Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Publication
- Publication Type
Articles 1 - 11 of 11
Full-Text Articles in Physics
Free Charge Carrier Properties In Two-Dimensional Materials And Monoclinic Oxides Studied By Optical Hall Effect, Sean Knight
Free Charge Carrier Properties In Two-Dimensional Materials And Monoclinic Oxides Studied By Optical Hall Effect, Sean Knight
Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research
In this dissertation, optical Hall effect (OHE) measurements are used to determine the free charge carrier properties of important two-dimensional materials and monoclinic oxides. Two-dimensional material systems have proven useful in high-frequency electronic devices due to their unique properties, such as high mobility, which arise from their two-dimensional nature. Monoclinic oxides exhibit many desirable characteristics, for example low-crystal symmetry which could lead to anisotropic carrier properties. Here, single-crystal monoclinic gallium oxide, an AlInN/GaN-based high-electron-mobility transistor (HEMT) structure, and epitaxial graphene are studied as examples. To characterize these material systems, the OHE measurement technique is employed. The OHE is a physical …
Plasmonic Grating Geometrics And Wavelength-Dependent Focus Depth In Infrared Detectors, Patrick R. Kennedy
Plasmonic Grating Geometrics And Wavelength-Dependent Focus Depth In Infrared Detectors, Patrick R. Kennedy
Theses and Dissertations
The objective for this research is to determine a relationship between plasmonic grating geometries and the wavelength-dependent focus depth. This research is focused on enhancing the signal collected by infrared detectors by using a metal grating as a planar lens to focus light in the detecting region of the substrate. This can be used to maintain a thinner absorbing region and possibly to create multi-color imaging in a single pixel. Simulations demonstrate that the plasmonic lens is capable of creating a wavelength dependent focus spot.
Probing The Wave Nature Of Light-Matter Interaction, D. E. Boone, C. H. Jackson, A. T. Swecker, J. S. Hergenrather, K. S. Wenger, O. Kokhan, Balša Terzić, I. Melnikov, I. N. Ivanov, E. C. Stevens, G. Scarel
Probing The Wave Nature Of Light-Matter Interaction, D. E. Boone, C. H. Jackson, A. T. Swecker, J. S. Hergenrather, K. S. Wenger, O. Kokhan, Balša Terzić, I. Melnikov, I. N. Ivanov, E. C. Stevens, G. Scarel
Physics Faculty Publications
The wave-particle duality of light is a controversial topic in modern physics. In this context, this work highlights the ability of the wave-nature of light on its own to account for the conservation of energy in light-matter interaction. Two simple fundamental properties of light as wave are involved: its period and its power P. The power P depends only on the amplitude of the wave’s electric and magnetic fields (Poynting’s vector), and can easily be measured with a power sensor for visible and infrared lasers. The advantage of such a wave-based approach is that it unveils unexpected effects of light’s …
Fabrication Of Infrared Photodetectors Utilizing Lead Selenide Nanocrystals, Justin Anthony Hill
Fabrication Of Infrared Photodetectors Utilizing Lead Selenide Nanocrystals, Justin Anthony Hill
Graduate Theses and Dissertations
Colloidal lead selenide and lead selenide / lead sulfide core/shell nanocrystals were grown using a wet chemical synthesis procedure. Absorbance and photoluminescence measurements were made to verify the quality of the produced nanocrystals. Absorbance spectra were measured at room temperature, while photoluminescence spectra were measured at 77 K. Organic ligands were exchanged for shorter ligands in order to increase the conductivity of the nanocrystals. Absorption and PL spectra for both core and core/shell nanocrystals were compared. Interdigital photodetector devices with varying channel widths were fabricated by depositing gold onto a glass substrate. Lead selenide nanocrystals were deposited onto these metallic …
High-Resolution Image Reconstruction From A Sequence Of Rotated And Translated Frames And Its Application To An Infrared Imaging System, Russell C. Hardie, Kenneth J. Barnard, John G. Bognar, Ernest E. Armstrong, Edward A. Watson
High-Resolution Image Reconstruction From A Sequence Of Rotated And Translated Frames And Its Application To An Infrared Imaging System, Russell C. Hardie, Kenneth J. Barnard, John G. Bognar, Ernest E. Armstrong, Edward A. Watson
Russell C. Hardie
Some imaging systems employ detector arrays that are not sufficiently dense to meet the Nyquist criterion during image acquisition. This is particularly true for many staring infrared imagers. Thus, the full resolution afforded by the optics is not being realized in such a system. This paper presents a technique for estimating a high-resolution image, with reduced aliasing, from a sequence of undersampled rotated and translationally shifted frames. Such an image sequence can be obtained if an imager is mounted on a moving platform, such as an aircraft. Several approaches to this type of problem have been proposed in the literature. …
Large Area Conformal Infrared Frequency Selective Surfaces, Jeffrey D'Archangel
Large Area Conformal Infrared Frequency Selective Surfaces, Jeffrey D'Archangel
Electronic Theses and Dissertations
Frequency selective surfaces (FSS) were originally developed for electromagnetic filtering applications at microwave frequencies. Electron-beam lithography has enabled the extension of FSS to infrared frequencies; however, these techniques create sample sizes that are seldom appropriate for real world applications due to the size and rigidity of the substrate. A new method of fabricating large area conformal infrared FSS is introduced, which involves releasing miniature FSS arrays from a substrate for implementation in a coating. A selective etching process is proposed and executed to create FSS particles from crossed-dipole and square-loop FSS arrays. When the fill-factor of the particles in the …
Broad Bandwidth, All-Fiber, Thulium-Doped Photonic Crystal Fiber Amplifier For Potential Use In Scaling Ultrashort Pulse Peak Powers, Alex Sincore
Electronic Theses and Dissertations
Fiber based ultrashort pulse laser sources are desirable for many applications; however generating high peak powers in fiber lasers is primarily limited by the onset of nonlinear effects such as self-phase modulation, stimulated Raman scattering, and self-focusing. Increasing the fiber core diameter mitigates the onset of these nonlinear effects, but also allows unwanted higher-order transverse spatial modes to propagate. Both large core diameters and single-mode propagation can be simultaneously attained using photonic crystal fibers. Thulium-doped fiber lasers are attractive for high peak power ultrashort pulse systems. They offer a broad gain bandwidth, capable of amplifying sub-100 femtosecond pulses. The longer …
Commissioning Of The Asta Laser Lab With Uv Pulse Length Characterization, Daniel Kelley, Jeff Corbett
Commissioning Of The Asta Laser Lab With Uv Pulse Length Characterization, Daniel Kelley, Jeff Corbett
STAR Program Research Presentations
The Linac Coherent Light Source (LCLS) at SLAC depends on a photocathode electron gun to provide the linear accelerator with the raw material – electrons – used for making X-ray laser pulses. The photocathode used in the LCLS Injector is a clean copper plate in high vacuum. When the cathode is struck with high energy UV light, electrons are liberated from its surface and then accelerated down the linac with radio-frequency electric fields. These fast-moving bunches of electrons are directed through an undulator magnet to radiate X-ray light.
Although scientists have been using photocathode techniques at SLAC for 25 years, …
Infrared Tapered Slot Antennas Coupled To Tunnel Diodes, Louis A. Florence
Infrared Tapered Slot Antennas Coupled To Tunnel Diodes, Louis A. Florence
Electronic Theses and Dissertations
Tapered slot antennas (TSAs) have seen considerable application in the millimeter-wave portion of the spectrum. Desirable characteristics of TSAs include symmetric E- and H-plane antenna patterns, and broad non-resonant bandwidths. We investigate extension of TSA operation toward higher frequencies in the thermal infrared (IR), using a metal-oxide-metal diode as the detector. Several different infrared TSA design forms are fabricated using electronbeam lithography and specially developed thin-film processes. The angular antenna patterns of TSA-coupled diodes are measured at 10.6 micrometer wavelength in both E- and H-planes, and are compared to results of finite-element electromagnetic modeling using Ansoft HFSS. Parameter studies are …
Antenna-Coupled Infrared And Millimeter-Wave Detectors: Fabrication, Measurement And Optimization, Charles Middleton
Antenna-Coupled Infrared And Millimeter-Wave Detectors: Fabrication, Measurement And Optimization, Charles Middleton
Electronic Theses and Dissertations
Antenna-coupled detectors provide uncooled, cost-effective solutions for infrared and millimeter-wave imaging. This work describes the design, fabrication, measurement, and optimization of several types of antenna-coupled detectors for LWIR (8 - 12 µm) and 94 GHz radiation. Two types of millimeter-wave antenna-coupled detectors were fabricated and tested: a slot antenna coupled to a bolometer, and a patch antenna coupled to a SiC Schottky diode. Electromagnetic modeling of the antennas helped guide the design of antennas with better impedance matching to the detectors. Schottky diodes are discussed as detectors for millimeter-wave and infrared radiation, with the goal of increasing the cutoff frequency …
High-Resolution Image Reconstruction From A Sequence Of Rotated And Translated Frames And Its Application To An Infrared Imaging System, Russell C. Hardie, Kenneth J. Barnard, John G. Bognar, Ernest E. Armstrong, Edward A. Watson
High-Resolution Image Reconstruction From A Sequence Of Rotated And Translated Frames And Its Application To An Infrared Imaging System, Russell C. Hardie, Kenneth J. Barnard, John G. Bognar, Ernest E. Armstrong, Edward A. Watson
Electrical and Computer Engineering Faculty Publications
Some imaging systems employ detector arrays that are not sufficiently dense to meet the Nyquist criterion during image acquisition. This is particularly true for many staring infrared imagers. Thus, the full resolution afforded by the optics is not being realized in such a system. This paper presents a technique for estimating a high-resolution image, with reduced aliasing, from a sequence of undersampled rotated and translationally shifted frames. Such an image sequence can be obtained if an imager is mounted on a moving platform, such as an aircraft. Several approaches to this type of problem have been proposed in the literature. …