Open Access. Powered by Scholars. Published by Universities.®
Social and Behavioral Sciences Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 11 of 11
Full-Text Articles in Social and Behavioral Sciences
Axial And Flexural Behavior Of Unreinforced And Frp Bar Reinforced Circular Concrete Filled Frp Tube Columns, Muhammad N. S Hadi, Qasim Khan, M Neaz Sheikh
Axial And Flexural Behavior Of Unreinforced And Frp Bar Reinforced Circular Concrete Filled Frp Tube Columns, Muhammad N. S Hadi, Qasim Khan, M Neaz Sheikh
Faculty of Engineering and Information Sciences - Papers: Part A
Fiber Reinforced Polymer (FRP) composites have emerged as a viable alternative of steel reinforcement due to higher ultimate tensile strength to weight ratio and corrosion resistance of FRP composites. Concrete Filled Fiber Reinforced Polymer Tube (CFFT) technique for new column construction has attracted significant research attention. This paper investigated the axial and flexural behavior of concrete filled Carbon FRP (CFRP) tube columns with and without CFRP bar and concrete filled Glass FRP (GFRP) tube columns with and without GFRP bar. The test results of 16 circular CFFT and four steel Reinforced Concrete (RC) specimens of 203-205 mm diameter and 800-812 …
Experimental Investigation Of The Behaviour Of Concrete Beams Reinforced With Gfrp Bars Under Static And Impact Loading, Matthew Goldston, Alex M. Remennikov, M Neaz Sheikh
Experimental Investigation Of The Behaviour Of Concrete Beams Reinforced With Gfrp Bars Under Static And Impact Loading, Matthew Goldston, Alex M. Remennikov, M Neaz Sheikh
Faculty of Engineering and Information Sciences - Papers: Part A
Composite materials, including Fibre Reinforced Polymer (FRP) bars, have been gaining momentum as alternatives to traditional steel reinforcements in civil and structural engineering sectors. FRP materials are non-corrosive, non-conductive, and lightweight and possess high longitudinal tensile strength, which are advantageous for their use in civil infrastructure. This paper presents the results of an experimental investigation into the effects of the use of glass FRP (GFRP) bars as internal reinforcement on the behaviour of concrete beams. Both static and dynamic (impact) behaviours of the beam have been investigated. Twelve GFRP reinforced concrete (RC) beams were designed, cast and tested. Six GFRP …
Design-Oriented Stress–Strain Model For Concrete Under Combined Frp-Steel Confinement, G Lin, Tao Yu, Jin Guang Teng
Design-Oriented Stress–Strain Model For Concrete Under Combined Frp-Steel Confinement, G Lin, Tao Yu, Jin Guang Teng
Faculty of Engineering and Information Sciences - Papers: Part A
Extensive research has been conducted on fiber-reinforced polymer (FRP)-confined plain and RC columns, leading to a large number of stress–strain models. Most of these models have been developed for FRP-confined plain concrete and are thus applicable only to concrete in FRP-confined RC columns with a negligible amount of transverse steel reinforcement. The few models that have been developed for concrete under the combined confinement of FRP and transverse steel reinforcement are either inaccurate or too complex for direct use in design. This paper presents an accurate design-oriented stress–strain model for concrete under combined FRP-steel confinement in FRP-confined circular RC columns. …
Experimental Study On Frp Tube Reinforced Concrete Columns Under Different Loading Conditions, Weiqiang Wang, M Neaz Sheikh, Muhammad N. S Hadi
Experimental Study On Frp Tube Reinforced Concrete Columns Under Different Loading Conditions, Weiqiang Wang, M Neaz Sheikh, Muhammad N. S Hadi
Faculty of Engineering and Information Sciences - Papers: Part A
The behavior of fiber-reinforced polymer (FRP) tube reinforced concrete (FTRC) columns under different loading conditions was investigated in this study. Four groups of 16 specimens were cast and tested. Specimens in the first group (the reference group) were re- inforced with longitudinal steel bars and steel helices (Group REF). Specimens in the second group were reinforced with intact glass FRP tubes (Group IT). Specimens in the third group were also reinforced with intact glass FRP tubes. In addition, polymer grid was embedded into the concrete cover to reduce the cover spalling (Group ITG). Specimens in the fourth group were reinforced …
Experimental Investigation Of Gfrp-Reinforced And Gfrp-Encased Square Concrete Specimens Under Axial And Eccentric Load, And Four-Point Bending Test, Muhammad N. S Hadi, Jim Youssef
Experimental Investigation Of Gfrp-Reinforced And Gfrp-Encased Square Concrete Specimens Under Axial And Eccentric Load, And Four-Point Bending Test, Muhammad N. S Hadi, Jim Youssef
Faculty of Engineering and Information Sciences - Papers: Part A
This paper presents the results of an experimental study on the axial and flexural behavior of square concrete members reinforced with glass fiber-reinforced polymer (GFRP) bars and embedded with pultruded GFRP structural sections under different loading conditions. The main parameters investigated in this study were the influence of the type of internal reinforcement (steel bars, GFRP bars and pultruded GFRP structural I-sections and C-sections) and magnitude of load eccentricity on the flexural and compressive behavior of square concrete members. To fulfil the objectives of this study, 16 reinforced concrete specimens were tested, of which 12 were tested as columns under …
Structural Behaviours Of Railway Prestressed Concrete Sleepers (Crossties) With Hole And Web Openings, Sakdirat Kaewunruen, Erosha Kahawatta Gamage, Alex M. Remennikov
Structural Behaviours Of Railway Prestressed Concrete Sleepers (Crossties) With Hole And Web Openings, Sakdirat Kaewunruen, Erosha Kahawatta Gamage, Alex M. Remennikov
Faculty of Engineering and Information Sciences - Papers: Part A
As the crosstie beam in railway track systems, the prestressed concrete sleepers (or railroad ties) are principally designed in order to carry wheel loads from the rails to the ground. Their design takes into account static and dynamic loading conditions. It is evident that prestressed concrete has played a significant role as to maintain the high endurance of the sleepers under low to moderate repeated impact loads. In spite of the most common use of the prestressed concrete sleepers in railway tracks, there have always been considerable demands from rail and track engineers to improve serviceability and functionality of concrete …
Modelling Railway Prestressed Concrete Sleepers (Crossties) With Holes And Web Openings, Sakdirat Kaewunruen, Erosha Kahawatta Gamage, Alex M. Remennikov
Modelling Railway Prestressed Concrete Sleepers (Crossties) With Holes And Web Openings, Sakdirat Kaewunruen, Erosha Kahawatta Gamage, Alex M. Remennikov
Faculty of Engineering and Information Sciences - Papers: Part A
Pre-stressing in concrete railway sleepers yields endurance property under high-cycle fatigue. This structural effect plays a positive role in durability of the sleepers. However, as a common practice, track engineers often generate holes or web openings in concrete sleepers to enable the accommodation of rail equipment cables and signaling equipment. This study aims to provide a principle understanding of the structural capacity and energy toughness of pre-stressed concrete sleepers with and without holes and web openings. It will investigate the design criteria and effects of holes and web openings on the structural capacity of concrete sleepers under rail loading. The …
Incorporating Environmental Evaluation And Thermal Properties Of Concrete Mix Designs, Mehdi Robati, Timothy J. Mccarthy, Georgios Kokogiannakis
Incorporating Environmental Evaluation And Thermal Properties Of Concrete Mix Designs, Mehdi Robati, Timothy J. Mccarthy, Georgios Kokogiannakis
Faculty of Engineering and Information Sciences - Papers: Part A
One of the main challenges in sustainable design of buildings is to improve the energy efficiency of the building during its lifetime along with reducing the environmental impact of the design. Recent advances in concrete technology offer lower embodied emission through the application of supplementary cementitious materials and recycled aggregates. There are also improvements to thermal properties with the application of admixtures. However, the relationships between the environmental impact (Cradle to Gate) and thermal performance of concrete mix designs have not been researched adequately. The Green House Gas (GHG) emissions associated with each individual concrete component and its production need …
Impact Resistance Of Ultra-High Strength Concrete Beams With Frp Reinforcement, Alex M. Remennikov, Matthew Goldston, M Neaz Sheikh
Impact Resistance Of Ultra-High Strength Concrete Beams With Frp Reinforcement, Alex M. Remennikov, Matthew Goldston, M Neaz Sheikh
Faculty of Engineering and Information Sciences - Papers: Part A
Composite materials, including Fibre Reinforced Polymer (FRP) bars, have been used for decades in the structural and civil engineering sectors over traditional steel reinforcement. The main reasons for this are that FRP composites possess a number of advantages. They are non-corrosive, non-conductive, and lightweight and possess high longitudinal tensile strength. This paper presents the results of an experimental investigation into the effects of the use of glass FRP (GFRP) bars as internal reinforcement on the behaviour of concrete beams with high strength concrete (HSC) and ultra-high strength concrete (UHSC). Both static and dynamic (impact) behaviours of the beam have been …
Cyclic Lateral Response Of Frp-Confined Circular Concrete-Filled Steel Tubular Columns, Tao Yu, Y M. Hu, Jin Guang Teng
Cyclic Lateral Response Of Frp-Confined Circular Concrete-Filled Steel Tubular Columns, Tao Yu, Y M. Hu, Jin Guang Teng
Faculty of Engineering and Information Sciences - Papers: Part A
Concrete-filled steel tubular (CFT) columns are widely used as columns in many structural systems and a common failure mode of such tubular columns is inelastic outward local buckling near a column end. The use of fibre-reinforced polymer (FRP) jackets/wraps for the suppression of such local buckling has recently been proposed and has been proven to possess excellent potential in both retrofit/strengthening and new construction. This paper presents the results of an experimental study into the behaviour of large-scale FRP-confined CFT (CCFT) columns under combined axial compression and lateral loading. The test parameters included the stiffness of the FRP jacket and …
Compressive Behavior Of Frp-Confined Concrete-Encased Steel Columns, Tao Yu, G Lin, Shi Shun Zhang
Compressive Behavior Of Frp-Confined Concrete-Encased Steel Columns, Tao Yu, G Lin, Shi Shun Zhang
Faculty of Engineering and Information Sciences - Papers: Part A
FRP-confined concrete-encased steel I-section columns (FCSCs) are an emerging form of hybrid columns. An FCSC consists of an outer FRP tube, an encased steel section and a concrete infill. The FCSCs possess many advantages over conventional reinforced concrete columns, including the excellent corrosion resistance, excellent ductility and ease for construction. Existing studies on FCSCs, however, have been rather limited. This paper presents a combined experimental and theoretical study on the behavior of FCSCs under concentric and eccentric compression. The experimental program included the testing of a total of 14 specimens, with the main variables being the section configuration, the thickness …