Open Access. Powered by Scholars. Published by Universities.®

Social and Behavioral Sciences Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 31 - 60 of 329

Full-Text Articles in Social and Behavioral Sciences

Ddasaccident594, Hd-Aid May 2010

Ddasaccident594, Hd-Aid

Global CWD Repository

On 04 May 2010 at 08:45 am while [the Victim] the de-miner was excavating a detected signal in his clearance lane, his bayonet hit top of an anti-personnel PMN mine and caused it to go off. According to the investigation report, it seems that the de-miner started excavation directly from the pinpointed spot with his bayonet and caused the explosion and accident. Unfortunately improper use of PPE caused catastrophic injuries to the face and eyes of the victim deminer. He has lost his right eye, traumatic amputation of right-hand fingers and sustained some superficial injures on different parts of his …


Ddasaccident595, Hd-Aid Apr 2010

Ddasaccident595, Hd-Aid

Global CWD Repository

On 9th April 2010 at 10:27 while [the Victim] was working in his clearance lane, busy in excavation drill, the accident happened and caused severe injuries to his right hand (traumatic amputation) and some minor injuries to his neck and nose. His visor was broken down and separated from headband. As per the investigation report, the deminer has breached the SOPs as dug directly down on top of the mine. It is also possible that he tried to work in a bit hurry to increase the progress. As he was fully dressed with PPE, therefore, remained save from other severe …


Ddasaccident733, Hd-Aid Mar 2010

Ddasaccident733, Hd-Aid

Global CWD Repository

On 15 March 2010 at 08:55 hrs while [the Victim] was busy in excavation of a detected signal, suddenly the accident happened. As a result the deminer got severe injuries on his face, eyes and his right hand.


Ddasaccident593, Hd-Aid Feb 2010

Ddasaccident593, Hd-Aid

Global CWD Repository

According to the investigation report the de-miner was using the scraper direct on the top of the detected signal causing it to go off. It was then found that the exploded item was a MUV fuse. As a result of the explosion, [MUV fuze] sustained injuries on his eyes, right side ear, arm and head; the injuries indicate that the de-miner was not using his visor properly.


Mid Term Evaluation Of The Mine Action Programme In Afghanistan, European Union Jan 2010

Mid Term Evaluation Of The Mine Action Programme In Afghanistan, European Union

Global CWD Repository

Elements of both projects can be seen as very successful. Overall, the UNMAS project was more successful, whereas UNDP's ANBP was seen as increasingly under-performing, and became less relevant, during this funding period. However, the work of ANBP's Implementing Partners (IPs), and in particular the HALO Trust's village level Weapons & Ammunition Disposal (WAD) programme, initially funded by ANBP, is seen as highly successful.


Ddasaccident661, Hd-Aid Dec 2009

Ddasaccident661, Hd-Aid

Global CWD Repository

At 11:30 hrs on 15th Dec 2009, [the Victim] the Team Leader of the EOD -01 was working as a deminer and trying to identify the actual mined area. While he was excavating on a signal by a pick, he hit the mine and it caused to the accident. As [the Victim] was not well prepared and fully dressed with PPE, he has got severe injures to face, eyes and forehead.


Ddasaccident765, Hd-Aid Dec 2009

Ddasaccident765, Hd-Aid

Global CWD Repository

The deminer was instructed by his Section Leader to move the UXO and place the item concerned in the demolition pit, which was located 21 metres away from the deminer’s working area / lane. On the way to the demolition pit the deminer accidentally dropped the UXO and according to the Section Leader, the deminer dropped the UXO directly on to stone that was in the ground and subsequently the UXO detonated. Timings for the accident were recorded as follows:


Ddasaccident668, Hd-Aid Nov 2009

Ddasaccident668, Hd-Aid

Global CWD Repository

On 17 Nov 2009 at 09:15 hrs when [Name removed] the land owner was trying to cultivating his land, he has discovered an AT (M-19) mine. Luckily the mine has not exploded. Later on the mine handed over to ISAF for destruction.


Ddasaccident596, Hd-Aid Nov 2009

Ddasaccident596, Hd-Aid

Global CWD Repository

The clearance operation on mentioned task was started by [Demining group] DT-12 on 1st of November 09. On 10th of November 09 at 07:40, while the second break period started, the team leader of the team asked a deminer for his scraper and then walked down to a clearance lane without informing any other team members of his intention. On 07:42 Team leader initiated a POMZ mine causing him to receive the injuries that led to his death. He ignored his job description and the [Demining group] SOPs. He may have been thinking that this POMZ is of no danger, …


Ddasaccident620, Hd-Aid Nov 2009

Ddasaccident620, Hd-Aid

Global CWD Repository

On 5th Nov 2009 at 08:45 am deminer [Victim No.1] was working in his clearance lane: he was removing excavated soil from the target spot that suddenly his excavation tool touched a mine and caused it to go off. As a result of the accident, the deminer got severe injuries to his face, eyes and left hand (lost his one eye).


Ddasaccident601, Hd-Aid Nov 2009

Ddasaccident601, Hd-Aid

Global CWD Repository

On 1st Nov 2009, at 02:45 pm during the rest time, [the Victim] a deminer of mentioned team found an unknown item and tried to touch it. According to the investigation report, the item was a rifle Grenade of 40mm which was exploded as a result of irresponsible action of the victim deminer. As it was the break time of the team and the deminer was without visor and PPE, therefore, he lost his right hand, left eye and sustained jaw and leg fracture.


Ddasaccident646, Hd-Aid Oct 2009

Ddasaccident646, Hd-Aid

Global CWD Repository

On 11 Oct 2009 at 12:15 am while [the Victim] deminer was excavating a detected signal in his clearance lane, his bayonet hit top of an anti-personnel mine and caused it to go off. According to the investigation report, it seems that the deminer started the excavation drill directly from the centre of the detected signal by his bayonet and caused the mine to be exploded. The deminer had the PPE and visor but as the visor was not properly used so he got some superficial injuries on his face, eyes.


Ddasaccident641, Hd-Aid Oct 2009

Ddasaccident641, Hd-Aid

Global CWD Repository

On 10 Oct 2009 at 11:20 hrs when [the Victim] deminer was working in his clearance lane with a pickaxe that suddenly an explosion happened. As per investigation report the deminer was using pickaxe instead of bayonet because the ground surface was hard. He started to prepare a trench by pickaxe from second reading marker for further investigation of the signal, but there was a stone in close vicinity of pinpointed spot and the deminer wanted to remove it, so his pickaxe might touched the PMN mine or the stone put extra pressure on the mine and the explosion happened. …


Ddasaccident613, Hd-Aid Oct 2009

Ddasaccident613, Hd-Aid

Global CWD Repository

On 04 Oct 2009 at 08:35 hrs when [the Victim] deminer was working on a signal in his clearance lane using a pickaxe, he hit the mine on its top and caused it to go off. According to the investigation report the ground surface was hard and the deminer was using the pick without informing his section leader with a wrong procedure for excavation of the detected signal, and caused the mine to be exploded. As a result of the accident, the involve deminer got superficial injures on his face and body.


Ddasaccident657, Hd-Aid Sep 2009

Ddasaccident657, Hd-Aid

Global CWD Repository

On 14 September 2009, a deminer of CBDT-06 was busy in his clearance lane, he detected an unknown device and informed his respective section leader who had 18 year demining experience to check it. The section leader took the device with his left hand from the clearance lane, he started to remove the soil from it, but in this time it was exploded and caused injuries to his left hand fingers. Unprofessional dealing with unknown device caused this accident.


Ddasaccident624, Hd-Aid Sep 2009

Ddasaccident624, Hd-Aid

Global CWD Repository

The primary cause of this accident is listed as a Field Control inadequacy because the investigators found that there was poor supervision at the time of the accident. The secondary cause is listed as Other because there is not enough detail in the summary to determine what the deminer was doing, and what tool he was using.


Ddasaccident702, Hd-Aid Aug 2009

Ddasaccident702, Hd-Aid

Global CWD Repository

On 28 July 2009 at 08:10 hrs when Ahmed de-miner was working on a signal in his clearance lane by using a pickaxe instead of bayonet, he hit the mine on its top and caused it to go off. According to the investigation report the ground surface was uneven, hard and impossible to work in sitting position, so he has started to investigate the signal in standing position. This was the main reason of initiating mine and accident.


Ddasaccident649, Hd-Aid Aug 2009

Ddasaccident649, Hd-Aid

Global CWD Repository

On 13 August 2009 at 07:15 am while [the victim] deminer was excavating a excavating a dog indication in an access lane, his pick touched on the top of PMN 2 anti-personnel mine and caused it to go off. According to the investigation report the deminer has used the pickaxe to investigate the signal found in dog indication instead of the bayonet and it seems as he used the pick directly on the top of signal, so hit the mine and caused the accident. From the location of injuries it seems the deminer has not used his PPE and visor …


Ddasaccident681, Hd-Aid Jul 2009

Ddasaccident681, Hd-Aid

Global CWD Repository

On 21 July 2009 while deminer [the Victim] was working in his clearance lane, investigating a detected signal with his hand trowel, he hit a mine on its top and caused it to go off. The weather was hot and the ground surface was hard and dry, so it seems that the deminer had used his excavation tool by force and carelessly and directly on pinpointed spot so touched the top of mine and caused the accident. As the deminer was dressed with PPE (vest, helmet and visor according to [Demining group] SOPs), so his face, neck and chest remained …


Ddasaccident752, Hd-Aid Jul 2009

Ddasaccident752, Hd-Aid

Global CWD Repository

On 1st July 2009 MU-16 of [Demining group] started clearance operation on mentioned task. On 08 July 2009 at 0919hrs while [the Victim] was investigating a signal in his clearance lane, he found two bullets. He re-checked the spot and found the same signal, this process repeated for three times. Finally he found a root stump in the excavation trench with a thickness of around 2.5 cm and started to remove it, because it was blocking further excavation there. However the deminer had proper tool in his toolkit to cut such obstacles, but he tried to cut it with his …


Ddasaccident712, Hd-Aid Jun 2009

Ddasaccident712, Hd-Aid

Global CWD Repository

On 18 April 2009 [Demining group] DT-05 started clearance operation on mentioned task, they cleared around 19830 sqm area and found/destroyed 4 anti-personnel mines and 2 UXO till the accident time. On 27 June 2009 at 11:15 am the deminer [the Victim] was working in his clearance lane, he found a signal behind some stones, the investigation of signal was impossible with bayonet so he informed the section leader and sought his advice. Section leader instructed him to use pick, but a stone in front of pinpointed signal did not let the pick to be used easily. Therefore, the deminer …


Ddasaccident686, Hd-Aid Jun 2009

Ddasaccident686, Hd-Aid

Global CWD Repository

On 1st of June [Demining group] started clearance operation on mentioned task, they cleared 3350 sqm and found/destroyed 150 anti-personnel and 90 UXO till the accident time. On 23 June 2009 at 08:40 am when [the Victim] was working in his clearance lane a PMN2 antipersonnel mines went off and caused the accident. However the deminer had worn his PPE but he got some injures on his both legs, fortunately the injuries were not severe. According to the investigation report the ground was hard to conduct excavation easily, however the MDU was used for ground preparation, but it was failed …


Ddasaccident734, Hd-Aid Jun 2009

Ddasaccident734, Hd-Aid

Global CWD Repository

[Demining group] is subcontracted by US-DOD for mine clearance in Bagram Air Field. On 15 June 2009, when the [Demining group] US-DOD related team was working on a BAC task inside the BAF, experienced an uncontrolled detonation. The accident happened when [the Victim] the deminer was excavating a detected signal using a small pick; he found a metal plate and decided to excavate beneath the metal plate, during the excavation drill his excavation tool might touched the mine and caused it to go off.


Ddasaccident633, Hd-Aid Jun 2009

Ddasaccident633, Hd-Aid

Global CWD Repository

AF/2008/00324/H4533-13 is an anti-personnel mine contaminated area laid by the government forces during the Russian invasion in Afghanistan. The mines are laid in 2 rows as a belt surrounding Kandak-e-921 Sarhadi in order to secure their positions from the attacks of Mujahedeen. [Demining group] DT-18 was tasked for the clearance of mentioned area, on 9th of June 2009 at 07:55 am deminer [Victim No.1] was working in his clearance lane excavating a detected signal, his prodder touched a mine and caused it to explode. According to the investigation report the signal was not pinpointed correctly and the deminer has used …


Ddasaccident757, Hd-Aid Jun 2009

Ddasaccident757, Hd-Aid

Global CWD Repository

On 07 June 1035 hours [the Victim] the section leader of mentioned team stopped his deminer [Name removed] and started to work instead of him as the deminer was getting tired. He hit the top of a mine with his prodding tool so the accident occurred. There is a wound with regular edges on the forehead of section leader and some abrasions on his face and left eye. The PPE was used during the operation, but the visor was broken down by a forceful back out of excavation tool possibly the shovel and caused the injury to him. According to …


Ddasaccident711, Hd-Aid May 2009

Ddasaccident711, Hd-Aid

Global CWD Repository

On 27 May 2009 at 0840 hrs [the Victim] the section leader of [Demining group] DT-16 entered to a mined area which was not covered in current MF, stepped on a mine and caused the accident. According to the investigation report the section leader left the site for admin area in order to bring painted rocks for the marking purpose, on the way back from the admin area he wanted to use the shortest way, entered to unsafe area and the accident occurred. He had taken off his PPE and visor. As a result of accident the victim has lost …


Ddasaccident744, Hd-Aid May 2009

Ddasaccident744, Hd-Aid

Global CWD Repository

On 11 May 2009 at 09:20 the de-miner [the Victim] was excavating a detected signal in his clearance lane, he stroked the top of a PMN2 mine with his bayonet and the accident happened. As the ground profile is uneven and the accident occurred in an area where the extra soil is brought by seasonal floods and the depth of mine was around 25cm. The deminer failed to go deeper as per procedure and discover the mine properly, so he stroked the mine and caused the accident. According to the investigation report and the pictures of victim deminer the visor …


Ddasaccident748, Hd-Aid May 2009

Ddasaccident748, Hd-Aid

Global CWD Repository

On 10 May 2009 at 10:35 [the Victim] the deminer of [Demining group] DT-02 was excavating on a detected signal in his clearance lane where he hit the top of an anti-personnel mine by bayonet and it caused the mine going off. The procedure of investigating a pinpointed signal was ignored by this deminer and he was working carelessly. As a result this accident the deminer got several injuries to different parts of body i.e. both hands and thighs. The deminer had only used the jacket of his PPE without skirt. If he would wear the skirt too, his lower …


Ddasaccident754, Hd-Aid May 2009

Ddasaccident754, Hd-Aid

Global CWD Repository

On 07th of May at 10:00 hours the de-miner [the Victim] was working in his clearance lane excavating a detected signal by unsuitable excavation tool (Pick). He hit the top of mine with a pick and caused it to go off. According to the investigation report the signal was not pinpointed correctly and the de-miner has used his pick carelessly. As a result he sustained multiple superficial injuries on his eyes, chest, Face, and both hands, the injured parts of the deminer body and his PPE clearly indicate that he had not used his PPE during operation. Because there is …


Ddasaccident760, Hd-Aid May 2009

Ddasaccident760, Hd-Aid

Global CWD Repository

According to the investigation report and as seems from the pictures of scene, the deminer was working with a big shovel. On 19th of April 09 one of the MACCA operations assistant found the team using big shovel and raised a non-conformity report, but the team leader and then the operations officer of [Demining group] did not accept the non-conformity report. However the problem was showed to be solved during the re-audit visits, but in reality it had not been solved and consequently the accident occurred.