Physics Commons^™

Development Of High Quantum Efficiency Strained Superlattice Spin Polarized Photocathodes Via Metal Organic Chemical Vapor Deposition, Benjamin Belfore

Electrical & Computer Engineering Theses & Dissertations

Spin polarized photocathodes are necessary to examine parity violations and other fundamental phenomena in the field of high energy physics. To create these devices, expensive and complicated growth processes are necessary. While integral to accelerator physics, spin polarized electrons could have other exciting applications in materials science and other fields of physics. In order to explore these other applications feasibly, the relative supply of spin polarized photocathodes with a high rate of both polarization and photoemission needs to be increased. One such way to increase this supply is to develop the means to grow them faster and at a larger …

Electrostatic Design And Characterization Of A 200 Kev Photogun And Wien Spin Rotator, Gabriel G. Palacios Serrano

Electrical & Computer Engineering Theses & Dissertations

High-energy nuclear physics experiments at the Jefferson Lab Continuous Electron Beam Accelerator Facility (CEBAF) require high spin-polarization electron beams produced from strained super-lattice GaAs photocathodes activated to negative electron affinity in a high voltage photogun operating at 130 kV dc. A pair of Wien filter spin rotators in the injector provides precise control of the electron beam polarization at the end station target. An upgrade of the CEBAF injector to better support the upcoming Moller experiment requires increasing the electron beam energy to 200 keV, resulting in better transmission through injector apertures and improved photocathode lifetime. In addition, the energy …

Commissioning & Characterization Of Magnetized Gridded Thermionic Electron Source, Mark Stefani

Electrical & Computer Engineering Theses & Dissertations

Collaborative efforts to design and fabricate a magnetized gridded thermionic electron source have been conducted between Xelera and Jefferson Lab. Commissioning and characterization of an electron gun fabricated by Xelera was performed to benchmark the viability of future electron source designs and capabilities. The work involved simulation, installation, trouble-shooting, modifications of the design, commissioning, characterization, and magnetization of the electron beam produced. A specially designed cavity as well as novel diagnostic tools and methods were developed, implemented, and experimentally tested. Finally, the gun was used to demonstrate a previously unachieved current of magnetized electron beam from a gridded thermionic source …

Demonstration Of Visible And Near Infrared Raman Spectrometers And Improved Matched Filter Model For Analysis Of Combined Raman Signals, Alexander Matthew Atkinson

Electrical & Computer Engineering Theses & Dissertations

Raman spectroscopy is a powerful analysis technique that has found applications in fields such as analytical chemistry, planetary sciences, and medical diagnostics. Recent studies have shown that analysis of Raman spectral profiles can be greatly assisted by use of computational models with achievements including high accuracy pure sample classification with imbalanced data sets and detection of ideal sample deviations for pharmaceutical quality control. The adoption of automated methods is a necessary step in streamlining the analysis process as Raman hardware becomes more advanced. Due to limits in the architectures of current machine learning based Raman classification models, transfer from pure …

Laser-Spark Multicharged Ion Implantation System ‒ Application In Ion Implantation And Neural Deposition Of Carbon In Nickel (111), Oguzhan Balki

Electrical & Computer Engineering Theses & Dissertations

Carbon ions generated by ablation of a carbon target using an Nd:YAG laser pulse (wavelength λ = 1064 nm, pulse width τ = 7 ns, and laser fluence of 10-110 J/cm²) are characterized. Time-of-flight analyzer, a three-mesh retarding field analyzer, and an electrostatic ion energy analyzer are used to study the charge and energy of carbon ions generated by laser ablation. The dependencies of the ion signal on the laser fluence, laser focal point position relative to target surface, and the acceleration voltage are described. Up to C⁴⁺ are observed. When no acceleration voltage is applied between …

Pulse Power Effects On Transient Plasma Ignition For Combustion, David Wayne Alderman Ii

Electrical & Computer Engineering Theses & Dissertations

Transient plasma ignition (TPI) uses highly non-equilibrium plasmas, driven by less than 100 nanosecond, high-voltage pulses, to initiate combustion. The effects of pulse repetition frequency (PRF) and ultrashort nanosecond rise times on TPI are investigated in this work using lean, stoichiometric, and rich air-fuel mixtures at atmospheric pressure. Experimental data show the transient plasmas driven by ultrashort rise time, high voltage pulses at high PRF’s enhance the combustion of lean or stoichiometric air-methane mixtures in a static chamber. In particular, increasing PRF enhances the combustion performance by means of reduced delay times independent of the equivalence ratio of the air-fuel …

Generation Of Large-Volume Diffuse Plasma By An External Ionization Wave From A Single-Electrode Plasma Jet, Seyed Hamid Razavi Barzoki

Electrical & Computer Engineering Theses & Dissertations

A non-thermal transient diffuse plasma can be generated remotely in a nonconductive reduced pressure chamber by an external guided fast ionization wave (FIW). We found that an atmospheric-pressure low-temperature plasma jet (APPJ) can be a source of FIW which transfers an enhanced electric field at the wave front across a reduced pressure Pyrex glass chamber with no electrical connection to the chamber. Here, we studied the formation and propagation of the APPJ plasma, the interaction of atmospheric-pressure guided FIW with a dielectric surface which forms the wall of the reduced-pressure system, and the formation and propagation of the reduce-pressure FIW …

Development Of A Laser-Spark Multicharged Ion System – Application In Shallow Implantation Of Sic By Boron And Barium, Md. Haider Ali Shaim

Electrical & Computer Engineering Theses & Dissertations

A novel multicharged ion source, using laser ablation induced plasma coupled with spark discharge, has been investigated in this work. The designed and demonstrated ion source is cost-effective, compact and versatile. Experiments are described with the intention of demonstrating the practicability of ion implantation via laser ion source.

Multicharged aluminum ions are generated by a ns Q-switched Nd:YAG laser pulse ablation of an aluminum target in an ultrahigh vacuum. The experiments are conducted using laser pulse energies of 45–90 mJ focused on the Al target surface by a lens with an 80-cm focal length to 0.0024 cm² spot area …

Low Temperature Plasma For The Treatment Of Epithelial Cancer Cells, Soheila Mohades

Electrical & Computer Engineering Theses & Dissertations

Biomedical applications of low temperature plasmas (LTP) may lead to a paradigm shift in treating various diseases by conducting fundamental research on the effects of LTP on cells, tissues, organisms (plants, insects, and microorganisms). This is a rapidly growing interdisciplinary research field that involves engineering, physics, life sciences, and chemistry to find novel solutions for urgent medical needs. Effects of different LTP sources have shown the anti-tumor properties of plasma exposure; however, there are still many unknowns about the interaction of plasma with eukaryotic cells which must be elucidated in order to evaluate the practical potential of plasma in cancer …

Numerical Studies And Optimization Of Magnetron With Diffraction Output (Mdo) Using Particle-In-Cell Simulations, Alireza Majzoobi

Electrical & Computer Engineering Theses & Dissertations

The first magnetron as a vacuum-tube device, capable of generating microwaves, was invented in 1913. This thesis research focuses on numerical simulation-based analysis of magnetron performance. The particle-in-cell (PIC) based MAGIC software tool has been utilized to study the A6 and the Rising-Sun magnetron structures, and to obtain the optimized geometry for optimizing the device performance. The A6 magnetron is the more traditional structure and has been studied more often. The Rising-Sun geometry, consists of two alternating groups of short and long vanes in angular orientation, and was created to achieve mode stability.

The effect of endcaps, changes in lengths …

Ionizing Radiation Detection Using Microstructured Optical Fiber, Stanton Dehaven

Electrical & Computer Engineering Theses & Dissertations

Ionizing radiation detecting microstructured optical fibers are fabricated, modeled and experimentally measured for X-ray detection in the 10-40 keV energy range. These fibers operate by containing a scintillator material which emits visible light when exposed to ionizing radiation. An X-ray source characterized with a CdTe spectrometer is used to quantify the X-ray detection efficiency of the fibers. The solid state CdTe detector is considered 100% efficient in this energy range. A liquid filled microstructured optical fiber (MOF) is presented where numerical analysis and experimental observation leads to a geometric theory of photon transmission using total internal reflection. The model relates …

Investigation Of Nbnx Thin Films And Nanoparticles Grown By Pulsed Laser Deposition And Thermal Diffusion, Ashraf Hassan Farha

Electrical & Computer Engineering Theses & Dissertations

Niobium nitride films (NbNx) were grown on Nb and Si (100) substrates using pulsed laser deposition (PLD), laser heating, and thermal diffusion methods. Niobium nitride films were deposited on Nb substrates using PLD with a Q-switched Nd: YAG laser (λ = 1064 nm, 40 ns pulse width, and 10 Hz repetition rate) at different laser fluences, different nitrogen background pressures and deposition temperatures. The effect of changing PLD parameters for films done by PLD was studied. The seen observations establish guidelines for adjusting the laser parameters to achieve the desired morphology and phase of the grown NbNx films.

When the …

Optimization Framework For A Radio Frequency Gun Based Injector, Alicia S. Hofler

Electrical & Computer Engineering Theses & Dissertations

Linear accelerator based light sources are used to produce coherent x-ray beams with unprecedented peak intensity. In these devices, the key parameters of the photon beam such as brilliance and coherence are directly dependent on the electron beam parameters. This leads to stringent beam quality requirements for the electron beam source. Radio frequency (RF) guns are used in such light sources since they accelerate electrons to relativistic energies over a very short distance, thus minimizing the beam quality degradation due to space charge effects within the particle bunch. Designing such sources including optimization of its beam parameters is a complex …

Synthesis Of Ald Zinc Oxide And Thin Film Materials Optimization For Uv Photodetector Applications, Kandabara Nouhoum Tapily

Electrical & Computer Engineering Theses & Dissertations

Zinc oxide (ZnO) is a direct, wide bandgap semiconductor material. It is thermodynamically stable in the wurtzite structure at ambient temperature conditions. ZnO has very interesting optical and electrical properties and is a suitable candidate for numerous optoelectronic applications such as solar cells, LEDs and UV-photodetectors. ZnO is a naturally n-type semiconductor. Due to the lack of reproducible p-type ZnO, achieving good homojunction ZnO-based photodiodes such as UV-photodetectors remains a challenge. Meanwhile, heterojunction structures of ZnO with p-type substrates such as SiC, GaN, NiO, AlGaN, Si etc. are used; however, those heterojunction diodes suffer from low efficiencies. ZnO is an …

Characterizations Of Atmospheric Pressure Low Temperature Plasma Jets And Their Applications, Erdinc Karakas

Electrical & Computer Engineering Theses & Dissertations

Atmospheric pressure low temperature plasma jets (APLTPJs) driven by short pulses have recently received great attention because of their potential in biomedical and environmental applications. This potential is due to their user-friendly features, such as low temperature, low risk of arcing, operation at atmospheric pressure, easy handheld operation, and low concentration of ozone generation. Recent experimental observations indicate that an ionization wave exists and propagates along the plasma jet. The plasma jet created by this ionization wave is not a continuous medium but rather consists of a bullet-like-structure known as "Plasma Bullet". More interestingly, these plasma bullets actually have a …

Experimental Investigation Of A Non-Thermal Atmospheric Pressure Plasma Jet, Asma Begum

Electrical & Computer Engineering Theses & Dissertations

The main objective of this dissertation is to understand the formation of the plasma jet from the plasma pencil, and the propagation of the plasma jet in the ambient atmosphere where the effect of the external electric field is almost zero. Before investigating the formation and propagation phenomenon of the plasma jet, common physical properties of plasma jets are determined by using the imaging technique and optical emission spectroscopy. The first goal of this dissertation is to establish the laminar helium gas flow channel through a plasma pencil.

The formation position, formation time, and the criterion of the plasma jet …

Simultaneous Higher Harmonic Detection And Extraction Of Information From Oxygen Spectra, Karan Dineshchandra Mohan

Electrical & Computer Engineering Theses & Dissertations

Wavelength Modulation Spectroscopy (WMS) is a highly sensitive technique that utilizes synchronous detection at the N-th harmonics of a modulating frequency, by modulating the laser beam used to probe a gaseous species. The advantage of this technique lies in the greater effective signal-to-noise ratio one obtains as a direct consequence of the larger amount of structure present in the higher harmonics, and thus a greater amount of information that can be obtained from that structure. We present the development of a novel technique where data at multiple harmonics is obtained simultaneously, rather than sequentially. This removes the susceptibility of the …

Reflection High-Energy Electron Diffraction Studies Of Indium Phosphide (100) And Growth On Indium And Indium Nitride On Silicon (100), Mohamed Abd-Elsattar Hafez

Electrical & Computer Engineering Theses & Dissertations

Study of the effects of atomic hydrogen exposure on structure and morphology of semiconductor surfaces is important for fundamental properties and applications. In this dissertation, the electron yield of a hydrogen-cleaned indium phosphide (InP) surface was measured and correlated to the development of the surface morphology, which was monitored by in situ reflection high-energy electron diffraction (RHEED). Atomic hydrogen treatment produced a clean, well-ordered, and (2x4)-reconstructed InP(100) surface. The quantum efficiency, after activation to negative electron affinity, and the secondary electron emission were shown to increase with hydrogen cleaning time. RHEED patterns of low-index InP(100) surface were modified by the …

Self-Organization In Cathode Boundary Layer Discharges, Nobuhiko Takano

Electrical & Computer Engineering Theses & Dissertations

Cathode boundary layer (CBL) discharge, which has been developed as a UV light source, operates in a direct current between a planar cathode and a ring-shape anode that are separated by a dielectric with an opening of the same diameter as the anode. The nonthermal CBL discharges operate in a medium pressure range down to 30 Torr, emitting excimer radiation when operated with noble gases. The radiant excimer emittance at 172 nm in xenon reaches 1.7 W/cm², and a maximum excimer efficiency of 6 % has been obtained. The high excimer radiant emittance, in addition to low cost …

Femtosecond Laser Ablation With Single And Two-Photon Excitation For Mems, Mohamed Abdelfattah Kottb Ahmad Elbandrawy

Electrical & Computer Engineering Theses & Dissertations

There is an increasing interest in femtosecond laser micromachining of materials because of the femtosecond laser's unique high peak power, ultrashort pulse width, negligible heat conductivity process during the laser pulse, and the minimal heat affected zone, which is in the same order of magnitude of the ablated submicron spot. There are some obstacles in reaching optimal and reliable micromachining parameters. One of these obstacles is the lack of understanding of the nature of the interaction and related physical processes. These processes include amorphization, melting, re-crystallization, nucleated-vaporization, and ablation.

The focus of this Dissertation was to study the laser-matter interaction …

Dynamical Studies Of Model Membrane And Cellular Response To Nanosecond, High-Intensity Pulsed Electric Fields, Qin Hu

Electrical & Computer Engineering Theses & Dissertations

The dynamics of electroporation of biological cells subjected to nanosecond, high intensity pulses are studied based on a coupled scheme involving the current continuity and Smoluchowski equations. The improved pore formation energy model includes a dependence on pore population and density. It also allows for variable surface tension and incorporates the effects of finite conductivity on the electrostatic correction term, which was not considered by the simple energy models in the literature. It is shown that E(r) becomes self-adjusting with variations in its magnitude and profile. The whole scheme is self-consistent and dynamic.

An electromechanical analysis based on thin-shell theory …

Scaling And Characterization Of Direct Current Glow Discharge Plasma In Atmospheric Air, Abdel-Aleam Hefney Mohamed

Electrical & Computer Engineering Theses & Dissertations

A microhollow cathode discharge was used as a plasma cathode to sustain a stable direct current glow discharge in atmospheric pressure air. The volumetric scale of glow discharge increased from the millimeter to the centimeter range by extending the plasma in lateral and axial directions. In the axial direction, the length of the glow discharge column was varied from 1 mm to 2 cm, with the sustaining voltage increasing linearly with the glow discharge column length. Extension in the lateral direction was obtained by operating discharges in parallel. The glow discharge plasma of the parallel discharge columns was found to …

Microdischarge Arrays, Wenhui Shi

Electrical & Computer Engineering Theses & Dissertations

Microhollow cathode discharges (MHCDs) are DC or pulsed gas discharges between two electrodes, separated by a dielectric, and containing a concentric hole. The diameter of the hole, in this hollow cathode configuration, is in the hundred-micrometer range. MHCDs satisfy the two conditions necessary for an efficient excimer radiation sources: (1) high energy electrons which are required to provide a high concentration of excited or ionized rare gas atoms; (2) high pressure operation which favors excimer formation (a three-body process). Flat panel excimer sources require parallel operation of MHCDs. Based on the current-voltage characteristics of MHCD discharges, which have positive slopes …

Development Of An Efficient Ti:Sapphire Laser Transmitter For Atmospheric Ozone Lidar Measurements, Khaled A. Elsayed

Electrical & Computer Engineering Theses & Dissertations

The impetus of this work was to develop an all solid-state Ti:sapphire laser transmitter to replace the current dye lasers that could provide a potentially compact, robust, and highly reliable laser transmitter for differential absorption lidar measurements of atmospheric ozone. Two compact, high-energy pulsed, and injection-seeded Ti:sapphire lasers operating at a pulse repetition frequency of 30 Hz and wavelengths of 867 nm and 900 nm, with M² of 1.3, have been experimentally demonstrated and compared to model results. The Ti:sapphire lasers have shown the required output beam quality at maximum output pulse energy, 115 mJ at 867 nm and …

Coherent Differential Absorption Lidar For Combined Measurement Of Wind And Trace Atmospheric Gases, Grady James Koch

Electrical & Computer Engineering Theses & Dissertations

A lidar system was developed for making combined range-resolved measurements of wind speed and direction, water vapor concentration, and carbon dioxide concentration in the atmosphere. This lidar combines the coherent Doppler technique for wind detection and the differential absorption lidar (DIAL) technique to provide a multifunctional capability. DIAL and coherent lidars have traditionally been thought of and implemented as separate instruments, but the research reported here has shown a demonstration of combining the coherent and DIAL techniques into a single instrument using solid-state lasers. The lasers used are of Ho:Tm:YLF, which operates at a wavelength of 2 μm. This wavelength …

Resolution Of Overlapping Spectra By Wavelength Modulation Spectroscopy, Audra Michiele Bullock

Electrical & Computer Engineering Theses & Dissertations

Wavelength modulation absorption spectroscopy is a highly sensitive, non-intrusive technique for probing gaseous species, which employs the well-known principles of modulation spectroscopy in a novel way. With this technique, parameters such as velocity, density, and temperature can be measured with a high degree of precision. The research presented here shows that wavelength modulation is a convenient means of increasing the sensitivity of an absorption spectroscopy measurement because it allows for harmonic detection. The focus of the dissertation is resolution of overlapping spectra by harmonic detection and the advantages gained by performing detection at the higher harmonics, e.g., sixth and eighth. …

Modelling An Optical Fiber Bragg Grating, Claudio Oliveira Egalon

Electrical & Computer Engineering Theses & Dissertations

A theoretical investigation of a single mode optical fiber with one and two superimposed Bragg grating is presented. The formulation relies in the determination of an approximate solution in the asymptotic region of one of the fiber parameters. A correction is then applied to the asymptotic solution using the Method of the Successive Approximations also known as the Piccard Method. The approximation was then compared to the numerical solution using the Runge-Kutta method. Assuming that each Bragg grating has modulation frequencies given by Ω₁ and Ω₂, it has been found that the second Bragg grating shifts the …

Compensation And Characterization Of Gallium Arsenide, Randy A. Roush

Electrical & Computer Engineering Theses & Dissertations

The properties of transition metals in gallium arsenide have been previously investigated extensively with respect to activation energies, but little effort has been made to correlate processing parameters with electronic characteristics. Diffusion of copper in gallium arsenide is of technological importance due to the development of GaAs:Cu bistable photoconductive devices. Several techniques are demonstrated in this work to develop and characterize compensated gallium arsenide wafers. The material is created by the thermal diffusion of copper into silicon-doped GaAs. Transition metals generally form deep and shallow acceptors in GaAs, and therefore compensation is possible by material processing such that the shallow …