Social and Behavioral Sciences Commons^™

Technocene, Vir Joseph Naidu

Masters Theses

Embodied human communication within the Anthropocene. Existing at the intersection of technology, and the body.

The design industry has developed technology that is, paradoxically, isolating. The exposure to a vast audience in the digital sphere has introduced new societal pressures, leading to a disconnection from our immediate surroundings, detached, and donning metaphorical masks. Technocene lives on the fringes of the discipline by blending conceptual thinking with practical application. Through curious, experimental artifacts, it prompts us to shed our masks and embrace vulnerability. Technocene endeavors to reimagine the human experience by acting as a discursive design project. It probes the boundaries …

Dynamic Impact Testing And Numerical Analysis Of Non-Proprietary Astm F2656-20 M50 Anti-Ram Barrier Components, Weston Kelley

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

In a post-9/11 world, hostile actors are using vehicles as weapons to inflict civilian casualties. Pedestrians, vulnerable road users, military personnel, and police may be targeted using a vehicle as a weapon. The United States Department of Defense (DoD) also utilizes Entry Control Facilities (ECFs) which are carefully designed transportation corridors to manage how threat vehicles are able to access military facilities. In 2004, DoD started to upgrade all ECFs using both passive and active barriers. Many anti-ram vehicle barriers were evaluated according to the criteria established in ASTM F2656, but to date few options are available which are (1) …

Safety Evaluation Of Hawaii Dot Modified Type A-1 Flared Buried In Backslope Guardrail End Terminal, Sina Changizian

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The Hawaii Department of Transportation (HDOT) desired to evaluate the crashworthiness of a guardrail end terminal design in which the upstream guardrail anchorage was connected to a block partially buried in a cut slope, known as a “Buried in Backslope” or BIB design. The HDOT BIB system used an upper W-beam with 8-in. deep blockouts attached to W6x9 steel posts and a lower W-beam rubrail located 3 in. below the upper rail. The system used two horizontal flares: 7.4:1 near the upstream anchor block and a 13:1 flare through the ditch.

Critical impact points (CIPs) were identified and recommended for …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Thermomechanical Properties Of Neutron Irradiated Al3Hf-Al Thermal Neutron Absorber Materials, Donna Post Guillen, Mychailo B. Toloczko, Ramprashad Prabhakaran, Yuanyuan Zhu, Yu Lu, Yaqiao Wu

CAES Energy Policy Institute Faculty Publications and Presentations

A thermal neutron absorber material composed of Al₃Hf particles in an aluminum matrix is under development for the Advanced Test Reactor. This metal matrix composite was fabricated via hot pressing of high-purity aluminum and micrometer-size Al₃Hf powders at volume fractions of 20.0, 28.4, and 36.5%. Room temperature tensile and hardness testing of unirradiated specimens revealed a linear relationship between volume fraction and strength, while the tensile data showed a strong decrease in elongation between the 20 and 36.5% volume fraction materials. Tensile tests conducted at 200 °C on unirradiated material revealed similar trends. Evaluations were then …

The Neighborhood As An Energy-Generating Community The Case Of El-Banafseg Residential Neighborhood, East Cairo, Mona Helmy, Amany Micheal

Architectural Engineering

No abstract provided.

Entre Punzones Y Percutores Reconstrucción De Tecnología Ósea De Los Selk'nam (Tierra Del Fuego), Rachel Dietz

Independent Study Project (ISP) Collection

Esta investigación se enfoca en el estudio, reconstrucción y uso de la tecnología ósea empleada por las sociedades cazadoras-recolectoras-pedestres que ocuparon el litoral Atlántico de Tierra del Fuego, durante el Holoceno, específicamente se enfoca en la tecnología utilizada por los Selk´nam del Norte de Tierra del Fuego. La tecnología ósea fue una parte importante de su cultura y dos tipos fueron elegidos para investigar: percutores blandos y punzones huecos. Los percutores blandos fueron confeccionados sobre huesos de guanaco, un recurso importante para las sociedades cazadoras-recolectoras.

Los percutores blandos fueron usados para la formatización de artefactos líticos a través de la …

Launching A 3d Printing Program For Students: Recommendations And Best Practices For Libraries, Wilhelmina Randtke, Lee Bareford

Georgia Library Quarterly

The Georgia Southern University Libraries launched a 3D printing program for students in July 2022. Prior to launch, library employees at two of Georgia Southern University’s campuses investigated options for implementing safe, affordable, and sustainable 3D printing in existing academic libraries without retrofitting costly ventilation systems into existing facilities. This article describes the reasons why the Georgia Southern University Libraries thought that a 3D printing program could fulfill a service need for students across university colleges and departments and outlines some of the challenges, best practices, and unique innovations that the library’s employees experienced throughout the program launch process. The …

Do Agrivoltaics Improve Public Support For Solar? A Survey On Perceptions, Preferences, And Priorities, Alexis Pascaris, Chelsea Schelly, Mark Rouleau, Joshua Pearce

Michigan Tech Publications

Agrivoltaic systems integrate agricultural production with solar photovoltaic electricity generation. Given the proven technical, economic, and environmental co-benefits provided by agrivoltaic systems, increased proliferation is anticipated, which necessitates accounting for the nuances of community resistance to solar development on farmland and identifying pathways for mitigation. Minimizing siting conflict and addressing agricultural communities’ concerns will be key in continued deployment of agrivoltaics, as localized acceptance of solar is a critical determinant of project success. This survey study assessed if public support for solar development increases when energy and agricultural production are combined in an agrivoltaic system. Results show that 81.8% of …

A Circular Economy Approach To Improve E-Waste Recycling In California: Economic Potential And Policy Options, Kripa Shah

Master's Projects and Capstones

The higher consumption rates of electronic devices along with their short life cycles and few repair options poses a huge challenge for E-waste industries to manage them effectively. E-waste comprises of hazardous materials and toxic constituents that can affect the environment and public health through improper disposal. However, they also contain few valuable materials that, if recovered, can reduce the dependence on virgin raw materials. Circular economy has the potential to utilize these valuable materials and gain environment and socio-economic benefits. The research explains how the adoption of a circular economy approach can help improve the E-waste recycling in California …

Isolation And Production Of Tandem Collagen Binding Domain From Clostridial Collagenase Colg And Developments In C1q Reagent Production For Future Molecule Characterization Work, Stephanie Beitle

Chemical Engineering Undergraduate Honors Theses

This thesis covers a two part project: the production methods to create a double collagen binding domain molecule with a growth factor for wound healing applications and the development of a new in-house production method for isolating C1q from bovine blood. The wound healing molecule was created using transformation, sonication, and purification before being tested via electrophoresis SDS page and Western blots to confirm the molecule’s presence. The C1q in-house production method utilizes an ultrafiltration flow cell rather than dialysis at a critical point in the process, allowing for researchers to not only be able to use a single small …

Enhancing Stability Of High-Nickel Cathodes For Lithium-Ion Batteries Through Additive Manufacturing Of Cathode Structure, Matthew Sullivan

Mechanical Engineering Undergraduate Honors Theses

Lithium-ion batteries (LIBs) are currently the best method to store electrical energy for use in portable electronics and electronic vehicles. New cathode materials for LIBs are consistently studied and researched, but few are as promising and attainable as nickel-rich transition metal oxides such as LiNi1-x-yMnxCoyO2 (NMC). NMC materials exist with many different mass ratios, but higher nickel content materials provide higher energy density. With this increase in capacity comes a sacrifice with cyclability, as high-nickel NMC variants are prone to structure collapse, transition metal dissolution, and cracks due to volume change. In this report, mechanical modification of the electrode by …

Synthesis And Phase Transition Characterization Of Liquid Crystal Membranes With Slit-Like Pores, Isaac Hopwood

Chemical Engineering Undergraduate Honors Theses

Membranes with slit-like pores have been of interest for some time due to their ability to reject smaller particles than traditional cylindrical-pored membranes at the same fluid flux. However, using liquid crystals as a template for this sort of membrane has not been thoroughly investigated. In this study, the liquid crystal mixture of RM257 (2-Methyl-1,4-phenylene bis(4-(3-(acryloyloxy)propoxy)benzoate)) and 5CB (4-Cyano-4'-pentylbiphenyl) for the purpose of manufacturing membranes with slit-like pores, the phase transition behavior of this LC mixture at various mole fractions of RM257, and the impact of mole fraction of RM257 in the liquid crystal (LC) mixture and membrane manufacturing conditions …

Let's Get Serious About It: Plastic-Free Campus Initiative, Geoffrey Kain, Camdyn Doucette, Regan Bossie

Sustainability Conference

On February 23, 2022, the UN agreed to start negotiating a world-first global treaty on plastic waste--since nearly 200 nations unanimously agreed to move toward a legally binding plastics treaty by 2024. In 2019 the UN Environmental Programme report highlighted that "our world is drowning in plastic." As with the climate change crisis (to which plastics production and disposal are also linked), the data resoundingly illustrate the imminent systemic threat that disposable plastics pose to the world's seas, freshwater sources, soils, food supply, air, and species. Nevertheless, plastics production is predicted to rise dramatically over the next 20 years, with …

Discussion Of Materials Science Development Trend Through Climate Change, Manufacturing Update, National Security And Materials Genome Initiative, Weijian Lin, Bowen Zhang, Weihua Wang

Bulletin of Chinese Academy of Sciences (Chinese Version)

New materials are considered as the foreguide and the base of the revolution of advanced technology. Its development and trend of new materials greatly influences the human life and society development. Nowadays, the risk of climate change is increasing day by day, the pressure of manufacturing update of new technology revolution is bigger than ever, the competition and the friction between countries become more and more intense, and the iteration of advanced materials turns to a rigid demand. In this work, we analyze and predict the development tread of material from the aspects of climate change, manufacturing update, national security, …

Development Strategy Of China’S Advanced Material Industry Cluster, Kun Zeng, Xiaopeng Li, Ziyun Shen, Fan Liao, Jinsong Xiao, Qingli Huang

Bulletin of Chinese Academy of Sciences (Chinese Version)

The advanced material industry is a basic and strategic industry of the national economy, as well as the key area of global competition in technology industry. Under the dual-cycle development pattern, propelling the cluster development of advanced material industry has become a key to raise the level of the advanced material industry development. This article described the spatial distribution of the advanced material industry cluster in China, analyzed the characteristics and development stage of the advanced material industrial cluster, and compared the gap between the advanced material industry cluster in China and the world-class advanced manufacturing industry cluster. In addition, …

Development And Thinking Of Silicon Photonics Heterogenous Integration, Zihao Wang, Ting Wang, Jianjun Zhang

Bulletin of Chinese Academy of Sciences (Chinese Version)

Integrated photonics are fast-developing research field for next generation information technology. Current silicon photonic integrated chips strongly benefit from low-cost and high-density integration properties of existing CMOS technology. But limited by the physical properties of silicon, it is not a perfect material for different types of optoelectronic devices, such as laser sources, modulators, and infrared detectors. Therefore, heterogeneous integration is proposed by combining the advantages of CMOS process and superior opto-electric properties of heterogenous material systems, that can be an essential step towards next generation integrated optoelectronic chips. Here, this paper introduces the rapid progress of integrated photonics nationally and …

Two-Dimensional Materials: From Fundamental To Application, Guangyu Zhang, Geng Long, Shenghuang Lin, Lede Xian, Yan Jiang, Hao Wu, Shuopei Wang, Na Li

Bulletin of Chinese Academy of Sciences (Chinese Version)

The rapid development of the information society puts forward an ever-increasing urgent need for information storage, processing, and transmission capabilities. With the ending of Moore's Law, the semiconductor industry urgently needs to find new solutions. Lowdimensional materials are considered to be a new breakthrough in the semiconductor industry in the post-Moore era, because of the size characteristics of atomic-level thickness, the structural advantage of no dangling bonds on the surface, and the sensitivity to electrical and optical control methods caused by a large specific surface area. Songshan Lake Materials Laboratory has introduced a group of top scientists and established a …

Development Strategies Of New Energy Materials For Carbon Peak And Neutrality—Case Study Of Songshan Lake Materials Laboratory, Ximei Qiu, Yan Wang, Haiming Lyu, Jian Xu, Yida Wu, Xiaowei Ma, Chunyi Zhi, Xiaolong Du, Xuejie Huang

Bulletin of Chinese Academy of Sciences (Chinese Version)

Transformative energy technologies will provide strong strategic support to the realization of peaking carbon dioxide emissions before 2030, and achieving net zero carbon emissions before 2060. Reducing the dependence on fossil fuels by saving energy and reducing emissions from the source is essential to achieve the double-carbon target as soon as possible. Songshan Lake Materials Laboratory is working on key materials to develop solar-battery power systems and electrification of transportation energy to return coal, oil, and natural gas from fuels to materials. This study focuses on introducing the research team of its New Energy Materials and Devices R&D Center with …

Life Cycle Assessment Of Pasture-Based Agrivoltaic Systems: Emissions And Energy Use Of Integrated Rabbit Production, Alexis Pascaris, Robert Handler, Chelsea Schelly, Joshua Pearce

Michigan Tech Publications

Agrivoltaic systems, which deliberately maximize the utility of a single parcel of land for both solar photovoltaic (PV) electricity production and agriculture, have been demonstrated as a viable technology that can ameliorate competing land uses and meet growing energy and food demands efficiently. The goal of this study is to assess the environmental impacts of a novel pasture-based agrivoltaic concept: co-farming rabbits and solar PV. A life cycle assessment (LCA) quantified the impacts of 1) the integrated agrivoltaic concept in comparison to conventional practices including 2) separate rabbit farming and PV production and 3) separate rabbit farming and conventional electricity …

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

Findings Report: Virtual Workshop On ‘Resilient Supply Of Critical Minerals’, Marek Locmelis, Angela D. Lueking, Michael S. Moats, Kwame Awuah-Offei, Lana Z. Alagha, Mark W. Fitch, Alanna Krolikowski, Shelby Clark

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Executive Summary
On August 2-3, 2021, the Thomas J. O’Keefe Institute for Sustainable Supply of Strategic Minerals at Missouri University of Science and Technology (Missouri S&T) hosted the NSF-funded virtual workshop ‘Resilient Supply of Critical Minerals’. The workshop was convened via Zoom and attracted 158 registrants, including 108 registrants from academia (61 students), 30 registrants from government agencies, and 20 registrants from the private sector. Four topical sessions were covered:

A. Mineral Exploration and Source Diversification.
B. Supply Chain and Policy Issues.
C. Improving Mineral Recycling and Reprocessing Technologies.
D. Technological Alternatives to Critical Minerals.

Each topical session was composed …

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

Design And Control Of A Peristaltic Pump To Simulate Left Atrial Pressure In A Conductive Silicone Model, Jeremy Collins

Mechanical Engineering Undergraduate Honors Theses

According to the CDC, atrial fibrillation is responsible for more than 454,000 hospitalizations and approximately 158,000 deaths per year. A common treatment for atrial fibrillation is catheter ablation, a process in which a long flexible tube is guided through the femoral artery and to the source of arrhythmia in the heart, where it measures the electrical potential at various locations and converts problematic heart tissue to scar tissue via ablation. This paper details the design and control of a low-cost ($400) peristaltic pump system using repetitive control to replicate blood pressure in the left atrium in a conductive silicone model …

Performance And Economics Of Solar Inverters And Module Level Power Electronics In A 1 Mw Photovoltaic System, Maxwell Criswell

Biological and Agricultural Engineering Undergraduate Honors Theses

Photovoltaic solar panels convert sunlight to electricity in the form of direct current; therefore, a necessary component of every photovoltaic system is an inverter to convert the electricity to usable alternating current. There are various commercially available inverter technologies manufactured today such as microinverters, string inverters, and central inverters, as well as module level power electronic devices such as DC optimizers that are capable of improving system performance in string and central inverter systems. This thesis compares the performance and economics of five different inverter and module level power electronic systems through model simulation using Helioscope software. The five alternatives …

U.S. Potential Of Sustainable Backyard Distributed Animal And Plant Protein Production During And After Pandemics, Theresa K. Meyer, Alexis Pascaris, David Denkenberger, Joshua M. Pearce

Michigan Tech Publications

To safeguard against meat supply shortages during pandemics or other catastrophes, this study analyzed the potential to provide the average household’s entire protein consumption using either soybean production or distributed meat production at the household level in the U.S. with: (1) pasture-fed rabbits, (2) pellet and hay-fed rabbits, or (3) pellet-fed chickens. Only using the average backyard resources, soybean cultivation can provide 80-160% of household protein and 0- 50% of a household’s protein needs can be provided by pasture-fed rabbits using only the yard grass as feed. If external supplementation of feed is available, raising 52 chickens while also harvesting …

Comparing The Environmental Impacts Of Using Mass Timber And Structural Steel, Khang Hoang Nguyen, Steelee Knight Morgan

Construction Management

Although mass timber has seen a gradual rise in demand in the past, there has been a lack of extensive research on the environmental impacts of using mass timber as a primary structural framing material. This paper compares structural steel, and mass timber’s total embodied carbon emissions. Accurate estimates were made using plans and specs for different projects retrieved from semi-structured interviews. The estimates were input through the EC3 Calculator to provide extensive total carbon emissions measurements between each construction material. Using structural steel framing increased the project’s overall environmental impact by roughly 84% compared to using mass timber. The …

Scale Model Test To Estimate Thermal Damage By Fire In Aircraft Cargo, Jian Gao, Tsuneyoshi Matsuoka, Yuji Nakamura

Progress in Scale Modeling, an International Journal

The Federal Aviation Administration (FAA) requires fire detectors to alarm within one minute of the start of a fire in cargo compartments of airplanes. To determine whether such alarm timing works, investigations of the thermal damage to ceilings and other structures during the early stage of a fire were accomplished to demonstrate compliance with these FAA regulations. The objective was to test the feasibility of predicting convective heat transfer in early stage of a cargo compartment fire by conducting reduced scale (lab scale) experiments. First, the scaling laws was derived and validated. Then, full-scale and half-scale experiments were performed with …

Research Trend Of Metal Matrix Composites Reinforced With Silica Extracted By Green Route: A Bibliometric Analysis, Rinku Datkhile, Meena Laad, Babaji Ghule

Library Philosophy and Practice (e-journal)

Metal Matrix Composites have acquired an important place in the engineering applications due to their distinctive characteristics such as high specific strength, lower specific gravity, improved material stiffness, better durability, enhanced creep and fatigue strength etc. Worldwide scientists are working on the improvement of mechanical properties of composite materials. The present work attempts to summarise all the research carried out on metal matrix composites reinforced with silica extracted by green route and provides up-to-date research material for researchers who are interested in the field of composites with metal matrices. Scopus databases and software such as Gephi Vos Viewer and Table2Net …

A First Investigation Of Agriculture Sector Perspectives On The Opportunities And Barriers For Agrivoltaics, Alexis Pascaris, Chelsea Schelly, Joshua M. Pearce

Michigan Tech Publications

Agrivoltaic systems are a strategic and innovative approach to combine solar photovoltaic (PV)-based renewable energy generation with agricultural production. Recognizing the fundamental importance of farmer adoption in the successful diffusion of the agrivoltaic innovation, this study investigates agriculture sector experts’ perceptions on the opportunities and barriers to dual land-use systems. Using in-depth, semistructured interviews, this study conducts a first study to identify challenges to farmer adoption of agrivoltaics and address them by responding to societal concerns. Results indicate that participants see potential benefits for themselves in combined solar and agriculture technology. The identified barriers to adoption of agrivoltaics, however, include: …