Kumbay-Yildiz, Rahim Mutlu, Gursel Alici

Faculty of Engineering and Information Sciences - Papers: Part B

One of the challenging research questions in soft robotics is the establishment of valid mathematical models and control techniques under limited feedback conditions. A soft robotic system will typically have a continuum or monolithic body seamlessly embodying its actuation and sensing elements, accompanied by mechanical structure, and even the energy source, much like a biological system. In this study, we propose a relay sliding mode controller based on the input - output model (RSMC-IO), which is a simple but effective control approach that does not require a complete system model, to control the tip position of a soft prosthetic finger, …

Driver Intention Based Coordinate Control Of Regenerative And Plugging Braking For Electric Vehicles With In-Wheel Pmsms, Wenfei Li, Haiping Du, Weihua Li

Faculty of Engineering and Information Sciences - Papers: Part B

Electric vehicles have been the focus of the automotive industry in recent years. However, relatively small driving range of electric vehicles makes it not be broadly adopted in the market. Regenerative braking is one of the most effective ways to extend the endurance of electric vehicles. To sufficiently utilise the regenerative braking of electric vehicles and explore the potential of the electric motor plugging braking capability to simplify the braking system structure and reduce the cost, a new braking strategy based on the driver's braking intention and motor working characteristics is proposed. Driver's braking intention is classified as the emergency …

A 3d Approach For The Visualization Of Network Intrusion Detection Data, Wei Zong, Yang-Wai Chow, Willy Susilo

Faculty of Engineering and Information Sciences - Papers: Part B

With the increasing threat of cyber attacks, machine learning techniques have been researched extensively in the area of network intrusion detection. Such techniques can potentially provide a means for the real-time automated detection of attacks and abnormal traffic patterns. However, misclassification is a common problem in machine learning techniques for intrusion detection, and a lack of insight into why such misclassification occurs impedes the improvement of machine learning models. This paper presents an approach to visualizing network intrusion detection data in 3D. The purpose of this is to facilitate the understanding of network intrusion detection datasets using a visual representation …

Modeling Supply Network Configuration Problems With Varying Demand Profiles, Subodha Dharmapriya, Senevi Kiridena, Nagesh Shukla

Faculty of Engineering and Information Sciences - Papers: Part B

In this paper, we develop a novel multi-objective modeling approach to support supply network configuration decisions, while considering varying demand profiles. In so doing, we illustrate how such an approach could contribute to building supply network robustness and resilience. The proposed model entails two key objectives; minimizing lead time and cost across the supply network. The solution approach first employs a bidding mechanism to select a set of supply network entities that match with a given demand profile from a candidate pool of entities. It then applies the popular technique known as N on-dominated Sorting Genetic Algorithm-II to generate a …

Preferred Traces On C⁎-Algebras Of Self-Similar Groupoids Arising As Fixed Points, Joan Claramunt, Aidan Sims

Faculty of Engineering and Information Sciences - Papers: Part B

Recent results of Laca, Raeburn, Ramagge and Whittaker show that any self-similar action of a groupoid on a graph determines a 1-parameter family of self-mappings of the trace space of the groupoid C⁎-algebra. We investigate the fixed points for these self-mappings, under the same hypotheses that Laca et al. used to prove that the C⁎-algebra of the self-similar action admits a unique KMS state. We prove that for any value of the parameter, the associated self-mapping admits a unique fixed point, which is a universal attractor. This fixed point is precisely the trace that extends to a KMS state on …